DE150-201N09A
RF Power MOSFET
Directed En ergy, Inc.
An
IXYS Company
Preliminary Data Sheet
VDSS = 200 V
ID25 = 9.0 A
RDS(on) = 0.4 Ω
ΩΩ
Ω
PDHS = 80W
Symbol Test Conditions Maximum Ratings
VDSS TJ = 25°C to 150°C 200 V
VDGR TJ = 25°C to 150°C; RGS = 1 MΩ 200 V
VGS Continuous ±20 V
VGSM Transient ±30 V
ID25 Tc = 25°C 9.0 A
IDM Tc = 25°C, pulse width limited by TJM 54 A
IAR Tc = 25°C 9.0 A
EAR Tc = 25°C 7.5 mJ
IS ≤ IDM, di/dt ≤ 100A/µs, VDD ≤ VDSS,
Tj ≤ 150°C, RG = 0.2Ω
5 V/ns
IS = 0 >200 V/ns
PDHS Tc = 25°C
Derate 4.4W/°C above 25°C 80 W
PDAMB Tc = 25°C 3.5 W
TJ -55…+150 °C
TJM 150 °C
Tstg -55…+150 °C
TL 1.6mm (0.063 in) from case for 10 s 300 °C
Weight 2 g
dv/dt
Symbol Test Conditions Characteri stic Valu e s
TJ = 25°C unless otherwise specified
min. typ. max.
VDSS VGS = 0 V, ID = 3 ma 200 V
VGS(th) VDS = VGS, ID = 4 ma 2 3 4 V
IGSS VGS = ±20 VDC, VDS = 0 ±100 nA
IDSS VDS = 0.8 VDSS TJ = 25°C
VGS = 0 TJ = 125°C
25
250 µA
µA
RDS(on) 0.4
Ω
gfs VDS = 15 V, ID = 0.5ID25, pulse test 3.0 5.0 S
VGS = 15 V, ID = 0.5ID25
Pulse test, t ≤ 300µS, duty cycle d ≤ 2%
Features
•Isolated Substrate
−high isolation voltage (>2500V)
−excellent thermal transfer
−Increased temperature and power
cycling capability
•IXYS advanced low Qg process
•Low gate charge and capacitances
−easier to drive
−faster switching
•Low RDS(on)
•Very low insertion inductance (<2nH)
•No beryllium oxide (BeO) or other
hazardous materials
A dvantages
•Optimized for RF and high speed
switching at frequencies to >100MHz
•Easy to mount—no insulators needed
•High power density
N-Channel Enhancement Mode
Avalanche Rated
Low Qg and Rg
High dv/dt
Nanosecond Switching
DRAIN
SG1 SG2
GATE
SD1 SD2
DE150-201N09A
RF Power MOSFET
Directed En ergy, Inc.
An
IXYS Company
Symbol Test Conditions Characterist ic Value s
(TJ = 25°C unless otherwise specified)
min. typ. max.
RG
5 Ω
Ciss 600 pF
Coss VGS = 0 V, VDS = 0.8 VDSS(max),
f = 1 MHz 105 pF
Crss 12 pF
Td(on) 4 ns
Ton VGS = 15 V, VDS = 0.8 VDSS
ID = 0.5 IDM
RG = 0.2 Ω (External)
4 ns
Td(off) 4 ns
Toff 4 ns
Qg(on) 16 39 nC
Qgs VGS = 10 V, VDS = 0.5 VDSS
ID = 0.5 ID25 3.0 5.7 nC
Qgd 8.0 20 nC
RthJHS 1.5 K/W
Source-Drain Diode Charact eri stic Valu e s
(TJ = 25°C unless otherwise specified)
Symbol Test Conditions min. typ. max.
IS VGS = 0 V 9.0 A
ISM Repetitive; pulse width limited by TJM 54 A
VSD IF = IS, VGS = 0 V,
Pulse test, t ≤ 300 µs, duty cycle ≤ 2%
1.4 V
Trr
450 ns
Directed Energy, Inc. reserves the right to change limits, test conditions and dimensions.
DEI MOSFETS are covered by one or more of the following U.S. patents:
4,835,592 4,850,072 4,881,106 4,891,686 4,931,844 5,017,508
5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,486,715
5,381,025 5,640,045
DE150-201N09A
RF Power MOSFET
Directed En ergy, Inc.
An
IXYS Company
Directed Energy, Inc.
An IXYS Company
2401 Research Blvd., Suite 108
Fort Collins, CO USA 80526
970-493-1901 Fax: 970-493-1903
Email: deiinfo@directedenergy.com
Web: http://www.directedenergy.com
201N09A DE-SERIES SPICE Model
The DE-SERIES SPICE Model is illustrated in Figure 1. The model is an expan-
sion of the SPICE level 3 MOSFET model. It includes the stray inductive terms
LG, LS and LD. Rd is the RDS(ON) of the device, Rds is the resistive leakage term.
The output capacitance, COSS, and reverse transfer capacitance, CRSS are mod-
eled with reversed biased diodes. This provides a varactor type response nec-
essary for a high power device model. The turn on delay and the turn off delay
are adjusted via Ron and Roff.
Figure 1 DE-SERIES SPICE Model
This SPICE model may be downloaded as a text file from the DEI web site at
www.directedenergy.com/spice.htm
Net List:
*SYM=POWMOSN
.SUBCKT 201N09 10 20 30
* TERMINALS: D G S
* 200 Volt 9 Amp .4 ohm N-Channel Power MOSFET 10-30-2001
M1 1 2 3 3 DMOS L=1U W=1U
RON 5 6 1.5
DON 6 2 D1
ROF 5 7 .2
DOF 2 7 D1
D1CRS 2 8 D2
D2CRS 1 8 D2
CGS 2 3 .6N
RD 4 1 .4
DCOS 3 1 D3
RDS 1 3 5.0MEG
LS 3 30 .1N
LD 10 4 1N
LG 20 5 1N
.MODEL DMOS NMOS (LEVEL=3 VTO=3.0 KP=2.7)
.MODEL D1 D (IS=.5F CJO=1P BV=100 M=.5 VJ=.6 TT=1N)
.MODEL D2 D (IS=.5F CJO=1100P BV=500 M=.5 VJ=.6 TT=1N RS=10M)
.MODEL D3 D (IS=.5F CJO=300P BV=500 M=.3 VJ=.4 TT=400N RS=10M)
.ENDS
Doc #9200-0241 Rev 1
© 2001 Directed Energy, Inc.
