Amphenol GT Series
Reversed Bayonet Coupling Connectors
12-024-4
Amphenol
®
Table of Contents Pag e No.
Amphenol® GT Series Reversed Bayonet Coupling Connectors
General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
MS/Standard insert availability charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
Special insert availability chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
MS/Standard insert alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
MS/Standard contact arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-17
Special contact arrangements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-26
Thermocouple contact availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Thermocouple contact arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-31
GT Connector Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
GT00A wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . . . . . 33
GT00AF/00F wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . . . 34
GT00CF/00CFZ wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . . 35
GT00G wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . . . . . 36
GT00LCF/00LCFZ wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . 37
GT00R wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . . . . . 38
GT00RV wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . . . . 39
GT01A inline receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
GT01AF/01F inline receptacle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
GT01G inline receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
GT01LCF/01LCFZ inline receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
GT01R inline receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
GT01RV inline receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
GT02R/02RFS box mount receptacle for front panel mounting. . . . . . . . . . . . . . . . . . . . 46
GT020R/020RFSM box mount receptacle for front panel mounting . . . . . . . . . . . . . . . . . . 47
GT030 square flange receptacle for rear panel mounting . . . . . . . . . . . . . . . . . . . . . 48
GT030A square flange receptacle for rear panel mounting . . . . . . . . . . . . . . . . . . . . . 49
GT030AF/030F square flange receptacle for rear panel mounting . . . . . . . . . . . . . . . . . . 50
GT030G square flange receptacle for rear panel mounting . . . . . . . . . . . . . . . . . . . . . 51
GT030R square flange receptacle for rear panel mounting . . . . . . . . . . . . . . . . . . . . . 52
GT030RV square flange receptacle for rear panel mounting . . . . . . . . . . . . . . . . . . . . 53
GT06A straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
GT06AF/06F straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
GT06CF straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
GT06CFGG straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
GT06G straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
GT06LC straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
GT06LCF/06LCFZ straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
GT06PP/064PP panel plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
GT06R straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
GT06RV straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
GT065SL straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
GT07R jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
GT070 jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
GT08A 90° angle plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
GT08AF/08F 90° angle plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
GT08CFGG 90° angle plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
GT08R 90° angle plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
GT05 dummy receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
GTTB thru-bulkhead receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Sealing gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Receptacle protection caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Plug protection caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
M85049/41 (MS3057-A) cable clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
MS3420 bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
M85049/2 (MS3057-C) cable clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Rear mounting data - receptacles, sealing plugs, sealing ranges, backshell torque fo rces . . . . . . . . . . . . . 79
Solder and crimp contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 81
MS/Standard application tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
How to order, connector intermateability . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Special Application GT Connectors:
GT-PC Connectors for high voltage power applications
GT Connectors for the HMI lighting industry . . . . . . . . . . . . . . . . . . . . . . . . . 84
Sale s office list ing
Amphenol Aerospace is a Certified ISO 9001 Manufacturer
1
®
Amphenol GT Connectors
wall mount receptacle
inline receptacle
straight plug
plug with rubber covered
coupling nut
jam nut receptacle
Amphenol® GT reverse bayonet coupling connectors
with MIL-C-5015 insert patterns features:
• Quick positive coupling
• Audible, tactile and visual indication of full coupling
• Waterproof
• No lockwiring required
• High shock and vibration capabilities
• Inserts available in Neoprene and Viton* mater ials
• Low smoke/flame retardant inserts also available
• Operating temperature range:
With Neoprene inserts: –55°C to +125°C
With Viton** inserts: –50°C to +200°C
With low smoke/flame retardant inserts: –55°C to
+125°C
• Available in both crimp and solder terminations
• Contacts available in gold and silver plating
• Thermocouple contacts available
• Numerous military and commercial finishes available
• Zinc alloy plating (cadmium free) available
• Rugged construction; aluminum or stainless steel
components
• A vailab le with resilient cover coupling f or added damage
protection and increased gripping surface
• Intermateable with existing VG95234 connectors
• 2000 couplings minimum
Amphenol® GT Connectors feature a quick mating bayonet
coupling with an audible, tactile and visual full mating fea-
ture. Designed originally for use by the militar y, the heavy
duty GT connector has become widely used in commer-
cial, geophysical, aerospace, ground support and ship-
board applications.
See page 84 for Amphenol’s new est offerings of GT Series
connectors - the GT-PC for high volt age power applications
and GT connectors with color-coded receptacles and
backshells for the HMI lighting industry.
For further information on your individual application
requirements, contact:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, New York 13838-1395
Phone: 607-563-5011 Fax: 607-563-5351
NOTE:
The connector products in this brochure were formerly known as
Bendix® prod ucts. These products are now manu fac tured and sold under the
Amphenol® brand name. The name “Amphen ol” will replace the name
“Bendix” on products and literature in the future.
** For availability of Viton inserts consult Amphenol, Sidney, NY.
Viton is a registered trademark of Dupont/Dow Corning.
2
MS/Standard
insert availability
Insert
Arrangement Service
Rating Total
Contacts Contact Size
0 4 8 12 16
8S-1 A 1 1
10S-2 A 1 1
10SL-3 A 3 3
10SL-4† A 2 2
12S-3 A 2 2
12S-4 D 1 1
12-5 D 1 1
14S-2 Inst. 4 4
14S-4 D 1 1
14S-5 Inst. 5 5
14S-6 Inst. 6 6
14S-7 A 3 3
14S-9 A 2 2
14S-10 Inst. 4 4
14S-12 A 3 3
14-3 A 1 1
16S-1 A 7 7
16S-3 B 1 1
16S-4 D 2 2
16S-5 A 3 3
16S-6 A 3 3
16S-8 A 5 5
16-2 E 1 1
16-7 A 3 1 2
16-9 A 4 2 2
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
18-1 A/Inst. 10 10
18-3 D 2 2
18-4 D 4 4
18-5 D 3 2 1
18-6 D 1 1
18-7 B 1 1
18-8 A 8 1 7
18-9 Inst. 7 2 5
18-10 A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 1 3
18-14 A 2 1 1
18-15 A 4 4
18-16 C 1 1
18-17 Inst. 7 2 5
18-19 A 10 10
18-20 A 5 5
18-22 D 3 3
18-24 A/Inst. 10 10
18-29 A 5 5
18-30 A 5 5
† 10SL-4 arrangement available only with pin contacts in receptacle and socket
contac ts in plug
18-31 A 5 5
20-2 D 1 1
20-3 D 3 3
20-4 D 4 4
20-6 D 3 3
20-7 D/A 8 8
20-8 Inst. 6 2 4
20-9 D/A 8 1 7
20-11 Inst. 13 13
20-12 A 2 1 1
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-20 A 4 1 3
20-21 A 9 1 8
20-22 A 6 3 3
20-23 A 2 2
20-24 A 4 2 2
20-25 Inst. 13 13
20-27 A 14 14
20-29 A 17 17
20-30 Inst. 13 13
20-33 A 11 11
22-1 D 2 2
22-2 D 3 3
22-4 A 4 2 2
22-5 D 6 2 4
22-6 D 3 2 1
22-7 E 1 1
22-8 E 2 2
22-9 E 3 3
22-10 E 4 4
22-11 B 2 2
22-12 D 5 2 3
22-13 D/A 5 4 1
22-14 A 19 19
22-15 E/A 6 5 1
22-16 A 9 3 6
22-17 D/A 9 1 8
22-18 D/A 8 8
22-19 A 14 14
22-20 A 9 9
22-21 A 3 1 2
22-22 A 4 4
22-23 D/A 8 8
22-24 D/A 6 2 4
22-27 D/A 9 1 8
22-28 A 7 7
Insert
Arrangement Service
Rating Total
Contacts Contact Size
0 4 8 12 16
3
MS/Standard
insert availability, cont.
Insert
Arrangement Service
Rating Total
Contacts Contact Size
0 4 8 12 16
22-33 D/A 7 7
22-34 D 5 3 2
24-2 D 7 7
24-3 D 7 2 5
24-5 A 16 16
24-6 D/A 8 8
24-7 A 16 2 14
24-9 A 2 2
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-16 D/A 7 133
24-17 D 5 2 3
24-20 D 11 2 9
24-21 D 10 1 9
24-22 D 4 4
24-27 E 7 7
24-28 Inst. 24 24
28-1 D/A 9 3 6
28-2 D 14 2 12
28-3 E 3 3
28-4 E/D 9 2 7
28-5 D 5 2 1 2
28-6 D 3 3
28-7 D 2 2
28-8 E/D/A 12 2 10
28-9 D 12 6 6
28-10 D/A 7 223
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-16 A 20 20
28-17 B/D/A 15 15
28-18 C/D/A/Inst. 12 12
28-19 B/D/A 10 4 6
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
32-1 E/D 5 2 3
32-2 E 5 3 2
32-3 D 9 12 24
32-4 A/D 14 2 12
32-5 D 2 2
32-6 A 23 23216
32-7 Inst./A 35 7 28
32-8 A 30 6 24
32-9 D 14 2 12
32-10 E/B/D/A 7 2 2 3
32-12 A/D 15 5 10
32-13 D 23 5 18
32-15 D 8 2 6
32-16 A 23 2 3 2 16
32-17 D 4 4
32-22 A 54 54
32-31 A 31 31
36-1 D 22 4 18
36-3 D 6 3 3
36-4 D/A 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
36-11 A 48 48
36-12 A 48 48
36-13 E/A 17 2 15
36-14 D 16 556
36-15 D/A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-20 A 34 2 2 30
36-52 A 52 52
40-1 D 30 6 24
40-9 A 47 1 22 24
40-56 A 85 85
Insert
Arrangement Service
Rating Total
Contacts Contact Size
0 4 8 12 16
4
Insert
Arrange
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax**
04812
14-A7 A 7 7
16-59 A 4 4
20-51 A 3 3
20-57 A 7 7*
20-58 A 10 5 5
20-59 A 3 3*
20-66 A 6 5* 1
20-79 A/D 8 1 7
22-63 A 12 4 8
22-65 A/D 8 8*
22-70 A 13 8 5
22-80 A 3 3*
24-51 A 5 5
24-52 Hi Volt. 1 1
24-53 A 5 5
24-58 A 13 3 3 7
24-59 A 14 7 7
24-60 A 7 7*
24-65 A 15 11 4
24-66 D 7 7
24-67 Inst. 19 19
24-71 A 7 7*
24-75 A 7 7*
24-79 A 5 5
24-80 Inst. 23 23
24-84 A 19 1 18
24-96 Inst. 28 28
24-AJ A 25 25
28-51 A 12 12
28-59 A 17 7 10
28-66 A 16 2 14
28-72 Coax 3 3
28-74 A 16 7* 9
28-75 A 16 7* 9
28-79 A 16 7 9
28-82 D 6 2 4
28-84 A 9 9
28-AY A 9 4 5
32-25 A 25 25
32-52 D 8 2 6
32-53 Inst./E 42 5 37
32-56 A 30 6* 24
32-57 Coax 8 6 2
32-58 Coax 4 4
32-60 A 23 15 8
32-62 Coax 23 2 1 2 16 2
32-64 Inst. 54 54
32-68 A 16 12 4
Special
insert availability
**Coaxial cable data can be found on insert arrangement drawings, pages 18-26. For
further information on coaxial contacts and cable see catalog 12-130.
32-73 A 46 46
32-75 Coax 9 2 7
32-76 A 19 19
32-79 D 5 4 1
32-82 A 16 4 12
32-AF A 55 55
36-51 D 4 2 2
36-54 A 39 8 31
36-55 A 39 8* 31
36-59 A 53 3* 50
36-60 A 47 7* 40
36-64 Coax 4 4
36-65 Coax 4 4
36-71 A 53 3 50
36-73 Coax 7 7
36-74 A 44 43 1
36-75 A 48 48*
36-76 A 47 47
36-77 D 7 7
36-78 A 14 12 2
36-79 A 20 20
36-80 A 20 20*
36-83 Coax 7 7
36-85 A/D 35 35*
36-AF A 48 48
40-5 A 5 5
40-10 A 29 4 9 16
40-35 D 35 35
40-53 A 60 60
40-57 E 4 4
40-61 A 59 1 3 55
40-62 A 60 60
40-63 A 61 61*
40-64 Coax 36 3 20 13
40-66 Coax 4 4
40-67 A 11 1 10
40-68 A 21 21
40-70 A 61 61
40-72 A 11 1 10
40-73 A 61 61
40-74 A 6 1 4 1
40-75 E 5 4 1
40-80 A 11 10 1
40-81 A 62 62*
40-82 A 62 62
40-85 A 60 60*
40-86 E 4 4
40-87 D 7 7
40-AG A 38 38
Insert
Arrange
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax**
04812
* Crimp contacts accommodate wire the same size as the contact as well as wire of the
next smaller, even size. Arrangements identified with an asterisk (*) are exceptions.
See insert arrangement drawings on pages 18-26 fo r application wire size.
5
To avoid cross-plugging problems in applications requir-
ing th e use of m ore th an one conne ctor of the s ame s ize
and arrangement, alternate rotations are available as
indicated in the accompanying charts.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counter-clockwise the same number of degrees in
respect to the normal shell key.
Position W Position X Position Y Positi on Z
View looking into front face of pin insert or rear of socket insert.
The following insert arrangements have the same alter-
nate insert rotations for W, X, Y and Z, which are:
Degrees
WX YZ
80 110 250 280
16-7 20-16 22-18 24-4 24-28 28-17 32-12
18-5 20-20 22-19 24-5 28-1 28-19 32-13
18-9 20-22 22-21 24-6 28-4 28-20 32-22
18-13 22-3 22-24 24-7 28-8 28-21 32-AF
18-14 22-6 22-25 24-12 28-9 32-1 36-1
20-7 22-12 22-29 24-14 28-10 32-3 36-7
20-8 22-14 22-33 24-16 28-11 32-4 36-8
20-9 22-15 22-34 24-17 28-14 32-6 36-13
20-12 22-16 24-1 24-20 28-15 32-9
20-14 22-17 24-3 24-21 28-16 32-10
MS/Standard
insert
altern ate positioning
Insert
Arrangement Degrees
WXYZ
10SL-463–––
12S-3 70 145 215 290
14S-2 – 120 240 –
14S-5 – 110 – –
14S-7 90 180 270 –
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270 –
16-11 35 110 250 325
16-13 35 110 250 325
16S-1 80 – – 280
16S-4 35 110 250 325
16S-5 70 145 215 290
16S-6 90 180 270 –
16S-8 – 170 265 –
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 – – 290
18-10 – 120 240 –
18-11 – 170 265 –
18-12 80 – – 280
18-15 – 120 240 –
18-20 90 180 270 –
18-22 70 145 215 290
18-29 90 180 270 –
20-3 70 145 215 290
20-4 45 110 250 –
20-5 35 110 250 325
20-6 70 145 215 290
20-15 80 – – 280
20-17 90 180 270 –
20-18 35 110 250 325
20-19 90 180 270 –
20-21 35 110 250 325
20-23 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 – – 280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 – 110 250 –
22-23 35 – 250 –
22-27 80 – 250 280
22-28 80 – – 280
24-2 80 – – 280
24-9 35 110 250 325
24-10 80 – – 280
24-11 35 110 250 325
24-22 45 110 250 –
24-27 80 – – 280
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
Insert
Arrangement Degrees
WXYZ
* Additional rotations available; consult Amphenol
for information.
28-6 70 145 215 290
28-7 35 110 250 325
28-12 90 180 270 –
28-18 70 145 215 290
28-22 70 145 215 290
28-AY 45 110 250 –
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250 –
32-25 60 120 – –
32-64* 80 100 110 250
32-68 30–––
32-82 30–––
36-3 70 145 215 290
36-4 70 145 215 290
36-5 – 120 240 –
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270 –
36-15 60 125 245 305
36-AF 65–––
40-1 65 130 235 300
40-5 33 – – 270
40-9 65 125 225 310
40-10 65 125 225 310
40-35 70 130 230 290
40-AG 37 74 285 322
Insert
Arrangement Degrees
WXYZ
6
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 8S-1 10S-2 10SL-3 10SL-4 12S-3 12S-4 12-5
Service Rating AAAAADD
Number of Contacts 1132211
Contact Size 16 16 16 16 16 16 12
Insert Arrangement 14S-2 14S-4 14S-5 14S-6 14S-7 14S-9
Service Rating Inst. D Inst. Inst. A A
Number of Contacts 415632
Contact Size 16 16 16 16 16 16
Insert Arrangement 14S-10 14S-12 14-3 16S-1 16S-3 16S-4
Service Rating Inst. A A A B D
Number of Contacts 431712
Contact Size 16 16 8 16 16 16
Insert Arrangement 16S-5 16S-6 16S-8 16-2 16-7 16-9
Service Rating AA A E AA
Number of Contacts 3 3 5 1 1 2 2 2
Contact Size 16 16 16 12 8 16 12 16
CONTACT LEGEND 16 12 8 4 0
Front of
Socket Insert Front of
Socket Insert
100° Rotation
of 14S-2 100° Rotation
of 14S-7
7
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 16-10 16-11 16-12 16-13 18-1 18-3
Service Rating AAAAB, C, F, G = A; Bal. = Inst.D
Number of Contacts 3 2 1 2* 10 2
Contact Size 12 12 4 12 1 6 12
Insert Arrangement 18-4 18-5 18-6 18-7 18-8 18-9
Service Rating D D D B A Inst.
Number of Contacts 4 21 1 1 17 25
Contact Size 16 12 16 4 8 12 16 12 16
Insert Arrangement 18-10 18-11 18-12 18-13 18-14 18-15
Service Rating A A A A A A
Number of Contacts 4 5 6 1 3 1 1 4**
Contact Size 12 12 16 8 12 4 16 12
Insert Arrangement 18-16 18-17 18-19 18-20 18-22 18-24
Serv ic e Ra tin g C Ins t . A A D B , C , F, G = A; Ba l. = Ins t .
Number of Contacts 1 2 5 10 5 3 10
Contact Size 12 12 16 16 16 16 16
CONTACT LEGEND 16 12 8 4 0
* A = Iron; B = Constantan
** A, C = Iron; B, D = Constantan
100° Rotation
of 18-9 250° Rotation
of 18-1
8
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 18-29 18-30 18-31 20-2 20-3 20-4
Service Rating A A A D D D
Number of Contacts 5 5 5 1 3 4
Contact Size 16 16 16 0 12 12
Insert Arrangement 20-6 20-7 20-8 20-9 20-11 20-12
Service Rating D A, B, H, G = D; C, D, E, F = A Inst. H = D; Bal. = A Inst. A
Number of Contacts 3 8 2 4 1 7 13 1 1
Contact Size 16 16 8 16 12 16 16 4 16
Insert Arrangement 20-14 20-15 20-16 20-17 20-18 20-19
Service Rating A A A A A A
Number of Contacts 23 7 27 51 36 3
Contact Size 8 12 12 1216 1216 1216 8
CONTACT LEGEND 16 12 8 4 0
110° Rotation
of 18-20 260° Rotation
of 18-20
9
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 20-20 20-21 20-22 20-23 20-24 20-25
Service Rating AAAA AInst.
Number of Contacts 1 3 1 8 3 3 2 2 2 13
Contact Size 4 12 12 16 8 16 8 8 16 16
Insert Arrangement 20-27 20-29 20-30 20-33 22-1 22-2
Service Rating A A Inst. A D D
Number of Contacts 14 17 13 11 2 3
Contact Size 16 16 16 16 8 8
Insert Arrangement 22-4 22-5 22-6 22-7 22-8
Service Rating A D D E E
Number of Contacts 2 2 2 4 2 1 1 2
Contact Size 8 12 12 16 8 16 0 12
CONTACT LEGEND 16 12 8 4 0
250° Rotation
of 20-11
100° Rotation
of 20-11
10
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 22-9 22-10 22-11 22-12 22-13
Service Rating E E B D E = D; A, B, C, D = A
Number of Contacts 3 4 2 2 3 4 1
Contact Size 12 16 16 8 16 12 16
Insert Arrangement 22-14 22-15 22-16 22-17 22-18
Service Rating A D = E; A, B, C, E, F = A A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A
Number of Contacts 19 5 1 3 6 1 8 8
Contact Size 16 12 16 12 16 12 16 16
Insert Arrangement 22-19 22-20 22-21 22-22 22-23
Service Rating A A A A H = D; Bal. = A
Number of Contacts 14 9 1 2 4 8
Contact Size 16 16 0 16 8 12
CONTACT LEGEND 16 12 8 4 0
11
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 22-24 22-27 22-28 22-33 22-34
Service Rating C, D, E = D; A, B, F = A J = D; Bal. = A A A, B, C, D = D; E, F, G = A D
Number of Contacts 2 4 1 8 7 7 3 2
Contact Size 12 16 8 16 12 16 12 16
Insert Arrangement 24-2 24-3 24-5 24-6 24-7
Service Rating D D A A, G, H = D; Bal. = A A
Number of Contacts 7 2 5 16 8 2 14
Contact Size 12 12 16 16 12 12 16
Insert Arrangement 24-9 24-10 24-11 24-12 24-16
Service Rating A A A A A, B, F, G = D; C, D, E = A
Number of Contacts 2 7 3 6 2 3 1 3 3
Contact Size 4 8 8 12 4 12 8 12 16
CONTACT LEGEND 16 12 8 4 0
12
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 24-17 24-20 24-21 24-22 24-27
Service Rating DDDD E
Number of Contacts 2 3 2 9 1 9 4 7
Contact Size 12 16 12 16 8 16 8 16
Insert Arrangement 24-28 28-1 28-2 28-3
Service Rating Inst. A, J, E = D; Bal. = A D E
Number of Contacts 24 3 6 2 12 3
Contact Size 16 8 12 12 16 8
Insert Arrangement 28-4 28-5 28-6 28-7
Service Rating G, P, S = E; Bal. = D D D D
Number of Contacts 2 7 2 1 2 3 2
Contact Size 12 16 4 12 16 4 4
CONTACT LEGEND 16 12 8 4 0
13
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 28-8 28-9 28-10 28-11
Service Rating L, M = E; B = D; Bal. = A D G = D; Bal. = A A
Number of Contacts 2 10 6 6 2 2 3 4 18
Contact Size 12 16 12 16 4 8 12 12 16
Insert Arrangement 28-12 28-13 28-15 28-16
Service Rating A A A A
Number of Contacts 26 26 35 20
Contact Size 16 16 16 16
Insert Arrangement 28-17 28-18 28-19
Service Rating R = B; M, N, P = D; A to L = A M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst. H, M = B; A, B = D; Bal. = A
Number of Contacts 15 12 4 6
Contact Size 16 16 12 16
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 28-12
14
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 28-20 28-21 28-22 32-1
Service Rating A A D A = E; B, C, D, E = D
Number of Contacts 10 4 37 3 3 2 3
Contact Size 12 16 16 4 16 0 12
Insert Arrangement 32-2 32-3 32-4 32-5
Service Rating E D F, J, K, N = A; Bal. = D D
Number of Contacts 3 2 1 2 2 4 2 12 2
Contact Size 416 041216 1216 0
Insert Arrangement 32-6 32-7 32-8 32-9
Service Rating A A, B, h, j = Inst.; Bal. = A A D
Number of Contacts 2 3 2 16 7 28 6 24 2 12
Contact Size 4 8 12 16 12 16 12 16 4 16
CONTACT LEGEND 16 12 8 4 0
15
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 32-10 32-12 32-13 32-15
Service Rating A, F = E; G = B; B, E = D; C, D = A C, D, E, F, G = A; Bal. = D D D
Number of Contacts 2 2 3 5 10 5 18 2 6
Contact Size 4 8 16 12 16 12 16 0 12
Insert Arrangement 32-16 32-17 32-22 32-31
Service Rating A D A A
Number of Contacts 2 3 2 16 4 54 31
Contact Size 4 8 12 16 4 16 16
Insert Arrangement 36-1 36-3 36-4 36-5
Service Rating D D A = D; B, C = A A
Number of Contacts 4 18 3 3 3 4
Contact Size 12 16 0 12 0 0
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 32-6
16
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 36-6 36-7 36-8 36-9
Service Rating A A A A
Number of Contacts 2 4 7 40 1 46 1 2 14 14
Contact Size 0 4 12 16 12 16 4 8 12 16
Insert Arrangement 36-10 36-11 36-12
Service Rating A A A
Number of Contacts 48 48 48
Contact Size 16 16 16
Insert Arrangement 36-13 36-14 36-15
Service Rating N, P, Q = E; Bal. = A D M = D; Bal. = A
Number of Contacts 2 15 5 5 6 35
Contact Size 12 16 8 12 16 16
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 36-10 110° Rotation
of 36-10
17
front face of pin insert or rear face of socket insert illustrated
MS/Standard
contact arrangements
Insert Arrangement 36-16 36-17 36-18
Service Rating A A A
Number of Contacts 7 40 7 40 1 2 14 14
Contact Size 12 16 12 16 4 8 12 16
Insert Arrangement 36-20 36-52 40-1
Service Rating A A D
Number of Contacts 2 2 30 52 6 24
Contact Size 8 12 16 16 12 16
Insert Arrangement 40-9 40-56
Service Rating A A
Number of Contacts 1 22 24 85
Contact Size 8 12 16 16
CONTACT LEGEND 16 12 8 4 0
110° Rotation
of 36-7 100° Rotation
of 36-9
100° Rotation
of 36-7
18
Special
contact arrangements
Requirements for more complex circuits prompted
Amphenol to provide inserts not covered b y the MS dra w-
ings. Illustrated here and on the following pages are
inse rt layo uts whic h have from one contact ( hig h tens io n)
to the 62 contact insert in shell size 40.
Many of these special inserts are also available in alter-
nate keyway arrangements. Please contact Amphenol,
Sidney, NY for additional information on special circuit
application requirements.
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 14-A7 16-59 20-51 20-57 20-58 20-59
Service Rating A A A A A A
Number of Contacts 7 4 3* 7* 5 5 3*
Contac t Siz e 16 12 8 12 for #14 or 16 wire 12 16 8 fo r #10 or 12 wire
Insert Arrangement 20-66 20-79 22-63 22-65 22-70
Service Rating A H = D; Bal. = A A H = D; Bal. = A A
Number of Contacts 1 5 7* 1* 4 8 8* 8 5
Contact Size 16 12 for #10 wire 16 12 for #16 wire 12 16 12 for #14 or 16 wire 12 16
Insert Arrangement 22-80 24-51 24-52 24-53 24-58
Service Rating A A Hi-Volt A A
Number of Contacts 3* 5* 1 5* 3 3 7
Contact Size 8 for #10 or 12 wi re B, E for AN #10 or 12 wir e 12 8 8 12 16
A, C, D for AN #8 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
19
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 24-59 24-60 24-65 24-66 24-67
Service Rating A A A D Inst.
Number of Contacts 7 7 7* 11 4 7 19
Contact Siz e 12 16 8 for #10 or 12 wire 12 16 12 12
Insert Arrangement 24-71 24-75 24-79 24-80 24-84
Service Rating A A A Inst. A
Number of Contacts 2* 5* 5 2 5 23 1 18
Contact Size 8 8 for #10 or 12 wire 8 8 for #16 wire 8 16 12 12 (Coax) RG-188/U
or RG-174/U
Insert Arrangement 24-96 24-AJ 28-51 28-59 28-66
Service Rating Inst. A A A A
Number of Contacts 28 25 12 7 10 2 14
Contact Size 16 16 12 12 16 8 12
* Solderless CONTACT LEGEND 16 12 8 4 0
20
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 28-72 28-74 28-75 28-79
Service Rating – A A A
Number of Contacts 3 9* 4* 3* 9* 7* 7 9
Contact Size 4 (Coax) RG-59A/U 16 8 8 for #10 wire 16 8 for #10 wire 8 16
or RG-6 2 A/U (S, T, R)
Insert Arrangement 28-82 28-84 28-AY 32-25
Service Rating D A A A
Number of Contacts 2 4 9 4 5 25
Contact Size 812 8 416 12
Insert Arrangement 32-52 32-53 32-56 32-57
Service Rating D t, u = E; Bal. = Inst. A **
Number of Contacts 6 2 5 37 24 6 6 2
Contact Size 12 0 12 16 16 12 for #10 wire 12 0 (Coax) RG-71/U
* Solderless CONTACT LEGEND 16 12 8 4 0
** Consult Amphenol, Sidney, NY for service rating of power contacts.
90° CW Rotation
of 32-15
21
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 32-58 32-60 32-62
Service Rating – A **
Number of Contacts 4 15 8 2 1 2 16 2
Contact Size 4 (Coax) RG-161/U 16 8 (Coax) RG-124/U 4 8 12 16 8 (Coax) RG-124/U
or RG-179/U
Insert Arrangement 36-64 32-68 32-73 32-75
Service Rati n g Inst. A A 8, 9 = D
Number of Contacts 54 12 4 46 2 7
Contact Size 16 16 4 (Coax) RG-58C/U 16 12 8 (Coax) RG-180B/U
Insert Arrangement 32-76 32-79 38-82 32-AF
Service Rating A D A A
Number of Contacts 19 4 1 4 12 55
Contact Size 12 4 8 4 16 16
** Consult Amphenol, Sidney, NY for service rating of power contacts. CONTACT LEGEND 16 12 8 4 0
22
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 36-51 36-54 36-55
Service Rating D A A
Number of Contacts 2 2 8 31 31 8
Contact Size 0 4 8 16 16 8 for #6 wire
Insert Arrangement 36-59 36-60 36-64
Service Rating A ** –
Number of Contacts 50 3 40 7 4
Contact Size 16 12 for #10 wire 16 12 for #10 wire 0 (Coax) RG-11/U,
RG-12/U or RG-13/U
Insert Arrangement 36-65 36-71 36-73
Service Rating – A –
Number of Contacts 4 3 50 7
Contact Size 0 (Coax) RG-59/ U, RG-62/U 12 16 4 (Coax) RG-62B/U
or RG-71/U
** Consult Amphenol, Sidney, NY for service rating of power contacts. CONTACT LEGEND 16 12 8 4 0
23
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 36-74 36-75 36-76
Service Rating A A A
Number of Contacts 43 1 48 47
Contact Size 16 8 (Coax) RG-187/U 16 for #14 wire 16
Insert Arrangement 36-77 36-78 36-79
Service Rating D A A
Number of Contacts 7 2 12 20
Contact Size 4 16 8 12
Insert Arrangement 36-80 36-83 36-85
Service Rating A – M = D; Bal. = A
Number of Contacts 20 7 35
Contact Size 12 for #10 wire 4 (Coax) RG-58/U 16 for #12 wire
CONTACT LEGEND 16 12 8 4 0
24
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 36-AF 40-5 40-10
Service Rating A A A
Number of Contacts 48 5 4 9 16
Contact Size 16 0 4 8 16
Insert Arrangement 40-35 40-53 40-57
Service Rating D A E
Number of Contacts 35 60 4
Contact Size 12 16 0
Insert Arrangement 40-61 40-62 40-63
Service Rating A A A
Number of Contacts 1 3 55 60 61
Contact Size 8 12 16 16 16 for #14 wire
CONTACT LEGEND 16 12 8 4 0
25
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 40-64 40-66 40-67
Service Rating – – A
Number of Contacts 3 20 13 4 1 10
Contact Size 12 16 8 (Coax) RG-124/U 0 (Coax) RG-63 B/U 16 4 (Coax) RG-59/U
Insert Arrangement 40-68 40-70 40-72
Service Rating A A A
Number of Contacts 21 61 1 10
Contact Size 8 16 16 4 (Coax) RG-9B/U
Insert Arrangement 40-73 40-74 40-75
Service Rating A A E
Number of Contacts 61 1 1 4 1 4
Contact Size 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U 1 2 0
or RG-214/U
CONTACT LEGEND 16 12 8 4 0
26
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 40-80 40-81 40-82
Service Rating A A A
Number of Contacts 1 10 62 62
Contact Size 16 4 16 for #14 wire 16
Insert Arrangement 40-85 40-86 40-87
Service Rating A – D
Number of Contacts 60 4 7
Contact Size 16 for #14 wire 0 (Co ax) RG-115A/U 4
Insert Arrangement 40-AG
Service Rating A
Number of Contacts 38
Contact Size 12
CONTACT LEGEND 16 12 8 4 0
27
A compl ete line of cy lindr ical con nectors conta ining ther -
mocouple insert arrangements is available. The contact
layo ut for a pa r ticula r arrangemen t will be found in either
the MS/Standard contact arrangement section, pages
26-37, or the Special contact arrangement section, pages
38-48. All thermocouple contact layouts may contain
either iron, alumel, chromel, constantan, standard (cop-
per) or brass (dummy) contacts. See the thermocouple
tabulations on the following page s.
The following abbreviations are used in the contact mate-
rial column in the charts that follow. Also, thermocouple
contacts are color coded a s s hown. (This iden tificati on is
made by means of small dots of stain on the solder well
end of the contact).
Abbreviation Material Color Code
Ir. Iron Black
Con. Constantan Yellow
Cu. Copper Alloy N/A
Ch. Chromel White
Al. Alumel Green
Dummy Brass N/A
WIRE WELL DATA
Contact
Size
Well Insid e D ia .
+.004
–.002
Well Depth
+.031
–.000
Solde r Well
Barrel
Outside Dia.
12 .125 .250 .166 ±.003
16 .094 .188 .125
RECOMMENDED WIRE
I Chromel - Alumel Use wire in accordance
with MIL-W-5848
II Iron - Constantan Use wire in accordance
with MIL-W-5845
Thermocouple
contact availability
+.002
–.004
28
Shell
Size
and Arrg.
Similar
to
MS Arrg. Total
Contacts
Contact
Size Pin
Insert
Rotation
C W Contact Material
12 16
10SL-51 10SL-4 2 2 45° A = Ir.; B = Con.
10SL-52 10SL-4 2 2 45° A = Cu.; B = Con.
10SL-53 10SL-4 2 2 45° A = Al.; B = Ch.
10SL-54 10SL-3 3 3 None A = Ir.; B = Con.; C = Cu.
10SL-55 10SL-3 3 3 None A = Al.; B = Ch.; C = Cu.
10SL-56 10SL-4 2 2 None A = Al.; B = Ch.
10SL-57 10SL-4 2 2 None A = Ch.; B = Con.
10SL-58 10SL-3 3 3 None A = Ch.; B = Al.; C = Cu.
10SL-59 10SL-4 2 2 None A = Ch.; B = Al.
10SL-60 10SL-4 2 2 None A = Ir.; B = Con.
10SL-61 10SL-4 2 2 None A = Cu.; B = Con.
10SL-62 10SL-3 3 3 None A = Cu.; B = Al.; C = Ir.
10SL-63 10SL-3 3 3 None A, C = Con.; B = Ch.
10SL-64 10SL-3 3 3 None A, C = Ch.; B = Al.
12S-51 12S-3 2 2 315° A = Ch.; B = Al.
12S-54 12S-3 2 2 315° A = Ir. ; B = Con.
12S-55 12S-3 2 2 45° A = Cu.; B = Con.
12S-56 12S-3 2 2 None A = Al.; B = Ch.
12S-57 12S-3 2 2 60° A = Ch.; B = Al.
12S-58 12S-3 2 2 120° A = Ir. ; B = Con.
12S-59 12S-3 2 2 None A = Ir.; B = Con.
12S-60 12S-3 2 2 None A = Cu.; B = Con.
12S-61 12S-3 2 2 None A = Ch.; B = Con.
12S-62 12S-3 2 2 None A = Ch.; B = Al.
14S-51 14S-9 2 2 90° A = Al.; B = Ch.
14S-52 14S-2 4 4 45° A, B = Cu.; C = Al.; D = Ch.
14S-53 14S-9 2 2 90° A = Ir.; B = Con.
14S-54 14S-6 6 6 45° A, C, E = Ir.; B, D, F = Con.
14S-55 14S-2 4 4 45° A, C = Ir.; B, D = Con.
14S-56 14S-2 4 4 45° A = Ir. ; B = Con.; C, D = Cu.
14S-57 14S-2 4 4 45° A, C = Al.; B, D = Ch.
14S-58 14S-7 3 3 45° A = Al.; B = Ch.; C = Cu.
14S-59 14S-9 2 2 90° A = Cu.; B = Con.
14S-60 14S-9 2 2 None A = Al.; B = Ch.
14S-61 14S-6 6 6 45° A = Al .; B = Ch. ; C = Ir.; D = Con.; E, F = Cu.
14S-63 14S-6 6 6 None A, C = Al.; B, D = Ch.; E = Ir.; F = Con.
14S-64 14S-2 4 4 None A, C = Con.; B, D = Cu.
14S-65 14S-6 6 6 None A, C., E = Cu.; B, D, F = Con.
14S-67 14S-6 6 6 None A = Al.; B = Ch.; Balance = Cu.
14S-68 14S-2 4 4 45° A = Ch.; B = Con.; C, D = Cu.
14S-69 14S-7 3 3 None A = Con.; B = Ch.; C = Cu.
14S-70 14S-2 4 4 None A, D = Ch.; B, C = Al.
14S-71 14S-2 4 4 None A, B, D = Cu.; C = Con.
14S-72 14S-9 2 2 None A = Con.; B = Cu.
14S-73 14S-2 4 4 None A, B = Cu.; C = Al.; D = Ch.
Thermocouple
contact arrangements
29
Thermocouple
contact arrangements
Shell
Size
and Arrg.
Similar
to
MS Arrg. Total
Contacts
Contact
Size Pin
Insert
Rotation
C W Contact Material
12 16
14S-74 14S-2 4 4 None A, B = Ch.; C, D = Al.
14S-75 14S-2 4 4 None A, B = Cu.; C, D = Con.
14S-76 14S-2 4 4 None A, C = Al.; B, D = Ch.
14S-77 14S-2 4 4 None A, D = Al.; B, C = Ch.
14S-78 14S-9 2 2 None A = Ch.; B = Al.
16S-52 16S-4 2 2 None A = Ch.; B = Al.
16S-54 16S-1 7 7 None A = Al.; B = Ch.; Balance = Cu.
16S-55 16S-1 7 7 None A = Con.; Balance = Cu.
16-52 16-11 2 2 90° A = Al.; B = Ch.
16-53 16-9 4 2 2 70° A = Al.; C = Ch.; B, D = Cu.
16-55 16-10 3 3 45° A = Al.; B = Ch.; C = Cu.
16-56 16-13 2 2 90° A = Con.; B = Cu.
16-57 16-10 3 3 None A = Al.; B = Cu.; C = Ch.
16-58 16-10 3 3 None A = Con.; B, C = Cu.
16-60 16-13 2 2 None A = Al.; B = Ch.
16-62 16-11 2 2 None A = Con.; B = Cu.
18-51 18-12 6 6 None A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy
18-52 18-11 5 5 None A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy
18-53 18-12 6 6 None A, D = Ir.; B, E = Con.; C, F = Dummy
18-54 18-15 4 4 None A, C = Al.; B, D = Ch.
18-56 18-1 10 10 45° A, C , E, G, I = Ir.; B, D, F, H, J = Con.
18-57 18-12 6 6 45° A , C, E = Al.; B, D, F = Ch.
18-59 18-12 6 6 45° A, C = Ir.; B, E, F = Con.; D = Cu.
18-60 18-11 5 5 45° A, D = Al.; B, C, = Ch.; E = Cu.
18-61 18-12 6 6 None A, C = Ir.; B, D = Con.; E = Ch.; F = Al.
18-62 18-12 6 6 None A, B, C = Ir .; D, E, F = Con.
18-63 18-15 4 4 None A, C = Con.; B, D = Cu.
18-65 18-12 6 6 None A = Ir.; B = Con.; Balance = Cu.
18-66 18-1 10 10 None A, C, E, G, I = Cu.; B, D, F, H, J = Con.
18-67 18-12 6 6 None A, C, E = Cu.; B, D, F = Con.
18-68 18-11 5 5 None A, D = Al.; B, C = Ch.; E = Cu.
18-69 18-1 10 10 None A = Al.; B = Ch.; Balance = Cu.
18-70 18-11 5 5 None A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu.
18-71 18-15 4 4 None A = Con.; Balance = Cu.
18-72 18-15 4 4 None D = Con.; Balance = Cu.
18-73 18-9 7 2 5 None A = Al.; D = Ch.; Balance = Cu.
18-74 18-12 6 6 None A = Ch.; B = Al.; D = Ir.; E = Cu.; C, F = Con.
20-52 20-4 4 4 315° A = Ir.; B = Con.; C = Ch.; D = Al.
20-56 20-7 8 8 45° A, B, G, H = Ir.; C , D, E, F = Con.
20-60 20-7 8 8 45° D = Ch.; E = Al.; Balance = Cu.
20-61 20-29 17 17 45° A, B, M = Cu.; Balance = Con.
20-62 20-15 7 7 80° A, C, E = Al.; B, D, F = Ch.; G = Cu.
20-64 20-27 14 14 None A = Al.; C = Ch.; Balance = Cu.
30
Thermocouple
contact arrangements
Shell
Size
and Arrg.
Similar
to
MS Arrg. Total
Contacts
Contact
Size Pin
Insert
Rotation
C W Contact Material
12 16
20-65 20-27 14 14 None A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con.
20-67 20-16 9 2 7 None H = Al.; I = Ch.; Balance = Cu.
20-68 20-7 8 8 None A, B, G, H = Con.; C, D, E, F = Cu.
20-69 20-27 14 14 None A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con.
20-70 20-29 17 17 None A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con.
20-71 20-29 17 17 None S = Al.; R = Ch.; Balance = Cu.
20-74 20-29 17 17 None A, C, E, G, J , L, N, R = Ir.; B , D, F, H, K, M, P, S = Con.; T = Cu.
20-75 20-15 7 7 None G = Al.; Balance = Ch.
20-77 20-16 9 2 7 None A = Con.; Balance = Std.
20-80 20-27 14 14 None A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con.
20-81 20-27 14 14 None A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al.
20-82 20-29 17 17 None A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu.
22-57 22-14 19 19 45° A, C, E, G, J, L, N, R = Ir . ; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu.
22-60 22-14 19 19 4 5° U = Al.; N = Ch.; Balance = Cu.
22-62 22-23 8 8 60° A, B, F, G = Al.; C, D, E, H = Ch.
22-68 22-19 14 14 4 5° A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con.
22-69 22-19 14 14 4 5° A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con.
22-71 22-14 19 19 None V = Al.; U = Ch.; Balance = Cu.
22-72 22-5 6 2 4 None B = Al.; E = Ch.; Balance = Cu.
22-73 22-5 6 2 4 None E = Al.; B = Ch.; Balance = Cu.
22-74 22-23 8 8 None A, C, E, G = Ir. ; B, D, F, H = Con.
22-75 22-23 8 8 None A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con.
22-76 21 21 None W = Con.; Balance = Cu.
22-77 22-19 14 14 None B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con.
22-78 22-14 19 19 None A, C, E, G, H, K, M, P, R, T = Con.; Balance = Cu.
22-79 22-10 4 4 None A, C, = Con.; B, D = Cu.
24-56 24-20 11 2 9 45° E = Al.; F = Ch.; Balance = Cu.
24-57 24-28 24 24 45° A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Balance = Al.
24-62 24-28 24 24 None A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Balance = Cu.
24-63 24-28 24 24 None A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con.
24-64 24-5 16 16 None A, B, C, D, E, F, G, H = Ir.; J , K, L, M, N, P, R, S = Con.
24-68 24-28 24 24 None D = Con.; Balance = Cu.
24-81 24-7 16 2 14 None A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J , L, O = Con.
28-53 28-11 22 4 18 45° J, L = Al.; K, M = Ch.; Balance = Cu.
28-58 28-20 14 10 4 45° A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu.
28-61 28-21 37 37 4 5° A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Balance = Con.
28-63 28-20 14 10 4 45° A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Balance = Cu.
28-64 28-15 35 35 None A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.;
Balance = Cu.
28-65 28-12 26 26 None A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W = Con.;
Y, a = Ch.; b, d = Cu.
28-67 28-16 20 20 None U = Con.; Balance = Cu.
28-68 28-15 35 35 45° T = Al.; U = Ch.; Balance = Cu.
28-69 28-11 22 4 18 None G = Al.; R = Ch.; Balance = Cu.
31
Thermocouple
contact arrangements
* Ampheno l arrang em ent
Shell Size
and Arrg. Similar to
MS Arrg. Total
Contacts
Contact
Size Pin Insert
Rotation
C W Contact Material
12 16
28-70 2 8-11 22 4 18 None A = Al.; B = Ch.; Balance = Cu.
28-77 2 8-11 22 4 18 None J = Con.; Balance = Cu.
28-81 28-21 37 37 None A, D, S, Z, n, s = Ir.; B, J, K, f, g, r = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k =
Ch.; Balance = Cu.
32-51 3 2-8 30 6 24 90° M = Ch.; N = Al.; Balance = Cu.
32-55 3 2-8 30 6 24 125° M, N = Ch.; O, P = Al.; Balance = Cu.
36-53 3 6-7 47 7 40 45° u, v, w = Al.; x, y, z = Ch.; Balance = Cu.
36-56 36-10 48 48 None A, C, E, G, L, J, H, P, R, T, V, X Z, b , d, f, h, k, q, n, m, u, w , y = Con.;
Balance = Cu.
36-57 36-8 47 1 46 None W = Al.; f = Ch. Balance = Cu.
36-58 36-15 35 35 None H = Al.; G = Ch.; Balance = Cu.
36-61 36-15 35 35 None A, C , E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Balance = Cu.
36-62 3 6-10 48 48 None A, C, E, = Al.; B, D, F = Ch.; Balance = Cu.
36-82 3 6-52* 52 52 None v, g = Ir.; p, y, c = Con. x = Ch.; Balance = Cu.
40-58 40-56* 85 85 None A, C , E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r , t, v, x, z, AB, AD, AF, AJ, AL,
AN, AP, AS, AU, AW, AY, BA, BC, BE, BH , BK, BM, BP, BS, BU = Ir.; Balanc e =
Con.
40-59 4 0-56* 85 85 None B = Ch.; C = Con.; Balance = Cu.
40-77 40-53* 60 60 None 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Balance = Cu.
40-78 40-53* 60 60 None 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37 = Con.; 25, 39, 40, 41 = Al.;
43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Balance = Cu.
32
GT
Connector
Classes
33
GT00A
wall mount receptacle for front panel mounting
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .559 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .559 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .559 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .748 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .748 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .748 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .748 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .811 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .811 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .874 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .874 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .874 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 14.2 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 14.2 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 14.2 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 19.0 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 19.0 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 19.0 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 19.0 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 20.6 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 20.6 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 22.2 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 22.2 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 22.2 65.5 4.0 55.5 69.9 4.3
• Fou r through mount ing holes or optional threade d holes
• Includes ba ckshel l for access or y attachmen t
• W ithou t grommet an d cable clamp
• Non- environment proof
34
GT00AF/00F
wall mount receptacle for front panel mounting
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Max. KK
Max. LL
Max.
10SL 2.362 .559 .717 .110 .717 1.000 .126 .220 .894 4.720
14S 2.440 .559 .969 .126 .906 1.181 .126 .312 1.083 4.720
16S 2.756 .559 1.079 .126 .969 1.280 .126 .437 1.181 4.720
16 2.756 .748 1.079 .126 .969 1.280 .126 .437 1.181 4.921
18 3.031 .748 1.213 .157 1.063 1.378 .126 .562 1.300 4.921
20 3.031 .748 1.346 .157 1.157 1.496 .126 .625 1.476 4.921
22 3.031 .748 1.472 .157 1.252 1.614 .126 .625 1.476 4.921
24 3.346 .811 1.610 .157 1.374 1.752 .146 .750 1.705 4.921
28 3.346 .811 1.839 .157 1.563 2.000 .146 .750 1.705 4.921
32 3.346 .874 2.102 .157 1.752 2.244 .169 .937 2.035 4.921
36 4.133 .874 2.346 .157 1.937 2.500 .169 1.250 2.283 5.315
40 5.118 .874 2.579 .157 2.185 2.752 .169 1.375 2.579 5.709
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Max. KK
Max. LL
Max.
10SL 60 14.2 18.2 2.8 18.2 25.4 3.2 5.58 22.7 120
14S 62 14.2 24.6 3.2 23.0 30.0 3.2 7.92 27.5 120
16S 70 14.2 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120
16 70 19.0 27.4 3.2 24.6 32.5 3.2 11.09 30.0 125
18 77 19.0 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125
20 77 19.0 34.2 4.0 29.4 38.0 3.2 15.87 37.5 125
22 77 19.0 37.4 4.0 31.8 41.0 3.2 15.87 37.5 125
24 85 20.6 40.9 4.0 34.9 44.5 3.7 19.05 43.3 125
28 85 20.6 46.7 4.0 39.7 50.8 3.7 19.05 43.3 125
32 85 22.2 53.4 4.0 44.5 57.0 4.3 23.79 51.7 125
36 105 22.2 59.6 4.0 49.2 63.5 4.3 31.75 58.0 135
40 130 22.2 65.5 4.0 55.5 69.9 4.3 34.92 65.5 145
GT00AF
• Without grommet
• Cable clamp included
• Non- environment proof
• Fou r through mount ing holes or optional threade d holes
GT00F
• With wire sea ling grommet and ca ble clamp
• For use with individual wires
• Environment proof
• Fou r through mount ing holes or op tiona l thr ead ed holes
35
GT00CF/00CFZ
wall mount receptacle for front panel mounting
GT00CF
• Withou t individu al wire se aling grommet
• Environment proof
• Fou r through mount ing holes or optional threade d holes
• Includes clamp to grip and seal jacketed cable
GT00CFZ
• Sam e as GT00C F except: individual wire seali ng gromme t
included for added moisture protection
• Environment proof
• Fou r through mount ing holes or op tiona l thr ead ed holes
• Includes clamp to grip an d seal jacketed cable
All dimensions for reference only.
Inches
Shell
Size L
Approx.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
Z
Open Closed
10SL 2.740 .559 .717 .110 .717 1.000 .126 .312 .094
14S 2.898 .559 .969 .126 .906 1.181 .126 .438 .230
16S 2.898 .559 1.079 .126 .969 1.280 .126 .531 .315
16 3.217 .748 1.079 .126 .969 1.280 .126 .531 .315
18 3.307 .748 1.213 .157 1.063 1.378 .126 .625 .378
20 3.311 .748 1.346 .157 1.157 1.496 .126 .748 .445
22 3.350 .748 1.472 .157 1.252 1.614 .126 .748 .445
24 3.484 .811 1.610 .157 1.374 1.752 .146 .937 .610
28 3.736 .811 1.839 .157 1.563 2.000 .146 .937 .610
32 4.142 .874 2.102 .157 1.752 2.244 .169 1.250 .921
36 4.390 .874 2.346 .157 1.937 2.500 .169 1.378 .921
40 4.988 .874 2.579 .157 2.185 2.752 .169 1.624 1.177
Millimeters
Shell
Size L
Approx.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
Z
Open Closed
10SL 69.6 14.2 18.2 2.8 18.2 25.4 3.2 7.93 2.38
14S 73.6 14.2 24.6 3.2 23.0 30.0 3.2 11.12 5.84
16S 73.6 14.2 27.4 3.2 24.6 32.5 3.2 13.48 8.00
16 81.7 19.0 27.4 3.2 24.6 32.5 3.2 13.48 8.00
18 84.0 19.0 30.8 4.0 27.0 35.0 3.2 15.87 9.60
20 84.1 19.0 34.2 4.0 29.4 38.0 3.2 19.00 11.30
22 85.1 19.0 37.4 4.0 31.8 41.0 3.2 19.00 11.30
24 88.5 20.6 40.9 4.0 34.9 44.5 3.7 23.80 15.50
28 94.9 20.6 46.7 4.0 39.7 50.8 3.7 23.80 15.50
32 105.9 22.2 53.4 4.0 44.5 57.0 4.3 31.75 23.40
36 111.5 22.2 59.6 4.0 49.2 63.5 4.3 35.00 23.40
40 126.7 22.2 65.5 4.0 55.5 69.9 4.3 41.25 29.90
36
GT00G
wall mount receptacle for front panel mounting
• Fou r through mount ing holes or optional threade d holes
• Includes backshell with individual wire sealing grommet
• For use with hea t-sh rink tubing
• Environment proof
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .559 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .559 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .559 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .748 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .748 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .748 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .748 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .811 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .811 1.839 .157 1.563 2.000 .146 1.062 1.358 1.488 1.630
32 .138 .598 2.756 .874 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .874 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .874 2.579 1.57 2.185 2.752 .169 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Min. B
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 14.2 18.2 2.8 18.2 25.4 3.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 14.2 24.6 3.2 23.0 30.0 3.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 14.2 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
16 3.5 11.5 60 19.0 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
18 3.5 11.5 60 19.0 30.8 4.0 27.0 35.0 3.2 14.6 21.9 23.9 26.5
20 3.5 12.7 65 19.0 34.2 4.0 29.4 38.0 3.2 18.7 26.2 29.6 30.2
22 3.5 12.7 65 19.0 37.4 4.0 31.8 41.0 3.2 20.8 26.2 29.6 33.6
24 3.5 12.7 65 20.6 40.9 4.0 34.9 44.5 3.7 24.6 34.5 37.8 36.1
28 3.5 12.7 65 20.6 46.7 4.0 39.7 50.8 3.7 27.0 34.5 37.8 41.4
32 3.5 15.2 70 22.2 53.4 4.0 44.5 57.0 4.3 33.3 43.6 47.8 48.6
36 3.5 15.2 80 22.2 59.6 4.0 49.2 63.5 4.3 38.5 43.6 47.8 54.8
40 3.5 15.5 80 22.2 65.5 4.0 55.5 69.9 4.3 48.2 52.6 57.8 61.0
37
GT00LCF/00LCFZ
wall mount receptacle for front panel mounting
GT00LCF
• Includes a backshell with extended length to provide
more working room for stripped jacketed cable
• Environment proof
• Fou r through mount ing holes or optional threade d holes
• Includes clamp to grip and seal jacketed cable
GT00LCFZ
• Sam e as G T00LCF except : indi vi dua l wir e sea ling grommet
included for added moisture protection
• Environment proof
• Fou r through mount ing holes or op tiona l thr ead ed holes
• Includes clamp to grip an d seal jacketed cable
All dimensions for reference only.
Inches
Shell
Size L
Approx.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
Z
Open Closed
10SL 3.811 .559 .717 .110 .717 1.000 .126 .312 .094
14S 3.843 .559 .969 .126 .906 1.181 .126 .438 .230
16S 3.843 .559 1.079 .126 .969 1.280 .126 .531 .315
16 4.217 .748 1.079 .126 .969 1.280 .126 .531 .315
18 4.409 .748 1.213 .157 1.063 1.378 .126 .625 .378
20 4.409 .748 1.346 .157 1.157 1.496 .126 .748 .445
22 4.413 .748 1.472 .157 1.252 1.614 .126 .748 .445
24 4.535 .811 1.610 .157 1.374 1.752 .146 .937 .610
28 4.744 .811 1.839 .157 1.563 2.000 .146 .937 .610
32 5.079 .874 2.102 .157 1.752 2.244 .169 1.250 .921
36 5.327 .874 2.346 .157 1.937 2.500 .169 1.378 .921
40 5.327 .874 2.579 .157 2.185 2.752 .169 1.624 1.177
Millimeters
Shell
Size L
Approx.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
Z
Open Closed
10SL 96.8 14.2 18.2 2.8 18.2 25.4 3.2 7.93 2.38
14S 97.6 14.2 24.6 3.2 23.0 30.0 3.2 11.12 5.84
16S 97.6 14.2 27.4 3.2 24.6 32.5 3.2 13.48 8.00
16 107.1 19.0 27.4 3.2 24.6 32.5 3.2 13.48 8.00
18 112.0 19.0 30.8 4.0 27.0 35.0 3.2 15.87 9.60
20 112.0 19.0 34.2 4.0 29.4 38.0 3.2 19.00 11.30
22 112.1 19.0 37.4 4.0 31.8 41.0 3.2 19.00 11.30
24 115.2 20.6 40.9 4.0 34.9 44.5 3.7 23.80 15.50
28 120.5 20.6 46.7 4.0 39.7 50.8 3.7 23.80 15.50
32 129.0 22.2 53.4 4.0 44.5 57.0 4.3 31.75 23.40
36 135.3 22.2 59.6 4.0 49.2 63.5 4.3 35.00 23.40
40 135.3 22.2 65.5 4.0 55.5 69.9 4.3 41.25 29.90
38
GT00R
wall mount receptacle for front panel mounting
• Fou r through mount ing holes or optional threade d holes
• With individua l wire sea ling grommet
• Includes backshell for conduit termination
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .559 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .559 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .559 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .748 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .748 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .866 .374 2.362 .748 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .748 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.559 .811 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.559 .811 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.559 .874 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .874 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .874 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 14.2 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 14.2 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 14.2 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 19.0 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 19.0 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 19.0 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 19.0 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 20.6 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 20.6 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 22.2 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 22.2 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 22.2 65.5 4.0 55.5 69.9 4.3
39
GT00RV
wall mount receptacle for front panel mounting
• Fou r through mount ing holes or optional threade d holes
• Includes wi re sealing grommet
• For use with individual wires
• Environment proof
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 KK
Max.
10SL 1.890 .559 .717 .110 .717 1.000 .126 .787
14S 1.890 .559 .969 .126 .906 1.181 .126 .945
16S 1.890 .559 1.079 .126 .969 1.280 .126 1.024
16 2.205 .748 1.079 .126 .969 1.280 .126 1.024
18 2.244 .748 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .748 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .748 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .811 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .811 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .874 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .874 2.346 .157 1.937 2.500 .169 2.283
40 2.362 .874 2.579 .157 2.185 2.752 .169 2.539
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 KK
Max.
10SL 48.0 14.2 18.2 2.8 18.2 25.4 3.2 20.0
14S 48.0 14.2 24.6 3.2 23.0 30.0 3.2 24.0
16S 48.0 14.2 27.4 3.2 24.6 32.5 3.2 26.0
16 56.0 19.0 27.4 3.2 24.6 32.5 3.2 26.0
18 57.0 19.0 30.8 4.0 27.0 35.0 3.2 29.5
20 57.0 19.0 34.2 4.0 29.4 38.0 3.2 33.0
22 57.0 19.0 37.4 4.0 31.8 41.0 3.2 36.0
24 57.0 20.6 40.9 4.0 34.9 44.5 3.7 40.0
28 57.0 20.6 46.7 4.0 39.7 50.8 3.7 46.0
32 60.0 22.2 53.4 4.0 44.5 57.0 4.3 51.5
36 60.0 22.2 59.6 4.0 49.2 63.5 4.3 58.0
40 60.0 22.2 65.5 4.0 55.5 69.9 4.3 64.5
40
GT01A
inline receptacle
• Includes ba ckshel l for access or y attachmen t
• With out wire sealing g rommet and cable clamp
• Non- environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .559 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .559 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .559 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 .748 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .748 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .748 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .748 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .811 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .811 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .874 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .874 2.346 .157 2.386 2.504
40 2.2500-16 UN 2.016 .465 3.150 .874 2.579 .157 2.618 2.756
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max.
10SL 10.4 9.5 50 14.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 14.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 14.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 19.0 27.4 3.2 28.6 32.3
18 19.2 9.5 60 19.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 19.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 19.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 20.6 40.9 4.0 41.3 44.6
28 31.2 9.5 65 20.6 46.7 4.0 47.6 50.9
32 37.8 11.0 65 22.2 53.4 4.0 54.0 57.1
36 45.2 11.8 80 22.2 59.6 4.0 60.6 63.6
40 51.2 11.8 80 22.2 65.5 4.0 66.5 70.0
41
GT01AF/01F
inline receptacle
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max. Z
Nominal KK
Max. LL
Max.
10SL 2.362 .559 .717 .110 .811 .992 .220 .894 4.720
14S 2.441 .559 .969 .126 1.000 1.173 .312 1.083 4.720
16S 2.756 .559 1.079 .126 1.126 1.272 .437 1.181 4.720
16 2.756 .748 1.079 .126 1.126 1.272 .437 1.181 4.921
18 3.031 .748 1.213 .157 1.248 1.370 .562 1.300 4.921
20 3.031 .748 1.346 .157 1.374 1.488 .625 1.476 4.921
22 3.031 .748 1.472 .157 1.500 1.618 .625 1.476 4.921
24 3.346 .811 1.610 .157 1.626 1.756 .750 1.705 4.921
28 3.346 .811 1.839 .157 1.874 2.004 .750 1.705 4.921
32 3.346 .874 2.102 .157 2.126 2.248 .937 2.035 4.921
36 4.134 .874 2.346 .157 2.386 2.504 1.250 2.283 5.315
40 5.118 .874 2.579 .157 2.618 2.756 1.375 2.579 5.709
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max. Z
Nominal KK
Max. LL
Max.
10SL 60 14.2 18.2 2.8 20.6 25.2 5.58 22.7 120
14S 62 14.2 24.6 3.2 25.4 29.8 7.92 27.5 120
16S 70 14.2 27.4 3.2 28.6 32.3 11.09 30.0 120
16 70 19.0 27.4 3.2 28.6 32.3 11.09 30.0 125
18 77 19.0 30.8 4.0 31.7 34.8 14.27 33.0 125
20 77 19.0 34.2 4.0 34.9 37.8 15.87 37.5 125
22 77 19.0 37.4 4.0 38.1 41.1 15.87 37.5 125
24 85 20.6 40.9 4.0 41.3 44.6 19.05 43.3 125
28 85 20.6 46.7 4.0 47.6 50.9 19.05 43.3 125
32 85 22.2 53.4 4.0 54.0 57.1 23.79 51.7 125
36 105 22.2 59.6 4.0 60.6 63.6 31.75 58.0 135
40 130 22.2 65.5 4.0 66.5 70.0 34.92 65.5 145
GT01AF
• W ith cable clamp
• Wire sealing grommet not included
• Non- environment proof
GT01F
• With wire sea ling grommet and ca ble clamp
• For use with individual wires
• Environment proof
42
GT01G
inline receptacle
• Includes wi re sealing grommet
• For use with hea t-sh rink tubing
• Environment proof
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max. Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .559 .717 .110 .811 .992 .303 .524 .610 .669
14S .138 .461 1.969 .559 .969 .126 1.000 1.173 .417 .669 .752 .791
16S .138 .461 1.969 .559 1.079 .126 1.126 1.272 .531 .862 .941 .925
16 .138 .453 2.362 .748 1.079 .126 1.126 1.272 .531 .862 .941 .925
18 .138 .453 2.362 .748 1.213 .157 1.248 1.370 .575 .862 .941 1.043
20 .138 .500 2.559 .748 1.346 .157 1.374 1.488 .736 1.031 1.165 1.189
22 .138 .500 2.559 .748 1.472 .157 1.500 1.618 .819 1.031 1.165 1.323
24 .138 .500 2.559 .811 1.610 .157 1.626 1.756 .969 1.358 1.488 1.421
28 .138 .500 2.559 .811 1.839 .157 1.874 2.004 1.063 1.358 1.488 1.630
32 .138 .598 2.756 .874 2.102 .157 2.126 2.248 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .874 2.346 .157 2.386 2.504 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .874 2.579 1.57 2.618 2.756 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max. Z
Min. B
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 14.2 18.2 2.8 20.6 25.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 14.2 24.6 3.2 25.4 29.8 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 14.2 27.4 3.2 28.6 32.3 13.5 21.9 23.9 23.5
16 3.5 11.5 60 19.0 27.4 3.2 28.6 32.3 13.5 21.9 23.9 23.5
18 3.5 11.5 60 19.0 30.8 4.0 31.7 34.8 14.6 21.9 23.9 26.5
20 3.5 12.7 65 19.0 34.2 4.0 34.9 37.8 18.7 26.2 29.6 30.2
22 3.5 12.7 65 19.0 37.4 4.0 38.1 41.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 20.6 40.9 4.0 41.3 44.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 20.6 46.7 4.0 47.6 50.9 27.0 34.5 37.8 41.4
32 3.5 15.2 70 22.2 53.4 4.0 54.0 57.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 22.2 59.6 4.0 60.6 63.6 38.5 43.6 47.8 54.8
40 3.5 15.5 80 22.2 65.5 4.0 66.5 70.0 48.2 52.6 57.8 61.0
43
GT01LCF/01LCFZ
inline receptacle
GT01LCF
• Long backshell provides more working room for
stripp ed j acketed cable
• Includes ca ble clamp to grip and seal
jacketed cable
• Environment proof
GT01LCFZ
• Sam e as G T01LCF except : indi vi dua l wir e sea ling grommet
included for added moisture protection
• Environment proof
All dimensions for reference only.
Inches
Shell
Size L
Approx.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max.
Z
Open Closed
10SL 3.811 .559 .717 .110 .811 .992 .312 .094
14S 3.843 .559 .969 .126 1.000 1.173 .438 .230
16S 3.843 .559 1.079 .126 1.126 1.272 .531 .315
16 4.217 .748 1.079 .126 1.126 1.272 .531 .315
18 4.409 .748 1.213 .157 1.248 1.370 .625 .378
20 4.409 .748 1.346 .157 1.374 1.488 .748 .445
22 4.413 .748 1.472 .157 1.500 1.618 .748 .445
24 4.535 .811 1.610 .157 1.626 1.756 .937 .610
28 4.744 .811 1.839 .157 1.874 2.004 .937 .610
32 5.079 .874 2.102 .157 2.126 2.248 1.250 .921
36 5.327 .874 2.346 .157 2.386 2.504 1.378 .921
40 5.327 .874 2.579 .157 2.618 2.756 1.624 1.177
Millimeters
Shell
Size L
Approx.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max.
Z
Open Closed
10SL 96.8 14.2 18.2 2.8 20.6 25.2 7.93 2.38
14S 97.6 14.2 24.6 3.2 25.4 29.8 11.12 5.84
16S 97.6 14.2 27.4 3.2 28.6 32.3 13.48 8.00
16 107.1 19.0 27.4 3.2 28.6 32.3 13.48 8.00
18 112.0 19.0 30.8 4.0 31.7 34.8 15.87 9.60
20 112.0 19.0 34.2 4.0 34.9 37.8 19.00 11.30
22 112.1 19.0 37.4 4.0 38.1 41.1 19.00 11.30
24 115.2 20.6 40.9 4.0 41.3 44.6 23.80 15.50
28 120.5 20.6 46.7 4.0 47.6 50.9 23.80 15.50
32 129.0 22.2 53.4 4.0 54.0 57.1 31.75 23.40
36 135.3 22.2 59.6 4.0 60.6 63.6 35.00 23.40
40 135.3 22.2 65.5 4.0 66.5 70.0 41.25 29.90
44
GT01R
inline receptacle
• With individua l wire sea ling grommet
• Includes backshell for conduit termination
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .559 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .559 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .559 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 .748 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .748 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .748 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .748 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .811 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .811 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .874 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .874 2.346 .157 2.386 2.504
40 2.2500-16 UN 2.016 .465 3.150 .874 2.579 .157 2.618 2.756
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max.
10SL 10.4 9.5 50 14.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 14.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 14.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 19.0 27.4 3.2 28.6 32.3
18 19.2 9.5 60 19.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 19.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 19.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 20.6 40.9 4.0 41.3 44.6
28 31.2 9.5 65 20.6 46.7 4.0 47.6 50.9
32 37.8 11.0 65 22.2 53.4 4.0 54.0 57.1
36 45.2 11.8 80 22.2 59.6 4.0 60.6 63.6
40 51.2 11.8 80 22.2 65.5 4.0 66.5 70.0
45
GT01RV
inline receptacle
• Includes wi re sealing grommet
• For use with individual wires
• Environment proof
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max. KK
Max.
10SL 1.890 .559 .717 .110 .811 .992 .787
14S 1.890 .559 .969 .126 1.000 1.173 .945
16S 1.890 .559 1.079 .126 1.126 1.272 1.024
16 2.205 .748 1.079 .126 1.126 1.272 1.024
18 2.244 .748 1.213 .157 1.248 1.370 1.161
20 2.244 .748 1.346 .157 1.374 1.488 1.299
22 2.244 .748 1.472 .157 1.500 1.618 1.417
24 2.244 .811 1.610 .157 1.626 1.756 1.575
28 2.244 .811 1.839 .157 1.874 2.004 1.811
32 2.362 .874 2.102 .157 2.126 2.248 2.028
36 2.362 .874 2.346 .157 2.386 2.504 2.283
40 2.362 .874 2.579 .157 2.618 2.756 2.539
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max. KK
Max.
10SL 48.0 14.2 18.2 2.8 20.6 25.2 20.0
14S 48.0 14.2 24.6 3.2 25.4 29.8 24.0
16S 48.0 14.2 27.4 3.2 28.6 32.3 26.0
16 56.0 19.0 27.4 3.2 28.6 32.3 26.0
18 57.0 19.0 30.8 4.0 31.7 34.8 29.5
20 57.0 19.0 34.2 4.0 34.9 37.8 33.0
22 57.0 19.0 37.4 4.0 38.1 41.1 36.0
24 57.0 20.6 40.9 4.0 41.3 44.6 40.0
28 57.0 20.6 46.7 4.0 47.6 50.9 46.0
32 60.0 22.2 53.4 4.0 54.0 57.1 51.5
36 60.0 22.2 59.6 4.0 60.6 63.6 58.0
40 60.0 22.2 65.5 4.0 66.5 70.0 64.5
46
GT02R/02RFS
box mount receptacle for front panel mounting
All dimensions for reference only.
Inches
Shell
Size L
± .012
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 KK
Max.
10SL .972 .559 .717 .110 .717 1.000 .126 .626
14S .972 .559 .969 .126 .906 1.181 .126 .756
16S .972 .559 1.079 .126 .969 1.280 .126 .882
16 1.331 .748 1.079 .126 .969 1.280 .126 .882
18 1.331 .748 1.213 .157 1.063 1.378 .126 1.008
20 1.331 .748 1.346 .157 1.157 1.496 .126 1.142
22 1.331 .748 1.472 .157 1.252 1.614 .126 1.268
24 1.406 .811 1.610 .157 1.374 1.752 .146 1.390
28 1.406 .811 1.839 .157 1.563 2.000 .146 1.630
32 1.469 .874 2.102 .157 1.752 2.244 .169 1.882
36 1.469 .874 2.346 .157 1.937 2.500 .169 2.063
40 1.469 .874 2.579 .157 2.185 2.752 .169 2.323
Millimeters
Shell
Size L
±0.3
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0 KK
Max.
10SL 24.7 14.2 18.2 2.8 18.2 25.4 3.2 15.9
14S 24.7 14.2 24.6 3.2 23.0 30.0 3.2 19.2
16S 24.7 14.2 27.4 3.2 24.6 32.5 3.2 22.4
16 33.8 19.0 27.4 3.2 24.6 32.5 3.2 22.4
18 33.8 19.0 30.8 4.0 27.0 35.0 3.2 25.6
20 33.8 19.0 34.2 4.0 29.4 38.0 3.2 29.0
22 33.8 19.0 37.4 4.0 31.8 41.0 3.2 32.2
24 35.7 20.6 40.9 4.0 34.9 44.5 3.7 35.3
28 35.7 20.6 46.7 4.0 39.7 50.8 3.7 41.4
32 37.3 22.2 53.4 4.0 44.5 57.0 4.3 47.8
36 37.3 22.2 59.6 4.0 49.2 63.5 4.3 52.4
40 37.3 22.2 65.5 4.0 55.5 69.9 4.3 59.0
GT02RFS
Countersunk holes required
when mating with GT06CFGG,
page 57 and GT08CFGG,
page 69
GT02R
• Environm e nt proof when mounted with proper panel
sealing gasket (see page 73)
• For rea r mounting information see page 79
GT02RFS
• Sam e as G T02R except mounting hole s ar e countersunk to allow
mating of plugs with rubber covered coupling nuts
47
GT020R/020RFSM
box mount receptacle for front panel mounting
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A L
± .012
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
–.000
10SL .6250-24UNEF .972 .559 .717 .110 .717 1.000 .126
14S .7500-20UNEF .972 .559 .969 .126 .906 1.181 .126
16S .8750-20UNEF .972 .559 1.079 .126 .969 1.280 .126
16 .8750-20UNEF 1.331 .748 1.079 .126 .969 1.280 .126
18 1.0000-20UNEF 1.331 .748 1.213 .157 1.063 1.378 .126
20 1.1250-18UNEF 1.331 .748 1.346 .157 1.157 1.496 .126
22 1.2500-18UNEF 1.331 .748 1.472 .157 1.252 1.614 .126
24 1.3750-18UNEF 1.406 .811 1.610 .157 1.374 1.752 .146
28 1.6250-18UNEF 1.406 .811 1.839 .157 1.563 2.000 .146
32 1.8750-16UN 1.469 .874 2.102 .157 1.752 2.244 .169
36 2.0625-16UN 1.469 .874 2.346 .157 1.937 2.500 .169
40 2.3125-16UN 1.469 .874 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size L
±0.3
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0
10SL 24.7 14.2 18.2 2.8 18.2 25.4 3.2
14S 24.7 14.2 24.6 3.2 23.0 30.0 3.2
16S 24.7 14.2 27.4 3.2 24.6 32.5 3.2
16 33.8 19.0 27.4 3.2 24.6 32.5 3.2
18 33.8 19.0 30.8 4.0 27.0 35.0 3.2
20 33.8 19.0 34.2 4.0 29.4 38.0 3.2
22 33.8 19.0 37.4 4.0 31.8 41.0 3.2
24 35.7 20.6 40.9 4.0 34.9 44.5 3.7
28 35.7 20.6 46.7 4.0 39.7 50.8 3.7
32 37.3 22.2 53.4 4.0 44.5 57.0 4.3
36 37.3 22.2 59.6 4.0 49.2 63.5 4.3
40 37.3 22.2 65.5 4.0 55.5 69.9 4.3
GT020R
• Thre aded rear to acce p t acces sory hardware
• Environm e nt proof when mounted with proper
panel sealing gasket (see page 73)
• For re ar mounting information see pag e 79
GT020RFSM
• Sam e as GT020R except mou nt ing ho les a re c ount ersun k
to allow mating of plugs with rubber covered coupling nuts
GT020RFSM
Countersunk holes required
when mating with GT06CFGG,
page 57 and GT08CFGG,
page 69
48
GT030
square flange receptacle for rear panel mounting
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A L
± .012
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
–.000
10SL .6250-24UNEF 1.087 .717 .717 .110 .717 1.000 .126
14S .7500-20UNEF 1.087 .717 .969 .126 .906 1.181 .126
16S .8750-20UNEF 1.087 .717 1.079 .126 .969 1.280 .126
16 .8750-20UNEF 1.331 .846 1.079 .126 .969 1.280 .126
18 1.0000-20UNEF 1.331 .907 1.213 .157 1.063 1.378 .126
20 1.1250-18UNEF 1.331 .907 1.346 .157 1.157 1.496 .126
22 1.2500-18UNEF 1.331 .907 1.472 .157 1.252 1.614 .126
24 1.3750-18UNEF 1.331 .907 1.610 .157 1.374 1.752 .146
28 1.6250-18UNEF 1.406 .947 1.839 .157 1.563 2.000 .146
32 1.8750-16UN 1.469 .947 2.102 .157 1.752 2.244 .169
36 2.0625-16UN 1.469 .947 2.346 .157 1.937 2.500 .169
40 2.3125-16UN 1.469 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size L
±0.3
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2
18 33.8 23.05 30.8 4.0 27.0 35.0 3.2
20 33.8 23.05 34.2 4.0 29.4 38.0 3.2
22 33.8 23.05 37.4 4.0 31.8 41.0 3.2
24 33.8 23.05 40.9 4.0 34.9 44.5 3.7
28 35.7 24.05 46.7 4.0 39.7 50.8 3.7
32 37.3 24.05 53.4 4.0 44.5 57.0 4.3
36 37.3 24.05 59.6 4.0 49.2 63.5 4.3
40 37.3 24.05 65.5 4.0 55.5 69.9 4.3
• Fou r through mount ing holes or optional threade d holes
• Thre aded rear to acce p t acces sory att achment
• Environm e nt proof when mounted with a proper
sealing gasket (see page 73)
49
GT030A
square flange receptacle for rear panel mounting
• Fou r through mount ing holes or optional threade d holes
• Backshel l included for acce ssory a ttachment
• W ithout a wire sea ling grommet and cable clamp
• Non- environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3
50
GT030AF/030F
square flange receptacle for rear panel mounting
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Nominal KK
Max. LL
Max.
10SL 2.362 .717 .717 .110 .717 1.000 .126 .220 .894 4.720
14S 2.440 .717 .969 .126 .906 1.181 .126 .312 1.083 4.720
16S 2.756 .717 1.079 .126 .969 1.280 .126 .437 1.181 4.720
16 2.756 .846 1.079 .126 .969 1.280 .126 .437 1.181 4.921
18 3.031 .907 1.213 .157 1.063 1.378 .126 .562 1.300 4.921
20 3.031 .907 1.346 .157 1.157 1.496 .126 .625 1.476 4.921
22 3.031 .907 1.472 .157 1.252 1.614 .126 .625 1.476 4.921
24 3.346 .907 1.610 .157 1.374 1.752 .146 .750 1.705 4.921
28 3.346 .947 1.839 .157 1.563 2.000 .146 .750 1.705 4.921
32 3.346 .947 2.102 .157 1.752 2.244 .169 .937 2.035 4.921
36 4.134 .947 2.346 .157 1.937 2.500 .169 1.250 2.283 5.315
40 5.118 .947 2.579 .157 2.185 2.752 .169 1.375 2.579 5.709
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Nominal KK
Max. LL
Max.
10SL 60 18.20 18.2 2.8 18.2 25.4 3.2 5.58 22.7 120
14S 62 18.20 24.6 3.2 23.0 30.0 3.2 7.92 27.5 120
16S 70 18.20 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120
16 70 21.50 27.4 3.2 24.6 32.5 3.2 11.09 30.0 125
18 77 23.05 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125
20 77 23.05 34.2 4.0 29.4 38.0 3.2 15.87 37.5 125
22 77 23.05 37.4 4.0 31.8 41.0 3.2 15.87 37.5 125
24 85 23.05 40.9 4.0 34.9 44.5 3.7 19.05 43.3 125
28 85 24.05 46.7 4.0 39.7 50.8 3.7 19.05 43.3 125
32 85 24.05 53.4 4.0 44.5 57.0 4.3 23.79 51.7 125
36 105 24.05 59.6 4.0 49.2 63.5 4.3 31.75 58.0 135
40 130 24.05 65.5 4.0 55.5 69.9 4.3 34.92 65.5 145
GT030AF
• In cludes a c able clamp
• Wire sealing grommet not included
• Non- environment proof
• Fou r through mount ing holes or optional threade d holes
GT030F
• Includes a wire sealing grommet and cable clamp
• For use with individual wires
• Environment proof
• Fou r through mount ing holes or op tiona l thr ead ed holes
51
GT030G
square flange receptacle for rear panel mounting
• Fou r through mount ing holes or optional threade d holes
• With wire sealing grommet for individual wires
• Includes ba ckshell for use with heat - shr i nk tu bi ng
• Environment proof
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.063 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .947 2.579 1.57 2.185 2.752 .169 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Min. B
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 18.20 18.2 2.8 18.2 25.4 3.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.20 24.6 3.2 23.0 30.0 3.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.20 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.50 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.05 30.8 4.0 27.0 35.0 3.2 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.05 34.2 4.0 29.4 38.0 3.2 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.05 37.4 4.0 31.8 41.0 3.2 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.05 40.9 4.0 34.9 44.5 3.7 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.05 46.7 4.0 39.7 50.8 3.7 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.05 53.4 4.0 44.5 57.0 4.3 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.05 59.6 4.0 49.2 63.5 4.3 38.5 43.6 47.8 54.8
40 3.5 15.5 80 24.05 65.5 4.0 55.5 69.9 4.3 48.2 52.6 57.8 61.0
52
GT030R
square flange receptacle for rear panel mounting
• Fou r through mount ing holes or optional threade d holes
• With a wire sealing grommet for individual wires
• Includes backshell for conduit termination
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3
53
GT030RV
square flange receptacle for rear panel mounting
• Fou r through mount ing holes or optional threade d holes
• With wire sealing grommet for individual wires
• Environment proof
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 KK
Max.
10SL 1.890 .717 .717 .110 .717 1.000 .126 .787
14S 1.890 .717 .969 .126 .906 1.181 .126 .945
16S 1.890 .717 1.079 .126 .969 1.280 .126 1.024
16 2.205 .846 1.079 .126 .969 1.280 .126 1.024
18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283
40 2.362 .947 2.579 .157 2.185 2.752 .169 2.539
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 KK
Max.
10SL 48.0 18.20 18.2 2.8 18.2 25.4 3.2 20.0
14S 48.0 18.20 24.6 3.2 23.0 30.0 3.2 24.0
16S 48.0 18.20 27.4 3.2 24.6 32.5 3.2 26.0
16 56.0 21.50 27.4 3.2 24.6 32.5 3.2 26.0
18 57.0 23.05 30.8 4.0 27.0 35.0 3.2 29.5
20 57.0 23.05 34.2 4.0 29.4 38.0 3.2 33.0
22 57.0 23.05 37.4 4.0 31.8 41.0 3.2 36.0
24 57.0 23.05 40.9 4.0 34.9 44.5 3.7 40.0
28 57.0 24.05 46.7 4.0 39.7 50.8 3.7 46.0
32 60.0 24.05 53.4 4.0 44.5 57.0 4.3 51.5
36 60.0 24.05 59.6 4.0 49.2 63.5 4.3 58.0
40 60.0 24.05 65.5 4.0 55.5 69.9 4.3 64.5
54
GT06A
straight plug
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max. Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
40 2.2500-16UN 2.016 .465 3.150 2.850
Millimeters
Shell
Size F
Min. K
Min. L
Max. Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
40 51.2 11.8 80 72.4
• W ithou t grommet an d cable clamp
• If a ca ble clamp is required, se e pages 76 and 78
• Non- environment proof
55
GT06AF/06F
straight plug
All dimensions for reference only.
Inches
Shell
Size L
Max. Q
Max. Z
Nominal KK
Max. LL
Max.
10SL 2.165 .898 .220 .894 4.724
14S 2.362 1.150 .312 1.083 4.724
16S 2.756 1.260 .437 1.181 4.724
16 2.756 1.260 .437 1.181 4.921
18 2.953 1.437 .562 1.299 4.921
20 2.953 1.571 .625 1.476 4.921
22 2.953 1.697 .625 1.476 4.921
24 3.543 1.835 .750 1.705 4.921
28 3.543 2.102 .750 1.705 4.921
32 3.543 2.366 .937 2.035 4.921
36 3.937 2.610 1.250 2.283 5.315
40 4.921 2.850 1.375 2.579 5.709
Millimeters
Shell
Size L
Max. Q
Max. Z
Nominal KK
Max. LL
Max.
10SL 55 22.8 5.58 22.7 120
14S 60 29.2 7.92 27.5 120
16S 70 32.0 11.09 30.0 120
16 70 32.0 11.09 30.0 125
18 75 36.5 14.27 33.0 125
20 75 39.9 15.87 37.5 125
22 75 43.1 15.87 37.5 125
24 90 46.6 19.05 43.3 125
28 90 53.4 19.05 43.3 125
32 90 60.1 23.79 51.7 125
36 100 66.3 31.75 58.0 135
40 125 72.4 34.92 65.5 145
GT06AF
• W ith a cable clamp
• W ire se alin g grommet not supplied
• Non- environment proof
GT06F
• With a wire sealing grommet and cable clamp
• For use with individual wires
• Environment proof
56
GT06CF
straight plug
All dimensions for reference only.
Inches
Shell
Size J
Approx. L
Approx. Q
Max. Z
Open Closed
10SL .551 2.752 .898 .312 .094
14S .732 2.898 1.150 .438 .230
16S .732 2.898 1.260 .531 .315
16 .653 3.216 1.260 .531 .315
18 .705 3.307 1.437 .625 .378
20 .705 3.311 1.571 .748 .445
22 .744 3.350 1.697 .748 .445
24 .689 3.484 1.835 .937 .610
28 .921 3.736 2.102 .937 .610
32 1.016 4.142 2.366 1.250 .921
36 1.031 4.390 2.610 1.378 .921
40 1.614 4.640 2.854 1.624 1.177
Millimeters
Shell
Size J
Approx. L
Approx. Q
Max. Z
Open Closed
10SL 14.0 69.6 22.8 7.93 2.38
14S 18.6 73.6 29.2 11.12 5.84
16S 18.6 73.6 32.0 13.48 8.00
16 16.6 81.7 32.0 13.48 8.00
18 17.9 84.0 36.5 15.87 9.60
20 17.9 84.1 39.9 19.00 11.30
22 18.9 85.1 43.1 19.00 11.30
24 17.5 88.5 46.6 23.80 15.50
28 23.4 94.9 53.4 23.80 15.50
32 25.8 105.2 60.1 31.75 23.40
36 26.2 111.5 66.3 35.00 23.40
40 41.0 111.5 72.5 41.25 29.90
• W ith a cable clamp and seal
• For use with jacketed ca ble
• Environment proof
57
GT06CFGG
straight plug
• W ith ru bbe r covered coupling nut for extreme shock
applications
• The shrouded coupling nut protects the plug from damage
• Pro vides a superior gripping surface
• S e als the b ayone t ram p s
• Includes a backshell
• Mates with G T020RF SM (se e page 47)
• Environment proof
All dimensions for reference only.
Inches
Shell
Size J
Approx. L
Approx. Q
Max. S
Dia. Z
Open Closed
10SL .551 3.150 1.319 1.122 .312 .094
18 .701 3.346 1.929 1.713 .625 .378
20 .705 3.937 2.028 1.811 .748 .445
22 .705 3.937 2.224 1.988 .748 .445
24 .689 4.016 2.362 2.126 .937 .610
28 .921 4.291 2.638 2.402 .937 .610
32 1.016 5.315 2.992 2.661 1.250 .921
36 1.031 5.039 3.240 2.925 1.378 .921
40 1.614 5.315 3.465 3.150 1.624 1.177
Millimeters
Shell
Size J
Approx. L
Approx. Q
Max. S
Dia. Z
Open Closed
10SL 14.0 80 33.5 28.5 7.93 2.38
18 17.8 85 49.0 43.5 15.87 9.60
20 17.9 100 51.5 46.0 19.00 11.30
22 17.9 100 56.5 50.5 19.00 11.30
24 17.5 102 60.0 54.0 23.80 15.50
28 23.4 109 67.0 61.0 23.80 15.50
32 25.6 135 76.0 67.6 31.75 23.40
36 26.2 128 82.3 74.3 35.00 23.40
40 41.0 135 88.0 80.0 41.25 29.90
58
GT06G
straight plug
• With a wire sea ling grommet
• For use with individual wires
• Includes a ba ckshel l for use with heat-shrink t ubi ng
• Environment proof
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max. Q
Max. Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .898 .303 .524 .610 .669
14S .138 .461 1.969 1.150 .417 .669 .752 .791
16S .138 .461 1.969 1.260 .531 .862 .941 .925
16 .138 .453 2.362 1.260 .531 .862 .941 .925
18 .138 .453 2.362 1.437 .575 .862 .941 1.043
20 .138 .500 2.559 1.571 .736 1.031 1.165 1.189
22 .138 .500 2.559 1.697 .819 1.031 1.165 1.323
24 .138 .500 2.559 1.835 .969 1.358 1.488 1.421
28 .138 .500 2.559 2.102 1.063 1.358 1.488 1.630
32 .138 .598 2.756 2.366 1.311 1.717 1.882 1.913
36 .138 .598 3.150 2.610 1.516 1.717 1.882 2.157
40 .138 .610 3.150 2.854 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max. Q
Max. Z
Min. BB
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 22.8 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 29.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 32.0 13.5 21.9 23.9 23.5
16 3.5 11.5 60 32.0 13.5 21.9 23.9 23.5
18 3.5 11.5 60 36.5 14.6 21.9 23.9 26.5
20 3.5 12.7 65 39.9 18.7 26.2 29.6 30.2
22 3.5 12.7 65 43.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 46.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 53.4 27.0 34.5 37.8 41.4
32 3.5 15.2 70 60.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 66.3 38.5 43.6 47.8 54.8
40 3.5 15.2 80 72.5 48.2 52.6 57.8 61.0
59
GT06LC
straight plug
All dimensions for reference only. * For example, typical par t number would be:
GTC06LC28-8PA59
Inches
Shell
Size L
Ref. Q
Max.
Cable Range
AXX Part No.
Suffix* Min. Max.
10SL 3.000 .898 A16 .250 .375
14S 3.000 1.150 A54 .375 .500
16S 3.000 1.260 A10 .500 .625
16 3.250 1.260 A12 .625 .750
18 3.250 1.437 A42 .750 .875
20 3.250 1.571 A11 .875 1.000
22 3.250 1.697 A55 1.000 1.125
24 3.250 1.835 A14 1.125 1.250
28 3.600 2.102 A56 1.250 1.375
32 3.600 2.366 A74 1.375 1.500
36 3.600 2.610 A57 1.500 1.625
40 3.600 2.854 A58 1.625 1.750
Millimeters
Shell
Size L
Ref. Q
Max.
Cable Range
AXX Part No.
Suffix* Min. Max.
10SL 76.2 22.8 A16 6.3 9.5
14S 76.2 29.2 A54 9.5 12.7
16S 76.2 32.0 A10 12.7 15.8
16 82.5 32.0 A12 15.8 19.0
18 82.5 36.4 A42 19.0 22.2
20 82.5 39.9 A11 22.2 25.4
22 82.5 43.1 A55 25.4 28.5
24 82.5 46.6 A14 28.5 31.7
28 91.4 53.3 A56 31.7 34.9
32 91.4 60.0 A74 34.9 38.1
36 91.4 66.2 A57 38.1 41.2
40 91.4 72.4 A58 41.2 44.4
• In cludes a ba ckshel l wi th a basket w eave st rai n relief co rd grip
• With a wire sea ling grommet
• Environment proof
60
GT06LCF/06LCFZ
straight plug
All dimensions for reference only.
Inches
Shell
Size J
Approx. L
Approx. Q
Max. Z
Open Closed
10SL 1.654 3.811 .898 .312 .094
14S 1.677 3.843 1.150 .438 .230
16S 1.677 3.843 1.260 .531 .315
16 1.677 4.217 1.260 .531 .315
18 1.803 4.409 1.437 .625 .378
20 1.807 4.409 1.571 .748 .445
22 1.807 4.413 1.697 .748 .445
24 1.752 4.535 1.835 .937 .610
28 1.949 4.756 2.102 .937 .610
32 1.953 5.079 2.366 1.250 .921
36 1.969 5.327 2.610 1.378 .921
40 1.969 5.327 2.854 1.624 1.177
Millimeters
Shell
Size J
Approx. L
Approx. Q
Max. Z
Open Closed
10SL 42.0 96.8 22.8 7.93 2.38
14S 42.6 97.6 29.2 11.12 5.84
16S 42.6 97.6 32.0 13.48 8.00
16 42.6 107.1 32.0 13.48 8.00
18 45.8 112.0 36.5 15.87 9.60
20 45.9 112.0 39.9 19.00 11.30
22 45.9 112.1 43.1 19.00 11.30
24 44.5 115.2 46.6 23.80 15.50
28 49.5 120.8 53.4 23.80 15.50
32 49.6 129.0 60.1 31.75 23.40
36 50.0 135.3 66.3 35.00 23.40
40 50.0 135.3 72.5 41.25 29.90
GT06LCF
• W ith ca ble clamp and s eal
• Long backshell provides more working room
for jacketed cable
• Environment proof
GT06LCFZ
• Sam e as GT06LCF except: Indivi dual wire sea ling
grommet for added moisture
• Environment proof
GT06LCF
• W ith ca ble clamp and s eal
• Long backshell provides more working room
for jacketed cable
• Environment proof
61
GT06PP/064PP
panel plug
All dimensions for reference only.
Inches
Shell
Size L
Approx. Q
Max. Q1
Max. P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL 1.087 .898 .953 .110 .717 1.000 .126
14S 1.091 1.150 1.208 .126 .906 1.181 .126
16S 1.091 1.260 1.319 .126 .969 1.280 .126
16 1.469 1.260 1.319 .126 .969 1.280 .126
18 1.500 1.437 1.510 .157 1.063 1.378 .126
20 1.500 1.571 1.660 .157 1.157 1.496 .126
22 1.500 1.697 1.770 .157 1.252 1.614 .126
24 1.598 1.835 1.910 .157 1.374 1.752 .146
28 1.626 2.102 2.085 .157 1.563 2.000 .146
32 1.764 2.366 2.440 .157 1.752 2.244 .169
36 1.764 2.610 2.660 .157 1.937 2.500 .169
40 1.764 2.850 2.910 .157 2.185 2.752 .169
Millimeters
Shell
Size L
Approx. Q
Max. Q1
Max. P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0
10SL 27.6 22.8 24.2 2.8 18.2 25.4 3.2
14S 27.7 29.2 30.6 3.2 23.0 30.0 3.2
16S 27.7 32.0 33.5 3.2 24.6 32.5 3.2
16 37.3 32.0 33.5 3.2 24.6 32.5 3.2
18 38.1 36.5 38.3 4.0 27.0 35.0 3.2
20 38.1 39.9 42.1 4.0 29.4 38.0 3.2
22 38.1 43.1 44.9 4.0 31.8 41.0 3.2
24 40.6 46.6 48.5 4.0 34.9 44.5 3.7
28 41.3 53.4 52.9 4.0 39.7 50.8 3.7
32 44.8 60.1 61.9 4.0 44.5 57.0 4.3
36 44.8 66.3 67.5 4.0 49.2 63.5 4.3
40 44.8 72.4 73.9 4.0 55.5 69.9 4.3
GT06PP
• Squ ar e flan ge moun ting with four through holes
• Envir onment proof with pr oper panel sealing gasket
(see page 73)
GT064PP
• Squ ar e flan ge moun ting with four through holes
• Environm ent proof with proper panel sealing gasket
(see pa ge 73)
• Incl udes a hea vy duty coup l ing nut
62
GT06R
straight plug
• With a wire sea ling grommet
• In cludes a ba ckshel l for condui t term i nation
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max. Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
40 2.2500-16UN 2.016 .465 3.150 2.850
Millimeters
Shell
Size F
Min. K
Min. L
Max. Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
40 51.2 11.8 80 72.4
63
GT06RV
straight plug
All di m e nsio n s for referenc e on l y.
Inches
Shell
Size L
Max. Q
Max. KK
Max.
10SL 1.417 .898 .787
14S 1.437 1.150 .945
16S 1.437 1.260 1.024
16 1.929 1.260 1.024
18 1.929 1.437 1.161
20 1.969 1.571 1.299
22 1.969 1.697 1.417
24 2.008 1.835 1.543
28 2.008 2.102 1.811
32 2.087 2.366 2.028
36 2.106 2.610 2.283
40 2.126 2.850 2.539
Millimeters
Shell
Size L
Max. Q
Max. KK
Max.
10SL 36.0 22.8 20.0
14S 36.5 29.2 24.0
16S 36.5 32.0 26.0
16 49.0 32.0 26.0
18 49.0 36.5 29.5
20 50.0 39.9 33.0
22 50.0 43.1 36.0
24 51.0 46.6 40.0
28 51.0 53.4 46.0
32 53.0 60.1 51.5
36 53.5 66.3 58.0
40 54.0 72.4 64.5
• With a wire sea ling grommet
• For use with individual wires
• Environment proof
64
GT065SL(*)
straight plug
All dimensions for reference only. * Add suffix 1 or 2 for desired cable range.
Inches
Shell
Size L
Ref. Q
Max. Cable Range
(1)* (2)*
10SL 3.516 1.007 .11–.26 .07–.12
14S 3.628 1.259 .15–.32 .07–.24
16S 3.808 1.410 .19–.39 .11–.28
16 4.355 1.410 .19–.39 .11–.28
18 4.249 1.547 .23–.47 .19–.35
20 4.255 1.681 .39–.56 .27–.47
22 4.329 1.847 .51–.71 .35–.63
24 4.816 1.965 .51–.71 .35–.63
28 4.817 2.222 .70–.98 .51–.79
32 4.817 2.482 .86–1.26 .78–1.02
36 5.048 2.721 1.26–1.50 .98–1.22
40 4.978 2.953 1.45–1.75 1.14–1.38
Millimeters
Shell
Size L
Ref. Q
Max. Cable Range
(1)* (2)*
10SL 89.3 25.5 2.7–6.6 1.7–3.0
14S 92.1 31.9 3.8–8.1 1.7–6.0
16S 96.7 35.8 4.8–9.9 2.7–7.1
16 110.6 35.8 4.8–9.9 2.7–7.1
18 107.9 39.2 5.8–11.9 4.8–8.8
20 108.0 42.6 9.9–14.2 6.8–11.9
22 109.9 46.9 12.9–18.0 8.8–16.0
24 122.3 49.9 12.9–18.0 8.8–16.0
28 122.3 56.4 17.7–24.8 12.9–20.0
32 122.3 63.0 21.8–32.0 19.8–25.9
36 128.2 69.1 32.0–38.1 24.8–30.9
40 126.4 75.0 36.8–44.4 28.9–35.05
• Includes a long heavy duty cou pl in g nut
• Includes a li qui d tight strain reli ef to gr ip and se al ja cketed ca ble
• Environment proof
65
GT07R
jam nut receptacle
• For rear pa nel single hole mo unt ing
• Panel seal O-ring included
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A G
± .012
J
Wall Thickness M
± .012
N
+ .000
– .006 P
± .007 R
± .016 S
± .012Min. Max.
10SL .8750-20 UNEF .441 .094 .205 .965 .717 .157 1.062 1.252
14S 1.1250-18 UNEF .575 .094 .295 1.055 .969 .189 1.312 1.626
16S 1.2500-18 UNEF .618 .094 .295 1.055 1.079 .189 1.500 1.748
16 1.2500-18 UNEF .618 .094 .295 1.264 1.079 .189 1.500 1.748
18 1.3750-18 UNEF .661 .094 .354 1.327 1.213 .189 1.562 1.874
20 1.5000-18 UNEF .709 .094 .358 1.327 1.346 .189 1.750 2.000
22 1.6250-18 UNEF .795 .094 .358 1.327 1.472 .189 2.000 2.252
24 1.7500-18 UNEF .795 .094 .358 1.327 1.610 .189 2.000 2.252
28 2.0000-18 UNS .886 .094 .394 1.386 1.839 .220 2.188 2.500
32 2.2500-16 UN .972 .094 .394 1.386 2.102 .220 2.438 2.748
36 2.5000-16 UN 1.059 .094 .327 1.386 2.346 .220 2.812 3.000
40 2.7500-16 UN 1.165 .094 .327 1.386 2.579 .220 3.000 3.248
Millimeters
Shell
Size G
± 0.3
J
Wall Thickness M
± 0.3
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.4 S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 33.7 37.4 4.8 51 57.2
24 20.2 2.4 9.1 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 35.2 59.6 5.6 71 76.2
40 29.6 2.4 8.3 35.2 65.5 5.6 76 82.5
66
GT070
jam nut receptacle
• For rear panel single hole mounting
• Threaded rear for accessories
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A G
± .012
J
Wall Thickness L
± .010 M
± .012
N
+ .000
– .006 P
± .007 R
± .016 S
± .012
BB
Thread
Class 2AMin. Max.
10SL .8750-20 UNEF .441 .094 .205 1.425 .965 .717 .157 1.062 1.252 .6250-24 UNEF
14S 1.1250-18 UNEF .575 .094 .295 1.531 1.055 .969 .189 1.312 1.626 .7500-20 UNEF
16S 1.2500-18 UNEF .618 .094 .295 1.531 1.055 1.079 .189 1.500 1.748 .8750-20 UNEF
16 1.2500-18 UNEF .618 .094 .295 1.909 1.264 1.079 .189 1.500 1.748 .8750-20 UNEF
18 1.3750-18 UNEF .661 .094 .354 1.941 1.327 1.213 .189 1.562 1.874 1.0000-20 UNEF
20 1.5000-18 UNEF .709 .094 .358 1.941 1.327 1.346 .189 1.750 2.000 1.1250-18 UNEF
22 1.6250-18 UNEF .795 .094 .358 1.941 1.327 1.472 .189 2.000 2.252 1.2500-18 UNEF
24 1.7500-18 UNEF .795 .094 .358 1.953 1.327 1.610 .189 2.000 2.252 1.3750-18 UNEF
28 2.0000-18 UNS .886 .094 .394 2.043 1.386 1.839 .220 2.188 2.500 1.6250-18 UNEF
32 2.2500-16 UN .972 .094 .394 2.043 1.386 2.102 .220 2.438 2.748 1.8750-16 UN
36 2.5000-16 UN 1.059 .094 .327 2.043 1.386 2.346 .220 2.812 3.000 2.0625-16 UN
40 2.7500-16 UN 1.165 .094 .327 2.043 1.386 2.579 .220 3.000 3.248 2.3125-16 UN
Millimeters
Shell
Size G
± 0.3
J
Wall Thickness l
± 0.3 M
± 0.3
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.4 S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 36.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 38.9 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 38.9 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 48.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 49.3 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 49.3 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 49.3 33.7 37.4 4.8 51 57.2
24 20.2 2.4 9.1 49.6 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 51.9 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 51.9 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 51.9 35.2 59.6 5.6 71 76.2
40 29.6 2.4 8.3 51.9 35.2 65.5 5.6 76 82.5
67
GT08A
90° angle plug
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
40 2.2500-16UN 1.923 .496 2.165 3.071 2.850
Millimeters
Shell
Size F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
40 48.8 12.6 55 78 72.4
• W ithout a wire sea ling grommet or clamp
• Non- environment proof
• If a ca ble clamp is required, se e pages 76 and 78
68
GT08AF/08F
90° angle plug
GT08F
• With a wire sealing grommet and cable clamp
• For use with individual wires
• Environment proof
GT08AF
• W ith a cable clamp
• Wire sealing grommet not included
• Non- environment proof
All dimensions for reference only.
Inches
Shell
Size K
Max. L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 1.654 1.772 .898 .220 .894 3.937
14S 1.654 1.850 1.150 .312 1.083 3.937
16S 1.772 1.890 1.299 .437 1.181 3.937
16 1.772 2.244 1.299 .437 1.181 3.937
18 2.087 2.283 1.437 .562 1.299 3.937
20 2.087 2.402 1.571 .625 1.476 3.937
22 2.087 2.402 1.697 .625 1.476 3.937
24 2.283 2.598 1.835 .750 1.705 3.937
28 2.283 2.598 2.102 .750 1.705 3.937
32 2.598 2.835 2.366 .937 2.061 4.331
36 2.717 2.953 2.610 1.250 2.283 4.331
40 3.740 3.071 2.850 1.375 2.579 5.512
Millimeters
Shell
Size K
Max. L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 42 45 22.8 5.58 22.7 100
14S 42 47 29.2 7.92 27.5 100
16S 45 48 33.0 11.09 30.0 100
16 45 57 33.0 11.09 30.0 100
18 53 58 36.5 14.27 33.0 100
20 53 61 39.9 15.87 37.5 100
22 53 61 43.1 15.87 37.5 100
24 58 66 46.6 19.05 43.3 100
28 58 66 53.4 19.05 43.3 100
32 66 72 60.1 23.79 51.7 110
36 69 75 66.3 31.75 58.0 110
40 95 78 72.4 34.92 65.5 140
69
GT08CFGG
90° angle plug
• Rubber covered coupling nut pro vides superior gripping surface
and seals beyo nd ramps
• Includes clamp to grip and seal jacketed cable
• Mat es with GT020RFS M (se e page 47)
• Environment proof
All dimensions for reference only.
Inches
Shell
Size K
Max. L
Max. Q
Dia. S
Dia. ZKK
± .008Open Closed
10SL 2.402 1.929 1.319 1.122 .312 .094 .890
18 2.677 2.520 1.929 1.713 .625 .378 1.220
20 2.677 2.638 2.028 1.811 .748 .445 1.469
22 2.677 2.638 2.205 1.988 .748 .445 1.469
24 2.992 2.874 2.362 2.126 .937 .610 1.654
28 2.992 2.874 2.638 2.402 .937 .610 1.654
32 3.425 3.071 2.992 2.661 1.250 .921 2.126
36 3.858 3.189 3.240 2.925 1.378 .921 2.248
40 4.055 3.307 3.465 3.150 1.624 1.177 2.500
Millimeters
Shell
Size K
Max. L
Max. Q
Dia. S
Dia. ZKK
± 0.2Open Closed
10SL 61 49 33.5 28.5 7.93 2.38 22.6
18 68 64 49.0 43.5 15.87 9.60 31.0
20 68 67 51.5 46.0 19.00 11.30 37.3
22 68 67 56.0 50.5 19.00 11.30 37.3
24 76 73 60.0 54.0 23.80 15.50 42.0
28 76 73 67.0 61.0 23.80 15.50 42.0
32 87 78 76.0 67.6 31.75 23.40 54.0
36 98 81 82.3 74.3 35.00 23.40 57.1
40 103 84 88.0 80.0 41.25 29.90 63.5
70
GT08R
90° angle plug
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
40 2.2500-16UN 1.923 .496 2.165 3.071 2.850
Millimeters
Shell
Size F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
40 48.8 12.6 55 78 72.4
• With a wire sealing grommet for conduit termination
• For use with individual wires
• Environment proof
71
GT05
dummy receptacle
• Square flan ge
• Fou r through mount in g holes
• Stows cable plugs when not in use
All dimensions for reference only.
Inches
Shell
Size
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .559 .717 .110 .717 1.000 .126
14S .559 .969 .126 .906 1.181 .126
16S .559 1.079 .126 .969 1.280 .126
16 .748 1.079 .126 .969 1.280 .126
18 .748 1.213 .157 1.063 1.378 .126
20 .748 1.346 .157 1.157 1.496 .126
22 .748 1.472 .157 1.252 1.614 .126
24 .811 1.610 .157 1.374 1.752 .146
28 .811 1.839 .157 1.563 2.000 .146
32 .874 2.102 .157 1.752 2.244 .169
36 .874 2.346 .157 1.937 2.500 .169
40 .874 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 14.2 18.2 2.8 18.2 25.4 3.2
14S 14.2 24.6 3.2 23.0 30.0 3.2
16S 14.2 27.4 3.2 24.6 32.5 3.2
16 19.0 27.4 3.2 24.6 32.5 3.2
18 19.0 30.8 4.0 27.0 35.0 3.2
20 19.0 34.2 4.0 29.4 38.0 3.2
22 19.0 37.4 4.0 31.8 41.0 3.2
24 20.6 40.9 4.0 34.9 44.5 3.7
28 20.6 46.7 4.0 39.7 50.8 3.7
32 22.2 53.4 4.0 44.5 57.0 4.3
36 22.2 59.6 4.0 49.2 63.5 4.3
40 22.2 65.5 4.0 55.5 69.9 4.3
72
GTTB
thru-bulkhead receptacles
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+.016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL 1.488 .717 .717 .110 .717 1.000 .126
14S 1.488 .717 .969 .126 .906 1.181 .126
16S 1.488 .717 1.079 .126 .969 1.280 .126
16 2.049 .846 1.079 .126 .969 1.280 .126
18 2.049 .907 1.213 .157 1.063 1.378 .126
20 2.049 .907 1.346 .157 1.157 1.496 .126
22 2.049 .907 1.472 .157 1.252 1.614 .126
24 2.049 .907 1.610 .157 1.374 1.752 .146
28 2.049 .947 1.839 .157 1.563 2.000 .146
32 2.049 .947 2.102 .157 1.752 2.244 .169
36 2.049 .947 2.346 .157 1.937 2.500 .169
40 2.049 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size L
Max.
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+ .004
– .000
10SL 37.7 18.2 18.2 2.8 18.2 25.4 3.2
14S 37.7 18.2 24.6 3.2 23.0 30.0 3.2
16S 37.7 18.2 27.4 3.2 24.6 32.5 3.2
16 52.0 21.5 27.4 3.2 24.6 32.5 3.2
18 52.0 23.0 30.8 4.0 27.0 35.0 3.2
20 52.0 23.0 34.2 4.0 29.4 38.0 3.2
22 52.0 23.0 37.4 4.0 31.8 41.0 3.2
24 52.0 23.0 40.9 4.0 34.9 44.5 3.7
28 52.0 24.0 46.7 4.0 39.7 50.8 3.7
32 52.0 24.0 53.4 4.0 44.5 57.0 4.3
36 52.0 24.0 59.6 4.0 49.2 63.5 4.3
40 52.0 24.0 65.5 4.0 55.5 69.9 4.3
• Acc ept s m ati ng plug on both sides
• Fou r through mount in g holes
73
GT Connectors – accessories
10-40450, 10-36675, 10-580649 sealing gaskets
The Amphenol® plain flat gasket of synthetic rubber material
is provided to take complete advantage of waterproof and
pressure sealing features. It is for use with the flange
mounted receptacle.
This flat gasket is provided to give the m aximum in connector
perfor mance. Its special feature is in providing the maximum
radio shielding under difficult conditions of high receiver sen-
sitivity and low signal strength while retaining the sealing
characteristics of the plain gasket. This gasket is for use with
the flange mounting receptacle.
This gasket is provided for applications where the major
requirement is resistance to the injur ious effects of ex tremely
low temperature. Even at temperatures as low as –67°F this
gasket retains its resiliency and will seal a pressure differen-
tial of 30 psi.
The rear panel gasket is equivalent to the plain flat gasket
made of synthetic rubber material, and is used for bac k panel
mounting.
Inches
Installa tio n Dimen sions
MS
Shell
Size A
±.010
Fr ont Panel
Versions
B
+.016
– .000
Rear Panel
Version
B
+.016
– .000
C
+.016
– .000 D
±.010
10SL .719 .625 .724 1.000 .172
14S .906 .875 .976 1.188 .172
16S .969 1.000 1.087 1.281 .172
16 .969 1.000 1.087 1.281 .172
18 1.063 1.125 1.220 1.375 .203
20 1.156 1.250 1.354 1.500 .203
22 1.250 1.375 1.480 1.625 .203
24 1.375 1.500 1.618 1.750 .203
28 1.563 1.750 1.846 2.000 .203
32 1.750 2.000 2.110 2.250 .219
36 1.938 2.188 2.354 2.500 .219
40 2.188 2.438 2.587 2.750 .219
Millimeters
Installa tio n Dimen sions
MS
Shell
Size A
±0.2
Fr ont Panel
Versions
B
+0.4
–0.0
Rear Panel
Version
B
+0.4
–0.0
C
+0.4
–0.0 D
±0.2
10SL 18.2 15.9 18.4 25.4 4.36
14S 23.0 22.2 24.8 30.2 4.36
16S 24.6 25.4 27.6 32.5 4.36
16 24.6 25.4 27.6 32.5 4.36
18 27.0 28.57 31.0 35.0 5.15
20 29.4 31.75 34.4 38.1 5.15
22 31.8 34.9 37.6 41.2 5.15
24 34.9 38.1 41.1 44.5 5.15
28 39.7 44.45 46.9 50.8 5.15
32 44.5 50.8 53.6 57.2 5.56
36 49.2 55.57 59.8 63.5 5.56
40 55.6 61.92 65.7 69.9 5.56
Order Data
Fr ont Panel
Plain Version Front Panel
Shieldin g Version
Fr ont Panel
Low Temperature
Version
Rear Panel
Version
10-40450-10 10-40450-10S 10-36675-10 10-580649-10
10-40450-14 10-40450-14S 10-36675-14 10-580649-14
10-40450-16 10-40450-16S 10-36675-16 10-580649-16
10-40450-16 10-40450-16S 10-36675-16 10-580649-16
10-40450-18 10-40450-18S 10-36675-18 10-580649-18
10-40450-20 10-40450-20S 10-36675-20 10-580649-20
10-40450-22 10-40450-22S 10-36675-22 10-580649-22
10-40450-24 10-40450-24S 10-36675-24 10-580649-24
10-40450-28 10-40450-28S 10-36675-28 10-580649-26
10-40450-32 10-40450-32S 10-36675-32 10-580649-32
10-40450-36 10-40450-36S 10-36675-36 10-580649-36
10-40450-40 10-40450-40S 10-36675-40 10-580649-40
74
GT Connectors – accessories
receptacle protection caps
* To complete order number, add shell size and suffix number. For
example, shell size 11 with olive drab cadmium plate wo uld be
10-580902-113.
All di m e nsi on s for referenc e on l y.
Inches
Shell
Size
D
+ .020
– .000 L
Max. N
Max. LL
Approx.
11 .173 .650 .905 5.000
14 .173 .650 1.181 5.000
16 .173 .827 1.280 5.000
17 .173 .650 1.280 5.000
18 .173 .827 1.457 5.000
20 .173 .827 1.594 5.000
22 .173 .827 1.713 5.000
24 .173 .827 1.850 5.000
28 .220 .827 2.126 7.480
32 .220 .827 2.382 7.480
36 .220 .827 2.638 6.890
40 .220 .827 2.874 7.480
Millimeters
Shell
Size
D
+ 0.5
– 0.0 L
Max. N
Max. LL
Approx.
11 4.4 16.5 23.0 127
14 4.4 16.5 30.0 127
16 4.4 21.0 32.5 127
17 4.4 16.5 32.5 127
18 4.4 21.0 37.0 127
20 4.4 21.0 40.5 127
22 4.4 21.0 43.5 127
24 4.4 21.0 47.0 127
28 5.6 21.0 54.0 190
32 5.6 21.0 60.5 190
36 5.6 21.0 67.0 175
40 5.6 21.0 73.0 190
Finish Suffix
Black anodize -XX2
Olive drab cadmium plate -XX3
Olive drab cadmium nickel base -XX9
• Protecti ve metal ca ps w hi ch seal the front of receptacles
• Includes a chain for retention of the cap at the requi r ed
location
• For receptacles: GT00, 01, 02, 020, 030, 070
* 10-580902-XXX
75
GT Connectors – accessories
plug protection caps
• Protective metal caps w hi ch seal the front of plugs
• Includes a chain for retention of the cap at the requi r ed
location
• For recepta cles: GT06, 08
* To complete order number, add shell size and suffix number. For
example, shell size 11 with olive drab cadmium plate wo uld be
10-580903-113.
All di m e nsi on s for referenc e on l y.
Inches
Shell
Size
D
+ .020
– .000 L
Max. N
Max. LL
Approx.
11 .157 .945 .807 5.000
14 .157 .945 1.059 5.000
16 .157 .945 1.169 5.000
17 .157 .945 1.169 5.000
18 .157 .945 1.303 5.000
20 .189 1.260 1.437 5.520
22 .189 1.260 1.563 5.520
24 .189 1.260 1.701 5.520
28 .189 1.260 1.929 7.480
32 .220 1.260 2.193 7.480
36 .220 1.260 2.437 7.480
40 .220 1.260 2.665 7.480
Millimeters
Shell
Size
D
+ 0.5
– 0.0 L
Max. N
Max. LL
Approx.
11 4.0 24 20.5 127
14 4.0 24 26.9 127
16 4.0 24 29.7 127
17 4.0 24 29.7 127
18 4.0 24 33.1 127
20 4.8 32 36.5 140
22 4.8 32 39.7 140
24 4.8 32 43.2 140
28 4.8 32 49.0 190
32 5.6 32 55.7 190
36 5.6 32 61.9 190
40 5.6 32 67.7 190
Finish Suffix
Black anodize -XX2
Olive drab cadmium plate -XX3
Olive drab cadmium nickel base -XX9
* 10-580903-XXX
76
GT Connectors – accessories
M85049/41 (MS3057-A) cable clamp
All dimensions for reference only.
Inches
Part
Number Used with
Shell Size Used with
Bushing B D G F
V
Thread
Class 2B
M85049/41-4A 10SL MS3420-4 .315 .395 .812 .866 .6250-24 UNEF
M85049/41-6A 14S MS3420-6 .442 .395 .875 1.063 .7500-20 UNEF
M85049/41-8A 16 - 16S MS3420-8 .568 .395 .945 1.145 .8750-20 UNEF
M85049/41-10A 18 MS3420-10 .633 .395 .945 1.244 1.0000-20 UNEF
M85049/41-12A 20 - 22 MS3420-12 .758 .395 .945 1.475 1.1875-18 UNEF
M85049/41-16A 24 - 28 MS3420-16 .948 .395 1.031 1.700 1.4375-18 UNEF
M85049/41-20A 32 MS3420-20 1.256 .460 1.094 2.055 1.7500-18 UNS
M85049/41-24A 36 MS3420-24 1.380 .520 1.157 2.265 2.0000-18 UNS
M85049/41-28A 40 MS3420-28 1.625 .520 1.685 2.683 2.2500-16 UN
Millimeters
Part
Number Used with
Shell Size Used with
Bushing B D G F
M85049/41-4A 10SL MS3420-4 8.0 10.0 20.6 22
M85049/41-6A 14S MS3420-6 11.0 10.0 22.2 27
M85049/41-8A 16 - 16S MS3420-8 14.4 10.0 24.0 29
M85049/41-10A 18 MS3420-10 16.1 10.0 24.0 32
M85049/41-12A 20 - 22 MS3420-12 19.2 10.0 24.0 37
M85049/41-16A 24 - 28 MS3420-16 24.1 10.0 26.2 43
M85049/41-20A 32 MS3420-20 31.9 11.7 27.8 52
M85049/41-24A 36 MS3420-24 35.0 13.2 29.4 58
M85049/41-28A 40 MS3420-28 41.3 13.2 42.8 68
• Concentric cable clamps, insure str ai n relief an d central
location of the cable
• Can be used with bushing MS3420
77
GT Connectors – accessories
MS3420 bushing
All dimensions for reference only.
Inches
Part
Number Used with
Cable ClampABCD
MS3420-3 M85049/41-3A .130 .210 .379 2.875
MS3420-4 M85049/41-4A .220 .302 .505 2.750
MS3420-6 M85049/41-6A .312 .427 .619 2.625
MS3420-8 M85049/41-8A .437 .552 .744 2.500
MS3420-10 M85049/41-10A .562 .615 .889 2.375
MS3420-12 M85049/41-12A .625 .740 1.084 2.250
MS3420-16 M85049/41-16A .750 .927 1.314 2.125
MS3420-20 M85049/41-20A .937 1.240 1.598 2.000
MS3420-24 M85049/41-24A 1.250 1.365 1.847 1.875
MS3420-28 M85049/41-28A 1.375 1.614 2.085 1.750
Millimeters
Part
Number Used with
Cable ClampABCD
MS3420-3 M85049/41-3A 3.30 5.3 9.60 73.0
MS3420-4 M85049/41-4A 5.58 7.7 12.80 69.8
MS3420-6 M85049/41-6A 7.92 10.8 15.70 66.8
MS3420-8 M85049/41-8A 11.09 14.0 18.90 63.5
MS3420-10 M85049/41-10A 14.27 15.6 22.58 60.3
MS3420-12 M85049/41-12A 15.87 18.8 27.50 57.1
MS3420-16 M85049/41-16A 19.05 23.5 33.40 53.9
MS3420-20 M85049/41-20A 23.79 31.5 40.60 50.8
MS3420-24 M85049/41-24A 31.75 34.7 46.90 47.6
MS3420-28 M85049/41-28A 34.92 41.0 52.90 44.4
• Bus hing of synthe tic r ubbe r to be used with cable clamps
for protect ion of th e ca ble or w ires
• Can be telescoped for smaller cable diameters
78
GT Connectors – accessories
M85049/2 (MS3057-C) cable clamp
Part
Number Used with
Shell Size
A Thread
Class 2B
in inche s
V Thread
Class 2A
in inche s Used w ith
Bushing
Bushing Opening
Inches Busing Opening
Millimeters
Open Closed Open Closed
M85049/2-4C 10SL .6250-24 UNEF 6-32 UNC MS3420-4A .219 .010 5.56 0.25
M85049/2-6C 14S .7500-20 UNEF 6-32 UNC MS3420-6A
MS3420-4A .312
.219 .114
.020 7.93
5.56 2.89
0.50
M85049/2-8C 16 & 16S .8750-20 UNEF 6-32 UNC MS3420-8A
MS3420-6A .437
.312 .220
.085 11.10
7.93 5.60
2.15
M85049/2-10C 18 1.0000-20 UNEF 6-32 UNC MS3420-10A
MS3420-6A .437
.312 .197
.085 11.10
7.93 5.00
2.15
M85049/2-12C 20 & 22 1.1875-18 UNEF 8-32 UNC MS3420-12A
MS3420-8A .541
.437 .270
.177 13.74
11.10 6.85
4.50
M85049/2-16C 24 & 28 1.4375-18 UNEF 8-32 UNC MS3420-16A
MS3420-12A
MS3420-8A
.748
.541
.437
.429
.260
.186
19.00
13.74
11.10
10.90
6.60
4.72
M85049/2-20C 32 1.75 00-18 UNS .250-20 UNC MS3420-20A
MS3420-16A
MS3420-12A
.937
.748
.541
.620
.441
.273
23.80
19.00
13.74
15.74
11.20
6.93
M85049/2-24C 36 2.00 00-18 UNS .250-20 UNC MS3420-24A
MS3420-20A
MS3420-16A
1.122
.937
.748
.681
.504
.358
28.50
23.80
19.00
17.30
12.80
9.10
M85049/2-28C 40 2.25 00-16 UN .250-20 UNC MS3420-28A
MS3420-20A
MS3420-16A
1.250
.937
.748
.815
512
368
31.75
23.80
19.00
20.70
13.00
9.34
M85049/2-32C 44 2.50 00-16 UN .250-20 UNC MS3420-32A
MS3420-28A 1.874
1.250 1.378
.815 47.60
31.75 35.00
20.70
All dimensions for reference only.
Inches
Part
Number Used with
Shell Size
BE
± .016 F
± .008
G
+ .020
– .000Open Closed
M85049/2-4C 10SL .312 .094 .748 .890 1.272
M85049/2-6C 14S .438 .230 .874 1.016 1.272
M85049/2-8C 16 & 16S .531 .315 1.000 1.106 1.272
M85049/2-10C 18 .625 .378 1.122 1.220 1.390
M85049/2-12C 20 & 22 .748 .445 1.311 1.469 1.40 6
M85049/2-16C 24 &28 .937 .610 1.559 1.654 1.516
M85049/2-20C 32 1.250 .921 1.874 2.126 1.764
M85049/2-24C 36 1.378 .921 2.122 2.248 2.031
M85049/2-28C 40 1.624 1.177 2.374 2.500 2.031
M85049/2-32C 44 1.866 1.421 2.622 2.811 2.189
Millimeters
BE
± 0.4 F
± 0.2
G
+ 0.5
– 0.0Open Closed
7.93 2.38 19.0 22.6 32.3
11.12 5.84 22.2 25.8 32.3
13.48 8.00 25.4 28.1 32.3
15.87 9.60 28.5 31.0 35.3
19.00 11.30 33.3 37.3 35.7
23.80 15.50 39.6 42.0 38.5
31.75 23.40 47.6 54.0 44.8
35.00 23.40 53.9 57.1 51.6
41.25 29.90 60.3 63.5 51.6
47.40 36.10 66.6 71.4 55.6
• Waterproof clamp for jacketed cables
• Prov ides mechanical strain relief plus concentric clamping over a
wide ra nge of ca ble si zes
• A neoprene* g land seal ensu res a water p roof seal on the cable jacket
* Other materials availab le
79
GT – accessories
rear mounting data – receptacles, 10-405996
sealing plugs, sealing ranges, backshell torque forces
REAR MOUNTING DATA
MAXIMUM PANEL THICKNESS
Size
Dimension D
GT00/020 GT030
Inches (mm) Inches (mm)
10SL .146 3.70 .303 7.70
14S .146 3.70 .303 7.70
16S .146 3.70 .303 7.70
16 .145 3.70 .242 6.15
18 .145 3.70 .303 7.70
20 .145 3.70 .303 7.70
22 .145 3.70 .303 7.70
24 .207 5.25 .303 7.70
28 .207 5.25 .343 8.70
32 .241 6.10 .309 7.85
36 .241 6.10 .309 7.85
40 .237 6.02 .309 7.85
SEALING PLUG 10-405996-XX
Sealing plugs are used to fill unused holes in multi-holed
grommet configurations.
All dimensions for reference only.
GROMMET HOLE
SEALING RANGES
Hole Size
Sealing Range
(mm) Inches
16 2.3 – 3.0 .090 – .118
12 3.2 – 4.5 .126 – .177
8 3.8 – 6.5 .150 – .256
4 7.1 – 9.3 .279 – .366
0 10.0 – 13.7 .394 – .539
RECOMMENDED TORQUE FORCES
CONNECTOR BACKSHELLS
Size In./Lb.
Max.
10SL 26
14S 44
16 50
16S 50
18 55
20 65
22 85
24 90
28 114
32 120
36 153
40 170
Order No. Contact
Size Wire
Size Color
Code
Inches
A Dia.
±.010 B
±.005 C
±.010
10-405996-16 16 20-16 Blue .083 .133 .564**
10-405996-12 12 14-12 Yellow .121 .171 .564**
10-405996-8 8 10-8 White .185 .315 .470
10-405996-4 4 4-6 Blue .310 .415 .470
10-405996-0 0 0-2 Yellow .440 .605 1.000
** ± .020 (in.) *** ± 0.5 (mm)
Millimeters
A Dia.
± 0.2 B
± 0.1 C
± 0.2
2.1 3.4 14.3***
3.1 4.3 14.3***
4.7 8.0 11.9
7.9 10.5 11.9
11.2 15.4 25.4
80
Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the
size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style solder con-
tacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt
drop. Gold plated contacts are also available. (See how to order, pg. 83).
SOLDER CONTACTS*
Part
Number Pin/
Socket Mating End
Size Wire Barrel
Size Allowable
Wire Size Test Current**
Amps
10-40569
10-597107-16( ) or
10-40568
Pin
Socket 16 Short 16
16
18
20
22
13
10
7.5
5
10-40599
10-597107-17( ) or
10-40598
Pin
Socket 16 Long 16
16
18
20
22
13
10
7.5
5
10-33646
10-597107-13( ) or
10-33644
Pin
Socket 12 12 12
14 23
17
10-35531
10-35532
Pin
Socket 88 8
10 46
33
10-35529
10-35530
Pin
Socket 44 4
680
60
10-35527
10-35528
Pin
Socket 00 0
1
2
150
125
100
* Solder Wells Filled
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through
all contacts continuously. Please note that the electrical data given is not an establishment of electrical
safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage,
switching su rges, transients, etc. can be expected in a particular circuit.
Table I
CONTACT ARRANGEMENT
SERV ICE R ATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
* Th e values listed in Table I repres ent ope rating val-
ues which include a generous safety factor. It may
be necessary for some applications to exceed the
operating voltages listed here. If this is necessary,
designers will find Table II useful for determining the
degree to which the recommended values of Table I
can be exceeded.
† Not corrected for changes in density due to variations in temperature
** No attempt has been made to recommend operating voltages. The designer must determine his own oper-
ating voltage by the application of a safety factor to the above derating chart to compensate for circuit tran-
sients, surges, etc.
Table II
ALTITUDE VOLTAGE
DERATING** CHART
MS
Service
Rating
Nominal
Distance Standard Sea
Level Conditions Pressure Altitude †
50,000 Feet Pressure Altitude †
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
GT Connectors
solder contacts
81
Machined from copper alloys and silver-plated for maximum corrosion resistance, with a minimum milli-
v olt drop and a maxim um cu rrent carrying capa city, the siz e 16 an d 12 socket cont acts are of the clo sed
entry design. Crimp contacts are available for all MS insert arrangements and are identified with an
Amphenol® proprietary number. Gold plated contacts are also available. (See how to order, pg. 83).
CRIMP CONTACTS*
Part
Number Pin/
Socket Mating End
Size Wire Barrel
Size Allowable
Wire Size Requi re d W i re
Adapter Sleeve Test Current**
Amps
10-40553
10-597109-161 or
10-40552
Pin
Socket 16 Short 16
16
18
20
22*
–
–
–
10-74696-6
13
10
7.5
5
10-40557
10-597109-171 or
10-40556
Pin
Socket 16 Long 16
16
18
20
22*
–
–
–
10-74696-6
13
10
7.5
5
10-40561
10-597109-131 or
10-40560
Pin
Socket 12 12 12
14 –
–23
17
10-40792
10-40793
Pin
Socket 88 8
10* –
10-74696-1 46
33
10-40564
10-40565
Pin
Socket 44 4
6* –
10-74696-2 80
60
10-581806
10-581808
Pin
Socket 00 0
2* –
10-74696-7 150
125
* When using wire adapter sleeve shown
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through
all contacts continuously. Please note that the electrical data given is not an establishment of electrical
safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage,
switching su rges, transients, etc. can be expected in a particular circuit.
Additional contact variations are available; consult Amphenol, Sidney, NY for information.
Table I
CONTACT ARRANGEMENT
SERV ICE R ATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
* Th e values listed in Table I repres ent ope rating val-
ues which include a generous safety factor. It may
be necessary for some applications to exceed the
operating voltages listed here. If this is necessary,
designers will find Table II useful for determining the
degree to which the recommended values of Table I
can be exceeded.
† Not corrected for changes in density due to variations in temperature
** No attempt has been made to recommend operating voltages. The designer must determine his own oper-
ating voltage by the application of a safety factor to the above derating chart to compensate for circuit tran-
sients, surges, etc.
Table II
ALTITUDE VOLTAGE
DERATING** CHART
MS
Service
Rating
Nominal
Distance Standard Sea
Level Conditions Pressure Altitude †
50,000 Feet Pressure Altitude †
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
GT Connectors
crimp contacts
82
When proprietary crimp contacts are employed rather than the standard MS
approved solder contacts, the following application tools are recommended for use.
There is a possibility of additional crimping tools other than those included being
available at present or in the future for this specific application.
Complete instructions for providing reliable crimped wire to contact terminations and
inserting proprietary crimp contacts in GT Series connectors are available in publica-
tion L-1295.
* Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
† Tools used with Arbor Press 11-7364
TOOLING CHART
Crimping
Tool Positioner/
Turret Contact
Size Contact
Style Insertion
Tool Removal
Tool
M22520/1-01 * 16 Pin & Socket 11-7345 11-8250 Kit
M22520/1-01 * 12 Pin & Socket 11-7082 11-8250 Kit
** ** 8 Pin & Socket 11-8220 11-8250 Kit
** ** 4 Pin & Socket 11-7 365-4 † Pin 11-7370-4 †
Socket 11-7674-2 †
** ** 0 Pin & Socket 11-7 365-5 † Pin 11-7370-5 †
Socket 11-7674-3 †
MS Standard
application tools
83
Amphenol GT Connectors
how to order, connector intermateability
Part Number System
GT C 00 A36-5 P W (002)
1234567
1. Contact Style and Insert Material
C = Crimp
S = Solder
CY = Crimp with Viton
SY = Solder with Viton
CL = Crimp with low smoke/flame retardant inserts
SL = Solder with low smoke/flame retardant inserts
No designation required for Neoprene components
2. Shell Style
00 - Wall mount receptacle
01 - Inline r eceptacle
02 - Box mount receptacle
020 - Box mount receptacle with accessory threads
030 - Square flange recept acl e - rear panel mo unt
05 - Dummy receptacle
06 - Straight plug
062 - Straight plug with deep serrated coupling nut*
064 - Panel mounted plug with heavy duty coupling nut
065 - Straight plug with long heavy duty coupling nut
07 - Jam nut receptacle - rear panel mount
070 - Jam nut receptacle with accessory threads
08 - 90° angle plug
TB - Thru-bulkhead
3. Connector Class
See pages 32–72
4. Shell Size and Arrangement
See pages 2–4
For thermocouple arrangements, see pages 27–31
5. Contact Style
P designates pin contacts
S designates socket contacts
6. Alternate Position
W, X, Y and Z - See page 5.
No suffix required for normal position.
7. Connector Modification*
Omit for standard olive drab with silver plated contacts
i.e.: (G96) Black anodize
(014) Olive drab cadmium plate, nickel base
(A24) gold/nickel plated contacts
(025) Black zinc cobalt
(027) Conductive black zinc cobalt
(024) Green zinc cobalt
* Consult Amphenol, Sidney, NY
MATEABILITY WITH
IDENTICAL CONTACT ARRANGEMENTS
Connector Style Ma teable with Style
GT00 GT06 / 062 / 064 / 065 / 08
GT01 GT06 / 062 / 064 / 065 / 08
GT02 GT06 / 062 / 064 / 065 / 08
GT020 GT06 / 062 / 064 / 065 / 08
GT030 GT06 / 062 / 064 / 065 / 08
GT06 / 062 / 064 / 065 GT00 / 01 / 02 / 020 / 03 / 030 / 05 / 070 / TB
GT07 / 070 GT06 / 062 / 064 / 065 / 08
GT08 GT00 / 01 / 02 / 020 / 03 / 030 / 05 / 070 / TB
GTTB GT06 / 062 / 064 / 065 / 08
®
84
Special Application
GT Connectors
GT-PC Connectors f or High Voltage P ow er Appli-
cations
The Amphenol® GT-PC co nn ect or s were develo p ed for us e i n
the Hi gh Voltag e Po w er Dis t ribution i ndu s try. Incorpor at i ng a l l
the standard features of the popular GT series, these con-
nectors will prevent accidental electrical shocks to the techni-
cians. “Dead Front” pin contac t s in si ze 0 are rec essed into a
socket insert, preventing inadvertent contact with a live cir-
cuit. The GT- PC series has been U L approved.
“First Ma te - L ast B reak” features on o ne or mor e of the pins
provide an addi t io nal m easure of operator safety.
Ter mination to the conduc tors is accom plished wi th an Allen
wrench or the traditional crimp or solder method. If Allen
wrench is used, torq ue all en screws 40-50 in . lbs.
Other features of the G T-PC connec to r incl ude:
• Qui ck positive couplin g; audible, tacti le and visual m ating
indicators
• Ful l range of shell st yl es available
• Waterproof
• No l ockwiring required
• W id e selection of backshells and adapters available
• Num erous c onductive and non- conduct i ve plating opt i ons
• Heavy duty, rubber over-molded coupling nut increases
gripping surface and pre vents damage to the connector in
severe environments
• Up to 100 amps pe r contact, continuous current carr ying
capability
• Available in insert patterns:
22-7, 36-4, 36-5, 40 -5 , 40- 57
Consult A mphe nol Aeros pace for availability o f other pat-
terns.
For further information on Amphenol® GT-PC connectors,
request Pr oduct Data Sh eet #173 fro m your local Amphen ol
sales off ice or Amphe nol, Sidney, NY.
GT Connectors for the HMI Lighting Industry
Amphen ol provides the GT connector for the HMI lighting industr y. Thes e connectors
are designe d for the r ugged use exper ienced during st age shows and ot her entertain-
ment events, even outside in the elements. The same GT feature of a three point bayo-
net coupling system which gives visual and tactile indication of full mating, and the
same r uggedness to survive 2000 mating cycle s ar e pr ovided .
Unique features of this connector series include color-coded receptacle shells with
matching backshells on the cable plugs. The colors can be matched to specific wattage
cables and/or light systems. A wide selection of environment adapters designed to seal
on the outsi de diamet er of spe ci fic cable diam et er s can be fitte d to th e backshells.
Applications for these connectors include power and control of lighting trusses, and
portable power and dimmer racks.
For more information on Amphenol® GT connectors for the HMI lighting industry
request Product Data Sheet #174 from your local sales office or Amphenol, Sidney, NY
Amphenol ® GT-PC Connectors with Features
that Provide Increased Operator Safety
