TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series SP05 Series - 30pF 30kV Unidirectional TVS Array RoHS Pb GREEN Description This surface mount family of arrays suppress ESD and other transient overvoltage events. Used to meet the International Electrotechnical Compatibility (IEC transient immunity standards IEC 61000-4-2 for Electrostatic Discharge Requirements), these components can help protect sensitive digital or analog input circuits on data, signal, or control lines with voltage levels up to 5VDC. The monolithic silicon arrays are comprised of specially designed structures for transient voltage suppression (TVS). The size and shape of these structures have be tailored for transient protection. Compared to MOVs, this diode array provides a lower clamping voltage and lower off-state capacitance. Pinout SP0502BAHTG SP0502BAJTG 1 SP0503BAHTG SP0504BAHTG SP0504BAJTG 1 4 1 3 5 Features * An Array of 2, 3, 4, 5 or 6 TVS Avalanche Diodes in a ultra small SC70, SOT-23, SOT-143 or MSOP packages 2 * ESD Capability Standards 2 2 3 SP0505BAHTG SP0505BAJTG 1 6 2 5 3 4 4 3 SP0506BAATG 8 7 6 5 - IEC 61000-4-2, Direct Discharge......... 30kV (Level 4) - IEC 61000-4-2, Air Discharge............... 30kV (Level 4) - MIL STD 883 3015.7...........................................30kV * Input Protection for Applications Up to 5VDC * Fast Response Time...................................................<1ns * Low Input Capacitance....................................30pF Typical * Operating Temperature Range....................-40C to 125C Applications 1 2 3 4 * Mobile phone handsets * Digital still cameras * Personal Digital Assistants (PDA) * Digital video cameras * Portable handheld equipment (Laptop, Palmtop computers) * Moisture Sensitivity Level (MSL-1) * MP3 players * Computer port, keyboard (USB1.1) Additional Information Datasheet Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 Resources Samples TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Absolute Maximum Ratings Rating Units TOP Symbol Operating Temperature Parameter -40 to 125 C TSTOR Storage Temperature -55 to 150 C Notes: CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics TA = +25C, Unless Otherwise Specified Test Conditions Min Typ Max Units Reverse Standoff Voltage Parameter IR 1A - - 5.5 V Reverse Standoff Leakage Current V = 5.0V 1 100 nA 8.5 V -0.8 -0.4 V Signal Clamp Voltage Positive I = 1mA 6.0 Negative I = 10mA -1.2 Clamp Voltage during ESD MIL-STD-883 Method 3015 (HBM) test + 8kV 12 V - 8kV -8 V ESD Test Level (1) IEC-61000-4-2, Contact discharge 30 MIL-STD-883 Method 3015 (HBM) kV 30 Capacitance 2.5V @ 1MHz Turn on/off Time kV 30 pF <1 ns Diode Dynamic Resistance Forward Conduction 1.0 Reverse Conduction 1.4 Note: (1) ESD voltage applied between channel pins and ground, one pin at a time; all other channel pins are open; all ground pins are grounded. Typical Diode Capacitance vs. Reverse Voltage Diode Capacitance (pF) 60 40 20 0 0 1 2 3 4 5 Diode Reverse Voltage (V) (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Soldering Parameters Pb - Free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 5C/second max 5C/second max TS(max) to TL - Ramp-up Rate Reflow tP TP Temperature Reflow Condition - Temperature (TL) (Liquidus) 217C - Temperature (tL) 60 - 150 seconds Peak Temperature (TP) 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Ramp-down Rate 5C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 260C Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-do Ramp-down Preheat TS(min) 25 tS time to peak temperature Time Package Dimensions -- SOT143 e 3 4 3 SP0503BAHTG - SOT143-4 503B B E1 E E1 Recommended Pad Layout 0.80 (.032") E 0.80 (.032") 1.00 (.040") 3.40 (.134") 2.20 (.087") 3.60 (.140") 1.40 (.055") REF MAX e1 2 3.40 (.134") 2.20 3.60 (.140") (.087") REF D A 1.90 (.075") 1.70 (.067") BSC b2 A A1 b 1.00 (.040") 1.20 (.048") c A1 b L L1 L L1 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 0.80 (.032") 1.00 (.040") SOT143-4 4 TO-253 Millimeters Min Max A 0.8 1.22 1.40 (.055") MAX A1 0.05 0.15 1.90 (.075") b 0.30 0.50 1.70 (.067") b2 0.76 0.89 BSC c 0.08 0.20 D 2.80 3.04 1.00 (.040") 0.80 (.032") 2.10 2.64 1.20 (.048") E1.00 (.040") E1 1.20 1.40 e 1.92 BSC e1 0.20 BSC L 0.4 0.6 L1 0.550 REF 1.00 (.040") 2 1 Package Pins JEDEC Inches Min Max 0.03 0.048 0.002 0.006 0.012 0.020 0.030 0.035 0.003 0.008 0.110 0.120 0.082 0.104 0.047 0.055 0.076 BSC 0.008 BSC 0.016 0.024 0.022 REF TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Package Dimensions -- SC70 Package Pins JEDEC B 3 502 1 SP0502BAJTG - SC70-3 HE E 2 e e SC70-3 3 MO-203 A A1 A2 B 0 c D E e HE L P D A2 A A1 C Millimeters Min Max 0.80 1.10 0.00 0.10 0.70 1.00 0.15 0.30 0.08 0.25 1.85 2.25 1.15 1.35 0.66 BSC 2.00 2.40 0.26 0.46 M N Inches Min Max 0.031 0.043 0.00 0.004 0.028 0.039 0.006 0.012 0.003 0.010 0.073 0.089 0.045 0.053 0.026 BSC 0.079 0.094 0.010 0.018 L Package Pins JEDEC e e 5 4 SP0504BAJTG - SC70-5 504 1 E HE 3 2 B P D A2 A A1 c L 6 5 E Recommended Pad Layout HE O (REF) 1 2 N 3 R B + D T A2 A c + P M (REF) + P S (REF) A1 + + + + N (REF) L A A1 A2 B c D E e O HE L M N O P R S T Inches Min Max 0.031 0.043 0.00 0.004 0.028 0.039 0.006 0.012 0.003 0.010 0.073 0.089 0.045 0.053 0.026 BSC 0.079 0.094 0.010 0.018 SC70-6 6 MO-203 SP0505BAJTG - SC70-6 4 505 A A1 A2 B c D EO e HE L Millimeters Min Max 0.80 1.10 0.00 0.10 M 0.70 1.00 0.15 0.30 0.08 0.25 1.85 2.25 1.15 1.35 0.65 BSC 2.00 2.40 0.26 0.46 Package Pins JEDEC e e SC70-5 5 MO-203 N Millimeters Min Max 0.80 1.10 0.00 0.10 0.70 1.00 0.15 0.30 M 0.08 0.25 1.85 2.25 1.15 1.35 0.65 BSC 2.00 2.40 0.26 0.46 1.60 1.30 0.65 0.70 0.35 0.90 2.50 Inches Min Max 0.031 0.043 0.00 0.004 0.028 0.039 0.006 0.012 0.003 0.010 0.073 0.089 0.045 0.053 0.026 BSC 0.079 0.094 0.010 0.018 0.063 0.051 0.026 0.028 0.014 0.035 0.098 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Package Dimensions -- SOT23 Package Pins JEDEC b 3 SP0502BAHTG - SOT23-3 502B E 1 1 E1 E Recommended Pad Layout A A1 b c D E E1 e e1 L1 M N O P 2 e P e1 D M P 0 A A1 N A 0 C L1 1 e1 1 4 504B 1 Recommended Pad Layout E1 E 3 2 B M D P A P O A1 N c O L1 e 5 1 E 2 E1 E Recommended Pad Layout 3 b M D A c L1 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 P O N O A1 L1 P A1 A N SP0505BAHTG - SOT23-6 4 505B E1 A A1 b c D E E1 e e1 L1 M N O P A A1 b c D E E1 e e1 L1 M N O P N Inches Min Max 0.035 0.044 0.0004 0.004 0.012 0.020 0.003 0.008 0.110 0.120 0.083 0.104 0.047 0.055 0.038 BSC 0.075 BSC 0.021 REF .090 0.038 .030TYP .030TYP SOT23-5 5 MO-178 Millimeters Min Max 1.45 0 0.15 0.5 M 0.3 0.08 0.22 2.75 3.05 2.6 3.0 1.45 1.75 0.95 BSC 1.90 BSC 0.60 REF 2.59 0.95 0.69 0.99 Package Pins JEDEC e1 6 N Millimeters Min Max 0.89 1.12 0.01 0.1 0.3 0.5 0.08 0.2 2.8 3.04 2.1 2.64 1.2 1.4 0.95 BSC 1.90 BSC 0.54 REF 2.29 0.95 0.78 0.78 Package Pins JEDEC SP0504BAHTG - SOT23-5 e 5 M SOT23-3 3 TO-236 Inches Min Max 0.057 0 0.006 0.012 0.020 0.003 0.009 0.108 0.120 0.102 0.118 0.057 0.069 0.038 BSC 0.075 BSC 0.024 REF .102 .038 .027TYP .039TYP SOT23-6 6 MO-178 Millimeters Min Max 1.45 0 0.15 0.3 0.5 M 0.08 0.22 2.75 3.05 2.6 3.0 1.45 1.75 0.95 BSC 1.90 BSC 0.60 REF 2.59 0.95 0.69 0.99 Inches Min Max 0.057 0 0.006 0.012 0.020 0.003 0.009 0.108 0.120 0.102 0.118 0.057 0.069 0.038 BSC 0.075 BSC 0.024 REF .102 0.038 .027TYP .039TYP TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Package Dimensions -- MSOP D SP0506BAATG - MSOP-8 E1 H G F1 F A A1 I C B L2 L1 Part Numbering System Blank = NOT Green/RoHS/Lead Free* G= Green/RoHS/Lead Free Product T= Tape & Reel Package Series D E F E1 A A1 B C L1 L2 F F1 G H I I H Millimeters Min Max 2.90 3.10 4.78 4.98 2.90 F1 3.10 0.87 1.17 0.05 0.25 0.30TYP 0.65TYP 0.52 0.54 0.18TYP 5.28 4.24 0.65 0.38 1.04 Inches Min 0.114 .188 .114 .034 .002 0.020 - Max .122 .196 .122 .046 0.010 0.012TYP 0.026TYP 0.021 .007TYP .208 .167 0.026 .015 .041 Product Characteristics SP0502 *** T G TVS Diode Arrays (SPA(R) Diodes) MSOP 8 MO-187 G Recommended Pad Layout LF 506 B E Package Pins JEDEC BAA = MSOP-8 BAH = SOT23-3, -5, -6 or SOT143-4 BAJ = SC70-3, -5 or -6 Number of Channels 02 = 2 channel (SC70-3, SOT23 packages) 03 = 3 channel (SOT143 package) 04 = 4 channel (SC70-5, SOT23-5 package) 05 = 5 channel (SC70-6, SOT23-6 packages) 06 = 6 channel (MSOP-8 package) Lead Plating "G" Green version - Matte Tin (Sn) Lead Material Copper / Iron Alloy Lead Coplanarity 0.004 inches (0.102mm) Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0 Notes: 1. All dimensions are in millimeters. 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. Ordering Information 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. *NOTE: To order NON-Green/RoHS/Lead Free version of product, remove "G" at the end of part number. Part Number CH Package Type Quantity Per Reel SP0502BAHTG 2 SOT23-3 3000 SP0503BAHTG 3 SOT143-4 3000 SP0504BAHTG 4 SOT23-5 3000 SP0505BAHTG 5 SOT23-6 3000 SP0506BAATG 6 MSOP-8 4000 SP0502BAJTG 2 SC70-3 3000 SP0504BAJTG 4 SC70-5 3000 SP0505BAJTG 5 SC70-6 3000 5. Package surface matte finish VDI 11-13. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Embossed Carrier Tape & Reel Specification -- SOT23-3 Symbol 8mm TAPE AND REEL GENERAL INFORMATION 1. 3000 PIECES PER REEL. 2. ORDER IN MULTIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. ACCESS HOLE SOT23-3 (8mm POCKET PITCH) 14.4mm 13mm 180mm 60mm USER DIRECTION OF FEED Millimetres Inches Min Max Min Max E 1.65 1.85 0.065 0.073 F 3.40 3.60 0.134 0.142 P2 1.90 2.10 0.075 0.083 0.063 D 1.40 1.60 0.055 P0 3.90 4.10 0.154 0.161 W 7.70 8.30 0.303 0.327 P 3.90 4.10 0.154 0.161 A0 3.05 3.25 0.120 0.128 B0 2.67 2.87 0.105 0.113 K0 1.12 1.32 0.044 0.052 t 0.22 0.24 0.009 0.009 PIN 1 8.4mm Embossed Carrier Tape & Reel Specification -- SOT23-5 Symbol 8mm TAPE AND REEL COVER TAPE GENERAL INFORMATION 1. 3000 PIECES PER REEL. 2. ORDER IN MULTIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. SOT23-5 (8mm POCKET PITCH) ACCESS HOLE 14.4mm 13mm 60mm 180mm USER DIRECTION OF FEED PIN 1 Millimetres Inches Min Max Min Max E 1.65 1.85 0.065 0.073 F 3.40 3.60 0.134 0.142 P2 1.90 2.10 0.075 0.083 0.063 D 1.40 1.60 0.055 P0 3.90 4.10 0.154 0.161 W 7.70 8.30 0.303 0.327 P 3.90 4.10 0.154 0.161 A0 3.05 3.25 0.120 0.128 B0 2.67 2.87 0.105 0.113 K0 1.12 1.32 0.044 0.052 t 0.22 0.24 0.009 0.009 8.4mm Embossed Carrier Tape & Reel Specification -- SOT23-6 Symbol 8mm TAPE AND REEL GENERAL INFORMATION 1. 3000 PIECES PER REEL. 2. ORDER IN MULTIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. COVER TAPE SOT23-6 (8mm POCKET PITCH) ACCESS HOLE 14.4mm 13mm 180mm 60mm USER DIRECTION OF FEED 8.4mm (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 PIN 1 Millimetres Inches Min Max Min Max E 1.65 1.85 0.065 0.073 F 3.40 3.60 0.134 0.142 P2 1.90 2.10 0.075 0.083 0.063 D 1.40 1.60 0.055 P0 3.90 4.10 0.154 0.161 W 7.70 8.30 0.303 0.327 P 3.90 4.10 0.154 0.161 A0 3.05 3.25 0.120 0.128 B0 2.67 2.87 0.105 0.113 K0 1.12 1.32 0.044 0.052 t 0.22 0.24 0.009 0.009 TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Embossed Carrier Tape & Reel Specification -- SOT143-4 Symbol Pin 1 Millimetres Inches Min Max Min Max A 3.09 3.09 0.122 0.130 B 2.70 2.90 1.106 0.114 C 1.21 1.41 0.048 0.056 d 1.40 1.60 0.055 0.102 E 1.65 0.85 0.065 0.073 F 3.45 3.65 0.133 0.142 P0 4.10 3.90 0.154 0.161 P 4.10 3.90 0.154 0.161 P1 1.90 2.10 0.075 0.083 W 7.90 8.10 0.311 0.319 User Feeding Direction Embossed Carrier Tape & Reel Specification -- MSOP-8 Millimetres Min Min Max E 1.65 1.85 0.065 0.073 F 5.40 5.60 0.213 0.220 D 1.50 1.60 0.059 0.063 1.50 Min D1 User Feeding Direction Inches Max 0.059 Min P0 3.90 4.10 0.154 0.161 W 11.70 12.30 0.461 0.484 P 7.90 8.10 0.311 0.319 A0 5.20 5.40 0.205 0.213 B0 3.30 3.40 0.126 0.134 K0 1.20 1.40 0.047 0.055 t 0.30 0.05 0.012 0.002 Pin 1 Location Embossed Carrier Tape & Reel Specification -- SC70-3 Symbol User Feeding Direction Millimetres Inches Min Max Min Max E 1.65 1.85 0.064 0.073 F 3.45 3.55 0.135 0.139 P2 1.95 2.05 0.077 0.081 D 1.40 1.60 0.055 0.063 D1 1.00 1.25 0.039 0.049 P0 3.90 4.10 0.154 0.161 W 7.70 8.10 0.303 0.318 P 3.90 4.10 0.153 0.161 A0 2.14 2.34 0.084 0.092 B0 2.24 2.44 0.088 0.096 K0 1.12 1.32 0.044 0.052 t 0.27 Max 0.010 Max (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18 TVS Diode Arrays (SPA(R) Diodes) General Purpose ESD Protection - SP05 Series Embossed Carrier Tape & Reel Specification -- SC70-5 Symbol User Feeding Direction Millimetres Inches Min Max Min Max E 1.65 1.85 0.064 0.073 F 3.45 3.55 0.135 0.139 P2 1.95 2.05 0.077 0.081 D 1.40 1.60 0.055 0.063 0.049 D1 1.00 1.25 0.039 P0 3.90 4.10 0.154 0.161 W 7.70 8.10 0.303 0.318 P 3.90 4.10 0.153 0.161 A0 2.14 2.34 0.084 0.092 B0 2.24 2.44 0.088 0.096 K0 1.12 1.32 0.044 0.052 0.27 Max t 0.010 Max Embossed Carrier Tape & Reel Specification -- SC70--6 Symbol User Feeding Direction Millimetres Inches Min Max Min Max E 1.65 1.85 0.064 0.073 F 3.45 3.55 0.135 0.139 P2 1.95 2.05 0.077 0.081 D 1.40 1.60 0.055 0.063 D1 1.00 1.25 0.039 0.049 P0 3.90 4.10 0.154 0.161 0.318 W 7.70 8.10 0.303 P 3.90 4.10 0.153 0.161 A0 2.14 2.34 0.084 0.092 B0 2.24 2.44 0.088 0.096 K0 1.12 1.32 0.044 0.052 t 0.27 Max 0.010 Max Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/15/18