VTSR, VSSR, VSOR Vishay Thin Film Molded, 25 mil or 50 mil Pitch, Dual-In-Line Resistor, Surface Mount Network FEATURES Actual Size Vishay Thin Film resistor networks are designed to be used in either analog or digital circuits. The use of thin film resistive elements within the network allows you to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. Vishay Thin Film resistor networks are packaged in molded plastic packages with sizes that are recognized throughout the world. The rugged packaging offers superior environmental protection and consistent dimensions for ease of placement with automatic SMT equipment. Vishay Thin Film stocks many designs and values for off-the-shelf convenience. With Vishay Thin Film you can depend on quality products delivered on time with service backing the product. * Reduces total assembly costs * Compatible with automatic surface mounting equipment * UL 94 V-0 flame resistant * Thin film tantalum nitride on silicon * Choice of package sizes: VTSR (TSSOP) JEDEC MC-153, VSSR (SSOP or QSOP) JEDEC MS-137, VSOR (SOIC narrow) JEDEC MS-012 * Moisture sensitivity level 1 (per IPC/JEDEC STD-20C) * Isolated/bussed/dual terminator/differential terminator circuits * Compliant to RoHS directive 2002/95/EC TYPICAL PERFORMANCE ABSOLUTE TCR TOL. TRACKING 100 NA ABSOLUTE RATIO 5, 2, 1 NA SCHEMATICS RESISTORS WITH ONE PIN COMMON The 01 circuit provides nominally equal resistors connected between a common pin and a discrete PC board pin. Commonly used in the following applications: * MOS/ROM pull-up/-down * TTL input pull-down * Open collector pull-up * Digital pulse squaring * "Wired OR" pull-up * TTL unused gate pull-up * Power driven pull-up * High speed parallels pull-up Broad selection of standard values available ISOLATED RESISTORS The 03 circuit provides nominally equal resistors isolated from all others and wired directly across. Commonly used in the following applications: * "Wired OR" pull-up * Long-line impedance balancing * Power driven pull-up * LED current limiting * Powergate pull-up * ECL output pull-down * Line termination * TTL input pull-down Broad selection of standard values available DUAL-LINE TERMINATOR; PULSE SQUARING The 05 circuit contains pairs of resistors connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for dual-line termination and pulse squaring. Standard values are: VSSR2005: VSSR1605: R1 = 220 , R2 = 330 R1 = 220 , R2 = 330 R1 = 330 , R2 = 470 R1 = 220 , R2 = 1.8 k R1 = 1.5 k, R2 = 3.3 k 01 SCHEMATIC Resistance Range: 10 to 47 k Lead #1 03 SCHEMATIC Resistance Range: 10 to 47 k Lead #1 05 SCHEMATIC R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R2 R1 R2 R2 R1 R1 R2 R2 R2 R1 R1 R1 R2 R1 R2 Pin 1 47 SCHEMATIC VCC R1 R2 R3 Lead #1 DIFFERENTIAL TERMINATOR The 47 schematic consists of series resistor sections connected between VCC and ground. Each contains 3 resistors of 2 different resistance values. Standard values are: VSSR16 and VTSR16: VSSR20 and VTSR20: R1 = 330 , R2 = 150 R1 = 270 , R2 = 120 R1 = 330 , R2 = 220 GND Document Number: 60003 Revision: 25-Jan-10 For technical questions, contact: thinfilm@vishay.com www.vishay.com 21 VTSR, VSSR, VSOR Vishay Thin Film Molded, 25 mil or 50 mil Pitch, Dual-In-Line Resistor, Surface Mount Network STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking SPECIFICATIONS Tantalum nitride 16, 20, 24 10 to 47 k 100 ppm/C NA 5 % standard ( 2 % available) 1 % standard (check factory) NA 100 mW max. 16 = 1.0 W, 20 = 1.2 W, 24 = 1.4 W 5 ppm/V (typical) 50 VDC - 55 C to + 125 C - 55 C to + 150 C < - 35 dB - Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio CONDITIONS Per E-24 table - 55 C to + 125 C Per E-24 table Per E-96 table At + 70 C 0 C to + 70 C - DIMENSIONS AND IMPRINTING in inches (millimeters) B C Part Marking-Model, Pin Count (Optional), Schematic E Resistance Value Code xxxx F Date Code H G Pin #1 J A W D DIMENSION A - 16 PIN A - 20 PIN A - 24 PIN B (Ref.) C (Ref.) D E (Typ.) F G H J (Ref.) W VTSR-xxxx 0.206 0.003 (5.23 0.08) 0.256 0.003 (6.50 0.08) 0.306 0.003 (7.77 0.08) 0.0256 (0.65) 0.0087 (0.22) 0.004 (0.10) 0.024 (0.61) 0.173 0.003 (4.39 0.08) 0.015 x 45 (0.38) 0.252 0.005 (6.40 0.13) 0.005 (0.13) 0.043 0.005 (1.09 0.13) VSSR-xxxx 0.193 0.004 (4.90 0.010) 0.341 0.003 (8.66 0.08) 0.341 0.003 (8.66 0.08) 0.025 (0.64) 0.010 (0.25) 0.006 (0.15) 0.025 (0.64) 0.154 0.003 (3.91 0.08) 0.015 x 45 (0.38) 0.236 0.008 (5.99 0.20) 0.010 (0.25) 0.064 0.005 (1.63 0.13) VSOR-xxxx 0.390 0.010 (9.91 0.25) NA NA 0.050 (1.27) 0.016 (0.41) 0.008 (0.20) 0.030 (0.76) 0.152 0.003 (3.86 0.08) 0.015 x 45 (0.38) 0.236 0.005 (5.99 0.13) 0.008 (0.20) 0.064 0.005 (1.63 0.13) MARKING MODEL PIN COUNT (Optional) VXXX XX XX VSOR VSSR VTSR 16 20 24 01, 03, 05 or 47 www.vishay.com 22 SCHEMATIC RESISTANCE RESISTANCE DATE CODE XXXX XXX XXXX 1 % RESISTANCE e.g.: 43R2 4 digits are used to express ohmic values only less than 100 . R is used to designate the decimal position 1 %, 2 %, 5 % RESISTANCE e.g.: 103 = 10K The first 2 digits are significant figures, the last digit specifies the number of zeros to follow. OR For technical questions, contact: thinfilm@vishay.com Document Number: 60003 Revision: 25-Jan-10 VTSR, VSSR, VSOR Molded, 25 mil or 50 mil Pitch, Dual-In-Line Resistor, Surface Mount Network Vishay Thin Film MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating 100 % matte tin Lead Coplanarity 0.0005" Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 PACKAGING INFORMATION LEADS TAPE AND REEL TUBES 16 2500 94 20 2500 74 24 2500 62 16 2500 98 20 2500 55 24 2500 55 16 2500 48 VTSR (TSSOP) VSSR (QSOP) 100 Precent of Rated Power MODEL DERATING CURVE 80 60 40 20 0 0 VSOR (SOIC) 70 125 150 Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTSR1601103JTF V T S R 1 6 0 1 V S O R 1 6 0 5 GLOBAL MODEL PIN COUNT SCHEMATIC VTSR VSSR VSOR Lead (Pb)-free (e3) date code > 2705 20 (not VSOR) 24 (not VSOR) 01 (bussed) 03 (isolated) 16 (not VTSR) 20 (not VSOR) 05 (terminator) 47 (terminator) 1 3 3 0 1 RESISTANCE (3, 4 or 6 digits) 3 4 7 1 J T F G T F TOLERANCE PACKAGING XXX: 100R and all 1 %, 2 % and 5 % First 2 digits are significant figures. Last digit specifies number of zeros to follow. XXXX: < 100R 1 % First 3 digits are significant figures. Last digit specifies number of zeros to follow. F = 1.0 % G = 2.0 % J = 5.0 % TAPE AND REEL TF = Full reel 2500 UF = Tubed xxx xxx First 2 digits are significant figures. Last digit specifies number of zeros. G = 2.0 % J = 5.0 % Historical Part Number example: VSSR2001102GT/R (for reference purposes only) VSSR 20 01 102 G T/R MODEL PIN COUNT SCHEMATIC RESISTANCE TOLERANCE PACKAGING Document Number: 60003 Revision: 25-Jan-10 For technical questions, contact: thinfilm@vishay.com www.vishay.com 23 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1