VSKT71.., VSKH71.., VSKL71.., VSKN71.. Series Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 75 A FEATURES * High voltage * Industrial standard package * Low thermal resistance * UL approved file E78996 * Compliant to RoHS directive 2002/95/EC * Designed and qualified for industrial level BENEFITS ADD-A-PAK * Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate PRODUCT SUMMARY IT(AV) or IF(AV) 75 A * Up to 1600 V * High surge capability MECHANICAL DESCRIPTION * Easy mounting on heatsink The ADD-A-PAK Generation VII, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. ELECTRICAL DESCRIPTION These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES IT(AV) or IF(AV) 85 C 75 IO(RMS) As AC switch 165 ITSM, IFSM 50 Hz 1300 60 Hz 1360 50 Hz 8.45 60 Hz 7.68 I2t I2t VRRM TStg TJ Document Number: 94631 Revision: 17-May-10 Range UNITS A kA2s 84.5 kA2s 400 to 1600 V - 40 to 125 C For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 VSKT71.., VSKH71.., VSKL71.., VSKN71.. Series Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 75 A ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V VDRM, MAXIMUM REPETITIVE PEAK OFF-STATE VOLTAGE, GATE OPEN CIRCUIT V 04 400 500 400 06 600 700 600 08 800 900 800 10 1000 1100 1000 12 1200 1300 1200 14 1400 1500 1400 16 1600 1700 1600 VSK.71 IRRM, IDRM AT 125 C mA 15 ON-STATE CONDUCTION PARAMETER SYMBOL Maximum average on-state current (thyristors) IT(AV) Maximum average forward current (diodes) IF(AV) Maximum continuous RMS on-state current, as AC switch TEST CONDITIONS 180 conduction, half sine wave, TC = 85 C IO(RMS) I(RMS) t = 10 ms Maximum peak, one-cycle non-repetitive on-state or forward current ITSM or IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t (1) Maximum value or threshold voltage Maximum value of on-state slope resistance Maximum peak on-state or forward voltage Maximum non-repetitive rate of rise of turned on current VT(TO) (2) rt (2) VALUES or No voltage reapplied 100 % VRRM reapplied 75 165 I(RMS) A 1300 Sinusoidal half wave, initial TJ = TJ maximum 1360 1093 1140 8.45 No voltage reapplied Initial TJ = TJ maximum 100 % VRRM reapplied 7.68 5.97 84.5 Low level (3) 0.96 Low level (3) High level (4) VTM ITM = x IT(AV) VFM IFM = x IF(AV) dI/dt TJ = TJ maximum TJ = TJ maximum TJ = 25 C kA2s 5.45 t = 0.1 ms to 10 ms, no voltage reapplied TJ = TJ maximum High level (4) UNITS 1.08 3.28 2.86 kA2s V m 1.72 V TJ = 25 C, from 0.67 VDRM, ITM = x IT(AV), Ig = 500 mA, tr < 0.5 s, tp > 6 s 150 A/s Maximum holding current IH TJ = 25 C, anode supply = 6 V, resistive load, gate open circuit 250 Maximum latching current IL TJ = 25 C, anode supply = 6 V, resistive load 400 mA Notes (1) I2t for time t = I2t x t x x (2) Average power = V 2 T(TO) x IT(AV) + rt x (IT(RMS)) (3) 16.7 % x x I < I < x I AV AV (4) I > x I AV www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94631 Revision: 17-May-10 VSKT71.., VSKH71.., VSKL71.., VSKN71.. Series ADD-A-PAK Generation VII Power Modules Vishay Semiconductors Thyristor/Diode and Thyristor/Thyristor, 75 A TRIGGERING PARAMETER SYMBOL Maximum peak gate power Maximum average gate power Maximum peak gate current Maximum peak negative gate voltage TEST CONDITIONS VALUES PGM 12 PG(AV) 3.0 IGM 3.0 - VGM 10 TJ = - 40 C Maximum gate voltage required to trigger VGT W A 4.0 Anode supply = 6 V resistive load TJ = 25 C V 2.5 TJ = 125 C 1.7 TJ = - 40 C 270 Anode supply = 6 V resistive load UNITS Maximum gate current required to trigger IGT TJ = 25 C mA Maximum gate voltage that will not trigger VGD TJ = 125 C, rated VDRM applied 0.25 V Maximum gate current that will not trigger IGD TJ = 125 C, rated VDRM applied 6 mA VALUES UNITS 15 mA 3000 (1 min) 3600 (1 s) V 1000 V/s VALUES UNITS - 40 to 125 C 150 TJ = 125 C 80 BLOCKING PARAMETER SYMBOL TEST CONDITIONS Maximum peak reverse and off-state leakage current at VRRM, VDRM IRRM, IDRM TJ = 125 C, gate open circuit Maximum RMS insulation voltage VINS 50 Hz Maximum critical rate of rise of off-state voltage dV/dt TJ = 125 C, linear to 0.67 VDRM THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Junction operating and storage temperature range TEST CONDITIONS TJ, TStg Maximum internal thermal resistance, junction to case per leg RthJC DC operation 0.29 Typical thermal resistance, case to heatsink per module RthCS Mounting surface flat, smooth and greased 0.1 C/W A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. to heatsink Mounting torque 10 % busbar 4 Nm 3 Approximate weight Case style JEDEC 75 g 2.7 oz. TO-240AA compatible R CONDUCTION PER JUNCTION DEVICES VSK.71.. SINE HALF WAVE CONDUCTION RECTANGULAR WAVE CONDUCTION 180 120 90 60 30 180 120 90 60 30 0.052 0.062 0.079 0.116 0.197 0.037 0.064 0.085 0.121 0.200 UNITS C/W Note * Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 94631 Revision: 17-May-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 VSKT71.., VSKH71.., VSKL71.., VSKN71.. Series RthJC (DC) = 0.29C/W 120 110 100 90 180 120 90 60 30 80 70 10 20 30 40 50 60 70 180 180 120 90 60 30 160 140 120 100 DC RMS limit 80 60 40 20 Per leg, Tj = 125C 0 80 0 20 40 60 80 100 120 Average on-state current (A) Average on-state current (A) Fig. 1 - Current Ratings Characteristics Fig. 4 - On-State Power Loss Characteristics 1200 130 RthJC (DC) = 0.29C/W Peak half sine wave on-state current (A) Maximum allowable case temperature (C) Maximum average on-state power loss (W) 130 0 120 110 100 DC 180 120 90 60 30 90 80 70 0 Maximum average on-state power loss (W) ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 75 A 20 40 60 80 100 At any rated load condition and with rated Vrrm applied following surge Initial Tj = Tj max @ 60 Hz 0.0083 s @ 50 Hz 0.0100s 1100 1000 900 800 700 600 Per leg 500 120 1 10 100 Average on-state current (A) Number of equal amplitude half cycle current pulses (N) Fig. 2 - Current Ratings Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current 1400 140 180 120 90 60 30 120 100 Peak half sine wave on-state current (A) Maximum allowable case temperature (C) Vishay Semiconductors 80 RMS limit 60 40 20 Per leg, Tj = 125C 0 0 10 20 30 40 50 60 70 80 Average on-state current (A) Fig. 3 - On-State Power Loss Characteristics www.vishay.com 4 1200 1000 Maximum Non-repetitive Surge Current Versus Pulse Train Duration. Control of conduction may not be maintained. Initial Tj = 125C No Voltage Reapplied Rated Vrrm reapplied 800 600 Per leg 400 0.01 0.1 1 Pulse train duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94631 Revision: 17-May-10 VSKT71.., VSKH71.., VSKL71.., VSKN71.. Series ADD-A-PAK Generation VII Power Modules Vishay Semiconductors Thyristor/Diode and Thyristor/Thyristor, 75 A Maximum total on-state power loss (W) 300 RthSA = 0.1 C/W 0.2 C/W 0.3 C/W 0.4 C/W 0.5 C/W 0.7 C/W 1 C/W 1.5 C/W 3 C/W 180 120 90 60 30 250 200 150 100 VSK.71 Series Per module Tj = 125C 50 0 0 20 40 60 80 100 120 140 160 180 0 20 Total RMS output current (A) 40 60 80 100 120 140 Maximum allowable ambient temperature (C) Fig. 7 - On-State Power Loss Characteristics Maximum total power loss (W) 700 RthSA = 0.1 C/W 0.2 C/W 0.3 C/W 0.5 C/W 1 C/W 2 C/W 180 (sine) 180 (rect) 600 500 400 300 200 2 x VSK.71 Series single phase bridge connected Tj = 125C 100 0 0 0 20 40 60 80 100 120 140 160 180 20 40 60 80 100 120 140 Maximum allowable ambient temperature (C) Total output current (A) Fig. 8 - On-State Power Loss Characteristics Maximum total power loss (W) 800 RthSA = 0.1 C/W 0.2 C/W 0.3 C/W 0.5 C/W 1 C/W 700 600 500 120 (rect) 400 300 200 3 x VSK.71 Series three phase bridge connected Tj = 125C 100 0 0 40 80 120 160 Total output current (A) 200 0 20 40 60 80 100 120 140 Maximum allowable ambient temperature (C) Fig. 9 - On-State Power Loss Characteristics Document Number: 94631 Revision: 17-May-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 5 VSKT71.., VSKH71.., VSKL71.., VSKN71.. Series ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 75 A Vishay Semiconductors Instantaneous on-state current (A) 1000 Per leg 100 10 Tj = 125C Tj = 25C 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Instantaneous on-state voltage (V) Transient thermal impedance Z thJC (C/W) Fig. 10 - On-State Voltage Drop Characteristics 1 Steady state value RthJC = 0.29 C/W (DC operation) 0.1 Per leg 0.01 0.001 0.01 0.1 1 10 Square wave pulse duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristics Rec tangular ga te pulse a )Recommend ed load line for ra ted di/ d t: 20 V, 20 ohms tr = 0.5 s, tp >= 6 s b )Recommend ed load line for <= 30% rated di/ dt: 15 V, 40 ohms 10 tr = 1 s, tp >= 6 s (1) PGM = 200 W, tp = 300 s (2) PGM = 60 W, tp = 1 ms (3) PGM = 30 W, tp = 2 ms (4) PGM = 12 W, tp = 5 ms (a) (b) TJ = 25 C 1 TJ = -40 C TJ = 125 C Instantaneous gate voltage (V) 100 (4) (3) (2) (1) VGD IGD 0.1 0.001 0.01 IRK.71../ VSK.71 .91.. Series Frequenc y Limited by PG(AV) 0.1 1 10 100 1000 Instantaneous gate current (A) Fig. 12 - Gate Characteristics www.vishay.com 6 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94631 Revision: 17-May-10 VSKT71.., VSKH71.., VSKL71.., VSKN71.. Series ADD-A-PAK Generation VII Power Modules Vishay Semiconductors Thyristor/Diode and Thyristor/Thyristor, 75 A ORDERING INFORMATION TABLE Device code VSK T 71 1 2 3 / 16 4 1 - Module type 2 - Circuit configuration (see end of datasheet) 3 - Current code (75 A) 4 - Voltage code (see Voltage Ratings table) Note * To order the optional hardware go to www.vishay.com/doc?95172 CIRCUIT CONFIGURATION VSKT VSKH (1) 1 VSKL (1) ~ 1 + 2 3 + (2) 3 4 5 7 6 (3) G1 K1 K2 G2 (4) (5) (7) (6) - 1 2 + 2 (2) 3 4 5 - (1) ~ 1 2 (2) VSKN (1) ~ 3 7 6 (3) G1 K1 (4) (5) + (2) 4 5 (3) K2 G2 (7) (6) + (3) G1 K1 (4) (5) LINKS TO RELATED DOCUMENTS Dimensions Document Number: 94631 Revision: 17-May-10 www.vishay.com/doc?95368 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 7 Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Thyristor DIMENSIONS in millimeters (inches) 29 0.5 (1 0.020) 30 0.5 (1.18 0.020) 35 REF. 18 (0.7) REF. 30 1 (1.18 0.039) 15.5 0.5 (0.6 0.020) 24 0.5 (1 0.020) Viti M5 x 0.8 Screws M5 x 0.8 6.7 0.3 (0.26 0.012) Fast-on tab 2.8 x 0.8 (0.110 x 0.03) Document Number: 95368 Revision: 11-Nov-08 20 0.5 (0.79 0.020) 20 0.5 (0.79 0.020) 92 0.75 (3.6 0.030) 5.8 0.25 (0.228 0.010) 15 0.5 (0.59 0.020) For technical questions, contact: indmodules@vishay.com 4 0.2 (0.157 0.008) 7 6 4 5 3 2 1 6.3 0.2 (0.248 0.008) 22.6 0.2 (0.89 0.008) 80 0.3 (3.15 0.012) www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000