MINITRACK Best in Class Performance For Healthcare SMARTRAC MINITRACK inlays and tags featuring NXP ICODE SLIX ICs are designed for healthcare applications and pharmaceutical product authentication. MINITRACK is a high end product for demanding item level applications. Overview Operating Frequency 13.56 MHz MINITRACK with NXP ICODE SLIX provides 896 bits of user memory, while NXP ICODE SLIX2 boasts an extended user memory of 2,528 bits. The tag provides excellent performance for small item level packages, wristbands and other pharmaceutical applications. It suitable for labelling or sticker usage on small goods. MINITRACK inlays & tags are available in dry, wet and paper-tag format. Antenna & Die-cut Size 14 x 31 mm / 0.55 x 1.22" 18 x 36 mm / 0.71 x 1.42" SMARTRAC's inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management. This ensures a reliable and state-of-the-art product that meets a variety of application needs, where high performance is a critical parameter. Inlays and Tags Integrated Circuit (IC) NXP ICODE SLIX & SLIX2 International Standards ISO 15693 ISO 18000-3 Mode 1 NFC Forum Type 5 Application Areas Healthcare Pharaceutical product authentication smartrac-group.com MINITRACK Best in Class Performance For Healthcare Technical Features IC + Memory Size Format Sales Code NXP ICODE SLIX 14 x 31 mm / 0.55 x 1.22 in dry 3002081 896 bit 18 x 36 mm / 0.71 x 1.42 in wet 3002078 18 x 36 mm / 0.71 x 1.42 in paper-tag 3002077 NXP ICODE SLIX2 14 x 31 mm / 0.55 x 1.22 in dry 3005875 2,528 bit 18 x 36 mm / 0.71 x 1.42 in wet 3005874 18 x 36 mm / 0.71 x 1.42 in paper-tag 3005873 Operating Temperature -40C to 85C / -40F to 185F Adhesive Permanent pressure sensitive adhesive, usage temperature: min. -10C to 90C / min. -14F to 194F Shelf Life +20 C, 50 % RH / 68 F, 50 % RH - minimum 2 years from the date of manufacturing Read range in free air Read Range (cm) 30 25 20 15 10 5 0 SLIX SLIX2 MEETS IEC 61249-2-21 (c) 2018 SMARTRAC N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. info@smartrac-group.com Inlays and Tags smartrac-group.com 05/2017 EN I&T 0058 t- f HALOGEN-FREE i r o n me n Contact: Sales & Customer Service www.smartrac-group.com/contact en v SMARTRAC N.V. . Strawinskylaan 851 . 1077 XX Amsterdam . The Netherlands Phone: +31 20 30 50 150 . Fax: +31 20 30 50 155 r iendl y SMARTRAC TECHNOLOGY GROUP uses three different qualification methods to evaluate the quality and reliability of RFID inlay and tag products. Products are tested according to IEC 60068-2-67 (temperature and humidity), JESD22-A104-B (temperature cycling) and an in-house developed bending test. All the graphs are indicative: performance in real life applications may vary.