NXP Semiconductors SC16IS752/SC16IS762
Dual UART with I2C-bus/SPI interface, 64-byte FIFOs, IrDA SIR
© NXP B.V. 2008. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 19 May 2008
Document identifier: SC16IS752_SC16IS762_7
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
22. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1 General features. . . . . . . . . . . . . . . . . . . . . . . . 1
2.2 I2C-bus features . . . . . . . . . . . . . . . . . . . . . . . . 2
2.3 SPI features . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4 Ordering information. . . . . . . . . . . . . . . . . . . . . 3
5 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 5
6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 6
7 Functional description . . . . . . . . . . . . . . . . . . . 8
7.1 Trigger levels. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.2 Hardware flow control. . . . . . . . . . . . . . . . . . . . 8
7.2.1 Auto-RTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7.2.2 Auto-CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.3 Software flow control . . . . . . . . . . . . . . . . . . . 10
7.3.1 Receive flow control . . . . . . . . . . . . . . . . . . . . 11
7.3.2 Transmit flow control. . . . . . . . . . . . . . . . . . . . 11
7.4 Hardware Reset, Power-On Reset (POR)
and Software Reset . . . . . . . . . . . . . . . . . . . . 13
7.5 Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.5.1 Interrupt mode operation . . . . . . . . . . . . . . . . 15
7.5.2 Polled mode operation . . . . . . . . . . . . . . . . . . 15
7.6 Sleep mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7.7 Break and time-out conditions . . . . . . . . . . . . 16
7.8 Programmable baud rate generator . . . . . . . . 16
8 Register descriptions . . . . . . . . . . . . . . . . . . . 19
8.1 Receive Holding Register (RHR) . . . . . . . . . . 22
8.2 Transmit Holding Register (THR) . . . . . . . . . . 22
8.3 Interrupt Enable Register (IER) . . . . . . . . . . . 22
8.4 FIFO Control Register (FCR) . . . . . . . . . . . . . 23
8.5 Interrupt Identification Register (IIR). . . . . . . . 24
8.6 Line Control Register (LCR) . . . . . . . . . . . . . . 24
8.7 Modem Control Register (MCR). . . . . . . . . . . 26
8.8 Line Status Register (LSR). . . . . . . . . . . . . . . 27
8.9 Modem Status Register (MSR). . . . . . . . . . . . 28
8.10 Scratchpad Register (SPR) . . . . . . . . . . . . . . 28
8.11 Transmission Control Register (TCR). . . . . . . 29
8.12 Trigger Level Register (TLR). . . . . . . . . . . . . . 29
8.13 Transmitter FIFO Level register (TXLVL) . . . . 30
8.14 Receiver FIFO Level register (RXLVL) . . . . . . 30
8.15 Programmable I/O pins Direction register
(IODir). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8.16 Programmable I/O pins State register
(IOState). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8.17 I/O Interrupt Enable register (IOIntEna). . . . . 31
8.18 I/O Control register (IOControl) . . . . . . . . . . . 31
8.19 Extra Features Control Register (EFCR) . . . . 32
8.20 Division registers (DLL, DLH). . . . . . . . . . . . . 32
8.21 Enhanced Features Register (EFR). . . . . . . . 33
9 RS-485 features . . . . . . . . . . . . . . . . . . . . . . . . 33
9.1 Auto RS-485 RTS control. . . . . . . . . . . . . . . . 33
9.2 RS-485 RTS output inversion. . . . . . . . . . . . . 33
9.3 Auto RS-485. . . . . . . . . . . . . . . . . . . . . . . . . . 34
9.3.1 Normal multidrop mode . . . . . . . . . . . . . . . . . 34
9.3.2 Auto address detection. . . . . . . . . . . . . . . . . . 34
10 I2C-bus operation . . . . . . . . . . . . . . . . . . . . . . 35
10.1 Data transfers. . . . . . . . . . . . . . . . . . . . . . . . . 35
10.2 Addressing and transfer formats . . . . . . . . . . 37
10.3 Addressing. . . . . . . . . . . . . . . . . . . . . . . . . . . 39
10.4 Use of subaddresses . . . . . . . . . . . . . . . . . . . 39
11 SPI operation . . . . . . . . . . . . . . . . . . . . . . . . . . 41
12 Limiting values . . . . . . . . . . . . . . . . . . . . . . . . 42
13 Static characteristics . . . . . . . . . . . . . . . . . . . 43
14 Dynamic characteristics. . . . . . . . . . . . . . . . . 45
15 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 52
16 Handling information . . . . . . . . . . . . . . . . . . . 54
17 Soldering of SMD packages. . . . . . . . . . . . . . 54
17.1 Introduction to soldering. . . . . . . . . . . . . . . . . 54
17.2 Wave and reflow soldering. . . . . . . . . . . . . . . 54
17.3 Wave soldering. . . . . . . . . . . . . . . . . . . . . . . . 54
17.4 Reflow soldering. . . . . . . . . . . . . . . . . . . . . . . 55
18 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . 56
19 Revision history . . . . . . . . . . . . . . . . . . . . . . . 57
20 Legal information . . . . . . . . . . . . . . . . . . . . . . 58
20.1 Data sheet status. . . . . . . . . . . . . . . . . . . . . . 58
20.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
20.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 58
20.4 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . 58
21 Contact information . . . . . . . . . . . . . . . . . . . . 58
22 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59