http://www.tracopower.com Page 1 of 3
DC/DC Converters
TEL 2 Series, 2 Watt
Features
◆ Ultracompact DIP-16 plastic package
◆ Wide 2:1 input range
◆ Regulated output
◆ I/O isolation 1500V
◆ Input filter meets EN55022, class A
without ext. components
◆ Low ripple and noise
◆ Indefinite shortcircuit protection
◆ Operating temperature range
–40°C to +75°C
◆ Lead free design, RoHS compliant
◆ 3-year product warranty
The TEL-2 series, comprising 28 models, is a range of isolated 2 Watt converters in
a low profile DIP-16 package. Requiring only 3.25 cm2 of space on the PCB they
provide a complete DC/DC converter without need of any external components.
Wide input range and tightly regulated output voltage qualifies these converters for
many cost critical applications in industrial and consumer electronics.
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEL 2-0510 3.3 VDC 500 mA 70 %
TEL 2-0511 5 VDC 400 mA 73 %
TEL 2-0512 12 VDC 165 mA 75 %
TEL 2-0513 4.5 – 9 VDC 15 VDC 135 mA 73 %
TEL 2-0521 (nominal 5 VDC) ±5 VDC ±200 mA 64 %
TEL 2-0522 ±2 VDC ±85 mA 69 %
TEL 2-0523 ±15 VDC ±65 mA 71 %
TEL 2-1210 3.3 VDC 500 mA 73 %
TEL 2-1211 5 VDC 400 mA 77 %
TEL 2-1212 12 VDC 165 mA 80 %
TEL 2-1213 9 – 18 VDC 15 VDC 135 mA 80 %
TEL 2-1221 (nominal 12 VDC) ±5 VDC ±200 mA 73 %
TEL 2-1222 ±12 VDC ±85 mA 78 %
TEL 2-1223 ±15 VDC ±65 mA 78 %
TEL 2-2410 3.3 VDC 500 mA 72 %
TEL 2-2411 5 VDC 400 mA 77 %
TEL 2-2412 12 VDC 165 mA 80 %
TEL 2-2413 18 – 36 VDC 15 VDC 135 mA 81 %
TEL 2-2421 (nominal 24 VDC) ±5 VDC ±200 mA 74 %
TEL 2-2422 ±12 VDC ±85 mA 78 %
TEL 2-2423 ±15 VDC ±65 mA 80 %
TEL 2-4810 3.3 VDC 500 mA 71 %
TEL 2-4811 5 VDC 400 mA 73 %
TEL 2-4812 12 VDC 165 mA 79 %
TEL 2-4813 36 – 75 VDC 15 VDC 135 mA 79 %
TEL 2-4821 (nominal 48 VDC) ±5 VDC ±200 mA 71 %
TEL 2-4822 ±12 VDC ±85 mA 77 %
TEL 2-4823 ±15 VDC ±65 mA 77 %
Models
UL 60950-1
C
B
Scheme
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TEL 2 Series 2 Watt
Input Specifications
Input current at full load / full load 5 Vin models: 600 mA / 40 mA typ.
(nominal input) 12 Vin models: 220 mA / 20 mA typ.
24 Vin models: 110 mA / 10 mA typ.
48 Vin models: 55 mA / 8 mA typ.
Start-up voltage / 5 Vin models: 4 VDC / 3.5 VDC typ.
under voltage shut down 12 Vin models. 7 VDC / 6.5 VDC typ.
24 Vin models: 12 VDC / 11 VDC typ.
under voltage shut down 48 Vin models. 24 VDC / 22 VDC typ.
Surge voltage (100 msec. max.) 5 Vin models: 11 V max.
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy ±2 % max.
Regulation – Input variation Vin min. to Vin max. 0.5 % max.
– Load variation 25 – 100 % single output models: 0.75 % max.
dual output models: 2.0 % (balanced load)
Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max
Temperature coefficient ±0.02 %/K
Short circuit protection indefinite, automatic recovery
Minimum load 25 % of rated max current (operation at lower
load condition is safe but a higher output ripple
will be experienced)
Capacitive load 3.3 VDC output models: 2’200 µF max.
5 VDC output models: 1’000 µF max.
12 VDC output models: 170 µF max.
15 VDC output models: 110 µF max.
±5 VDC output models: 470 µF max.
±12 VDC output models: 100 µF max.
±15 VDC output models: 47 µF max.
General Specifications
Temperature ranges – Operating –40°C to +75°C (no derating)
– Storage –55°C to +125°C
Humidity (non condensing) 95 % rel. H max.
Reliability, calculated MTBF (MIL-HDBK-217F, @ +25°C, ground benign) >1.2 Mio h
Isolation voltage Input/Output (60 sec.) 1’500 VDC
Isolation capacity Input/Output 250 pF max.
Isolation resistance Input/Output (500 VDC) >1‘000 M Ohm
Switching frequency 300 kHz (PFM)
Safety standards UL/cUL 60950-1 , IEC/EN 60950-1
Safety approval CSA 60950-1-03 (File no. 226037)
www.tracopower.com/products/tel2-csa.pdf
Page 3 of 3
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Specifications can be changed any time without notice.
Outline Dimensions mm (inches)
16
1
7.62
(0.3)
3.2
23.8
(0.6)
(0.1)
78
10 9
2.54
(0.13)
10.16 (0.4)
13.7 (0.54)
1.77
(0.07)
Bottom view
0.5
(0.02)
23.8 (0.94)
15.24
(0.94)
(0.12)
3.0
Pin Single Dual
1–Vin (GND) –Vin (GND)
7No con. No con.
8No con. Common
9+Vout +Vout
10 –Vout –Vout
16 +Vin +Vin
Pin-Out
Pin diameter ø 0.5 ±0.05 (0.02) ±0.002
Tolerances ±0.25 (±0.01)
Rev. 12/0 9
DC/DC Converters
TEL 2 Series 2 Watt
Physical Specifications
Casing material non conductive FR4
Potting material epoxy, UL94V-0 - rated
Weight 5.1 g (0.17oz)
Soldering temperature max. 265°C / 10 sec.
