5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
25
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
ENVIRONMENTALLY-SEALED FOR CHALLENGING
ENVIRONMENTS
The MIL-DTL-5015 AIT/MS series is a cost-effective threaded circular
connector for use in harsh environments. These Amphenol connectors are
sealed to withstand moisture, condensation, vibration and flash-over. Over 286
contact layouts are available, in variations that allow for just power, just signal,
or a mix of both contact types. Available in five mounting styles, nineteen shell
sizes, and solder or crimp termination.
Formerly MIL-C-5015
Power generators
Engines
Sensors
Motion control
Off-road vehicles
Earth-moving equipment
Ships
Mobile equipment
Industrial machinery
Telecommunications
Military, industrial and commercial environments requiring extreme reliability, high-power handling
and cost efficiency.
AGENCY APPROVALS
MIL-DTL-5015 (Formerly MIL-C-5015)
BROAD TEMPERATURE RANGE
These connectors will operate in temperatures ranging from -67°F to +257°F (-55°C to +125°C).
ENVIRONMENTAL
These connectors will perform in the full range of operating conditions as defined in MIL-DTL-5015
and are recommended for conditions where vibration, moisture, pressure and/or temperature are extreme.
RESILIENT INSULATOR AND GROMMET
A resilient neoprene insulator and rear-seal grommet provide a liquid-tight assembly.
RUGGED SHELL
The rugged aluminum alloy shell and hardware are light in weight yet highly resistant to damage
and corrosion. Shells are available in five different styles and in 19 sizes.
WIDE RANGE OF WIRE GAUGES AND CURRENT CARRYING CAPACITY
Up to 150 amps for standard military contacts and up to 255 amps using Radsok® contacts.
Wire gauges from 24 to size 0 AWG.
WIDE VARIETY OF CONTACTS
Machined contacts with silver or gold plating are available in sizes from 16 through 0. Solder,
Crimp, PC, and thermocouple contacts are available.
FEATURES
APPLICATIONS
Amphenol AIT/MS Series MIL-DTL-5015
26
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
I 1/32 1/16 250 200 1,400 1,000 550 400 325 260
A 1/16 1/8 700 500 2,800 2,000 800 600 450 360
D 1/8 3/16 1,250 900 3,600 2,800 900 675 500 400
E 3/16 1/4 1,750 1,250 4,500 3,500 1,000 750 550 440
B 1/4 5/16 2,450 1,750 5,700 4,500 1,100 825 600 480
C 5/16 1 4,200 3,000 8,500 7,000 1,300 975 700 560
TECHNICAL
SPECIFICATIONS MATERIALS & FINISHES
Shell Aluminum alloy
Plating Olive drab chromate coating over cadmium plating to QQ-P-416; black alloy,
conductive black alloy, electroless nickel, anodized or green zinc
Contacts Brass or copper alloy
Platings Silver plating to QQ-S-365 (solder contacts have tinned solder pot)
Gold plating to MIL-G-45204
Insulator Resilient Neoprene®, Viton®*, low-smoke, zero-halogen (LSZH)
CONTACT TEST CURRENT POTENTIAL DROP CONTACT RESISTANCE
SIZE (AMPS) (MILLIVOLTS) (MILLIOHM) MAX.
16 13 49 6
12 23 (50*) 42 3
8 46 (69*) 26 (20*) 1 (0.44*)
4 80 (80*) 23 (18*) 0.5 (0.23*)
0 150 (225*) 21 (27*) 0.2 (0.18*)
Current Rating & Contact Resistance
Maximum total current to be carried per connector in wire bundles as specified in MIL-W-5088.
Contact resistance when tested to MIL-C-39029 will not exceed voltage drops listed in above table.
*Using non-military crimp Radsok contact
ELECTRICAL DATA
Operating Voltage/Test Voltage
NOMINAL
DISTANCE (IN.)
OPERATING
VOLTAGE*
STANDARD
SEA LEVEL
CONDITIONS
PRESSURE
ALTITUDE†
50,000 FEET
PRESSURE
ALTITUDE†
70,000 FEET
MS
SERVICE
RATING
AIRSPACE CREEPAGE DC V AC
VRMS
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
Viton® is a registered trademark of Dupont Dow Elastomers
* Each insulator has a specific service rating. These should be used by the designer only as a guide.
The Service Ratings for each layout are listed on a pages 72-93.
Not corrected for change in density resulting from variations in temperature
MS connectors show no evidence of breakdown when the given test voltages are applied between
the two closest contacts and between the shell and the contacts closest to the shell for a period of
one minute, per MIL-STD-1344 Method 3001.
27
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
Polarization Integral key and keyway plus optional rotational
polarization
aSee pages 83-93 or valid rotations.
Approvals MIL-DTL-5015
CONTACT SIZE AXIAL LOAD
NEWTONS LBS. NEWTONS LBS.
16 44 10 1 0.25
12 67 15 2 0.50
8 89 20 3 0.75
4 89 20 4 1.00
0 111 25 9 2.00
SEPARATION FORCE
MINIMUM
Insulation Strip Lengths (asee page 30)
Mating Life 100 cycles minimum, to MIL-DTL-5015, 3.16
Salt Spray MIL-STD-1344 Method 1001 condition B minimum (cadmium),
48 hour, olive drab chromate over cadmium, non-conductive black
alloy, conductive black alloy, green zinc, black anodized, electroless nickel
Heat +257˚F (+125˚C) for 60 hours, +185˚F (+85˚C) for 1,000 hours per
MIL-DTL-5015, 4.6.14, minimum
Chemical Resistance 20-hour full-immersion unmated in hydraulic fluid and lubricating oil
per MIL-DTL-5015 minimum
Vibration 10 to 2,000Hz (10g’s) 10 microseconds maximum discontinuity
to MIL-STD-1344 Method 2005, condition II per MIL-DTL-5015
Shock 50g 11 millisecond duration, three major axes.
10 microseconds maximum discontinuity to MIL-DTL-5015
per MIL-STD-1344 method 2004, condition A, 3.13
Contact Type Solder, crimp, PC, or thermocouple (hard silver or gold plating)
Number of Circuits 1 to 85 (aSee pages 72-82)
Contact Insertion Insertion from rear with simple hand tool. Removable, five cycles
minimum. (Solder, PC and coax outer housings are bonded into
the insulator.)
Contact Retention To MIL-DTL-5015, 4.6.6 & 3.26 and separation forces
MECHANICAL
Wire Range Sizes 24 to 0 AWG (a crimp contacts on pages 30-31)
Insulation Resistance >5000 megohms at 77°F (25°C) per MIL-DTL-5015, 3.18
Wire Sealing Range
The connector is designed for individual wire sealing. Sealing of an outer cable jacket on multiconductor
cables must be accomplished with an appropriate endbell. Sealing is only guaranteed if wires according
to MIL-W-5086 or within the listed ranges are used.
TECHNICAL
SPECIFICATIONS
CONTACT SIZE WIRE SIZE
(MIL-W-5086)
INSULATION OUTSIDE DIAMETER LIMIT
MIN. MAX.
IN. MM. IN. MM.
16 16 thru 20 .064 1.63 .130 3.30
12 12 thru 14 .114 2.90 .170 4.32
8 8 thru 10 .164 4.17 .255 6.48
4 4 thru 6 .275 6.98 .370 9.40
0 0 thru 2 .415 10.54 .550 13.97
28
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
TIP: Order connector, backshell and all accessories as one part number! See www.peigenesis.com/en/solution-guides.html
E MS Style (E/F)
Standard Clamp
2 Box Mount
No Accessory
Threads (MS3102)
PLUGS RECEPTACLES
6
Standard (MS3106)
1 Cable Mount
with Accessory
Threads (MS3101)
0 Wall Mount with
Accessory Threads
(MS3100)
6B
Box Mount
Heat Shrink Boot
aSee pages 440-441
(example)
Mates with
CREATE YOUR PART NUMBER USING THESE EIGHT STEPS
AIT 6 A A 24-21 S S -472
SERIES
PREFIX
SHELL STYLE ENDBELLS
(If omtting
endbell, enter -)
CABLE
CLAMP/BOOT
(leave blank if
not needed)
LAYOUT CONTACT ROTATION CONTACT
TYPE
PLATING
STEP 1: SELECT SHELL STYLE, PLUG OR RECEPTACLE
STEP 2: SELECT ENDBELL
RV
No Clamp
G Heat Shrink L Long Extender A Unsealed
(no grommet seal)
F Sealed
(with grommet seal)
T MS Style
(MS3108) 90º
R MS Style
Low Profile
P Potting
*Potting
Compound
aSee
Page 443
STEP 3: SELECT CABLE CLAMP OR BOOT (IF APPLICABLE)
C MS3057-C
Gland Seal
aSee Page 41
A MS3057-A
Standard Cable Clamp
9767 9767
Gland Seal for
Smaller Cable Range
aSee Page 42
STEP 12345678
U Low Cost
Shielded/Unshielded
G2 Spin Coupling
Heat Shrink
29
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
INTERNAL THREAD VERSION
EXTERNAL THREAD VERSION
CONDUIT METAL
* When using a “C” in part number, the connector is supplied
with the standard size crimp contacts for its layout. Bolded part
numbers on apage 30 indicate crimp contact. Please contact
us for connectors with reduced or enlarged crimp barrel contacts.
**aSee page 38 for post diameters and lengths.
LOW COST GLAND SEAL
GLAND SEAL
MATERIALS
(Omit for standard neoprene)
L = Low-smoke, zero-halogen
V = High-temperature Viton®
SHIELDED CABLE
STANDARD SPECIALS — CONTACT US WITH NPT THREAD SIZE, SEAL TITE CONDUIT DIAMETER, OR CABLE OUTSIDE DIAMETER.
CONDUIT PLASTIC MESH GRIP
aSee pages 445
P = Pin S = Socket
STEP 4: SELECT LAYOUT STEP 5: SELECT CONTACT
aSee pages 72-82
aSee pages 83-93 (Omit for normal)
W, X, Y, Z
STEP 6: SELECT ROTATION
S = Solder C = Crimp*
H = PC** 0 = Less Contacts
STEP 7: SELECT CONTACT TPYE
STEP 8: SELECT PLATING
CONTACTS
(Omit for silver contacts)
B30 = Gold 50µ Gold over Nickel
T = Thermocouple (solder only)
Need types with cavities and
installed and uninstalled
RDS = RADSOK (Crimp socket only)
sizes 12,8,4,0
116 = Less pre-tinned solder cups
SHELL PLATING
(Omit for olive drab chromate over cadmium)
(MS style)
023 = Electroless Nickel
(RoHS with crimp or 116 contacts)
024 = Green Zinc Cobalt
025 = Black Alloy
(RoHS with crimp or 116 contacts)
027 = Conductive Black Alloy
(RoHS with crimp or 116 contacts)
G96 = Black Anodized
472 = 116&025 mod codes (RoHS)
548 = 116&023 mod codes (RoHS)
553 = 116&027 mod codes (RoHS)
aNEED HELP? PEI engineers will help you solve your design challenges and build the perfect part for your application. Email us at
sales@peigenesis.com or complete our online Technical Request at www.peigenesis.com/technical-support. To contact us by phone,
please see the back cover for a complete listing of our branch offices and contact numbers.
30
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
PIN & SOCKET CRIMP CONTACTS
PIN CONTACT SOCKET CONTACT
CONTACT
SIZE
WIRE
SIZE
AWG
PIN CONTACT
WIRE SEALING
RANGE
INCHES (MM)
WIRE STRIP
LENGTHS
INCHES (MM)
SOCKET CONTACT
SILVER GOLD SILVER GOLD
16S 16-18-20 AIC16S-16P* AIC16S-16PG* AIC16S-16S* AIC16S-16SG*
12-14 AIC16S-12P AIC16S-12PG AIC16S-12S AIC16S-12SG C4
14-16 AIC16S-14P AIC16S-14PG AIC16S-14S AIC16S-14SG C3
18-20 AIC16S-20P AIC16S-20PG AIC16S-20S AIC16S-20SG C13
20-22 AIC16S-22P AIC16S-22PG AIC16S-22S AIC16S-22SG C14
22-24 AIC16S-24P AIC16S-24PG AIC16S-24S AIC16S-24SG C2
16 16-18-20 AIC16-16P* AIC16-16PG* AIC16-16S* AIC16-16SG*
12-14 AIC16-12P AIC16-12PG AIC16-12S AIC16-12SG C4
14-16 AIC16-14P AIC16-14PG AIC16-14S AIC16-14SG C3
18-20 AIC16-18P AIC16-18PG AIC16-18S AIC16-18SG C13
20-22 AIC16-20P AIC16-20PG AIC16-20S AIC16-20SG C14
20-24 AIC16-2024P AIC16-2024PG AIC16-2024S AIC16-2024SG C36
22-24 AIC16-22P AIC16-22PG AIC16-22S AIC16-22SG C2
12 12-14 AIC12-12P* AIC12-12PG* AIC12-12S* AIC12-12SG* .312 (7.9)
12 High-Power - - AIC12-12SRAD -
8-10 AIC12-8P AIC12-8PG AIC12-8S AIC12-8SG C5
10-12 AIC12-10P AIC12-10PG AIC12-10S AIC12-10SG C8
14-16 AIC12-14P AIC12-14PG AIC12-14S AIC12-14SG C9
16-18 AIC12-16P AIC12-16PG AIC12-16S AIC12-16SG C7
18-20 AIC12-18P AIC12-18PG AIC12-18S AIC12-18SG C6
20-22 AIC12-20P AIC12-20PG AIC12-20S AIC12-20SG C40
8 8 AIC8-8P* AIC8-8PG* AIC8-8S* AIC8-8SG*
8 High-Power - - AIC8-8SRAD -
10-12 AIC8-10P AIC8-10PG AIC8-10S AIC8-10SG C10
12-14 AIC8-12P AIC8-12PG AIC8-12S AIC8-12SG C38
4 4 AIC4-4P* AIC4-4PG* AIC4-4S* AIC4-4SG*
4 High-Power - - AIC4-4SRAD -
8 AIC4-8P AIC4-8PG AIC4-8S AIC4-8SG C15
0 0 AIC0-0P* AIC0-0PG* AIC0-0S* AIC0-0SG* .
0 High-Power - - AIC0-0SRAD -
0-2 AIC0-2P AIC0-2PG AIC0-2S AIC0-2SG C11
4 AIC0-4P AIC0-4PG AIC0-4S AIC0-4SG C12
PART NUMBER
16S
8
0.312
(7.9)
.090-.118
(2.3-3.0)
.126-.177
(3.2-4.5)
.150-.256
(3.8-6.5)
.279-.366
(7.1-9.3)
0.750
(19.0)
.394-.539
(10.0-13.7)
SOLDER THERMOCOUPLE CONTACTS
TYPE PINS SOCKETS
16S Alumel 10-040799-02P* 10-040799-02S*
Chromel 10-040799-01P* 10-040799-01S*
Iron 10-040799-03P* 10-040799-03S*
Constantan 10-040799-04P* 10-040799-04S*
16 Alumel 10-040799-12P* 10-040799-12S*
Chromel 10-040799-11P* 10-040799-11S*
Iron 10-040799-13P* 10-040799-13S*
Constantan 10-040799-14P* 10-040799-14S*
Thermocouple Types: J = Iron-Constantan K = Alumel-Chromel
T = Copper-Constantan E = Chromel-Constantan
*Bolded items are standard crimp contacts.
SOLDER THERMOCOUPLE CONTACTS
TYPE PINS SOCKETS
12 Alumel 10-040799-42P* 10-040799-42S*
Chromel 10-040799-41P* 10-040799-41S*
Iron 10-040799-43P* 10-040799-43S*
Constantan 10-040799-44P* 10-040799-44S*
16S
16
12
*Contact us for availability. Contact information is below.
16S contacts are used in 8S, 10S, 10SL, 12S, 14S & 16S connector sizes only.
0.500
(12.7)
0.563
(14.3)
0.312
(7.9)
4
0
16
WIRE STRIP
LENGTH
WIRE RANGE
12
31
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
PIN & SOCKET CRIMP CONTACTS
†† Contact us for additional tool accessories. Contact information is below.
*Contact us for availability. Contact information is below.
16S contacts are used in 8S, 10S, 10SL, 12S, 14S & 16S connector sizes only.
AF8
TH29-1 Die set, locator and
Go-No-Go gauge
400BHD
WA27F
TOOLS
ACCESSORIES
All dimensions in inches (millimeters in parenthesis)
Insert head first.
Trim excess
CONTACT
SIZE
WIRE
HOLE FILLER
COLOR
CRIMP TOOLS
CRIMP
LOCATOR &
DIE SETS
LOCATOR
COLOR
PILOT
PIN/INSERTION
GUIDE FOR
SOCKETS
INSERTION
TOOL EXTRACTION TOOL
16S
Blue
MS27488-16-3
AF8-(hand)
WA27F-
(pneumatic)
††
TH29-1
Red
10-242758-016 DAK168-16
DRK59
Kit with
Multiple Tips
16
Pin-Blue
Socket-
Green
12
Yellow
MS27488-12-3 Green 10-242758-012 DAK168-12
8Red
MS27488-8-3
400BHD
Die Set
414DA-8N
Locator
4025-Pin
4026-Socket
- 10-242758-008 DAK282
4Blue
MS27488-4-3
Die Set
414DA-4N
Locator
4043-2
- - AIC4INS AIC4EXT
0Yellow
MS27488-0-3
Die Set
414DA-0N
Locator
4042
- - AIC0INS AIC0EXT
32
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
-
--
-
-
4
8
PIN & SOCKET COAX CONTACTS
COAX
CONTACT
SIZE
COAX
WIRE
SIZE
PINS
WIRE SEALING
RANGE
INCHES (mm)
WIRE STRIP
LENGTHS
INCHES (mm)
SOCKETS
SILVER GOLD SILVER GOLD
WIRE HOLE
FILLER
MIN. MAX.
PIN CONTACT ACCESS-
ORIES
RG140/U
RG302/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
21-33060-10()
21-33060-11()
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG212/U 0.279
(7.1 mm)
0.366
(9.3 mm)
21-33034-3(1)
21-33014-3(5)
21-33016-1(3)
21-33130-3 ()
21-33064-20()
31-33060-12() 21-33059-12()
Blue
10-405996-4
0.150
(3.8 mm)
0.256
(6.5 mm)
White
10-405996-8
( ) Various platings available. Availability of coax contacts varies widely. Contact us for details. Contact information is below.
All dimensions in inches (millimeters in parenthesis)
21-33014-1(5)
21-33016-5(3)
21-33130-2()
21-33034-2(1) 21-33033-2(1)
21-33048-2()
21-33013-1(5)
21-33047-2()
21-33015-5(3)
21-33129-2()
21-33034-5(1)
21-33033-3(1)
21-33014-5(5)
21-33016-2(3)
21-33130-5()
21-33064-21()
21-33033-3(1)
21-33013-5(5)
21-33015-2(3)
21-33129-3()
21-33063-21()
21-33013-(6)
21-33047-3()
21-33129-6()
RG58C/U
RG141A/U
RG303/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG180B/U
RG195A/U
21-33034-1
21-33014-21
21-33048-1()
21-33130-1()
21-33014-22
21-33033-1
21-33013-21
21-33047-1()
21-33129-1 ()
21-33013-22
0.126
(3.2 mm)
0.177
(4.5 mm)
Yellow
10-405996-12
21-33013-3(5)
21-33015-1(3)
21-33129-3()
21-33063-20()
21-33014-6(5)
21-33048-3()
21-33130-6()
21-33033-6
21-33034-6
21-33034-8
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
21-33014-8(5)
21-33033-8
21-33130-8()
21-33013-8(5)
21-33129-8()
RG178B/U
RG196A/U
21-33059-10()
21-33059-11()
21-33013-5(5)
21-33129-4()
21-33033-4
21-33014-5(5)
21-33130-4()
21-33034-4
RG55B/U
RG142A/U
RG142B/U
RG223/U
Contact us
for details.
Contact us
for details.
Contact us
for details.
--
SOCKET CONTACT
PART NUMBER
WIRE STRIP
LENGTH
WIRE RANGE
12
-
-
Insert head
first. Trim
excess.
33
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
M22520/5-01 M22520/5-39 A
PIN & SOCKET COAX CONTACTS
TOOLS
B
M22520/10-07
M22520/10-01 B
M22520/5-45
M22520/5-01
A
M22520/10-05
M22520/10-01
B
M22520/10-07
A
B
M22520/5-01 M22520/5-45
M22520/10-01 A
M22520/10-07
RG140/U
RG302/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG212/U
RG58C/U
RG141A/U
RG303/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG180B/U
RG195A/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG178B/U
RG196A/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
A
B
11-8676-1
11-8676-2
M22520/10-05
M22520/10-01
11-8676-3
11-8676-2
11-8676-4
4
8
12
Crimp Dies
COAX
CONTACT SIZE
COAX
WIRE SIZE
HAND CRIMP TOOL CRIMP DIES USE
LOCATOR
COAX CLAMP
NUT WRENCH
All dimensions in inches (millimeters in parenthesis)
M22520/5-01 M22520/5-34 A
B
A
-
-
34
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
All dimensions in inches (millimeters in parenthesis)
DIMENSIONS
RECEPTACLE STYLES
8S .5000-28UNEF 0.562 0.110 0.594 0.875 0.120
(14.3) (2.8) (15.1) (22.2) (3.0)
10S .6250-24NEF 0.562 0.110 0.719 1.000 0.120
(14.3) (2.8) (18.3) (25.4) (3.0)
10SL .6250-24NEF 0.562 0.110 0.719 1.000 0.120
(14.3) (2.8) (18.3) (25.4) (3.0)
12S .7500-20UNEF 0.562 0.110 0.812 1.094 0.120
(14.3) (2.8) (20.6) (27.8) (3.0)
12 .7500-20UNEF 0.750 0.110 0.812 1.094 0.120
(19.1) (2.8) (20.6) (27.8) (3.0)
14S .8750-20UNEF 0.562 0.110 0.906 1.188 0.120
(14.3) (2.8) (23.0) (30.2) (3.0)
14 .8750-20UNEF 0.750 0.110 0.906 1.188 0.120
(19.1) (2.8) (23.0) (30.2) (3.0)
16S 1.0000-20UNEF 0.562 0.110 0.969 1.281 0.120
(14.3) (2.8) (24.6) (32.5) (3.0)
16 1.0000-20UNEF 0.750 0.110 0.969 1.281 0.120
(19.1) (2.8) (24.6) (32.5) (3.0)
18 1.1250-18NEF 0.750 0.141 1.062 1.375 0.120
(19.1) (3.6) (27.0) (34.9) (3.0)
20 1.2500-18NEF 0.750 0.141 1.156 1.500 0.120
(19.1) (3.6) (29.4) (38.1) (3.0)
22 1.3750-18NEF 0.750 0.141 1.250 1.625 0.120
(19.1) (3.6) (31.8) (41.3) (3.0)
24 1.5000-18NEF 0.812 0.141 1.375 1.750 0.147
(20.6) (3.6) (34.9) (44.5) (3.7)
28 1.7500-18NS 0.812 0.141 1.562 2.000 0.147
(20.6) (3.6) (39.7) (50.8) (3.7)
32 2.0000-18NS 0.875 0.156 1.750 2.250 0.173
(22.2) (4.0) (44.5) (57.2) (4.4)
36 2.2500-16UN 0.875 0.156 1.938 2.500 0.173
(22.2) (4.0) (49.2) (63.5) (4.4)
40 2.5000-16UN 0.875 0.156 2.188 2.750 0.173
(22.2) (4.0) (55.6) (69.9) (4.4)
M T DIA.
SHELL A THREAD +.010 R S +.004
SIZE CLASS 2A -.000 P REF. +/-.005 +/-.031 -.002
0.969 0.375
(24.6) (9.5)
0.969 0.500
(24.6) (12.7)
0.969 0.625
(24.6) (15.9)
0.969 0.625
(24.6) (15.9)
1.344 0.625
(34.1) (15.9)
0.969 0.750
(24.6) (19.1)
1.344 0.750
(34.1) (19.1)
0.969 0.875
(24.6) (22.2)
1.344 0.875
(34.1) (22.2)
1.344 1.000
(34.1) (25.4)
1.344 1.125
(34.1) (28.6)
1.344 1.250
(34.1) (31.8)
1.406 1.375
(35.7) (34.9)
1.406 1.625
(35.7) (41.3)
1.469 1.875
(37.3) (47.6)
1.469 2.062
(37.3) (52.4)
1.469 2.312
(37.3) (58.7)
1.087 0.532
(27.6) (13.5)
1.087 0.628
(27.6) (16.0)
1.087 0.755
(27.6) (19.2)
1.087 0.755
(27.6) (19.2)
1.334 0.755
(33.9) (19.2)
1.087 0.882
(27.6) (22.4)
1.334 0.882
(33.9) (22.4)
1.087 1.010
(27.6) (25.7)
1.334 1.010
(33.9) (25.7)
1.334 1.137
(33.9) (28.9)
1.334 1.264
(33.9) (32.1)
1.334 1.392
(33.9) (35.4)
1.406 1.519
(35.7) (38.6)
1.406 1.774
(35.7) (45.1)
1.469 1.996
(37.3) (50.7)
1.469 2.251
(37.3) (57.2)
1.469 2.506
(37.3) (63.7)
.5000-28UNEF
.5000-28UNEF
.6250-24UNEF
.6250-24UNEF
.6250-24UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1250-18UNEF
1.2500-18UNEF
1.3750-18UNEF
1.6250-18UNEF
1.8750-16UN
2.0625-16UN
2.3125-16UN
AIT0-MS3100/AIT2-MS3102 AIT2-MS3102 AIT0/AIT1 AIT1 AIT0/AIT1
AIT0-MS3100
AIT2-MS3102
AIT0-MS3100
AIT2-MS3102
AIT1-MS3101
AIT1-MS3101
L REF KK DIA.
LENGTH +.010
-.000
LENGTH
3100
3101 Q DIA.
B THREAD
CLASS 2A
35
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DIMENSIONS
ENDBELL STYLES
A
L
3
XX
H
L4
R 
(MS-R)
E
(MS-E/F)
8S 1.390 3.20 .5000-28UNEF
(35.3) (81.20)
10S 1.468 3.20 .5000-28UNEF
(37.3) (81.20)
10SL 1.468 3.23 .6250-24NEF
(37.3) (93.6)
12S 1.468 3.58 .6250-24NEF
(37.3) -
12 1.843 3.66 .6250-24NEF
(46.8) -
14S 1.468 3.23 .7500-20UNEF
(37.3) (82.09)
14 1.843 3.64 .7500-20UNEF
(46.8) -
16S 1.468 3.23 .8750-20UNEF
(37.3) (82.09)
16 1.843 3.58 .8750-20UNEF
(46.8) (91.03)
18 1.938 3.66 1.000-20UNEF
(49.2) (92.94)
20 1.844 3.64 1.1875-18NEF
(46.8) (92.56)
22 1.938 3.65 1.1875-18NEF
(49.2) (92.68)
24 1.969 3.73 1.4375-18NEF
(50.0) (94.64)
28 2.188 3.90 1.4375-18NEF
(55.6) (98.96)
32 2.157 4.10 1.7500-18NS
(54.8) (104.24)
36 2.219 4.15 2.0000-18NS
(56.4) (105.38)
40 2.188 4.15 2.2500-16UN
(55.6) (105.38)
- -
- -
- -
- -
2.129 0.281
(54.1) (7.1)
2.129 0.281
(54.1) (7.1)
2.129 0.281
(54.1) (7.1)
2.201 0.406
(55.9) (10.3)
2.524 0.406
(62.1) (10.3)
2.201 0.500
(55.9) (12.7)
2.524 0.500
(62.1) (12.7)
2.596 0.531
(65.9) (13.5)
2.654 0.656
(67.4) (16.7)
2.654 0.740
(67.4) (18.8)
2.885 0.781
(73.3) (19.8)
2.885 0.922
(73.3) (23.4)
2.943 1.156
(74.8) (29.4)
2.943 1.250
(74.8) (31.8)
3.068 1.562
(77.9) (39.7)
1.588 0.959
(40.3) (24.4)
1.588 1.026
(40.3) (26.1)
1.588 1.120
(40.3) (28.4)
1.588 1.120
(40.3) (28.4)
1.931 1.120
(49.0) (28.4)
1.588 1.307
(40.3) (33.2)
1.931 1.307
(49.0) (33.2)
1.588 1.432
(40.3) (36.4)
1.931 1.432
(49.0) (36.4)
1.931 1.557
(49.0) (39.5)
1.931 1.744
(49.0) (44.3)
1.931 1.869
(49.0) (47.5)
2.009 1.994
(51.0) (50.6)
2.009 2.166
(51.0) (55.0)
2.072 2.541
(52.6) (64.5)
2.072 2.729
(52.6) (69.3)
2.072 2.979
(52.6) (75.7)
- - - - - -
- - - - - -
- - - - - -
- - - - - -
1.969 0.138 0.461 0.303 0.524 0.610
(50.0) (3.5) (11.7) (7.7) (13.3) (15.5)
- - - - - -
- - - - - -
- - - - - -
- - - - - -
1.969 0.138 0.461 0.417 0.669 0.752
(50.0) (3.5) (11.7) (10.6) (17.0) (19.1)
- - - - - -
- - - - - -
1.969 0.138 0.461 0.531 0.862 0.941
(50.0) (3.5) (11.7) (13.5) (21.9) (23.9)
2.362 0.138 0.453 0.531 0.862 0.941
(60.0) (3.5) (11.5) (13.5) (21.9) (23.9)
2.362 0.138 0.453 0.575 0.862 0.941
(60.0) (3.5) (11.5) (14.5) (21.9) (23.9)
2.559 0.138 0.500 0.736 1.031 1.165
(65.0) (3.5) (12.7) (18.7) (26.2) (29.6)
2.559 0.138 0.500 0.819 1.031 1.165
(65.0) (3.5) (12.7) (20.8) (26.2) (29.6)
2.559 0.138 0.500 0.969 1.358 1.488
(65.0) (3.5) (12.7) (24.6) (34.5) (37.8)
2.559 0.138 0.500 1.063 1.358 1.488
(65.0) (3.5) (12.7) (27.0) (34.5) (37.8)
2.756 0.138 0.598 1.311 1.717 1.882
(70.0) (3.5) (15.2) (33.3) (43.6) (47.8)
3.150 0.138 0.598 1.516 1.717 1.882
(80.0) (3.5) (15.2) (38.5) (43.6) (47.8)
3.150 0.138 0.610 1.898 2.070 2.276
(80.0) (3.5) (15.5) (48.2) (52.6) (57.8)
AIT0-MS3100/AIT1-MS3101 AIT0/AIT1 G
All dimensions in inches (millimeters in parenthesis)
L G
A & L ENDBELL E ENDBELL R ENDBELL
L1 L2
MAX.
B THREAD
CLASS 2A
LXX CABLE
MIN.
LH DIA
MAX.
L
MAX.
J
± .008
(±0.2)
K
± .020
(+0.5)
Z
MIN.
BB
MAX.
JJ
+.008
(+.02)
SHELL
SIZE
36
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
DIMENSIONS
All dimensions in inches (millimeters in parenthesis)
STYLE 6 PLUGS (BARREL ASSEMBLY)
A
MSEeb
E
MS3106E
MS3106F
8S .5000-28UNEF 0.741 .5000-28UNEF
(18.8)
10S .6250-24NEF 0.869 .5000-28UNEF
(22.1)
10SL .6250-24NEF 0.946 .6250-24UNEF
(24.0)
12S .7500-20UNEF 0.995 .6250-24UNEF
(25.3)
12 .7500-20UNEF 0.995 .6250-24UNEF
(25.3)
14S .8750-20UNEF 1.123 .7500-20UNEF
(28.5)
14 .8750-20UNEF 1.123 .7500-20UNEF
(28.5)
16S 1.0000-20UNEF 1.250 .8750-20UNEF
(31.8)
16 1.0000-20UNEF 1.250 .8750-20UNEF
(31.8)
18 1.1250-18NEF 1.333 1.0000-20UNEF
(33.9)
20 1.2500-18NEF 1.461 1.1250-18UNEF
(37.1)
22 1.3750-18NEF 1.588 1.2500-18UNEF
(40.3)
24 1.5000-18NEF 1.715 1.3750-18UNEF
(43.6)
28 1.7500-18NS 1.968 1.6250-18UNEF
(50.0)
32 2.0000-18NS 2.209 1.8750-16UN
(56.1)
36 2.2500-16UN 2.463 2.0625-16UN
(62.6)
40 2.5000-16UN 2.719 2.3125-16UN
(69.1)
1.390 - .5000-28UNEF
(35.3) -
1.468 - .5000-28UNEF
(37.3) -
1.468 3.684 .6250-24NEF
(37.3) (93.6)
1.468 - .6250-24NEF
(37.3) -
1.843 - .6250-24NEF
(46.8) -
1.468 3.748 .7500-20UNEF
(37.3) (95.2)
1.843 - .7500-20UNEF
(46.8) -
1.468 3.748 .8750-20UNEF
(37.3) (95.2)
1.843 3.710 .8750-20UNEF
(46.8) (94.2)
1.938 4.094 1.0000-20UNEF
(49.2) (104.0)
1.844 4.094 1.1875-18NEF
(46.8) (104.0)
1.938 4.102 1.1875-18NEF
(49.2) (104.2)
1.970 3.950 1.4375-18NEF
(50.0) (100.4)
2.189 4.392 1.4375-18NEF
(55.6) (111.6)
2.158 5.038 1.7500-18NS
(54.8) (128.0)
2.219 4.354 2.0000-18NS
(56.4) (100.6)
2.188 4.354 2.2500-16UN
(55.6) (110.6)
--- ---
--- ---
--- ---
--- ---
2.129 0.281
(54.1) (7.1)
2.129 0.281
(54.1) (7.1)
2.129 0.281
(54.1) (7.1)
2.201 0.406
(55.9) (10.3)
2.524 0.406
(64.1) (10.3)
2.201 0.500
(55.9) (12.7)
2.524 0.500
(64.1) (12.7)
2.596 0.531
(65.9) (13.5)
2.654 0.656
(67.4) (16.7)
2.654 0.740
(67.4) (18.8)
2.885 0.781
(73.3) (19.8)
2.885 0.922
(73.3) (23.4)
2.943 1.156
(74.8) (29.4)
2.943 1.250
(74.8) (31.8)
3.068 1.562
(77.9) (39.7)
Q1 BARREL
SHELL A THREAD DIA. B THREAD
SIZE CLASS 2B MAX. CLASS 2A
B THREAD
L1 L2 CLASS 2A
CABLE
L MAX. MIN. XX
AIT6-MS3106
MS3108
MS3106E/MS3106F
STYLE 6 ENDBELLS
A & L
L
37
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DIMENSIONS
STYLE 6 RIGHT ANGLE ENDBELLS
All dimensions in inches (millimeters in parenthesis)
G
L
MSRebSIDE
H
T
MS3108A
MS3108E
R 
MS3106R
8S 1.588 0.959
(40.3) (24.4)
10S 1.588 1.026
(40.3) (26.1)
10SL 1.588 1.120
(40.3) (28.4)
12S 1.588 1.120
(40.3) (28.4)
12 1.931 1.120
(49.0) (28.4)
14S 1.588 1.307
(40.3) (33.2)
14 1.931 1.307
(49.0) (33.2)
16S 1.588 1.432
(40.3) (36.4)
16 1.931 1.432
(49.0) (36.4)
18 1.931 1.557
(49.0) (39.5)
20 1.931 1.744
(49.0) (44.3)
22 1.931 1.869
(49.0) (47.5)
24 2.009 1.994
(51.0) (50.6)
28 2.009 2.166
(51.0) (55.0)
32 2.072 2.541
(52.6) (64.5)
36 2.072 2.729
(52.6) (69.3)
40 2.072 2.979
(52.6) (75.7)
- - - - - -
- - - - - -
- - - - - -
- - - - - -
1.969 0.138 0.461 0.303 0.524 0.610
(50.0) (3.5) (11.7) (7.7) (13.3) (15.5)
- - - - - -
- - - - - -
- - - - - -
- - - - - -
1.969 0.138 0.461 0.417 0.669 0.752
(50.0) (3.5) (11.7) (10.6) (17.0) (19.1)
- - - - - -
- - - - - -
1.969 0.138 0.461 0.531 0.862 0.941
(50.0) (3.5) (11.7) (13.5) (21.9) (23.9)
2.362 0.138 0.453 0.531 0.862 0.941
(60.0) (3.5) (11.5) (13.5) (21.9) (23.9)
2.362 0.138 0.453 0.575 0.862 0.941
(60.0) (3.5) (11.5) (14.5) (21.9) (23.9)
2.559 0.138 0.500 0.736 1.031 1.165
(65.0) (3.5) (12.7) (18.7) (26.2) (29.6)
2.559 0.138 0.500 0.819 1.031 1.165
(65.0) (3.5) (12.7) (20.8) (26.2) (29.6)
2.559 0.138 0.500 0.969 1.358 1.488
(65.0) (3.5) (12.7) (24.6) (34.5) (37.8)
2.559 0.138 0.500 1.063 1.358 1.488
(65.0) (3.5) (12.7) (27.0) (34.5) (37.8)
2.756 0.138 0.598 1.311 1.717 1.882
(70.0) (3.5) (15.2) (33.3) (43.6) (47.8)
3.150 0.138 0.598 1.516 1.717 1.882
(80.0) (3.5) (15.2) (38.5) (43.6) (47.8)
3.150 0.138 0.610 1.898 2.070 2.276
(80.0) (3.5) (15.5) (48.2) (52.6) (57.8)
1.427 .5000-28UNEF
(36.2)
1.458 .5000-28UNEF
(37.0)
1.482 .6250-24NEF
(37.6)
1.487 .6250-24NEF
(37.8)
1.862 .6250-24NEF
(47.3)
1.651 .7500-20UNEF
(41.9)
1.926 .7500-20UNEF
(48.9)
1.677 .8750-20UNEF
(42.6)
2.051 .8750-20UNEF
(52.1)
2.114 1.0000-20UNEF
(53.7)
2.364 1.1875-18NEF
(60.0)
2.364 1.1875-18NEF
(60.0)
2.615 1.4375-18NEF
(66.4)
2.615 1.4375-18NEF
(66.4)
2.837 1.7500-18NS
(72.1)
2.895 2.0000-18NS
(73.5)
3.020 2.2500-16UN
(76.7)
SHELL H DIA.
SIZE L MAX. MAX.
J ± .008 K +.020 Z BB JJ +.008
L MAX. (±0.2) (+0.5) MIN. MAX. (+0.2)
B THREAD
L MAX. CLASS 2A
RG 3108
38
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
DIMENSIONS
All dimensions in inches (millimeters in parenthesis)
PRINTED CIRCUIT CONTACTS
USE AIT OR M T DIA. KK DIA.
SHELL AMPHENOL A THREAD +.010 P R (TP) S +.004 3102 +.010 Y REF.
SIZE PART NUMBER CLASS 2A -.000 REF. +/-.005 +/- .031 -.002 REF. L -.000 X REF. +/-.045
8S 10-602460-XXX .5000-28UNEF 0.562 0.110 0.594 0.875 0.120 0.969 0.375 0.595 0.188
(14.3) (2.8) (15.1) (22.2) (3.0) (24.6) (9.5) (15.1) (4.8)
10S 10-602461-XXX .6250-24NEF 0.562 0.110 0.719 1.000 0.120 0.969 0.500 0.595 0.188
(14.3) (2.8) (18.3) (25.4) (3.0) (24.6) (12.7) (15.1) (4.8)
10SL 10-602462-XXX .6250-24NEF 0.562 0.110 0.719 1.000 0.120 0.969 0.625 0.595 0.188
(14.3) (2.8) (18.3) (25.4) (3.0) (24.6) (15.9) (15.1) (4.8)
12S 10-602463-XXX .7500-20UNEF 0.562 0.110 0.812 1.094 0.120 0.969 0.625 0.595 0.188
(14.3) (2.8) (20.6) (27.8) (3.0) (24.6) (15.9) (15.1) (4.8)
12 10-602464-XXX .7500-20UNEF 0.750 0.110 0.812 1.094 0.120 1.344 0.625 0.782 0.188
(19.1) (2.8) (20.6) (27.8) (3.0) (34.1) (15.9) (19.9) (4.8)
14S 10-602465-XXX .8750-20UNEF 0.562 0.110 0.906 1.188 0.120 0.969 0.750 0.595 0.188
(14.3) (2.8) (23.0) (30.2) (3.0) (24.6) (19.1) (15.1) (4.8)
14 10-602466-XXX .8750-20UNEF 0.750 0.110 0.906 1.188 0.120 1.344 0.750 0.782 0.188
(19.1) (2.8) (23.0) (30.2) (3.0) (34.1) (19.1) (19.9) (4.8)
16S 10-602467-XXX 1.0000-20UNEF 0.562 0.110 0.969 1.281 0.120 0.969 0.875 0.595 0.188
(14.3) (2.8) (24.6) (32.5) (3.0) (24.6) (22.2) (15.1) (4.8)
16 10-602468-XXX 1.0000-20UNEF 0.750 0.110 0.969 1.281 0.120 1.344 0.875 0.782 0.188
(19.1) (2.8) (24.6) (32.5) (3.0) (34.1) (22.2) (19.9) (4.8)
18 10-602469-XXX 1.1250-18NEF 0.750 0.141 1.062 1.375 0.120 1.344 1.000 0.782 0.188
(19.1) (3.6) (27.0) (34.9) (3.0) (34.1) (25.4) (19.9) (4.8)
20 10-602470-XXX 1.2500-18NEF 0.750 0.141 1.156 1.500 0.120 1.344 1.125 0.782 0.188
(19.1) (3.6) (29.4) (38.1) (3.0) (34.1) (28.6) (19.9) (4.8)
22 10-602471-XXX 1.3750-18NEF 0.750 0.141 1.250 1.625 0.120 1.344 1.250 0.782 0.188
(19.1) (3.6) (31.8) (41.3) (3.0) (34.1) (31.8) (19.9) (4.8)
24 10-602472-XXX 1.5000-18NEF 0.812 0.141 1.375 1.750 0.147 1.406 1.375 0.782 0.188
(20.6) (3.6) (34.9) (44.5) (3.7) (35.7) (34.9) (19.9) (4.8)
28 10-602473-XXX 1.7500-18NS 0.812 0.141 1.562 2.000 0.147 1.406 1.625 0.782 0.188
(20.6) (3.6) (39.7) (50.8) (3.7) (35.7) (41.3) (19.9) (4.8)
32 10-602474-XXX 2.0000-18NS 0.875 0.156 1.750 2.250 0.173 1.469 1.875 0.782 0.188
(22.2) (4.0) (44.5) (57.2) (4.4) (37.3) (47.6) (19.9) (4.8)
36 10-602475-XXX 2.2500-16UN 0.875 0.156 1.938 2.500 0.173 1.469 2.062 0.782 0.188
(22.2) (4.0) (49.2) (63.5) (4.4) (37.3) (52.4) (19.9) (4.8)
40 10-602476-XXX 2.5000-16UN 0.875 0.156 2.188 2.750 0.173 1.469 2.312 0.782 0.188
(22.2) (4.0) (55.6) (69.9) (4.4) (37.3) (58.7) (19.9) (4.8)
XXX = Insert layout code. Contact us for correct code. Contact information is below.
39
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
All dimensions in inches (millimeters in parenthesis)
8S 0.594 (15.1) 0.134 (3.4) 0.396 (10.1) 0.603 (15.4)
10S 0.717 (18.2) 0.134 (3.4) 0.525 (13.3) 0.728 (18.5)
10SL 0.717 (18.2) 0.134 (3.4) 0.646 (16.4) 0.728 (18.5)
12S/12 0.811 (20.6) 0.134 (3.4) 0.646 (16.4) 0.854 (21.7)
14S/14 0.906 (23.0) 0.134 (3.4) 0.776 (19.7) 0.980 (24.9)
16S/16 0.969 (24.6) 0.134 (3.4) 0.902 (22.9) 1.091 (27.7)
18 1.063 (27.0) 0.134 (3.4) 1.028 (26.1) 1.224 (31.1)
20 1.157 (29.4) 0.134 (3.4) 1.161 (29.5) 1.358 (34.5)
22 1.252 (31.8) 0.134 (3.4) 1.287 (32.7) 1.488 (37.8)
24 1.374 (34.9) 0.154 (3.9) 1.417 (36.0) 1.626 (41.3)
28 1.563 (39.7) 0.154 (3.9) 1.654 (42.0) 1.854 (47.1)
32 1.752 (44.5) 0.177 (4.5) 1.902 (48.3) 2.118 (53.8)
36 1.937 (49.2) 0.177 (4.5) 2.150 (54.6) 2.362 (60.0)
40 2.185 (55.5) 0.177 (4.5) 2.409 (61.2) 2.610 (66.3)
DIMENSIONS
PANEL CUTOUTS
PANEL THICKNESS
Dimension J is flange in
front of panel. Dimension K
is flange at rear of panel.
See sealing screws on
apage 439.
++ 6B panel plug is front mount only.
Rear MountFront Mount
Max screwhead Max screwhead &
panel thickness
MOUNTING HOLE FRONT MOUNT REAR MOUNT
DIAMETER
FLANGE STYLE 0-2-6B
G H J K
SHELL
SIZE
SHELL SIZE FRONT MOUNT REAR MOUNT
8SL
.125 (3.18)
.125 (3.18)
10S .125 (3.18)
10SL .125 (3.18)
12S/12SL .125 (3.18)
12 .187 (4.75)
14S .187 (4.75)
16S .187 (4.75)
16 .187 (4.75)
18 .187 (4.75)
20 .187 (4.75)
22 .187 (4.75)
24 .187 (4.75)
28 .187 (4.75)
32 .250 (6.35)
36 .250 (6.35)
40 .250 (6.35)
40 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
CURRENT RATING (AMPS)
13A 23A 46A
CONTACT SIZE
16 12 8
FIRST-MATE, LAST-BREAK (FMLB) CONNECTOR THAT
INTERMATES WITH MIL-DTL-5015
Amphenol’s DL Pre-Earth /FMLB (first-mate, last-break) connectors are designed
for applications where a protective circuit from the ground contact to the shell is a
safety requirement. These connectors provide a path for stray voltage to be shunted
to a safe ground to avoid damage to sensitive equipment or harm to operators.
Intermateable with AIT, MIL-DTL-5015 & 97 series
UL-listed
Conformity with European (CE) safety standards
(DIN VDE 0627 and certified through TUV Product
Service GmbH) in the approved insert arrangement
Offered in shell styles: 3102A box mount
and 3106A straight plug
Intermateable with AIT, MIL-DTL-5015
and 97 styles
Class IP67 protection when mated
UL-listed file # E202200
Pre-earth (ground contact) design
First-mate/last-break capability
Pre-Earth Series/FMLB
MATING VIEW
OF PIN INSERT
TOTAL
CONTACTS
Indicates Pre-Earth contact only *Pre-Earth contact in plug
24-10 7 - - 7
24-106* 7 - - 7
22-22 4 - - 4
20-15 7 - 7 -
18-12 6 6 - -
18-10 4 - 4 -
LAYOUT
A
B
C
A
BC
D
A
B
C
D
E
F
A
B
CD
EG
F
A
BC
D
A
B
CD
E
F
G
A
B
CD
E
F
G
AIT/MS AMPHENOL INDUSTRIAL THREADED/MS/MIL-DTL-5015 SERIES
FEATURES
(example)
CREATE YOUR PART NUMBER USING THESE THREE STEPS
DL3106A 18-10 S
CONNECTOR
TYPE
LAYOUT CONTACT
P = Pin S = Socket
STEP 1: SELECT SHELL STYLE
STEP 3: SELECT CONTACT
PLUGS RECEPTACLES
DL3102A
Box Mount Receptacle
DL3106A
Plug
STEP 2: SELECT LAYOUT
1 2 3
10SL-3 3 3 - -
APPLICATIONS Power generators
Engines
Sensors
Motion control
Off-road vehicles
Earth-moving equipment
Ships
Mobile equipment
Industrial machinery
Telecommunications
41
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
ACCESSORIES
MS3057-A CABLE CLAMP
MS3057-C WATERPROOF CABLE CLAMP
Standard MS3057-C waterproof cable clamp with mechanical strain relief for use
with threaded endbells. Internal neoprene gland and compression ring will seal
a broad range of round cable diameters, as listed below. For reduction of cable
diameters, order the appropriate MS3420A bushing in table.
8S/10S MS3057-3C 0.219 (5.56) 0.095 (2.41) MS3420-3A 0.125 (3.17)
10SL/12S/12 MS3057-4C 0.312 (7.93) 0.188 (4.80) MS3420-4A 0.219 (5.56)
12SL/14S MS3057-6C 0.438 (11.12) 0.281 (7.10) MS3420-6A 0.312 (7.93)
MS3420-4A 0.219 (5.56)
16/16S MS3057-8C 0.530 (13.48) 0.312 (7.90) MS3420-8A 0.438 (11.1)
MS3420-6A 0.312 (7.93)
18 MS3057-10C 0.625 (15.87) 0.375 (9.50) MS3420-10A 0.438 (11.1)
MS3420-6A 0.312 (7.93)
20/22 MS3057-12C 0.750 (19.00) 0.500 (12.70) MS3420-12A 0.540 (13.74)
MS3420-8A 0.438 (11.10)
24/28 MS3057-16C 0.940 (23.80) 0.625 (15.90) MS3420-16A 0.750 (19.00)
MS3420-12A 0.540 (13.74)
MS3420-8A 0.438 (11.10)
32 MS3057-20C 1.250 (31.75) 0.921 (23.40) MS3420-20A 0.938 (23.8)
MS3420-16A 0.750 (19.00)
MS3420-12A 0.540 (13.74)
36 MS3057-24C 1.380 (35.00) 1.00 (25.40) MS3420-24A 1.12 (28.50)
MS3420-18A 0.938 (23.80)
MS3420-16A 0.750 (19.00)
40 MS3057-28C 1.620 (41.25) 1.25 (31.80) MS3420-28A 1.25 (31.75)
MS3420-20A 0.940 (23.80)
MS3420-16A 0.750 (19.00)
Standard MS3057 cable clamps have dual-clamping action to provide a balanced, positive hold on the wires
and greatly reduce moisture transmission. This cable clamp accepts MS3420 bushings. MS3420 bushings can
be nested to reduce the inside diameter (ID) to more closely match the diameter of the cable or wire bundle.
STANDARD CLAMP & TELESCOPIC BUSHING
LOW-COST
ZINC WITH BUSHING BUSHING ID
BUSHING INCLUDED INCH (MM)
- MS3420-3 0.130 (3.3)
97-3057-1004-1 MS3420-4 0.220 (5.6)
97-3057-1004-1 MS3420-4 0.220 (5.6)
97-3057-1007-1 MS3420-6 0.312 (7.9)
97-3057-1008-1 MS3420-8 0.437 (11.1)
97-3057-1010-1 MS3420-10 0.562 (14.3)
97-3057-1012-1 MS3420-12 0.625 (15.9)
97-3057-1016-1 MS3420-16, -12 0.625 (15.9)
97-3057-1020-1 MS3420-20, -16 0.750 (19.1)
97-3057-1024-1 MS3420-24, -20 0.937 (23.8)
- - -
All dimensions in inches (millimeters in parenthesis)
STANDARD CLAMP
ALUMINUM W/ MAXIMUM
SHELL THREAD LOW-COST ALUMINUM W/ STAINLESS STEEL CABLE DIAMETER
SIZE CLASS 2B CAST ZINC BRASS SCREWS SCREWS INCH (MM)
8S/10S 1/2-28UNEF - MS3057-3A M85049/41-3A 0.250 (6.35)
10SL 5/8-24UNEF 97-3057-1004** MS3057-4A M85049/41-4A 0.312 (7.92)
12/12S 5/8-24UNEF 97-3057-1004** MS3057-4A M85049/41-4A 0.312 (7.92)
12SL/14S 3/4-20UNEF 97-3057-1007** MS3057-6A M85049/41-6A 0.438 (11.10)
16/16S 7/8-20UNEF 97-3057-1008** MS3057-8A M85049/41-8A 0.562 (14.27)
18 1-20UNEF 97-3057-1010** MS3057-10A M85049/41-10A 0.625 (15.88)
20/22 1 3/16-18UNEF 97-3057-1012** MS3057-12A M85049/41-12A 0.750 (19.05)
24/28 1 7/16-18UNEF 97-3057-1016** MS3057-16A M85049/41-16A 0.938 (23.80)
32 1 3/4-18UNS 97-3057-1020** MS3057-20A M85049/41-20A 1.250 (31.75)
36 2-18UNS 97-3057-1024** MS3057-24A M85049/41-24A 1.375 (34.92)
40 2 1/4UNS-16 - MS3057-28A M85049/41-28A 1.625 (41.28)
SHELL WIRE DIAMETER INCHES (MM) OPTIONAL BUSHINGS
SIZE PART NUMBER MAX. MIN. PART NUMBER MAX. WIRE DIA. (MM)
Default plating is CAD OD.
** Other platings are available. aSee page 17.
42
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
ACCESSORIES
9767 CABLE CLAMPS
For use with style-A cable clamps and AIT/MS style-E/F endbells to resist dust,
dirt, and oil. Bushings can be nested, one inside the other, to reduce the inside
diameter to better seal against the cable jacket. Each bushing will accept the next
smallest bushing.
MS3420 TELESCOPING BUSHINGS
9767 waterproof cable clamp with mechanical strain relief. An internal Neoprene gland seal bushing and
compression washer will seal a broad range of round cable diameters as listed below.
For use with MS3057-C cable clamps (style-C) to reduce the wire-sealing
diameter. Bushings can be nested, one inside the other, to progressively
reduce the inside diameter of the cable clamp. The column labeled “re duction
bushings” shows the acceptable nesting options for each clamp.
MS3420-A REDUCTION BUSHINGS
8S/10S MS3420-3 0.130 (3.30) NONE - MS3057-3A
10SL/12/12S MS3420-4 0.220 (5.59) NONE - MS3057-4A
14/14S MS3420-6 0.312 (7.92) NONE - MS3057-6A
16S MS3420-8 0.437 (11.10) NONE - MS3057-8A
16 MS3420-8 0.437 (11.10) NONE - MS3057-8A
18 MS3420-10 0.562 (14.30) NONE - MS3057-10A
20 MS3420-12 0.625 (15.90) NONE - MS3057-12A
22 MS3420-12 0.625 (15.90) NONE - MS3057-12A
24 MS3420-16 0.750 (19.05) MS3420-12 0.625 (15.90) MS3057-16A
28 MS3420-16 0.750 (19.05) MS3420-12 0.625 (15.90) MS3057-16A
32 MS3420-20 0.937 (23.80) MS3420-16 0.750 (19.05) MS3057-20A
36 MS3420-24 1.250 (31.75) MS3420-20 0.937 (23.80) MS3057-24A
40 MS3420-28 1.375 (34.92) MS3420-24 1.250 (31.75) SE96-28A4
10SL/12S/12 9767-12-4 0.219 5.55 0.100 0.51 5/8-24
14S 9767-14-4 0.219 5.55 0.100 0.51 3/4-20
14S 9767-14-6 0.344 8.73 0.176 4.47 3/4-20
16S/16 9767-16-4 0.219 5.55 0.100 0.51 7/8-20
16S/16 9767-16-6 0.344 8.73 0.176 4.47 7/8-20
16S/16 9767-16-8 0.438 11.12 0.177 4.50 7/8-20
18 9767-18-6 0.344 8.73 0.176 4.47 1-20
18 9767-18-8 0.438 11.12 0.177 4.50 1-20
18 9767-18-10 0.563 14.29 0.292 7.42 1-20
20/22 9767-22-8 0.438 11.12 0.177 4.50 1-3/16-18
20/22 9767-22-10 0.563 14.29 0.292 7.42 1-3/16-18
20/22 9767-22-12 0.688 17.46 0.370 9.40 1-3/16-18
24/28 9767-28-10 0.563 14.29 0.292 7.42 1-7/16-18
24/28 9767-28-12 0.688 17.46 0.370 9.40 1-7/16-18
24/28 9767-28-16 0.844 21.43 0.536 13.61 1-7/16-18
32 9767-32-20 1.031 26.19 0.590 14.99 1-3/4-18UNS
36 9767-36-16 0.844 21.43 0.536 13.61 2-18UNS
All dimensions in inches (millimeters in parenthesis)
SHELL
SIZE
1ST BUSHING
PART NUMBER
INSIDE
DIAMETER
2ND NESTED BUSHING
INSIDE
DIAMETER FITS IN CABLE CLAMP
SHELL SIZE
INCHES MM MMINCHES
CABLE CLAMP
PART NUMBER
MAX. CABLE OUTSIDE DIAMETER MIN. CABLE OUTSIDE DIAMETER THREAD
CLASS 2B UNEF
43
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
Metal dust caps are used to protect the contacts when the connectors are left unmated. Dust caps
come with metal chain lanyards. Dummy receptacles are for front or rear panel mounting. The center
of the dummy receptacle is closed. Dummy receptacles mount on the same centers and have the
same outside dimensions as MS3102 receptacles. A version with a clearance hole through the
middle of the connector is also available. Call for ordering information; contact information is below.
ACCESSORIES
Synthetic rubber gaskets are used to ensure a moisture-tight seal between a receptacle and the panel.
Gaskets are available for front or rear panel mounting of style-0, 2, and 6B connectors. Gasket thickness
is approximately .031 inches (1 mm), for nonconductive and low-temperature types.
Conductive shielding gaskets contain an imbedded metal screen for EMI/RFI shielding in addition to
moisture sealing. Gaskets are available for front or rear panel mounting of connectors. Gasket thickness
is .020 inches (.5 mm).
GASKETS
SHELL SIZE NON-CONDUCTIVE CONDUCTIVE LOW-TEMPERATURE
-67ºF (-55ºC)
8S 10-040450-008 10-040450-08S 10-036675-008
10S/10SL 10-040450-010 10-040450-10S 10-036675-010
12/12S 10-040450-012 10-040450-12S 10-036675-012
14/14S 10-040450-014 10-040450-14S 10-036675-014
16S 10-040450-016 10-040450-16S 10-036675-016
16 10-040450-016 10-040450-16S 10-036675-016
18 10-040450-018 10-040450-18S 10-036675-018
20 10-040450-020 10-040450-20S 10-036675-020
22 10-040450-022 10-040450-22S 10-036675-022
24 10-040450-024 10-040450-24S 10-036675-024
28 10-040450-028 10-040450-28S 10-036675-028
32 10-040450-032 10-040450-32S 10-036675-032
36 10-040450-036 10-040450-36S 10-036675-036
40 10-040450-040 10-040450-40S 10-036675-040
METAL DUST CAPS WITH SASH CHAIN & DUMMY RECEPTACLES
8S MS25042-8* MS25043-8* MS3105-8S
10S/10SL MS25042-10* MS25043-10* MS3105-10S
12/12S/12SL MS25042-12* MS25043-12* MS3105-12S
14S MS25042-14* MS25043-14* MS3105-14S
16S MS25042-16* MS25043-16* MS3105-16S
16 MS25042-16* MS25043-16* MS3105-16
18 MS25042-18* MS25043-18* MS3105-18
20 MS25042-20* MS25043-20* MS3105-20
22 MS25042-22* MS25043-22* MS3105-22
24 MS25042-24* MS25043-24* MS3105-24
28 MS25042-28* MS25043-28* MS3105-28
32 MS25042-32* MS25043-32* MS3105-32
36 MS25042-36* MS25043-36* MS3105-36
40 MS25042-40* MS25043-40* MS3105-40
SHELL
SIZE
PLUG CAP RECEPTACLE DUMMY RECEPTACLES
DUST CAPS
*Contact us for other platings. *D = Olive drab chromate over cadmium DA = Anodized
44
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
STEP 1: Slide the rear
accessories over the wire
bundle in the proper sequence
for re-assembly: cable clamp
and/or endbell first, then ferrule
and (if used) coupling nut.
STEP 2: Insert individual wires
through the proper holes in the
grommet. Use isopropyl alcohol
as a lubricant.
STEP 3: Solder wires to
appropriate contacts on the rear
of the connector. Information on
standard soldering practices is
available upon request. Please
contact us.
STEP 4: Fixture the connector
for reassembly using the
endbell assembly tools on
apage 122.
STEP 5: Slide the grommet
down the wires (lubricating the
grommet with isopropyl alcohol
will help).
STEP 6: Fill all unused
grommet cavities with a wire
hole filler to maintain the sealing
integrity of the connector.
STEP 7: Slide coupling nut,
ferrule, and endbell accessories
over rear of the connector and
tighten. For tooling,
asee page 122.
ASSEMBLY INSTRUCTIONS
SOLDER CONTACTS
LATCH CRIMP
TOOL
LOCATOR LOCATOR
INDEX MARK
LOCATOR
COLOR CODE
LATCH
TURRET
16S Blue Blue
16 Green Red
12 Red Red
CRIMP TOOL OPERATION
LOCK PIN
DIAL
STEP 1: Strip the wires to the appropriate
length. See strip lengths on the Contact
Selection Guide, apage 30.
STEP 2: Open the crimp tool by
squeezing the handles. Push the
latch on the turret to release the
locator. Attach the turret to the
crimp tool using the two captive
hex bolts in the turret.
STEP 3: Select the proper locator position
for your contact by rotating the locator
until the proper color is aligned with the
index mark. Push locator back down until
it snaps into position.
STEP 4: Adjust dial for proper wire gauge.
To change the dial setting, remove the lock
pin and lift center of dial. Turn to the desired
wire gauge. Replace lock pin on dial.
STEP 5: Cycle the tool before inserting the
contact to be sure the tool is in the open
position. Drop the contact, mating end first,
into the crimp cavity of the tool. Squeeze the
tool handle just enough to grip the contact
without actually crimping it.
STEP 6: Insert the stripped wire into the
contact with a slight twisting motion. Be
sure all wire strands are inside the contact.
Squeeze the handle to cycle the tool. The
handle will not release until the contact is
completely crimped.
CONTACT
SIZE
PIN LOCATOR
COLOR
SOCKET
LOCATOR
COLOR
NOTE: Hand-crimp tools can be used
with size 16S, 16 & 12 contacts. Size
8, 4 and 0 contacts require the use of
air-powered crimp tools. Contact us for
assistance in the use of these tools.
45
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
WIRE
CRIMP
CHECK TO BE SURE CONDUCTOR IS VISIBLE THROUGH
WIRE INSPECTION HOLE
STEP 7: Remove the crimped contact. Pull on the wire
slightly to be sure it is properly crimped. Be sure the contact
is not bent or damaged in any way. Visually inspect the crimp.
MICRO-SECTIONS: Enlargement of micro-section permits
a final inspection of crimp quality. This test is recommended
whenever new tools or new types of wire or contacts are used.
Initial minimum pullout force in lbs. (before conditioning)
SIZE WIRE GAUGE (AWG) LB.
16 20 20
18 40
16 50
12 14 70
12 110
8 8 185
4 4 450
0 0 800
GUIDE
(PILOT) PIN
SHOULDER
INSERTION
TOOL
ASSEMBLY INSTRUCTIONS
INSERTION OF CONTACTS
ASSEMBLY
FIXTURE
CRIMP TOOL OPERATION (CONTINUED) CRIMP TENSILE STRENGTH
INSULATION SHOULD PRESS AGAINST THE END OF THE CONTACT.
STEP 1: Slide the rear accessories
over the wire bundle in the proper
sequence for re-assembly: cable
clamp and/or endbell first, then
ferrule, and coupling nut.
STEP 2: Use the proper insertion tool
from the Contact Selection Chart on
apage 31. Place the contact in the
tool. The tool should push against the
shoulder of the contact. Contact sizes
16S, 16, and 12 use a pliers-style tool.
Contact sizes 8, 4 and 0 use a tool with
a C-shaped shaft.
STEP 3: Lubricate the grommet with
isopropyl alcohol (do not use any other
type of lubricant). Insert the contact
through the appropriate cavity in the
grommet. Sizes 16S, 16 and 12 socket
contacts must be installed using guide
(pilot) pins. See the Contact Selection
Guide on apage 31 for Insertion Guide
(Pilot) Pin part numbers.
STEP 4: Place the connector into an assembly
fixture. Fixtures are available for production
use; contact us using the information below.
If you are not using a fixture, be sure to allow
clearance on the mating face of the connector
for the guide pins to come through the
connector during insertion.
STEP 5: Lubricate the contact cavities of the
connector insulator with isopropyl alcohol
(do not use any other type of lubricant).
STEP 6: Using guide pins where necessary,
push straight down with a firm, even
pressure until the contact snaps into position
in the proper cavity. Start at the center of the
pattern and work toward the outer edges.
CONNECTOR
46
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
ASSEMBLY INSTRUCTIONS
PIN CONTACT SOCKET
CONTACT
CROSS-SECTION
OF CONNECTOR
CROSS-SECTION
OF CONNECTOR
SOFT JAW
PLIERS
EXTRACTION OF CONTACTS
UNCRIMPED
CONTACTS
PIN EXTRACTION END
HANDLE
LOCK RING
SOCKET
EXTRACTION END
INSERTION OF CONTACTS (CONTINUED)
STEP 7: Fill any unused cavities
with contacts.
STEP 8: Check the mating
face of the connector to ensure
that all of the same size contacts
are on the same plane (fully
inserted). If not, the contact is
not fully inserted. Remove
the contact using the proper
extraction tool and procedure,
and reinsert. Do not attempt
to reinsert the insertion tool to
correct the problem.
STEP 9: A wire hole filler must
be inserted into the grommet
behind the unused contacts to
maintain the sealing integrity of
the connector. See the Contact
Selection Chart on apage 31
for wire hole fillers.
STEP 10: Place the connector
back in the fixture for re-assembly.
Slide the connector accessories
back down the cable over the rear
of the connector and tighten. Use
the appropriate endbell tools as
shown on apage 122.
STEP 1: Remove the endbell accessories and slide them back
over the wires. Use the appropriate endbell tools as shown on
apage 122.
STEP 2: Use the proper extraction tool from the Contact Selection
Chart on apage 31. The extraction tool can be used for both pin
and socket contacts by removing the shaft from the handle and
reversing it for pin or socket extraction.
STEP 3: On the mating face of the connector, insert the tool over
the pin contact or into the socket contact until the tool touches
bottom. Apply a slow, continuous pressure to push the contact out
through the rear of the connector. When the shoulder of the tool
“thunks” against the insulator, the contact is extracted.
STEP 4: Carefully remove the extraction tool from the connector
to avoid damage to the insulator.
47
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
AMPHENOL HOW-TO-ORDER GUIDE
CONNECTOR TYPE
J Prefix*
MS Military Standard
SHELL SIZE & INSERT ARRANGEMENT
See tables on apages 72-93.
Parts are the only MS-approved inserts.
AIT/MS SERIES CONNECTORS
J MS 3102 R 18-3 P W -RES
(NOT J MS)
Modification for A-style service
class only
RESilient insert (neoprene)
HAVE A UNIQUE REQUIREMENT?
Quick assembly of custom products is our specialty! Email us at sales@peigenesis.com or complete our online Technical Request at
www.peigenesis.com/technical-support. To contact us by phone, please see the back cover for a complete listing of our branch
offices and contact numbers.
SHELL STYLE
3100 = Wall-mounting receptacle
3101 = Cable-connecting receptacle (plug)
3102 = Box-mounting receptacle
3106 = Straight plug
3108 = 90° plug
SERVICE CLASS
A Solid shell, not MS qualified
C Solid shell for pressurized applications
E Environmentally-resistant
F Environmentally-resistant with strain relief (J MS part
number only)
R Lightweight, environmentally-resistant (J MS part number
only; not available for 3108)
INSERT ROTATION
W, X, Y, and Z designate
that the insert is rotated in its
shell from normal position. No
letter is required for normal
(no rotation) position. See
tables on apages 83-93.
CONTACT TYPES
P Pin contact
S Socket contact
Note: The US military changed the designation from cable
receptacle to plug in the MIL-DTL-5015 specifications.
For insert arrangements over 50 and shell size 40 and above.
Exceptions: 36-52, 40-1, 40-9 and 40-56 are approved.
*The March 30, 2003 revision of MIL-DTL-5015H requires that the letters JAN or J be physically marked on the connector preceding the
MS designator. This mark certifies that the connector meets specification. The United States Government has obtained Certificate and
Registration Number 504,860 for the certification mark “JAN” and Registration Number 1,586,261 for the certification mark “J.”
Mates
with
48
5015 - AMPHENOL AIT/MS SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support www.peigenesis.com sales@peigenesis.com
SERIES
AC Designates Amphenol
Industrial Series
CONTACT STYLE
C Designates crimp contacts
S Designates solder contacts
CL Designates crimp contacts with low-smoke,
zero-halogen insert and grommets
SL Designates solder contacts with low-smoke,
zero-halogen insert and grommets
SHELL STYLE
00 Wall-mounting receptacle
01 In-line receptacle
02 Box-mounting receptacle
06 Straight plug
08 90˚ plug
CONNECTOR CLASS
A General-duty, threaded backshell, cable clamp,
no grommet
AF General-duty, threaded backshell, cable clamp,
no grommet
CF General-duty, threaded backshell, gland-sealed
cable clamp, no grommet (08 only)
E General-duty, integral endbell with cable clamp,
with grommet (08 not integral endbell)
F General-duty, threaded backshell, cable clamp,
with grommet
LCFZ Long-threaded endbell, gland-sealed cable
clamp, with grommet (06 only)
PGA Environmental connector for jacketed cable
PGR Environmental connector for jacketed cable
R General-duty, threaded backshell, no cable
clamp, with grommet (06 only)
SB Shielded shrink boot endbell with grommet
(06 only)
SHELL SIZE & LAYOUT
See layout availability on apages 72-93.
AC SERIES CONNECTORS
PLATING MODIFICATION CODES
003 Olive drab cadmium
plate finish
023 Electroless nickel finish
(RoHS with crimp only)
024 Green zinc alloy finish
025 Non-conductive black
alloy finish (RoHS with crimp)
027 Conductive black alloy finish
(RoHS with crimp)
G96 Black hard-coat anodize
A24 .000035 gold/nickel
on contacts
116 Less pre-tinned solder cups
(solder only)
472 116 & 025 mod codes (RoHS)
548 116 & 023 mod codes (RoHS)
553 116 & 027 mod codes (RoHS)
ALTERNATE INSERT ROTATION
W, X, Y, and Z designate that the
insert is rotated in its shell from a normal
position. No letter required for normal (no
rotation) position. See apages 83-93.
CONTACT TYPE
P Pin contacts
S Socket contacts
R RADSOK (high-amperage)
crimp socket contacts only for
sizes 12, 8, 4, and 0
AC C 06 AF 18-1 S X - 025
Ordering example part number ACC06AF18-1SX-025 is shown as follows:
If part number incorporates a “B,” see AIB/GT apage 119.
AMPHENOL HOW-TO-ORDER GUIDE
Mates
with