ECI motor. ECl-63.XX-K1 - Highly dynamic 3-phase internal rotor motor with EC technology - Low cogging torque - Robust, noise-optimized ball bearing system for a long service life - High efficiency and high power density realized in a compact design - Basic motor with electronic module K1 for operation with external control electronics - Mechanical design and interfaces designed for modular flexibility - Protection class IP 40 / IP 54 and connection by connector system Nominal data Type Nominal voltage (UJ voe Nominal speed (n,r rpm 24 48 24 48 48 4 000 Nominal torque (M,)** mNm 360 360 670 670 800 880 Nominal current (I,)** A 8.50 4.50 14.0 6.50 17.6 8.50 Nominal output power (P,)** w Starting torque (M..,) mNm 150 150 280 280 335 370 1 800 1 800 3 300 3 300 5 300 4 400 Permissible peak current (lmJ*** A 55 30 95 45 150 57 Speed at no-load operation (n,) rpm 5 800 6 800 5 900 5 900 6100 6 000 No-load current (I,) A 0.50 0.30 0.70 0.32 1.30 0.45 Recommended speed control range rpm Rotor moment of inertia (J,) kgm' x1o-' 19 19 38 38 57 57 Motor constant (KJ mVs/rad 41.4 73.3 40.4 83.8 40.4 83.8 Connection resistance (f\) fl 0.14 0.42 0.08 0.24 0.04 0.15 Connection inductance (L,,) mH 0.26 0.88 0.14 0.57 0.09 0.33 0 ... 5 000 To be implemented via the control electronics Overload protection :g 24 Permissible ambient temperature range (Tu) oc Weight kg Order no. (wire interface)* IP 40 9326320103 9326320105 9326340103 9326340105 9326360106 9326360108 Order No. (connector interface)* IP 54 9326320100 9326320102 9326340100 9326340102 9326360102 Subject to alterations Classification of protection class refers to installed state wtth sealing on the flange side Toe wave geometry for the IP54 version differs from the illustrated drawing ** AtTu max. 40 C *** Penmissible time for peak current max. 1 sec. - to be repeated only after complete cool down 16 . 0 ... +40 0.90 0.90 1.20 1.20 1.50 1.50 ebmpapst Planetary gearheads. Performax(R) Plus 63 - High torques thanks to large gearing width in the first gear stage - Good shock resistance due to housing made of case-hardened steel with linear tooth profile in the output stage - Very quiet running due to helical teeth in the first gear stage - Planetary wheels made of plastic with optimized sliding properties in the first stage ensure smooth operation - Large effective diameter thanks to radial screw connection Image of 2-stage gearhead Nominal data Gearheads Reduction ratio No. of stages - Performax'" Plus 63.1 3.20 Efficiency Max. input speed (n,) Short-term torque (M""") rpm Nm Nm Gear play Permissible operating temperature (T0) oc Rated output torque (M.,,) Operating mode 6.50 16.3 Protection class 5.00 9.00 0.90 6 000 11.9 7.60 29.8 19.0 0.7 ... 1.2 -20 ... +80 S1 IP 50 Weight kg 0.66 Shaft load radial / axial N Service life h 350 / 500 5 000 Lubrication Installation position Performax'"Plus 63.2 17.0 21.3 30.0 38.3 54.0 72.3 102 204 16.9 42.3 23.9 59.8 27.4 68.5 2 0.81 4.40 11.0 45.2 113 64.0 160 28.9 72.3 6 000 41.0 102.5 0.7 ... 1.2 -20 ... +80 S1 IP 50 1.20 350 / 500 5 000 Maintenance-free grease lubrication for life any Subject to alterations on request :g 60 ebmpapst