http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2006.11.2
Noise Suppression Products/EMI Suppression Filters > Chip EMIFILr Inductor Type > Chip Ferrite Beads
Chip EMIFILr Inductor Type Chip Ferrite Beads
BLM41A Series (1806 Size)
o
0.7±0.3
4.5±0.2 1.6±0.2
1.6±0.2
(in mm)
(Resistance element becomes dominant
at high frequencies.)
For your new designs, alternative parts should be used. These parts should be used only for existing design. Please consult with us for details.
■ Dimension ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
L180mm Embossed Tape 2500
K330mm Embossed Tape 8000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance(max.) Operating
Temperature Range Number of Circuits
BLM41AF800SN1p
80ohm±25% - 500mA 0.10ohm -55°C to +125°C 1
BLM41AF151SN1p
150ohm±25% - 200mA 0.50ohm -55°C to +125°C 1
100
75
50
25
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
200
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
■ Impedance-Frequency Characteristics
BLM41AF800SN1
■ Impedance-Frequency Characteristics
BLM41AF151SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2006.11.2
Noise Suppression Products/EMI Suppression Filters > Chip EMIFILr Inductor Type > Chip Ferrite Beads
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
