PHOENIX CONTACT Ltd Page 1 / 6

http://www.phoenixcontact.co.uk 18-Jan-2012

Extract from the online

TRIO-PS/ 3AC/24DC/ 5

Order No.: 2866462

Pack 1

Customs tariff 85044081

Country of Origin CN

Catalog page information Page 592 (IF-2011)

Product notes

WEEE/RoHS-compliant since:

Please note that the data given

here has been taken from the

online catalog. For comprehensive

TRIO POWER is the DIN-rail-mountable power supply unit with basic functions. With an output voltage of 5 V DC, 12

V DC, 24 V DC, and 48 V DC and 1- and 3-phase versions with 60 W or 960 W, it is particularly suited for use in series

production in mechanical engineering. The wide-range input and international certification package allow worldwide

The high MTBF of 500,000 h stands for high supply reliability. The devices can be connected in parallel to increase the

capacity and redundancy.

The clear LED signaling and the device connection with double terminal block for plus and minus for fast potential

distribution are further advantages of this device series. A third minus terminal block simplifies the grounding on the

PHOENIX CONTACT Ltd Page 2 / 6

http://www.phoenixcontact.co.uk 18-Jan-2012

2x 360 V AC ... 575 V AC (for 2-phase operation)

AC frequency range 45 Hz ... 65 Hz

Current consumption Approx. 3x 0.3 A (400 V AC)

Approx. 3x 0.25 A (500 V AC)

2x 0.65 A (400 V AC)

2x 0.5 A (500 V AC)

Nominal power consumption (> 24 V constant capacity)

Inrush surge current < 15 A

Power failure bypass > 20 ms (400 V AC)

> 30 ms (480 V AC)

Nominal output voltage 24 V DC ±1%

Setting range of the output voltage 22.5 V DC ... 29.5 V DC (> 24 V constant capacity)

Output current 5 A (-25°C ... 55°C)

Derating 55 °C ... 70 °C (2.5%/K)

Connection in parallel Yes, for redundancy and increased capacity

Connection in series Yes

Max. capacitive load Unlimited

Current limitation Approx 6 A (in the event of a short-circuit)

Control deviation < 1 % (change in load, static 10% ... 90%)

< 2 % (change in load, dynamic 10% ... 90%)

PHOENIX CONTACT Ltd Page 3 / 6

http://www.phoenixcontact.co.uk 18-Jan-2012

Width 40 mm

Height 130 mm

Depth 115 mm

Net weight 0.6 kg

Operating voltage display Green LED

Efficiency > 89 % (at 400 V AC and nominal values)

Insulation voltage input/output 4 kV AC (type test)

2 kV AC (routine test)

Degree of protection IP20

Protection class I, with PE connection

Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC

Noise immunity EN 61000-6-2:2005

Low Voltage Directive Conformance with LV directive 2006/95/EC

Standard – Electrical equipment of machines EN 60204

Standard - Safety of transformers EN 61558-2-17

Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)

EN 61558-2-17

Standard – Electronic equipment for use in

electrical power installations and their assembly

into electrical power installations

EN 50178/VDE 0160 (PELV)

PHOENIX CONTACT Ltd Page 4 / 6

http://www.phoenixcontact.co.uk 18-Jan-2012

electrical equipment

Standard – Limitation of mains harmonic currents EN 61000-3-2

UL approvals UL/C-UL listed UL 508

UL/C-UL Recognized UL 60950

Surge voltage category III

Connection data, input

Connection method Screw connection

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 2.5 mm²

Conductor cross section stranded min. 0.2 mm²

Connection method Screw connection

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 2.5 mm²

Conductor cross section stranded min. 0.2 mm²

Conductor cross section stranded max. 2.5 mm²

Conductor cross section AWG/kcmil min. 16

Conductor cross section AWG/kcmil max 12

Stripping length 9 mm

Status display "DC OK" LED green

PHOENIX CONTACT Ltd Page 5 / 6

http://www.phoenixcontact.co.uk 18-Jan-2012

PHOENIX CONTACT Ltd Page 6 / 6

http://www.phoenixcontact.co.uk 18-Jan-2012

PHOENIX CONTACT Ltd

Halesfield 13

Telford / Shropshire / TF7 4PG,England

Phone 01952 681 700

Fax 01952 681 799

Phoenix Contact Ltd.

Technical modifications reserved;