DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D109 BGA6489 MMIC wideband medium power amplifier Product specification 2003 Sep 18 Philips Semiconductors Product specification MMIC wideband medium power amplifier FEATURES BGA6489 PINNING * Broadband 50 gain block PIN DESCRIPTION * 20 dBm output power 1 RF out/bias * SOT89 package 2 GND * Single supply voltage needed. 3 RF in APPLICATIONS * Broadband medium power gain blocks * Small signal high linearity amplifiers handbook, halfpage * Variable gain and high output power in combination with the BGA2031 3 1 2 * Cellular, PCS and CDPD * IF/RF buffer amplifier 1 2 Bottom view * Wireless data SONET 3 MGX418 * Oscillator amplifier, final PA Marking code: 4A. * Drivers for CATV amplifier. Fig.1 Simplified outline (SOT89) and symbol. DESCRIPTION Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband medium power amplifier with internal matching circuit in a 4-pin SOT89 plastic low thermal resistance SMD package. The BGA6x89 series of medium power gain blocks are resistive feedback Darlington configured amplifiers. Resistive feedback provides large bandwidth with high accuracy. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS TYP. UNIT VS DC supply voltage IS = 74 mA 5.1 V IS DC supply current VS = 8 V; R1 = 39 ; Tj = 25 C 78 mA |s21|2 insertion power gain f = 1.95 GHz 16 dB NF noise figure f = 1.95 GHz 3.3 dB PL 1 dB load power at 1 dB compression f = 850 MHz 20 dBm f = 1.95 GHz 17 dBm CAUTION This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B. 2003 Sep 18 2 Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134) SYMBOL PARAMETER VS DC supply voltage IS DC supply current CONDITIONS MIN. RF input AC coupled Ts 70 C; note 1 MAX. UNIT - 6 V - 150 mA Ptot total power dissipation - 800 mW Tstg storage temperature -65 +150 C Tj operating junction temperature - 150 C PD maximum drive power - 15 dBm Note 1. Ts is the temperature at the soldering point of pin 2. THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER CONDITIONS thermal resistance from junction to solder point Ts 70 C; note 1 VALUE UNIT 100 K/W Note 1. Ts is the temperature at the soldering point of pin 2. STATIC CHARACTERISTICS Tj = 25 C; VS = 8 V; R1 = 39 ; unless otherwise specified. SYMBOL IS 2003 Sep 18 PARAMETER CONDITIONS supply current 3 MIN. TYP. MAX. UNIT 70 78 86 mA Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 CHARACTERISTICS VS = 8 V; IS = 74 mA; Tamb = 25 C; IP3(out) tone spacing = 1 MHz; PL = 0 dBm per tone (see Fig.2); R1 = 39 ; ZL = ZS = 50 ; unless otherwise specified. SYMBOL |s21|2 RL IN RL OUT NF PARAMETER insertion power gain return losses input return losses output noise figure CONDITIONS TYP. UNIT f = 850 MHz 20 dB f = 1.95 GHz 16 dB f = 2.5 GHz 15 dB f = 850 MHz 14 dB f = 1.95 GHz 16 dB f = 2.5 GHz 19 dB f = 850 MHz 16 dB f = 1.95 GHz 12 dB f = 2.5 GHz 10 dB f = 850 MHz 3.1 dB f = 1.95 GHz 3.3 dB f = 2.5 GHz 3.4 dB K stability factor f = 850 MHz 1.2 - f = 2.5 GHz 1.3 - PL 1 dB load power at 1 dB gain compression; f = 850 MHz 20 dBm at 1 dB gain compression; f = 1.95 GHz 17 dBm f = 850 MHz 13 dBm f = 2.5 GHz 12 dBm f = 850 MHz 33 dBm f = 2.5 GHz 27 dBm IP3(in) IP3(out) 2003 Sep 18 input intercept point output intercept point 4 Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 APPLICATION INFORMATION Figure 2 shows a typical application circuit for the BGA6489 MMIC. The device is internally matched to 50 , and therefore does not require any external matching. The value of the input and output DC blocking capacitors C1 and C2 depends on the operating frequency; see the tables below. Capacitors C1 and C2 are used in conjunction with L1 and C3 to fine tune the input and output impedance. For optimum supply decoupling, a 1 F capacitor (C5) can be added. The external components should be placed as close as possible to the MMIC. When using via holes, use multiple via holes per pin in order to limit ground path induction. Resistor R1 is a bias resistor providing DC current stability with temperature. R1(2) handbook, full pagewidth VS C3 C4 C5(1) L1 50 microstrip C1 3 1 VD C2 50 microstrip 2 MGX419 (1) Optional capacitor for optimum supply decoupling. (2) R1 values at operating supply voltage: VS = 6 V; R1 = 15 . VS = 9 V; R1 = 51 . VS = 11.5 V; R1 = 82 . Fig.2 Typical application circuit. Table 1 Component descriptions (see Fig.2) VALUE AT OPERATING FREQUENCY COMPONENT DESCRIPTION DIMENSIONS 500 MHz 800 MHz 1950 MHz 2400 MHz 3500 MHz C1, C2 multilayer ceramic chip capacitor 0603 220 pF 100 pF 68 pF 56 pF 39 pF C3 multilayer ceramic chip capacitor 0603 1 nF 1 nF 1 nF C4 multilayer ceramic chip capacitor 0603 100 pF 68 pF 22 pF 22 pF 15 pF C5 (optional) electrolytic or tantalum capacitor 0603 1 F 1 F 1 F 1 F 1 F L1 SMD inductor 0603 68 nH 33 nH 22 nH 18 nH 15 nH R1 SMD resistor 0.5 W; VS = 9 V - - - - - - 2003 Sep 18 5 1 nF 1 nF Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 90 handbook, full pagewidth 1.0 +1 135 +0.5 0.8 45 +2 0.6 +0.2 0.4 +5 0.2 180 0 0.2 0.5 200 MHz 2 5 10 0 0 2.6 GHz -5 -0.2 -2 -0.5 -135 -45 -1 1.0 -90 MGX400 IS = 74 mA; VS = 8 V; PD = -30 dBm; ZO = 50 . Fig.3 Input reflection coefficient (s11); typical values. 90 handbook, full pagewidth 1.0 +1 135 +0.5 0.8 45 +2 0.6 +0.2 0.4 +5 2.6 GHz 0.2 180 0 0.2 0.5 1 2 5 10 0 0 200 MHz -5 -0.2 -135 -2 -0.5 -45 -1 -90 1.0 MGX401 IS = 74 mA; VS = 8 V; PD = -30 dBm; ZO = 50 . Fig.4 Output reflection coefficient (s22); typical values. 2003 Sep 18 6 Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 MGX402 0 MGX403 25 handbook, halfpage |s |2 handbook, halfpage |s |2 21 (dB) 12 (dB) 20 -10 15 -20 10 -30 5 -40 0 500 1000 1500 0 2000 2500 f (MHz) 0 IS = 74 mA; VS = 8 V; PD = -30 dBm; ZO = 50 . 1500 2000 2500 f (MHz) Insertion gain (|s21|2) as a function of frequency; typical values. Fig.6 MGX404 25 1000 IS = 74 mA; VS = 8 V; PD = -30 dBm; ZO = 50 . Isolation (|s12|2) as a function of frequency; typical values. Fig.5 500 MGX405 40 handbook, halfpage handbook, halfpage PL1dB IP3(out) (dBm) (dBm) 20 30 15 20 10 10 5 0 0 0 500 1000 1500 2000 2500 f (MHz) 0 500 1000 1500 IS = 74 mA; VS = 8 V; ZO = 50 . IS = 74 mA; VS = 8 V; PL = 0 dBm; ZO = 50 . Fig.7 Fig.8 Load power as a function of frequency; typical values. 2003 Sep 18 7 2000 2500 f (MHz) Output intercept as a function of frequency; typical values. Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 MGX406 5 MGX407 5 handbook, halfpage handbook, halfpage NF (dB) K 4 4 3 3 2 2 1 1 0 0 500 1000 1500 0 2000 2500 f (MHz) 0 500 1000 1500 2000 2500 f (MHz) IS = 74 mA; VS = 8 V; ZO = 50 . IS = 74 mA; VS = 8 V; Z0 = 50 . Fig.9 Fig.10 Stability factor as a function of frequency; typical values. Noise figure as a function of frequency; typical values. MGX408 100 handbook, halfpage Is (mA) 90 80 70 60 -40 -20 0 20 40 60 80 Tj (C) VS = 8 V; R1 = 39 . Fig.11 Supply current as a function of operating junction temperature; typical values. 2003 Sep 18 8 This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... s12 s22 9 ANGLE (deg) MAGNITUDE (ratio) ANGLE (deg) MAGNITUDE (ratio) ANGLE (deg) MAGNITUDE (ratio) ANGLE (deg) K-FACTOR 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 0.06 0.09 0.11 0.12 0.14 0.16 0.17 0.18 0.19 0.20 0.21 0.21 0.22 0.22 0.22 0.22 0.21 0.21 0.20 0.19 0.18 0.17 0.16 0.14 0.13 0.13 0.12 0.11 0.11 0.12 28.11 27.41 21.64 15.28 8.01 0.34 -7.27 -14.78 -22.18 -29.33 -36.41 -42.47 -49.06 -55.46 -61.20 -67.02 -73.40 -78.99 -84.54 -91.32 -97.58 -103.60 -111.90 -120.80 -129.80 -143.80 -154.47 -164.40 178.65 160.01 12.79 12.59 12.31 11.97 11.57 11.18 10.75 10.24 9.80 9.40 8.96 8.53 8.16 7.85 7.51 7.16 6.90 6.69 6.42 6.16 5.99 5.83 5.58 5.39 5.30 5.18 5.08 4.71 4.66 4.45 164.42 156.85 149.28 141.88 134.79 127.97 121.56 115.06 109.18 103.40 98.12 92.76 87.50 82.76 78.52 74.16 69.37 65.14 61.15 56.80 52.55 49.08 45.43 40.67 36.66 33.88 30.28 22.43 18.90 18.63 0.06 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.05 0.05 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.07 0.07 0.07 0.07 0.08 0.08 0.08 0.08 0.09 0.09 0.10 -0.30 -0.39 -0.35 -0.32 0.04 0.63 1.57 1.85 3.16 4.29 5.64 7.03 7.74 9.08 10.76 11.89 12.34 13.16 14.33 14.84 15.05 15.72 15.96 15.27 14.68 15.64 15.56 11.60 11.05 10.63 0.12 0.13 0.14 0.14 0.15 0.16 0.16 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.16 0.16 0.16 0.16 0.16 0.17 0.17 0.19 0.20 0.22 0.24 0.28 0.31 0.28 0.31 0.33 -22.91 -35.38 -46.54 -57.20 -61.41 -76.76 -85.75 -94.28 -102.4 -110.3 -118.5 -126.7 -134.8 -143.5 -152.7 -161.8 -171.9 177.4 166.81 156.07 145.29 135.65 126.23 117.62 110.35 104.05 97.10 91.75 84.80 80.37 1.1 1.1 1.1 1.1 1.1 1.1 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 Product specification MAGNITUDE (ratio) BGA6489 f (MHz) Philips Semiconductors s21 s11 MMIC wideband medium power amplifier 2003 Sep 18 Scattering parameters VS = 8 V; IS = 74 mA; PD = -30 dBm; ZO = 50 ; Tamb = 25 C Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 PACKAGE OUTLINE Plastic surface mounted package; collector pad for good heat transfer; 3 leads SOT89 B D A b3 E HE L 1 2 3 c b2 w M b1 e1 e 0 2 4 mm scale DIMENSIONS (mm are the original dimensions) UNIT A b1 b2 b3 c D E e e1 HE L min. w mm 1.6 1.4 0.48 0.35 0.53 0.40 1.8 1.4 0.44 0.37 4.6 4.4 2.6 2.4 3.0 1.5 4.25 3.75 0.8 0.13 OUTLINE VERSION SOT89 2003 Sep 18 REFERENCES IEC JEDEC EIAJ TO-243 SC-62 10 EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 Philips Semiconductors Product specification MMIC wideband medium power amplifier BGA6489 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2003 Sep 18 11 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA75 (c) Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R77/01/pp12 Date of release: 2003 Sep 18 Document order number: 9397 750 11767