DG4599E www.vishay.com Vishay Siliconix Power-off Isolation, 6 , 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer) DESCRIPTION FEATURES The DG4599E is a high performance single-pole, double-throw (SPDT) analog switch designed for 1.8 V to 5.5 V operation with a single power rail. Fabricated with high density CMOS technology, the device achieves low on resistance of 6 and switch off capacitance of 7 pF at a 5 V power supply and low power consumption, and fast switching speeds. The DG4599E features break before make switching performance. It can handle both analog and digital signals and permits signals with amplitudes of up to V+ to be transmitted in either direction. A power-off protection circuit is built into the switch to prevent an abnormal current path through the signal pins during the power-off condition. The part can withstand greater than 7 kV ESD (human body model). The DG4599E is available in the compact SC-70-6L package. * Low switch on-resistance (6 ) * +1.8 V to +5.5 V single supply operation Available * Isolation in powered-off mode Available * Low voltage logic control * Control logic inputs can go over V+ * Low parasitic capacitance * Break before make switching * Latch-up performance exceeds 200 mA per JESD 78 * High ESD rating - 7000 V human body model (JS-001) - 1000 V charge device model (JS-002) * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS * Battery powered devices * Consumer and computing * Instrumentation * Medical equipment * Control and automation FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION SC-70 IN 1 6 NO (Source1) V+ 2 5 COM GND 3 4 NC (Source2) Top view Device marking H8 TRUTH TABLE ORDERING INFORMATION LOGIC NC NO TEMP. RANGE PACKAGE PART NUMBER 0 On Off -40 C to +85 C SC-70-6 DG4599EDL-T1-GE3 1 Off On Notes * Logic "0" 0.8 V * Logic "1" 2.4 V S18-0420-Rev. C, 23-Apr-18 Document Number: 76618 1 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix ABSOLUTE MAXIMUM RATINGS PARAMETER V+, COM, NC, NO, IN reference to GND LIMIT UNIT -0.3 to 6 V Continuous current (any terminal) 50 Peak current (pulsed at 1 ms, 10 % duty cycle) 200 Storage temperature Power dissipation (packages) a -65 to +150 C 250 mW 6-pin SC-70 b ESD / HBM JS-001 7000 ESD / CDM JS-002 1000 Per JESD78 with 1.5 x voltage clamp 200 Latch up mA V mA Notes a. All leads welded or soldered to PC board b. Derate 3.1 mW/C above 70 C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. SPECIFICATIONS (V+ = 5 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 5 V, 10 % VIN = 0.8 V or 2.4 V e LIMITS -40 C to +85 C TEMP. a UNIT MIN. b TYP. c MAX. b Full 0 - V+ V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA Room Full - 6 8 60 65 V+ = 5 V, VCOM = 1.5 V, 3.5 V, INO, INC = 10 mA Room - 0.4 - V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA V+ = 5.5 V, VNO, VNC = VCOM = 1 V / 4.5 V V+ = 0 V, VCOM = 5 V, NO/NC open, VIN = GND V+ = 0 V, VNO, VNC = 5 V, COM open, VIN = GND Room Room Full Room Full Room Full Full Full -1.5 -4 -1 -4 -1 -4 - 0.04 - 2 1.5 4 1 4 1 4 5 5 VIN = 0 V or V+ Full Full Full Full 2.4 -1 6 - 0.8 1 Room Full Room Full Room Room Room Room Room Room Room 1 - 10 8 1 -78 -77 7 7 13 30 40 25 30 - pC Full - 0.004 1 A Analog Switch Analog signal range d Drain-source on-resistance d RDS(on) flatness d RDS(on) match d Switch-off leakage current f VNO, VNC VCOM RDS(on) RDS(on) flatness RDS(on) INO(off), INC(off) ICOM(off) Channel-on leakage current f Power-down leakage Digital Control Input high voltage Input low voltage Input capacitance d Input current Dynamic Characteristics ICOM(on) IPD VINH VINL CIN IINL or IINH Turn-on time d tON Turn-off time d tOFF Break-before-make time d Charge injection d Off-isolation d Crosstalk d NO, NC off capacitance d Channel-on capacitance d Power Supply Power supply current d S18-0420-Rev. C, 23-Apr-18 tBBM QINJ OIRR XTALK CNO(off) CNC(off) CON I+ V+ = 5.5 V, VNO, VNC = 1 V / 4.5 V, VCOM = 4.5 V / 1 V VNO or VNC = 3 V, RL = 300 , CL = 35 pF CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 RL = 50 , CL = 5 pF, f = 1 MHz VIN = 0 V or V+, f = 1 MHz VIN = 0 V or V+ V nA A V pF A ns dB pF Document Number: 76618 2 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix SPECIFICATIONS (V+ = 3 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 3 V, 10 % VIN = 0.4 V or 2 V e LIMITS -40 C to +85 C TEMP. a UNIT MIN. b TYP. c MAX. b Full 0 - V+ Room - 13 95 Full - 15 105 - 1.4 - Analog Switch Analog signal range d VNO, VNC VCOM V Drain-source on-resistance d RDS(on) V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA RDS(on) flatness d RDS(on) flatness V+ = 3 V, VCOM = 0 V to V+, INO, INC = 10 mA Room RDS(on) match d RDS(on) V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA Room - 0.03 2 Room -400 - 400 Full -4 - 4 nA Room -800 - 800 pA Switch-off leakage current f INO(off), INC(off) ICOM(off) Channel-on leakage current f ICOM(on) V+ = 3.3 V, VNO, VNC = 1 V / 3 V, VCOM = 3 V / 1 V V+ = 3.3 V, VNO, VNC = VCOM = 1 V / 3 V pA Full -8 - 8 nA Room -800 - 800 pA Full -8 - 8 nA Digital Control Input high voltage VINH Full 2 - - Input low voltage VINL Full - - 0.4 Input capacitance d Input current CIN IINL or IINH V Full - 6 - pF Full -1 - 1 A Room - 13 45 Full - - 55 Room - 9 35 Full - - 40 Room 1 - - CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 Room - 0.9 - RL = 50 , CL = 5 pF, f = 1 MHz Room - -78 - Room - -77 - VIN = 0 V or V+ Dynamic Characteristics Turn-on time d tON Turn-off time d tOFF Break-before-make time d Charge injection d tBBM QINJ Off-isolation d OIRR Crosstalk d XTALK NO, NC off capacitance d Channel-on capacitance d VNO or VNC = 2 V, RL = 300 , CL = 35 pF CNO(off) CNC(off) VIN = 0 V or V+, f = 1 MHz CON Room - 7 - Room - 7 - Room - 14 - Full - 0.002 1 ns pC dB pF Power Supply Power supply current d S18-0420-Rev. C, 23-Apr-18 I+ VIN = 0 V or V+ A Document Number: 76618 3 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix SPECIFICATIONS (V+ = 2.5 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 2.5 V, 10 % VIN = 0.4 V or 2 V e LIMITS -40 C to +85 C TEMP. a MIN. b UNIT TYP. c MAX. b Analog Switch Analog signal range d VNO, VNC VCOM Drain-source on-resistance d RDS(on) V+ = 2.2 V, VCOM = 1 V, INO, INC = 10 mA RDS(on) flatness d RDS(on) flatness V+ = 2.5 V, VCOM = 0 V to V+, INO, INC = 10 mA RDS(on) match d RDS(on) V+ = 2.2 V, VCOM = 1.2 V, INO, INC = 10 mA Switch-off leakage current f INO(off), INC(off) ICOM(off) Channel-on leakage current f ICOM(on) V+ = 2.7 V, VNO, VNC = 0.5 V / 1.5 V, VCOM = 1.5 V / 0.5 V V+ = 2.7 V, VNO, VNC = VCOM = 0.5 V / 1.5 V Full 0 - V+ Room - 23 110 Full d - 24 120 Room - 1.7 - V Room - 0.1 2 Room -200 - 200 Full d -3 - 3 nA Room -200 - 200 pA pA Full d -3 - 3 nA Room -200 - 200 pA Full d -3 - 3 nA Digital Control Input high voltage VINH Full 2 - - Input low voltage VINL Full - - 0.4 Input capacitance d Input current CIN IINL or IINH VIN = 0 V or V+ V Full - 6 - pF Full -1 - 1 A Room - 16 50 Dynamic Characteristics Turn-on time d tON Turn-off time d tOFF Break-before-make time d tBBM Charge injection d QINJ Off-isolation d OIRR Crosstalk d XTALK NO, NC off capacitance d Channel-on capacitance d d - - 60 Room - 10 35 Full - - 45 Room d 1 - - CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 Room - 0.9 - RL = 50 , CL = 5 pF, f = 1 MHz Room - -78 - Room - -77 - Room - 7 - Room - 7 - Room - 14 - Full - - 1 Full VNO or VNC = 1.5 V, RL = 300 , CL = 35 pF CNO(off) CNC(off) VIN = 0 V or V+, f = 1 MHz CON ns pC dB pF Power Supply Power supply current d S18-0420-Rev. C, 23-Apr-18 I+ VIN = 0 V or V+ A Document Number: 76618 4 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix SPECIFICATIONS (V+ = 2 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 2 V, 10 % VIN = 0.4 V or 1.6 V e LIMITS -40 C to +85 C TEMP. a UNIT MIN. b TYP. c MAX. b 0 - V+ Analog Switch Analog signal range d VNO, VNC VCOM Full Drain-source on-resistance d RDS(on) V+ = 1.8 V, VCOM = 1 V, INO, INC = 10 mA RDS(on) flatness d RDS(on) flatness V+ = 2 V, VCOM = 0 V to V+, INO, INC = 10 mA RDS(on) match d RDS(on) V+ = 1.8 V, VCOM = 1 V, INO, INC = 10 mA Switch-off leakage current f INO(off), INC(off) ICOM(off) Channel-on leakage current f ICOM(on) V+ = 2.2 V, VNO, VNC = 0.5 V / 1.5 V, VCOM = 1.5 V / 0.5 V V+ = 2.2 V, VNO, VNC = VCOM = 0.5 V / 1.5 V Room - 37 110 Full d - 36 120 Room - 3 - V Room - 0.04 2 Room -200 - 200 Full d -3 - 3 nA Room -200 - 200 pA pA Full d -3 - 3 nA Room -200 - 200 pA Full d -3 - 3 nA Digital Control Input high voltage VINH Full 1.6 - - Input low voltage VINL Full - - 0.4 Input capacitance d Input current CIN IINL or IINH VIN = 0 V or V+ V Full - 6 - pF Full -1 - 1 A Room - 21 50 Dynamic Characteristics Turn-on time d tON Turn-off time d tOFF Break-before-make time d tBBM Charge injection d QINJ Off-isolation d OIRR Crosstalk d XTALK NO, NC off capacitance d Channel-on capacitance d - - 60 Room - 13 35 Full d - - 45 Full VNO or VNC = 1.5 V, RL = 300 , CL = 35 pF Room 1 - - CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 Room - 0.8 - RL = 50 , CL = 5 pF, f = 1 MHz Room - -78 - Room - -77 - Room - 7 - Room - 7 - Room - 14 - Full - - 1 CNO(off) CNC(off) d VIN = 0 V or V+, f = 1 MHz CON ns pC dB pF Power Supply Power supply current d I+ VIN = 0 V or V+ A Notes a. Room = 25 C, full = as determined by the operating suffix b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet c. Typical values are for design aid only, not guaranteed nor subject to production testing d. Guarantee by design, nor subjected to production test e. VIN = input voltage to perform proper function f. Guaranteed by 5 V leakage testing, not production tested S18-0420-Rev. C, 23-Apr-18 Document Number: 76618 5 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title Axis Title 50 V+ = +1.8 V 35 1000 V+ = +2.7 V 1st line 2nd line 30 25 V+ = +3.0 V 100 V+ = +3.3 V 15 V+ = +4.5 V 10 5 20 1000 18 16 14 -40 C V+ = +5.5 V 0 1 2 3 4 10 V+ = +2.2 V IS = 10 mA 6 10 5 10 0 0.5 1 1.5 2.5 VCOM - Analog Voltage (V) 2nd line RDS(on) vs. VCOM and Supply Voltage RDS(on) vs. Analog Voltage and Temperature Axis Title Axis Title 10000 10000 +85 C 46 1000 6 100 4 -40 C V+ = +4.5 V IS = 10 mA 36 1000 +25 C 31 26 21 100 -40 C 16 V+ = +1.8 V IS = 10 mA 11 2 6 10 0 41 1 2 3 4 1st line 2nd line +25 C 8 2nd line RON - On-Resistance () +85 C 10 1st line 2nd line 10 0 5 0.5 1 1.5 2 VCOM - Analog Voltage (V) 2nd line VCOM - Analog Voltage (V) 2nd line RDS(on) vs. Analog Voltage and Temperature RDS(on) vs. Analog Voltage and Temperature Axis Title Axis Title 18 500 10000 +85 C +25 C 16 1000 1st line 2nd line 14 12 10 100 -40 C 2nd line Leakage Current (pA) 0 8 1000 ICOM(ON), VCOM = 4.5 V -1000 100 INC/NO(OFF), VCOM = 4.5 V, VNC/NO = 1 V -1500 ICOM(OFF), VCOM = 1 V, VNC/NO = 4.5 V V+ = +5.5 V 6 10 0.5 ICOM(OFF), VCOM = 4.5 V, VNC/NO = 1 V -500 V+ = +2.7 V IS = 10 mA 0 10000 INC/NO(OFF), VCOM = 1 V, VNC/NO = 4.5 V 1st line 2nd line 2nd line RON - On-Resistance () 2 VCOM - Analog Voltage (V) 2nd line 12 2nd line RON - On-Resistance () 100 12 8 IS = -10 mA 0 +25 C 22 1st line 2nd line 40 20 10000 +85 C 24 2nd line RON - On-Resistance () 45 2nd line RON - On-Resistance () 26 10000 1 1.5 2 2.5 3 ICOM(ON), VCOM = 1 V -2000 -40 -20 0 20 40 10 60 80 VCOM - Analog Voltage (V) 2nd line Temperature (C) 2nd line RDS(on) vs. Analog Voltage and Temperature Leakage Current vs. Temperature S18-0420-Rev. C, 23-Apr-18 Document Number: 76618 6 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 10000 INC/NO(OFF), VCOM = 1 V, VNC/NO = 3 V 1000 0 -50 -100 -150 ICOM(ON), VCOM = 3 V INC/NO(OFF), VCOM = 3 V, VNC/NO = 1 V 100 ICOM(OFF), VCOM = 1 V, VNC/NO = 3 V V+ = +3.3 V ICOM(ON), VCOM = 1 V -200 -40 -20 0 20 40 2nd line Loss, OIRR, XTALK (dB) ICOM(OFF), VCOM = 3 V, VNC/NO = 1 V 1st line 2nd line 2nd line Leakage Current (pA) 50 10 60 80 Axis Title 10 Loss 0 -10 -20 -30 -40 XTALK -50 -60 -70 -80 -90 -100 V+ = +5 V -110 100K 1M 10M 100 10 100M 1G Leakage Current vs. Temperature Insertion Loss, Off-Isolation Crosstalk vs. Frequency Axis Title 1000 10000 V+ = +5.5 V VIN = V+ or GND 10000 V+ = +5 V 1000 1.2 1 0.8 100 0.6 0.4 10 1000 1 1st line 2nd line 1.4 2nd line I+ - Supply Current (A) 100 1.6 1st line 2nd line 2nd line I+ - Supply Current (nA) OIRR Frequency (Hz) 2nd line Axis Title 0.1 0.01 100 0.001 0.0001 0.2 0 10 -40 -20 0 20 40 60 80 0.00001 10 100 100 1000 100K 10 10M 1M Input Switching Frequency (Hz) 2nd line Supply Current vs. Temperature Supply Current vs. Input Switching Frequency Axis Title Axis Title 20 1st line 2nd line 1000 50.0 100 40.0 V+ = +5 V VIN = 1.8 V 16 V+ = +5 V, tON V+ = +3 V, tON 14 1000 12 10 8 V+ = +5 V, tOFF 6 100 V+ = +3 V, tOFF 4 2 30.0 10 -20 10000 18 1st line 2nd line 60.0 2nd line tON, tOFF - Switching Time (ns) 10000 -40 10K Temperature (C) 2nd line 70.0 2nd line I+ - Supply Current (A) 1000 Temperature (C) 2nd line 2 1.8 10000 1st line 2nd line Axis Title 100 0 20 40 60 80 100 0 10 -50 -30 -10 10 30 50 70 90 Temperature (C) 2nd line Temperature (C) 2nd line Supply Current vs. Temperature Switching Time vs. Temperature S18-0420-Rev. C, 23-Apr-18 Document Number: 76618 7 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title Axis Title 10000 1000 10000 100 V+ = +2.5 V, tOFF V+ = +2.0 V, tOFF V+ = 5 V 10 1000 1 V+ = 3.0 V 0.1 0.01 V+ = 2.5 V 0.001 100 0.0001 0.00001 -30 -10 10 30 50 70 V+ = 2 V 0.000001 10 -50 90 10 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Temperature (C) 2nd line VIN (V) 2nd line Switching Time vs. Temperature Supply Current vs. Enable Input Voltage Axis Title 10000 -40 C to +85 C VINL 100 -5.0 1000 -10.0 1st line 2nd line 1000 2nd line QINJ - Charge Injection (pC) 0 VINH V+ = 2 V 100 V+ = 2.5 V -15.0 V+ = 3 V V+ = 5 V -20.0 10 1.5 2.5 3.5 4.5 5.5 10 0 1 2 3 4 5 V+ - Supply Voltage (V) 2nd line VNC/NO - Analog Voltage (V) 2nd line Switching Threshold vs. Supply Voltage Charge Injection vs. Analog Voltage ICOM(PD) Power Down Leakage Current (nA) ICOM(PD) Power Down Leakage Current (nA) Axis Title 10000 1st line 2nd line 2nd line VIN - Switching Threshold (V) 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1st line 2nd line 1000 V+ = +2.5 V, tON 2nd line I+ - Supply Current (A) 100 V+ = +2.0 V, tON 1st line 2nd line 2nd line tON, tOFF - Switching Time (ns) 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 8 V+ = VIN = GND 7 6 5 4 85 C 3 2 -40 C 1 25 C 0 0 2 4 6 VCOM (V) 2nd line Power Down Leakage Current vs. VCOM S18-0420-Rev. C, 23-Apr-18 2.5 V+ = VIN = GND, VCOM = +3 V 2 1.5 1 0.5 0 -40 -20 0 20 40 60 80 100 Temperature (C) 2nd line Power Down Leakage Current vs. Temperature Document Number: 76618 8 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix TEST CIRCUITS V+ 3V Logic Input tf < 20 ns V+ NO or NC Switch tr < 20 ns 50 % 0V Switch Output COM V OUT 0.9 x V OUT Switch Output IN Logic Input RL 300 GND CL 35 pF 0V tOFF tON Logic "1" = switch on Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) RL V OUT = V COM R L + R ON Fig. 1 - Switching Time V+ Logic Input V+ VNO VNC 0V COM NO tr < 5 ns tf < 5 ns 3V VO NC RL 300 IN CL 35 pF GND VNC = V NO VO Switch Output 90 % 0V tD tD CL (includes fixture and stray capacitance) Fig. 2 - Break-Before-Make Interval V+ Rgen VOUT V+ NC or NO COM VOUT VOUT + IN Vgen CL = 1 nF 3V IN On Off On GND Q = VOUT x CL IN depends on switch configuration: input polarity determined by sense of switch. Fig. 3 - Charge Injection S18-0420-Rev. C, 23-Apr-18 Document Number: 76618 9 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG4599E www.vishay.com Vishay Siliconix TEST CIRCUITS V+ 10 nF V+ COM IN COM 0 V, 2.4 V NC or NO V NC/NO Off Isolation = 20 log RL GND VCOM Analyzer Fig. 4 - Off-Isolation V+ 10 nF V+ COM Meter IN 0 V, 2.4 V NC or NO GND HP4192A Impedance Analyzer or Equivalent f = 1 MHz Fig. 5 - Channel Off / On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?76618. S18-0420-Rev. C, 23-Apr-18 Document Number: 76618 10 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000