Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. 78014

Diameters (In)

1) Component 1 4 X 1 COND

a) Conductor 26 (19/38) AWG Tinned Copper 0.020

2) Cable Assembly 4 Components Cabled

a) Twists: 12.0 Twists/foot (min)

b) Orientation: Components to be arranged from INSIDE

LAYER to OUTSIDE LAYER

c) Core Wrap Nonwoven Polyester Tape, 25% Overlap, Min.

3) Jacket 0.015" Wall, Nom.,Modified Polyphenylene

Ether-PE 0.116 (0.124 Max.)

a) Color(s) SLATE

b) Ripcord 1 End 810 Denier Nylon

c) Print

C(RU) AWM I A/B FT1 80C 300V

2) CSA International C(RU) AWM I A/B FT1 80°C / 300 VRMS

3) Other Halogen-Free

NFPA 79 - 2015 Compliant

4) CE: EU Low Voltage Directive 2014/35/EC

1) CE: EU Directive 2011/65/EU(RoHS2):

This product complies with European Directive 2011/65/EU (RoHS Directive) of the European

Parliament and of the Council of 8 June 2011and the amending Directive 2015/863/EU of 4 June

2015 . No Exemptions are required for RoHS Compliance on this item. Consult Alpha Wire's web

Physical & Mechanical Properties

1) Temperature Range -40 to 80°C

2) Bend Radius 10X Cable Diameter

3) Pull Tension 9.6 Lbs, Maximum

Electrical Properties (For Engineering purposes only)

1) Voltage Rating 300 VRMS

2) Capacitance 17.6 pF/ft @1 kHz, Nominal Conductor to Conductor

3) Inductance 0.18 µH/ft, Nominal

4) Conductor DCR 38 Ω/1000ft @20°C, Nominal

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications

described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not

ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or

implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,

even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out

of or in connection with the use, or inability to use, the information or specifications described herein.

ALPHA WIRE - CONFIDENTIAL AND PROPRIETARY

To Whom It May Concern:

Alpha Wire Part Number: 78014

78014 , RoHS-Compliant Commencing With 7/22/2014 Production

Note: all colors and put-ups

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European

Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous

substances used in the manufacture of electrical and electronic equipment. This certification extends to amending Directive 2015/863/EU which

expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The reader is referred to these Directives for the specific

definitions and extents of the Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed

part number is in compliance with China RoHS “Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014.

Polybrominated Diphenyl Ethers (PBDE) ,

Including Deca-BDE 0.1% by weight (1000 ppm)

Bis(2-ethylhexyl) phthalate (DEHP) 0.1% by weight (1000 ppm)

Butyl benzyl phthalate (BBP) 0.1% by weight (1000 ppm)

Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)

Diisobutyl phthalate (DIBP) 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its

release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or

the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is

for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual

Tel: 1-908-925-8000