MSS1048-683MLC - Coilcraft - Datasheet.Directory

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check web site for latest information.

Shielded Power Inductors

–

MSS1048

Document 462 -1

Document 462-1 Revised 03/31/16

DCR SRF Isat (A)4 Irms (A)5

Inductance2 max typ3 10% 20% 30% 20°C 40°C

Part number1 (µH) (m) (MHz) drop drop drop rise rise

MSS1048-801NL_ 0.8 ±30% 4.3 180 9.60 12.0 14.1 8.19 12.0

MSS1048-152NL_ 1.5 ±30% 5.1 90 5.44 7.80 10.5 7.41 10.8

MSS1048-222NL_ 2.2 ±30% 7.2 70 4.92 6.62 8.40 6.63 9.78

MSS1048-332NL_ 3.3 ±30% 10.0 50 4.62 6.32 7.38 5.04 7.22

MSS1048-472NL_ 4.7 ±30% 11.5 38 4.36 5.62 6.46 4.90 6.90

MSS1048-682NL_ 6.8 ±30% 16.3 35 3.60 5.00 5.94 4.52 6.01

MSS1048-822NL_ 8.2 ±30% 20.0 28 3.14 4.14 4.84 4.38 5.71

MSS1048-103ML_ 10 ±20% 23.0 24 3.08 3.84 4.32 3.99 4.79

MSS1048-153ML_ 15 ±20% 36.0 20 2.46 3.06 3.44 3.51 4.26

MSS1048-223ML_ 22 ±20% 50.0 12 2.36 2.90 3.28 2.86 3.58

MSS1048-333ML_ 33 ±20% 68.0 11 1.66 2.14 2.42 2.12 2.80

MSS1048-473ML_ 47 ±20% 120 10 1.44 1.86 2.20 1.83 2.42

MSS1048-563ML_ 56 ±20% 126 10 1.36 1.70 1.90 1.71 2.28

MSS1048-683ML_ 68 ±20% 176 7.0 1.28 1.60 1.70 1.39 1.88

MSS1048-823ML_ 82 ±20% 196 6.0 1.08 1.44 1.64 1.23 1.67

MSS1048-104ML_ 100 ±20% 224 6.0 0.99 1.20 1.36 1.09 1.48

MSS1048-154KL_ 150 ±10% 330 5.0 0.79 1.02 1.16 0.97 1.33

MSS1048-184KL_ 180 ±10% 360 4.5 0.75 0.92 1.02 0.89 1.24

MSS1048-224KL_ 220 ±10% 394 4.5 0.67 0.84 0.95 0.85 1.18

MSS1048-334KL_ 330 ±10% 748 3.0 0.57 0.69 0.76 0.57 0.82

MSS1048-474KL_ 470 ±10% 886 2.7 0.43 0.52 0.62 0.50 0.72

Designer’s Kit C409 contains 3 each of all values.

Core material Ferrite

Core and winding loss See www.coilcraft.com/coreloss

Terminations RoHS compliant matte tin over nickel over copper.

Other terminations available at additional cost.

Weight: 1.7 – 1.9 g

Ambient temperature –40°C to +85°C with (40°C rise) Irms current.

Maximum part temperature +125°C (ambient + temp rise). Derating.

Storage temperature Component: –40°C to +125°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reﬂows at

+260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited ﬂoor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Packaging 200/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide,

0.35 mm thick, 16 mm pocket spacing, 5.1 mm pocket depth

PCB washing Tested to MIL-STD-202 Method 215 plus an additional

aqueous wash. See Doc787_PCB_Washing.pdf.

1. Please specify termination and packaging codes:

MSS1048-334KLC

Termination: L = RoHS compliant matte tin over nickel

over copper.

Special order:

T = RoHS tin-silver-copper

(95.5/4/0.5) or S = non-RoHS tin-

lead (63/37).

Packaging: C = 7″ machine-ready reel. EIA-481

embossed plastic tape (200 parts

per full reel).

B = Less than full reel. In tape, but not

machine ready. To have a leader

and trailer added ($25 charge), use

code letter C instead.

D = 13″ machine-ready reel. EIA-481

embossed plastic tape. Factory

order only, not stocked (800 parts

per full reel).

2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc

using an Agilent/HP 4263B LCR meter or equivalent.

3. SRF measured using an Agilent/HP 4192A impedance

analyzer or equivalent.

4. DC current at 25°C that causes the speciﬁed induc-

tance drop from its value without current.

Click for temperature derating information.

5. Current that causes the speciﬁed temperature rise from

25°C ambient. This information is for reference only

and does not represent absolute maximum ratings.

Click for temperature derating information.

6. Electrical speciﬁcations at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components”

before soldering.

• 10 × 10.2 mm footprint; 4.8 mm high shielded inductors

• Very low DCR and excellent current handling

Sample

& buy

Support

& FAQ

Web

page

Tools &

softw

are

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check web site for latest information.

SMT Power Inductors – MSS1048

Document 462-2

Document 462-2 Revised 03/31/16

0.402 ±0.012

10,2 ±0,3

0.394 ±0.012

10,0 ±0,3

0.189 ±0.012

4,8 ±0,3

0.311

±0.012

7,9 ±0,3

0.051

±0.008

1,3 ±0,2 0.118 ±0.008

3,0 ±0,2

Recommended

Land Pattern

123

Dash

number

Internal

code

0.14

3,56

0.37

9,40

0.07

1,78

Parts manufactured prior

to Sept. 2007 were marked

with only the dash number.

Dimensions are of the case not including the termination.

For maximum overall dimensions including the termination,

add 0.005 in / 0,13 mm.

Typical L vs Current

0.1

100

1000

0.1 110010

Current (A)

Inductance (µH)

330 µH

33 µH

3.3 µH

0.8 µH

10 µH

100 µH

Typical L vs Frequency

0.1

100