SPEC NO: DSAF2719 REV NO: V.2 DATE: APR/25/2005 PAGE: 1 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000150-01
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
APSC03-41CGKWA-F01 GREEN
Description
The Green source color devices are made with InGaAlP on
GaAs substrate Light Emitting Diode.
SURFACE MOUNT DISPLAY
Features
0.3 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 1100PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAF2719 REV NO: V.2 DATE: APR/25/2005 PAGE: 2 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000150-01
Selection Guide
Part No. Dice Lens Type
Iv (ucd)
@ 10mA
Min. Typ.
APSC03-41CGKWA-F01 GREEN (InGaAIP) WHITE DIFFUSED 1900 11000 Common Cathode, Rt.
Hand Decimal
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Green 574 nm IF=20mA
λDDominant Wavelength Green 570 nm IF=20mA
∆λ1/2 Spectral Line Half-width Green 20 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VFForward Voltage Green 2.1 2.5 V IF=20mA
IRReverse Current Green 10 uA VR = 5V
Parameter Green Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
SPEC NO: DSAF2719 REV NO: V.2 DATE: APR/25/2005 PAGE: 3 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000150-01
Green APSC03-41CGKWA-F01
SPEC NO: DSAF2719 REV NO: V.2 DATE: APR/25/2005 PAGE: 4 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000150-01
Tape Specifications
(Units : mm)
Recommended Soldering Pattern
(Units : mm)
APSC03-41CGKWA-F01
Reel Dimension
SPEC NO: DSAF2719 REV NO: V.2 DATE: APR/25/2005 PAGE: 5 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000150-01
PACKING & LABEL SPECIFICATIONS APSC03-41CGKWA-F01
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
