CA713/4 - Altech - Datasheet.Directory

To put the finishing touch on your

application, we offer an extensive

selection of useful accessories to

build and install DIN Rail terminal

block assemblies and to facilitate

factory and field wiring.

Accessories include end stops, end

plates and partitions. Also offered

are DIN Rails, ferrules, jumpers

and more. From design to commis-

sioning and operation, Altech

accessories help you do the job

better.

We’ve tried to make the selection

of accessories as easy as possible.

The most common accessories are

listed together with their ordering

information on each terminal block

page in this catalog.

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com86

ACCESSORIES

TERMINAL BLOCKS

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 87

ACCESORIES

Altech accessories add the finishing touches to your terminal

block assemblies. End Stops prevent terminal blocks or other

components and devices from moving laterally on the rail.

End Plates close off the last terminal in a series, a vital func-

tion, since sectional terminal blocks are supplied with one side

open. Isolation partitions provide visual separation of terminal

groups, as well as electrical isolation between terminals of dif-

ferent potentials.

INTERCONNECTION

In addition, Altech offers a wide choice of both Internal and

External Jumpers to minimize wiring time and reduce installa-

tion cost. Available in standard 2, 3, 4 and 10 pole configura-

tions, or custom multipole jumpers. Our internal jumpers screw

directly into terminal block busbars.

External jumpers are available in straight-comb styles. They

may be used for terminal blocks without internal jumpering pro-

visions or in combination with internal jumpers.

MOUNTING

DIN Mounting Rails are internationally standardized and avail-

able in 35mm, 32mm and 15mm sizes, with or without perfora-

tions. These also accommodate a wide variety of control com-

ponents such as circuit breakers, timers, motor starters, relays,

switches, etc. The 15mm rail with miniature blocks is used

when space is at a premium.

MARKING TAGS

Marking Tags make DIN Rail assemblies easier to wire

and facilitate troubleshooting. Altech’s extensive termi-

nal block marking system includes standard or custom

printed push on tags in a variety of sizes for circuit

identification.

Terminal Block Accessories

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com88

Altech

TERMINAL BLOCK

ACCESORIES Isolation Partition

Separator Plate

Internal Jumper

End Plate

End Stop

DIN 35 mm

Mounting Rail

DIN 35-15 mm

Mounting Rail

DIN 32 mm

Mounting Rail

Isolated Internal Jumper

Shorting Screw

Shorting Sleeve

Current Bar

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 89

End Stop

Marking Tag

External Jumper

Support Bracket

Sample Terminal Block Assembly

showing all accessories

48mm

(1.89in)

M6 18mm

(.71in)

Ø7mm (.28in)

60mm (2.36in)

74mm (2.91in)

74mm(2.98 in.)

52mm(2.05 in.)

M6

18mm(.71in.)

H

Slot 6x15mm

(.24x.59 in.)

Ø6mm

(.24 in.)

DIN35 DIN35

Type

Perforated

Steel

Unperforated

Steel

Cat. No. Length Std. Pk.

2511120 2m 20

2511120/1M 1m 40

2511110 2m 20

2511110/1M 1m 40

Type

Perforated

Steel

Unperforated

Steel

Cat. No. Length Std. Pk.

CA701-15/S-2M 2m 10

CA701-15/S 1m 20

CA701-15-2M 2m 10

CA701-15 1m 20

DIN Mounting Rails

Altech DIN Rails comply with DIN

50045, 50022 and 50035 Standards.

DIN Rails have been accepted

throughout the world, allowing the

designer to mount a wide variety of

control components, devices, termi-

nal blocks, etc. on the same rail. The

use of DIN Rails enhances design

capabilities, saves space and reduces

labor.

Standard rails are made of steel with

zinc plating and chromate passivation

and are available in various configu-

rations.

DIN Rails are available in 35mm (7.5

and 15mm deep), 32mm and 15mm

widths and are supplied in 1 m (3'3")

and 2 m (6’6”) lengths. Upon request

they can be cut to custom lengths and

punched with holes or perforations.

• 35mm, 32mm, 15mm

• Perforated or unperforated

• Rail material is steel with electrolyt-

ic zinc plating

CA603 TSTW

Support Brackets

Support Brackets elevate DIN Rails

away from the panel to facilitate

component mounting and to

increase wiring access. Angled brack-

ets tilt the rail by 35° to improve visi-

bility. Straight brackets are available

in three heights for optimum posi-

tioning of the rail.

Brackets mount with 2 screws to any

panel or flat surface and have tapped

center holes for rail mounting.

Bracket material is steel, zinc plated

yellow chromated.

Height

1“

2”

3”

Cat. No. Std. Pk.

CA603 25

Suitable for all mounting rails

Cat. No. Std. Pk.

CA703 25

CA803 25

CA903 25

35 mm x

7.5 mm deep

35 mm x

15 mm deep

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com90

18

Terminal Block Accessories

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 91

DIN32 DIN15

MH2.5

Type

Perforated

Steel

Unperforated

Steel

Cat. No. Length Std. Pk.

2511160 2m 10

2511160/1M 1m 20

2511150 2m 10

2511150/1M 1m 20

Type

Perforated

Steel

Cat. No. Length Std. Pk.

CA601/S 1m 50

32 mm x

15 mm deep

15 mm x

5.5 mm deep

18

Cat. No. Handle for Std. Pk.

MH2.5 CTS2.5U-N 1

MH4

Cat. No. Handle for Std. Pk.

MH4 CTS4U-N 1

Mounting Handle

Mounting handle is used for mounting

10 terminal blocks on a DIN rail, thus

saving considerable time. Specially

designed pins in the mounting handle

grip the terminal blocks when pressed

against entry.

See page 8 for appropriate terminal blocks.

Terminal Block Accessories

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com92

Terminal Block Accessories

End Stops

End Stops prevent terminal

blocks and other DIN Rail mount

components and devices from

moving laterally on the rail. They

are available in polyamide 6.6

and metal configurations for

35mm, 32mm, and 15mm DIN

rails. CA102 and CA202 are large

endstops for heavy duty appli-

cations.

The CA103 is screwless and

ergonomically snaps into place,

saving costs and labor. It utilizes

two precisionally mounted

metal inserts that grip firmly

onto the DIN rail holding any

assembly into place.

Spacer / Separator

CASP is a DIN Rail mountable

spacer generally used for circuit

separation.

DIN Rail

Mounting Foot

CMTB-35 is used to assemble

components on a DIN rail.

Comes with pre-punched holes.

• Support bracket for DIN rail

mounting parts

• Hole Qty x dia., 4x4.3mm,

2x5.5mm

CA602

CA702 CA802

Material:

Polyamide 6.6

Dimensions

H x L x W:

20 x 28 x 8 mm

Cat. No. Std. Pk.

CA602 50

Suitable for:

15 mm

DIN Rails

Material:

Polyamide 6.6

Dimensions

H x L x W:

34 x 44 x 9 mm

Cat. No. Std. Pk.

CA702 50

Suitable for:

32 and 35 mm

DIN Rails

CA102 CA202

Material:

Polyamide 6.6

Dimensions

H x L x W:

46 x 50 x 9 mm

Cat. No. Std. Pk.

CA102 50

Suitable for:

32 and 35 mm

DIN Rails

Material:

Polyamide 6.6

Dimensions

H x L x W:

44.5 x 50 x 9.5 mm

Cat. No. Std. Pk.

CA202 25

Suitable for:

35 mm

DIN Rails

Material:

Polyamide 6.6

Dimensions

H x L x W:

32 x 45 x 8 mm

Cat. No. Std. Pk.

CA802 50

Suitable for:

35 mm

DIN Rails

Material:

Steel

Dimensions

H x L x W:

25 x 22.5 x 11.5 mm

Cat. No. Std. Pk.

CA502 50

Suitable for:

32 mm

DIN Rails

Material:

Steel

Dimensions

H x L x W:

27 x 39.5 x 16 mm

Cat. No. Std. Pk.

CA302 50

Suitable for:

35x7.5mm

DIN Rails

Material:

Polyamide

Dimensions

H x L x W:

41 x 35 x 6 mm

Cat. No. Std. Pk.

CA103 50

Suitable for:

35 mm

DIN Rails

Material:

Steel

Dimensions

H x L x W:

27 x 39.5 x 16 mm

Cat. No. Std. Pk.

CA402 50

Suitable for:

35x15 mm

DIN Rails

Material:

Polyamide 6.6

Dimensions

H x L x W:

54 x 55.5 x 6 mm

Cat. No. Std. Pk.

CDL4USP 50

Suitable for:

All

DIN Rails

Material:

Polyamide 6.6

Dimensions

H x L x W:

18 x 58 x 18 mm

Cat. No. Std. Pk.

CMTB-35 50

Suitable for:

Mounting Foot for

35 mm DIN rails

Material:

Polyamide 6.6

Dimensions

H x L x W:

29 x 43 x 8 mm

Cat. No. Std. Pk.

CASP 50

Suitable for:

All

DIN Rails

CASP

CA502

CA302 CA402

CA103

CMTB-35 CDL4U SPACER

CA103

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 93

Group Identification

GMH6, GMH7 & GMH8

To be mounted directly on Din Rails (GMH6 & GMH7). A marker card

needs to be inserted in the slot which is covered by a transparent

plastic sheet. (Blank marker and transparent sheet included).

Terminal Block Accessories

Group Marker,

shown imprinted and

attached to

CA 702

.

Blank and custom

printing available.

Cat. No. MTG1

END PLATES

End Plates

End plates are used to

cover the open side of sec-

tional DIN Rail mount ter-

minal blocks. They should

be used at the end of an

assembly of identical termi-

nal blocks or whenever

there is a change in the

physical size of the terminal

block.

• Material: polyamide 6.6

• Standard color: gray

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com94

Cat. No. Std. Dimensions Suitable for:

Pk. (H x L x W)

EP2.5/4UN 50 32 x 39 x 1.5 CTS2.5UN/4UN/CTT2.5UK/T/J/E

EP6/10U 50 31 x 42.5 x 1.5 CTS6U/CTS10U

EP25U 50 40 x 48 x 2 CTS25U

EP35 50 43 x 50 x 1.5 CTS35U

EPCMC1-2 50 35.5 x 46.5 x 2.5 CMC1-2

EPCMC2-2 50 40.5 x 65 x 2.5 CMC2-2

EPCDL4U 50 43 x 55 x 2.4 CDL4U/CDL4U(I.S)/ CDL4U(E) Series

EPODL4U 50 49 x 68 x 5.5 ODL4U/ODL4UA(Front Side)

EP1ODL4U 50 24 x 68 x 3 ODL4U/ODL4UA(Back Side)

EPCTL2.5U 50 55.5 x 84 x 1.5 CTL2.5U/2.5UL/2.5U(I.S)

EPCTL2.5UH 50 55.5 x 61 x 1.5 CTL2.5UH/2.5UH(L)/2.5UH(I.S)D2

EPCMT4 50 22.5 x 27 x 1.5 CMT4/CMT4S/CMT4SU

EPCMB4 50 27 x 27 x 7 CMB4

EPCSFL4U 50 28 x 55.5 x 1.6 CSFL4U/4U(L)/CSDL4U

EPCSFL6U 50 42.5 x 36 x 1.5 CSFL6U/CSDL6U

EPCAFL4U 25 32 x 72 x 1.5 CAFL4U/4UL/4UN

EPDDFL4U 25 49 x 87.6 x 3 DDFL4U/4ULR/4U(E)/4U(E)LR

EPCDTTU 50 41 x 63 x 3 CDTTU/CDTTUSH

EPCKT4U 50 30.5 x 46.5 x 2.5 CKT4U

EPCGT4U 50 40.5 x 43 x1 CGT4U

EPCTC4U 50 34.5 x 47 x 2.5 CTC4U

EPCSTSN5U 50 31 x 50 x 1.5 CSTSN4U/N5U/N6U/B4U/B5U

EPSTH4 50 39.5 x 46 x 1.5 STH4

EPSTH4DT 50 37.5 x 86 x 1.5 STH4DT / STH4DTSH

EPCSC2.5T 50 23 x 58 x 1.5 CSC2.5T/CSCG2.5T

EPCSC4T 50 28 x 65 x 1.5 CSC4T/CSCG4T

EPCSC6T 50 32 x 72 x 2 CSC6T/CSCG6T

EPCSC10T 50 37.5 x 75 x 1.5 CSC10T/CSCG10T

EPCSC16T 50 82 x 38 x 1.5 CSC16T/CSCG16T

EPCSCP2.5T(L&R) 25 27.5 x 35 x 5 CSCP2.5T/CSCP2.5T2

EPCSC2.5T1-2 50 27 x 74 x 1.5 CSC2.5T1-2

EPCSC2.5T2-2 50 25 x 90 x 1.5 CSC2.5T2-2/CSC2.5T/4(E)D3

EPCSC4T1-2 50 28.5 x 84.5 x 1.5 CSC4T1-2

EPCSC4T2-2 50 28.5 x 105 x 1.5 CSC4T2-2

EPCSC6T1-2 50 94 x 30 x 1.5 CSC6T1-2

EPAS2.5 50 35 x 54 x 1.5 AS2.5, 2.5/3, 2.5/4, AGT2.5, 2.5/3, 2.5/4

EPAS4 50 27.5 x 61 x 1.5 AS4, 4/3, 4/4, AGT4, 4/3, 4/4

EPAS6 50 33.5 x 74 x 1.5 AS6, 6/3, AGT6, 6/3

EPASF4 50 37 x 86 x 1.5 ASF4/ASF4L

EPADL2.5 50 43.5 x 80 x 1.5 ADL2.5/ADL2.5(E)D1/D2

EPADLG2.5 50 83.8 x 58 x 1.2 ADLG2.5

EPADL2.5 50 100 x 69.7 x 1.2 ATL2.5

EPATL2.5H 50 77.3 x 69.7 x 1.2 ATL2.5H

EPATLG2.5 50 100 x 68.8 x 1.2 ATLG2.5

EPCDL4UN 50 47.5 x 57 x 1.5 CDL4UN/CDL4UN(I.S)

EPCDLG2.5 50 48 x 71.4 x 1.2 CDLG2.5

EPCTLG2.5 50 62.5 x 87.5 x 1.2 CTLG2.5

EPCKT4U/4 50 65 x 38.3 x 1.5 CKT4U/4

EPCDS6U 50 37.2 x 82 x 1.5 CDS6U/6UTS/6UFT/6USC

EPUSC 50 52 x 48.5 x 1.5 CHV4U/6U/10U

Terminal Block Accessories

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 95

PARTITIONS

Isolation Partitions

Isolation partitions provide

separation between termi-

nal blocks with different

potentials. When used for

DC power applications,

voltages of up to ± 600V DC

can be used on either side

of the isolation partition.

They also provide visual

separation between groups

of blocks.

• Material: polyamide 6.6

• Standard color: gray

Separator Plates

Used for electrical separa-

tion of adjacent jumpers.

They can be inserted after

the terminal blocks have

been assembled on DIN

rail. There is no loss of

width.

Protective Cover /

Side Holding Plates

For protection against dust and

shock, transparent protective

cover can be installed above

the terminal block assembly

with the aid of side/holding

plates. The side holding plates

can be fitted on 35 mm and 32

mm Din rails. These plates

should be backed by standard

end stops.

SEPARATOR PLATES

CTSPC CSP1

150 mm*

For all Rail Mounting Terminals

*Other lengths available on request.

Mounting Accessories

for CTSPC

Assembled Block installed

with Protective Cover

Cat. No. Std. Dimensions Suitable for:

Pk. (H x L x W)

PP2.5/4UN 50 37 x 44 x 1.6 CTS2.5UN/4UN/CTT2.5UK/T/J/E

PP6/10U 50 37.5 x 56.5 x 1.5 CTS6U/CTS10U

PP25U 50 46.5 x 62 x 1.5 CTS25U

PP25UN 50 42.5 x 62 x 1 CTS25UN

PP35U 50 50 x 64.5 x 1.5 CTS35U

PP35UN 50 50 x 64.5 x 1 CTS35UN

PPCMT4 50 32.5 x 37 x 1.6 CMT4/CMT4S/CMT4SU

PPCSFL4U 50 42.5 x 62 x 1.5 CSFL4U/4U(L)/CSDL4U

PPCSC2.5T 50 28 x 58.7 x 1.5 CSC2.5T/CSCG2.5T

PPCSC4T 50 33 x 65 x 1.5 CSC4T/CSCG4T

PPCSC6T 50 36.5 x 72 x 2 CSC6T/CSCG6T

Cat. No. Std. Dimensions Suitable for:

Pk. (H x L x W)

SP2.5/4UN 100 17.5 x 17.4 x 1.4 CTS2.5UN/4UN/CTT2.5UK/T/J/E

SP6/10U 100 15.4 x 16.2 x 1.5 CTS6U/CTS10U/16U

SPCDL4U 100 15.4 x 16.2 x 1.6 CDL4U/CDL4U(I.S)/ CDL4U(E) Series

SPCMB4 100 14.5 x 12 x 1.5 CMB4

SPCDLG2.5 100 11 x 10.5 x 1 CDLG2.5

Terminal Block Accessories

INTERNAL JUMPER

1

Internal Jumpering System not

available.

2

100 pole strip can be broken down to

any number of poles desired.

Jumpering System

The jumpering systems bus poten-

tials between terminal blocks, reduc-

ing wiring time. Adjacent blocks or

selective terminal blocks within an

assembly can be easily interconnect-

ed, leaving terminal clamps free for

wiring. Purchase complete assem-

blies, which are ready for installation,

or select individual components to

create custom or extra long jumpers.

Jumper ampacity is lower than the

rated current of the respective termi-

nal blocks, therefore, applied current

must not exceed the maximum cur-

rent value of the block. Internal

jumpers may be used in combination

with external jumpers to achieve

additional jumpering possibilities.

Internal Jumper Assemblies

Internal Jumper Assemblies consist of a

Current Bar, Shorting Sleeves and

screws. They install easily into the center

of the terminal block and connect to the

current bar. They are available as stan-

dard 2, 3, 4 or 10 pole assemblies and

are ready for immediate installation.

Insulated internal jumpers provide shock

protection when installed on terminal

block assemblies.

External Jumper

External Jumpers bus potentials

between terminal blocks, reducing

wiring time. Adjacent or selected

blocks within an assembly can be

easily interconnected. Jumper poles

may be removed for selective

jumpering. Jumpers are insulated

and available in 2, 3, 4 and 10 pole

versions. They are made of tin plated

brass/copper.

Current Bars

Current Bars are offered to create

custom jumper assemblies for

increased number of poles or custom

jumpers. Select the current bar with

the required number of poles, or field

cut them to the required length. They

are made of tin or nickel plated cop-

per or brass.

Shorting Sleeves & Screws

Shorting Sleeves & Screws ensure

reliable and mechanically safe elec-

trical connections between current

bars and the terminal block current

bars. One shorting sleeve is required

for each jumpered terminal. They are

made of nickel plated brass.

Cat. No. Torque Std. Pk.

CA721/2 0.4 Nm 100

CA721/3 100

CA721/4 100

CA721/10 10

CA721/100 10

CA722/2 0.4 Nm 100

CA722/3 100

CA722/4 100

CA722/10 10

CA722/100 10

CA723/2 0.5 Nm 100

CA723/3 50

CA723/4 50

CA723/10 10

CA724/2 0.5 Nm 100

CA724/3 50

CA724/4 50

CA724/10 10

CA751/2 0.8 Nm 50

CA751/3 50

CA751/4 50

CA751/10 10

CA725/2 0.8 Nm 50

CA725/3 20

CA725/4 20

CA725/10 10

CA726/2 0.8 Nm 50

CA726/3 20

CA726/4 20

CA726/10 10

CA771/2 0.8 NM 50

CA771/3 20

CA771/4 20

CA771/10 10

CA727/2 0.4 Nm 100

CA727/3 100

CA727/4 100

CA727/10 10

CA729/2 0.5 Nm 100

CA729/3 50

CA729/4 50

CA729/10 10

CA722/2 0.4 Nm 100

CA722/3 50

CA722/4 50

CA722/10 20

CA722/100 20

INSULATED INTERNAL JUMPER

Cat. No. Torque Std. Pk.

CA741/2 0.4 Nm 100

CA741/3 100

CA741/4 100

CA741/10 10

CA741/100 10

CA742/2 0.4 Nm 100

CA742/3 100

CA742/4 100

CA742/10 10

CA742/100 10

CA743/2 0.5 Nm 100

CA743/3 50

CA743/4 50

CA743/10 10

CA744/2 0.5 Nm 100

CA744/3 50

CA744/4 50

CA744/10 10

CA761/2 0.8 Nm 50

CA761/3 50

CA761/4 50

CA761/10 10

CA745/2 0.8 Nm 50

CA745/3 20

CA745/4 20

CA745/10 10

CA746/2 0.8 Nm 50

CA746/3 20

CA746/4 20

CA746/10 10

CA781/2 0.8 NM 50

CA781/3 20

CA781/4 20

CA781/10 10

CA747/2 0.4 Nm 100

CA747/3 100

CA747/4 100

CA747/10 10

CA749/2 0.5 Nm 100

CA749/3 50

CA749/4 50

CA749/10 10

Terminal Series Poles

CTS2.5UN 2

3

4

10

1002

CTS4UN 2

CMC1-2 3

CMC2-2 4

CTS4UTM 10

CKT4U 1002

CDL4UN 10 (breakable)

CTS6U 2

CDTTU13

CDTTU-SH14

CSDL6U1100

CSFL6U1

CTS10U 2

3

4

10

CTS16U 2

3

4

10

CTS25U 2

3

4

10

CTS35U 2

3

4

10

CTS35UN* 2

3

4

10

CMT4 2

CMT4S 3

CMB4 4

CDL4U 10

CDL4U(I.S) 1002

ODL4U 10 (breakable)

CDL4UTM

DDFL4U 2

DDFL4U(E) 3

DDDL4U 4

CSFL4U110

CSFL4U(L)1

CSDL4U

CAFL4U 2

CAFL4U(L)13

4

10

CTL2.5U 2

CTL2.5UH 3

CTL2.5UL 4

CTL2.5UHL 10

CTL2.5U(I.S) 1002

10 (breakable)

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com96

Screw Clamp Terminal Block Accessories

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 97

EXTERNAL JUMPER

Cat. No. Torque Std. Pk.

CA717/2 0.4 Nm 100

CA717/3 100

CA717/4 100

CA717/10 20

CA714/2 0.5 Nm 100

CA714/3 100

CA714/4 100

CA714/10 20

CA710/2 0.8 Nm 100

CA710/3 50

CA710/4 50

CA710/10 20

CA718/2 0.8 Nm 100

CA718/3 50

CA718/4 50

CA718/10 20

CA714/2 0.5 Nm 100

CA714/3 100

CA714/4 100

CA714/10 20

CA711/2 0.8 Nm 100

CA711/3 50

CA711/4 50

CA711/10 20

CA716/2 0.8 Nm 50

CA716/3 50

CA716/4 50

CA716/10 20

CA715/2 0.4 Nm 100

CA715/3 100

CA715/4 100

CA715/10 20

CURRENT BAR

Cat. No. Std. Pk.

CA703/01 100

CA704/01 100

CA705/01 100

CA731/10 100

CA731/100 10

CA703/1 100

CA704/1 100

CA705/1 100

CA732/10 10

CA732/100 100

CA703/2 100

CA704/2 100

CA705/2 100

CA733/10 100

CA703/3 100

CA704/3 100

CA705/3 100

CA734/10 100

CA703/8 100

CA704/8 100

CA705/8 100

CA739/10 100

CA703/4 100

CA704/4 100

CA705/4 100

CA735/10 100

CA703/5 100

CA704/5 100

CA705/5 100

CA736/10 100

CA703/10 100

CA704/10 100

CA705/10 100

CA770/10 100

CA703/1 100

CA704/1 100

CA705/1 100

CA732/10 100

CA732/100 10

CA732/10-A 100

CA703/6 100

CA704/6 100

CA705/6 100

CA737/10 100

CA703/1 100

CA704/1 100

CA705/1 100

CA732/10 100

CA732/100 10

CA732/10-A 100

SHORTING SLEEVE & SCREWS

Cat. No. Torque Std. Pk.

CA707/S/Q/01 0.4 Nm 100

CA707/S/Q/1 0.5 Nm 100

CA707/S/Q/5 0.8 Nm 100

CA707/S/Q/2 0.8 Nm 100

CA707/S/Q 0.4 Nm 100

CA707/S/Q/3 0.5 Nm 100

CA707/S/Q/01 0.4 Nm 100

Screw Clamp Terminal Block Accessories

Cat. No. Std. Pk.

CA801/1 100

CA801/2 100

CA801/3 100

CA801/4 100

CA801/1 100

CA801/2 100

CA801/3 100

CA803/1 100

CA801/1 100

CA801/7 100

Terminal

CSC2.5T

CSC4T

CSC6T

CSC10T

CSC2.5T1-2

CSC2.5T2-2

CSC4T1-2

CSC4T2-2

CSC6T1-2

CSCP2.5T

CSCP2.5T2

ADL2.5

ASF4

Cat. No. Std. Pk.

CA801/1-3 100

CA801/2-3 100

CA801/3-3 100

CA801/1-3 100

CA801/2-3 100

CA801/3-3 100

CA801/1-3 100

Cat. No. Std. Pk.

CA901/1 100

CA901/2 100

CA901/3 100

CA901/1 100

CA901/2 100

CA901/3 100

CA901/1 100

Wire Type Jumper For adjacent jumperingFor alternate jumpering

ADJACENT JUMPERALTERNATE JUMPER WIRE TYPE JUMPER

Step Down

Jumpers

Used for jumpering

different size blocks.

Terminal

CSC6T –

CSC4T

CSC6T –

CSC2.5T

CSC4T –

CSC2.5T

Cat. No. Std. Pk.

CA901/4 100

CA901/5 100

CA901/6 100

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com98

Screw Clamp Terminal Block Accessories

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 99

EXTENDED / DIRECT HANDLE

MOTOR DISCONNECT SWITCH

EXTENDED / DIRECT HANDLE

ACCESSORIES

TOGGLE HANDLE

MOTOR DISCONNECT SWITCH

POLYCARBONATE ENCLOSED

MOTOR DISCONNECT SWITCHES &

FUSED ENCLOSED

MOTOR DISCONNECT SWITCH (30A)

STAINLESS STEEL ENCLOSED

MOTOR DISCONNECT SWITCHES

SHEET METAL ENCLOSED

MOTOR DISCONNECT SWITCHES

ALUMINUM ENCLOSED

MOTOR DISCONNECT SWITCHES

• One of the smallest 60A switches in the industry

• Advanced switch technology (use of silver

contacts ensures safe and durable operation)

•Across the line, motor starting - up to 75hp/600V

•General Use Rating - 16A to 150A/600V

•Available as rotary switches for extended or direct handle

applications

•Toggle switches

•Non-fused switch

•Short Circuit Withstand Rating of 10kA with back-up fuse

•DIN Rail and panel mount available

•Comprehensive range of accessories

•Snap on auxiliary contacts

•Enclosed switches with NEMA Type 4X rating

•Operating temperature is -20°C to +40°C

AC Motor Across-The-Line

AC General Use

E185115

Altech MOTOR DISCONNECT SWITCHES

UL60947-4-1A

UL60947-4-1A (Formerly UL508)

(Formerly UL508)

Listed Manual Motor

Controllers

with Disconnecting Means

FEATURES AND BENEFITS:

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com100

Fuses

38 mm

(1.5 in.)

Ø10.3 mm

(0.4 in.)

6 mm

(0.24 in.)

6 mm

(0.24 in.)

10.5 mm

(0.4 in.)

10.5 mm

(0.4 in.)

10x38

6 2625005 30 1.5 10

8 2625006 50 2 10

10 2625007 70 2.5 10

12 2625008 120 3 10

16 2625009 150 3.5 10

20 2625011 260 4.8 10

25 2625013 290 6 10

32 2625015 600 7.5 10

**6-25A (700V DC/ breaking capacity ––

--- 50kA)

32A (400V DC/ breaking capacity ––

--- 50kA)

Operating Power

In Cat. No. I2-value Dissipation Std. Pk.

(A) (A’s) (W)

Rated Current/

Rated Voltate Cat. No. Std. Pk.

0.5A 2620017 10

1A 2620000 10

2A 2620001 10

4A 2620003 10

6A 2620005 10

8A 2620006 10

10A 2620007 10

12A 2620008 10

16A 2620009 10

20A 2620011 10

25A 2620013 10

32A* 2620015 10

*400V

Rated Current/

Rated Voltate Cat. No. Std. Pk.

0.5A 2621017 10

1A 2621000 10

2A 2621001 10

4A 2621003 10

6A 2621005 10

8A 2621006 10

10A 2621007 10

12A 2621008 10

16A 2621009 10

20A 2621011 10

25A 2621013 10

32A* 2621015 10

*400V

Cylinder Fuses are typically used in

industrial applications to protect electri-

cal devices such as motors, drives, etc.

They are available in four sizes with a

current range from 1 to 125 Amps.

Cylinder Fuses have metal caps at both

ends, and a porcelain fuse body.

OPERATING CLASSES

gL/gG - Line Protection

Slow, typically used for distribution cir-

cuits or resistive loads.

Typical Markings: gL/gG

aM - Motor Protection

Fast acting short circuit protection,

but slow acting overload protection.

Typical Marking: aM

aR - Semiconductor Protection

Partial range, short circuit protection

for devices such as diodes, SCRs. etc.

Typical Markings: Ultra Rapid™,

Sitor™, Silcu™, Protister™, Recticur™,

Ultra Quick™, aR

Note:

Other fuse sizes and fuse holders

are available. Please refer to the

Altech European Fuse catalog for

more information.

gL/gG - Line Protection

Standard: IEC 20269-4-1

and IEC60269-1

Rated Voltage: 500V

aM - Motor Protection

Standard: IEC 20269-4-1

and IEC60269-1

Rated Voltage: 500V

aR - Semiconductor Protection

Standard: IEC 60269-4-1

Breaking Capacity: ~200 kA

Rated Voltage: ~600V**

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 101

Voltage 250V AC/DC

DIN 41662 DIN 41571-2 DIN 41661

IEC-127-2/III IEC-127-2/II

Cat. No.

Slow Medium Fast

0.02M5x20M

0.032M5x20M

0.05M5x20T40.05M5x20M 0.05M5x20F4

0.063M5x20M

0.08M5x20T40.08M5x20M

0.1M5x20T40.1M5x20M 0.1M5x20F4

0.125M5x20T40.125M5x20M 0.125M5x20F4

0.16M5x20T40.16M5x20M 0.16M5x20F4

0.2M5x20T40.2M5x20M 0.2M5x20F4

0.25M5x20T40.25M5x20M 0.25M5x20F4

0.315M5x20T40.315M5x20M 0.315M5x20F4

0.4M5x20T40.4M5x20M 0.4M5x20F4

0.5M5x20T40.5M5x20M 0.5M5x20F4

0.63M5x20T40.63M5x20M 0.63M5x20F4

0.7M5x20T40.7M5x20M 0.7M5x20F4

0.8M5x20T40.8M5x20M 0.8M5x20F4

1.0M5x20T41.0M5x20M 1.0M5x20F4

1.25M5x20T41.25M5x20M 1.25M5x20F4

1.4M5x20T41.4M5x20M

1.6M5x20T41.6M5x20M 1.6M5x20F4

2.0M5x20T42.0M5x20M 2.0M5x20F4

2.5M5x20T42.5M5x20M 2.5M5x20F4

3.15M5x20T43.15M5x20M 3.15M5x20F4

4.0M5x20T44.0M5x20M 4.0M5x20F4

5.0M5x20T45.0M5x20M 5.0M5x20F4

6.3M5x20T46.3M5x20M 6.3M5x20F4

8.0M5x20T18.0M5x20M 8.0M5x20F1

10.0M5x20T110.0M5x20M 10.0M5x20F1

12.5M5x20T112.5M5x20M112.5M5x20F1

16.0M5x20T116.0M5x20M116.0M5x20F1

20.0M5x20T120.0M5x20M120.0M5x20F1

Std. Pk. 10

Voltage 250V AC/DC

Cat. No.

Slow Fast

0.032M6.3x32T

0.04M6.3x32T

0.05M6.3x32T40.05M6.3x32F

0.063M6.3x32T40.063M6.3x32F

0.08M6.3x32T40.08M6.3x32F

0.1M6.3x32T40.1M6.3x32F

0.125M6.3x32T40.125M6.3x32F

0.16M6.3x32T40.16M6.3x32F

0.2M6.3x32T40.2M6.3x32F

0.25M6.3x32T40.25M6.3x32F

0.315M6.3x32T40.315M6.3x32F

0.4M6.3x32T40.4M6.3x32F

0.5M6.3x32T40.5M6.3x32F

0.63M6.3x32T40.63M6.3x32F

0.7M6.3x32T40.7M6.3x32F

0.8M6.3x32T40.8M6.3x32F

1.0M6.3x32T41.0M6.3x32F4

1.25M6.3x32T41.25M6.3x32F4

1.6M6.3x32T41.6M6.3x32F4

2.0M6.3x32T42.0M6.3x32F4

2.5M6.3x32T42.5M6.3x32F2,4

3.15M6.3x32T43.15M6.3x32F2,4

4.0M6.3x32T44.0M6.3x32F2,4

5.0M6.3x32T45.0M6.3x32F3,4

6.3M6.3x32T46.3M6.3x32F3,4

7.0M6.3x32T47.0M6.3x32F3

8.0M6.3x32T48.0M6.3x32F3

10.0M6.3x32T410.0M6.3x32F3

12.5M6.3x32T412.5M6.3x32F3

16.0M6.3x32T416.0M6.3x32F3

20.0M6.3x32T420.0M6.3x32F3

Std. Pk. 10

Voltage 250V AC/DC

DIN 41571-2

Cat. No.

Medium

0.032M5x25M

0.04M5x25M

0.05M5x25M

0.063M5x25M

0.08M5x25M

0.1M5x25M

0.125M5x25M

0.16M5x25M

0.2M5x25M

0.25M5x25M

0.315M5x25M

0.4M5x25M

0.5M5x25M

0.63M5x25M

0.8M5x25M

1.0M5x25M

1.25M5x25M

1.6M5x25M

2.0M5x25M

2.5M5x25M

3.15M5x25M

4.0M5x25M

5.0M5x25M

6.3M5x25M

8.0M5x25M1

10.0M5x25M1

16.0M5x25M1

Std. Pk. 10

Miniature Fuses are typically

used to protect electronic

devices, laboratory and meas-

urement instruments, stereos,

TV’s, VCR’s etc. They are available

in four sizes with a current range

of 20mA to 20 Amps. Miniature

Fuses are manufactured accord-

ing to VDE 0820 part 1, VDE 0820

part 2, IEC publication 127, CEE

publication 4 and actual DIN

standards.

The 5x20, 5x25 fuses can be used

in the CSFL4U series terminal

blocks. The 6.3x32 fuse can be

used in the CAFL4U series termi-

nal blocks.

Operating Class:

Slow, Typical Marking: “T”

Medium, Typical Marking: “M”

Fast, Typical Marking: “F”

1Not standard rating.

2Rated Voltage 150V.

3Rated Voltage 60V.

4UL recognized version

available upon request.

5 X 20 5 X 25 6.3 X 32 (1/4” X 1-1/4”)

Current

20mA

32mA

40mA

50mA

63mA

80mA

100mA

125mA

160mA

200mA

250mA

315mA

400mA

500mA

630mA

700mA

800mA

1.0A

1.25A

1.4A

1.6A

2.0A

2.5A

3.15A

4.0A

5.0A

6.3A

7.0A

8.0A

10.0A

12.5A

16.0A

20.0A

Miniature Fuses

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com102

Printed Circuit Board Width

Track Type High Guide (HG)

MTGTK1 73 ± 1mm (2.9 ± 0.05 in.)

MTGTK2 110 ± 1mm (4.3 ± 0.05 in.)

Mounting Track Extrusion

"Cut-to-Size" Formula

Extrusion Length = Printed Circuit

Board Length – 4.5mm (.175 in.)

Sizing Information

Narrow Mounting Track

Extrusion and Components

Cat. No. Std. Pk.

MTGTK1/1M 5

MTGTK1 5

MTGTK1/1M/G 5

MTGTK1/G 5

EPDR1 100

EPDR1/G 100

MTGF1 100

MTGF1/G 100

EPDP1 100

EPDP1/G 100

EPS 200

MT2 100

Mounting Track

1 meter, grey

2 meter, grey

1 meter, green*

2 meter, green*

Accessories

DIN Rail Mount End Section, grey

DIN Rail Mount End Section, green*

DIN Rail Mounting Foot, grey

DIN Rail Mounting Foot, green*

Panel Mount End Section, grey

Panel Mount End Section, green*

DIN Rail / Panel Mount End Section

Screws #4x1/2”, Phillips Pan head

(2 required per end section)

Marking Tags

MTGF1

EPDR1

EPS

MTGTK1

For PC Board Widths 73mm (2.9 in.)

W

L

Mount standard or custom printed circuit

boards in Mounting Tracks which can be

conveniently DIN rail or panel mounted in

your control panel or cabinet. These are the

same tracks used for Altech interface mod-

ules. We now make them available to you to

house and protect your custom boards, etc.

Tracks are easily cut to size or can be

ordered precut to specific lengths. They are

easily assembled from standard components

and snap onto 35mm DIN rail or can be panel

mounted.

Each track has two sets of printed circuit

board guides to accept two alternate board

widths.

End Sections hold printed circuit boards

securely in place and keep out foreign

objects.

MOUNTING

When mounting extrusions on DIN rail, order

two or more DIN Rail mounting feet. These

feet slide into grooves on the extrusion. Then

attach two DIN Rail Mount End Sections

with help of EPS screws.

To panel mount, order two Panel Mount End

Sections (and EPS screws), each with an

integral mounting flange with a 6 x 8mm (.24

x .32 in.) hole slot.

If desired, tracks can be direct mounted

using double sided tape. Order two DIN rail

mount end sections (and EPS screws).

• Standard Lengths: 1m (3'-3") or 2m (6'-6")

• Track Material: PVC

• Temperature Limit:

Short Term - 80°C (176°F)

Continuous - 70°C (158°F)

• End Section, Foot Material: Polyamide

• Preassembled, Precut Lengths Available

• Tracks Accept Standard MT2 Marking Tags

* Green color available on request.

Contact Altech for more information.

PCB Mounting Tracks

Panel

Mount DIN Rail

Mount

Panel

Mount

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 103

aAlso applies for DIN Rail Mount Unit

Wide Mounting Track

Extrusion and Components

Cat. No. Std. Pk.

MTGTK2/1M 5

MTGTK2 5

MTGTK2/1M/G 5

MTGTK2/G 5

EPDR2 100

EPDR2/G 100

MTGF2 100

MTGF2/G 100

EPDP2 100

EPDP2/G 100

EPS 200

MT2 100

For PC Board Widths 110mm (4.9 in.)

W

L

EPDR2

EPDP2

MTGTK2

PCB Mounting Tracks

DIN Rail

Mount

73

69

16

84

2

35

15

82

PCB MOUNTING TRACK (73 mm)

DIN RAIL MOUNTING FOOT (73mm)

11.4

110

16

119

2

35

15

117

PCB MOUNTING TRACK (110 mm)

DIN RAIL MOUNTING FOOT (110mm)

11.4

Narrow Mounting Track

Wide Mounting Track

MTGF2

EPS

WALL MOUNT DIN RAIL MOUNTPANEL MOUNT

36.5 x 61.5 x 50

10 mm

Thermoplastic

3 screw clamps

125 V

15 A

Cat. No. Std. Pk.

PMRBU 1

PMRGR 1

PMRBA 1

SEALGASK 1

58.5 x 84 x 53.5

10 mm

Thermoplastic

3 screw clamps

125 V

15 A

Cat. No. Std. Pk.

DMRBU 1

DMRGR 1

DMRBA 1

Includes Sealing Gasket

50 x 71 x 53.5

10 mm

Thermoplastic

3 screw clamps

125 V

15 A

Cat. No. Std. Pk.

WMRBU 1

WMRGR 1

WMRBA 1

Includes Sealing Gasket

Features:

• DIN Rail, Panel Mount

or Wall Mount

• Rating: 15A/125V AC

• Finger Protection: IP54

• Available in 3 colors.

External Dimension (HxWxL mm)

Stripping Length

Insulation Material

Type of Connection

Approvals

*

Voltage Rating

Current Rating

Complete Kit:

Blue

Gray

Black

Optional Accessory

Sealing Gasket

for Panel Mount Receptacles

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com104

*UL approval applies to outlet only, not enclosure or DIN rail clip.

E154664 E154664 E154664

Receptacles

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 105

PANEL MOUNT

WALL MOUNT

DIN RAIL MOUNT

Wiring of

Receptacles

1

1Optional Sealing Gasket for wet environments.

Receptacles

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com106

Altech Universal Digital Multi-Timer

Features

• Multifunctional Timer (8 or 18 Functions)

• Universal Voltage 24~265 VAC/ DC

• Wide Time Range: 0.1s ~ 999h

• 3 Digit LCD Display for Preset Time and Run Time

• DIN Rail Mounted

• 17.5mm Width

E351145

Altech’s AMT-Series of Universal Digital Multi-Timers comprises 4

models featuring 8 or 18 timer functions to offer highest flexibility

in controlling operations. The time range is adjustable from 0.1s to

999h. An LCD display shows current Run time information.

Digital Timers

Cat. No. AMT8-S1 AMT8-D2 AMT12-S1 AMT12-D2

Output Contacts 1 C/O 2 NO 1 C/O 2 NO

Functions [setting mode] 8818 18

1) ON Delay [A] 1) ON Delay [0]

2) Cyclic OFF/ ON [b] 2) Cyclic OFF/ ON [1]

3) Cyclic ON/ OFF [C] 3) Cyclic ON/ OFF [2]

4) Signal ON/ OFF [d] 4) Impulse on Energizing [3]

5) Signal OFF Delay [E] 5) Accumulative Delay on Signal [4]

6) Interval [F] 6) Accumulative Delay on Inverted Signal [5]

7) Signal OFF/ ON [G] 7) Accumulative Impulse on Signal [6]

8) One Shot Output [H] 8) Signal ON Delay [7]

9) Inverted Signal ON Delay [8]

10) Signal OFF Delay [9]

11) Impulse ON/ OFF [A]

12) Signal OFF/ ON [b]

13) Leading Edge Impulse 1 [C]

14) Leading Edge Impulse 2 [d]

15) Trailing Edge Impulse 1 [E]

16) Trailing Edge Impulse 2 [F]

17) Delayed Impulse [G]

18) Inverted Signal ON Delay 2 [G]

LISTED

Specifications

Supply Voltage 24 - 265 VAC/ DC (50, 60Hz)

Power Consumption 10 VA max.

Timing Range 0.1s ~ 999h

Reset Time 200ms max.

Repeat Accuracy +-0.5%

Output Contact Rating 8A @ 240 VAC/ 24 VDC (resistive)

Electrical Life 10,000 switching cycles

Mechanical Life 2,000,000 switching cycles

AC-15 Rating Rated Voltage (Ue): 125/ 240V, Rated Current (Ie): 3/1.5A

DC-13 Rating Rated Voltage (Ue): 125/ 250V, Rated Current (Ie): 2/0.22/0.1A

Operating Temperature -10ºC ~ +55ºC (+14ºF ~ 131ºF)

Storage Temperature -20ºC ~ +65ºC (-4ºF ~ 149ºF)

Weight 85g (0.14lb.)

Protection Enclosure IP30

Protection Terminals IP20

Torque 0.40 Nm (3.5 lb.in.)

Terminal Wire Size 0.3-2.5 mm2(22-14 AWG)

Dimensions

Connection Diagrams

AMT8-S1, AMT12-S1 AMT8-S2, AMT12-S2

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 107

Altech Universal Digital Multi-Timer

Functional Diagrams for AMT12-S1 and AMT12-D2

Functional Diagrams for AMT8-S1 and AMT8-D2

Mouser Electronics
  
Authorized Distributor
 
  
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
 
 
 
 Altech:   
  EPCSCP2.5T  MT6/V-24V  CA718/10  EPCSC6T  EPCSC4T  CA702  CA713/4  CA713/2  CA713/3  CA711/3 
CA711/4  CA711/2  MT2/H-31-40  CA715/4  CA715/2  CA714/2  CA714/3  CA714/4  SP2.5/4UN  EP2.5/4UN  SPCMB4
  CA716/10  CA710/2  CA710/3  CA725/10  PP2.5/4UN  EPCTL2.5U  CA718/2  CA718/3  CA801/1-3  EPDDFL4U 
CA716/3  CA716/2  CA716/4  2511160/1M  CA724/10  PPCSFL4U  EPCSFL6U  EPCSFL4U  CA715/10  CA726/10 
CA723/10  MT6/V-COM  MT6/V-GRND  MT2/V-110  EPS  CA721/10  CA713/10  CA802  CSP1  MT10  CA722/10 
CA402  EPCDTTU  EPCDL4U  CA747/2  CA701-15/S-2M  MT6/H-1-10  MT6/H-11-20  MT6/H-31-40  MT6/H-41-50 
MT6/H-51-60  MT6/H-61-70  MT6/H-71-80  MT6/H-81-90  MT6/H-N  CA721/2  CA721/4  CA721/3  CA729/3  CA729/4 
CA725/4  CA725/2  CA725/3  PPCMT4  EPODL4U  CA723/4  CA723/2  CA723/3  CA727/3  CA727/2  CA727/4 
MT2/H-1-10  MT5/H-1-10  MT8/H-1-10  EPCKT4U  MT2/H-11-20  2511110/1M  CA726/4  CA726/2  CA726/3  MT6/V--
  CA727/10  PPCSC4T  EPCAFL4U  PPCSC6T  MT9/H-L1  GMH6  GMH7  CA710/10