1:2 Single-Ended, Low Cost Active RF Splitter ADA4303-2 FUNCTIONAL BLOCK DIAGRAM FEATURES 5V Ideal for CATV applications Excellent frequency response 1.7 GHz, -3 dB bandwidth 1 dB flatness to 1.2 GHz Low noise figure: 4.4 dB Low distortion Composite second order (CSO): -62 dBc Composite triple beat (CTB): -72 dBc 1 dB compression point of 8.5 dBm 3 dB of gain per output channel 24 dB isolation between output channels 75 input and outputs Small package size 12-lead, 3 mm x 3 mm lead frame chip scale package 5V 0.1F 0.1F 1H VCC IL VO1 VIN 0.01F ADA4303-2 0.01F VO2 0.01F 249 249 06364-001 GND APPLICATIONS Figure 1. Set-top boxes Home gateways CATV distribution systems Splitter modules Digital cable ready (DCR) TVs GENERAL DESCRIPTION TA = -40C 3 2 TA = +25C 1 0 TA = +85C -1 -2 -3 -4 -5 -6 -7 -8 50 100 1000 FREQUENCY (MHz) 4000 06364-010 The ADA4303-2 is a low cost alternative that simplifies designs and improves system performance by integrating a signal splitter element and a gain block into a single IC. The ADA4303-2 is available in a 12-lead chip scale package (LFCSP_VQ) and operates in the extended industrial temperature range of -40C to +85C. 4 GAIN (dB) The ADA4303-2 is a 75 , two-output active splitter for use in applications where a lossless signal split is required. Typical applications include multituner digital set-top boxes, cable splitter modules, multituner/digital cable ready (DCR) televisions, and home gateways where traditional solutions require discrete passive splitter modules with separate fixed gain amplifiers. Figure 2. Gain (S21) vs. Frequency Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2006 Analog Devices, Inc. All rights reserved. ADA4303-2 TABLE OF CONTENTS Features .............................................................................................. 1 Pin Configuration and Function Descriptions..............................5 Applications....................................................................................... 1 Typical Performance Characteristics ..............................................6 Functional Block Diagram .............................................................. 1 Applications........................................................................................8 General Description ......................................................................... 1 Circuit Description .......................................................................8 Revision History ............................................................................... 2 Evaluation Board ...........................................................................8 Specifications..................................................................................... 3 RF Layout Considerations............................................................8 Absolute Maximum Ratings............................................................ 4 Power Supply..................................................................................8 Thermal Resistance ...................................................................... 4 Outline Dimensions ..........................................................................9 ESD Caution.................................................................................. 4 Ordering Guide .............................................................................9 REVISION HISTORY 10/06--Revision 0: Initial Version Rev. 0 | Page 2 of 12 ADA4303-2 SPECIFICATIONS VCC = 5 V, RIN = RL = 75 , TA = 25C, unless otherwise noted. Table 1. Parameter DYNAMIC PERFORMANCE Bandwidth (-3 dB) Specified Frequency Range Gain (S21) 1 dB Gain Flatness NOISE/DISTORTION PERFORMANCE Noise Figure Output IP3 Output IP2 Composite Triple Beat (CTB) Composite Second-Order (CSO) Cross Modulation (CXM) INPUT CHARACTERISTICS Input Return Loss (S11) Output-to-Input Isolation (S12) OUTPUT CHARACTERISTICS Output Return Loss (S22) Output-to-Output Isolation 1 dB Compression POWER SUPPLY Nominal Supply Voltage Quiescent Supply Current Conditions Min f = 100 MHz 54 2.0 Typ Max Unit 865 4.0 MHz MHz dB MHz 1700 @ 54 MHz @ 550 MHz @ 865 MHz f1 = 97.25 MHz, f2 = 103.25 MHz f1 = 97.25 MHz, f2 = 103.25 MHz 135 Channels, 15 dBmV/Channel, f = 865 MHz 135 Channels, 15 dBmV/Channel, f = 865 MHz 135 Channels, 15 dBmV/Channel, 100% modulation @ 15.75 kHz, f = 865 MHz Referenced to 75 @ 54 MHz @ 550 MHz @ 865 MHz Any output, 54 MHz to 865 MHz @ 54 MHz @ 550 MHz @ 865 MHz Referenced to 75 @ 54 MHz @ 550 MHz @ 865 MHz Between any two outputs, 54 MHz to 865 MHz @ 54 MHz @ 550 MHz @ 865 MHz Output referred, f = 100 MHz 4.0 4.3 4.4 26.5 44.0 -72 -62 -68 4.3 4.9 5.1 -66 -60 -65 dB dB dB dBm dBm dBc dBc dBc -15.0 -19.5 -12.0 -11.5 -14.0 -7.5 dB dB dB -31.8 -32.0 -32.5 -29.0 -29.5 -30.0 dB dB dB -31.2 -19.4 -15.5 -23.0 -14.0 -11.0 dB dB dB -24.6 -24.0 -24.5 8.5 4.5 Rev. 0 | Page 3 of 12 3.0 1200 5.0 78 dB dB dB dBm 5.5 90 V mA ADA4303-2 ABSOLUTE MAXIMUM RATINGS Rating 5.5 V See Figure 3 -65C to +125C -40C to +85C 300C 150C Stresses above those listed under Absolute Maximum Rating may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. THERMAL RESISTANCE JA is specified for the worst-case conditions; that is, JA is specified for a device (including exposed pad) soldered to the circuit board. Table 3. Thermal Resistance Package Type 12-Lead LFCSP_VQ (exposed pad) JA 99.2 Unit C/W Maximum Power Dissipation The maximum safe power dissipation in the ADA4303-2 package is limited by the associated rise in junction temperature (TJ) on the die. At approximately 150C, which is the glass transition temperature, the plastic changes its properties. Even temporarily exceeding this temperature limit can change the stresses that the package exerts on the die, permanently shifting the parametric performance of the ADA4303-2. Exceeding a junction temperature of 150C for an extended period can result in changes in the silicon devices, potentially causing failure. The power dissipated in the package (PD) is the sum of the quiescent power dissipation and the power dissipated in the package due to the load drive. The quiescent power is the voltage between the supply pins (VS) times the quiescent current (IS). The power dissipated due to the load drive depends upon the particular application. The power due to load drive is calculated by multiplying the load current by the associated voltage drop across the device. RMS voltages and currents must be used in these calculations. Airflow increases heat dissipation, effectively reducing JA. In addition, more metal directly in contact with the package leads/exposed pad from metal traces, through-holes, ground, and power planes reduces the JA. Figure 3 shows the maximum safe power dissipation in the package vs. the ambient temperature for the 12-lead LFCSP_VQ (99.2C/W) on a JEDEC standard 4-layer board. 2.5 2.0 1.5 1.0 0.5 0 -60 -40 -20 0 20 40 60 AMBIENT TEMPERATURE (C) 80 100 120 06364-016 Parameter Supply Voltage Power Dissipation Storage Temperature Range Operating Temperature Range Lead Temperature (Soldering, 10 sec) Junction Temperature MAXIMUM POWER DISSIPATION (W) Table 2. Figure 3. Maximum Power Dissipation vs. Temperature for a 4-Layer Board ESD CAUTION Rev. 0 | Page 4 of 12 ADA4303-2 11 IL PIN 1 INDICATOR 9 VO1 7 GND NC 6 8 VO2 TOP VIEW GND 4 ADA4303-2 GND 3 GND 5 VIN 2 NC = NO CONNECT Figure 4. Pin Configuration Table 4. Pin Function Descriptions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Mnemonic VCC VIN GND GND GND NC GND VO2 VO1 NC IL VCC Description Supply Pin Input Ground Ground Ground No Connection Ground Output 2 Output 1 No Connection Bias Pin Supply Pin Rev. 0 | Page 5 of 12 06364-002 VCC 1 10 NC 12 VCC PIN CONFIGURATION AND FUNCTION DESCRIPTIONS ADA4303-2 TYPICAL PERFORMANCE CHARACTERISTICS -50 10 -53 -56 8 TA = +85C NOISE FIGURE (dB) CSO (dBc) -59 -62 TA = +25C -65 TA = -40C -68 -71 6 TA = +85C 4 TA = +25C -74 TA = -40C 2 100 1000 FREQUENCY (MHz) 0 50 06364-004 -80 50 100 1000 FREQUENCY (MHz) Figure 5. Composite Second-Order (CSO) vs. Frequency 06364-007 -77 Figure 8. Noise Figure vs. Frequency -60 60 -63 55 -66 CTB (dBc) OUTPUT IP2 (dBm) 50 -69 TA = +85C -72 -75 -78 TA = +25C -81 TA = -40C 45 40 35 30 -84 100 1000 FREQUENCY (MHz) 20 50 06364-005 -90 50 100 1000 FREQUENCY (MHz) Figure 6. Composite Triple Beat (CTB) vs. Frequency 06364-008 25 -87 Figure 9. Output IP2 vs. Frequency -60 40 -63 35 -66 30 OUTPUT IP3 (dBm) TA = +85C -72 -75 -78 -81 TA = +25C TA = -40C 25 20 15 10 -84 -90 50 100 1000 FREQUENCY (MHz) Figure 7. Cross Modulation (CXM) vs. Frequency 0 50 100 1000 FREQUENCY (MHz) Figure 10. Output IP3 vs. Frequency Rev. 0 | Page 6 of 12 06364-009 5 -87 06364-006 CXM (dBc) -69 ADA4303-2 4 2 -5 0 INPUT RETURN LOSS (dB) TA = +25C 1 GAIN (dB) 0 TA = -40C 3 TA = +85C -1 -2 -3 -4 -5 -6 -10 -15 -20 -25 100 1000 4000 FREQUENCY (MHz) -30 50 06364-010 -8 50 Figure 14. Input Return Loss (S11) vs. Frequency -30 0 -31 -5 OUTPUT RETURN LOSS (dB) -32 -33 -34 -35 -36 -37 -38 -10 -15 -20 -25 -30 100 1000 4000 FREQUENCY (MHz) -40 50 06364-011 -40 50 100 1000 FREQUENCY (MHz) Figure 12. Output-to-Input Isolation (S12) vs. Frequency 06364-014 -35 -39 Figure 15. Output Return Loss (S22) vs. Frequency 0 90 QUIESCENT SUPPLY CURRENT (mA) -5 -10 -15 -20 -25 -30 -35 -45 50 100 1000 FREQUENCY (MHz) 4000 06364-012 -40 Figure 13. Output-to-Output Isolation vs. Frequency 85 80 75 70 65 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 TEMPERATURE (C) Figure 16. Quiescent Supply Current vs. Temperature Rev. 0 | Page 7 of 12 06364-015 ISOLATION (dB) 1000 FREQUENCY (MHz) Figure 11. Gain (S21) vs. Frequency ISOLATION (dB) 100 06364-013 -7 ADA4303-2 APPLICATIONS The ADA4303-2 active splitter is primarily intended for use in the downstream path of television set-top boxes (STBs) that contain multiple tuners. It is typically located directly after the diplexer in a CATV customer premise unit. The ADA4303-2 provides a single-ended input and two single-ended outputs that allow the delivery of the RF signal to two different signal paths. These paths can include, but are not limited to, a main picture tuner, a picture-in-picture (PIP) tuner, an out-of-band (OOB) tuner, a digital video recorder (DVR), and a cable modem (CM). EVALUATION BOARD The ADA4303-2 evaluation board allows designers to assess the performance of the part in their particular applications. The board includes 75 coaxial connectors and 75 controlled-impedance signal traces that carry the input and output signals. Power (5 V) is applied to the red VCC loop connector, and ground is connected to the black GND loop connector. The board has two 249 resistors between each output and ground that set the gain of the overall circuit to 3 dB and improve output-to-output isolation. A schematic of the ADA4303-2 evaluation board is shown in Figure 17. The ADA4303-2 exhibits composite second-order (CSO) and composite triple beat (CTB) products that are -62 dBc and -72 dBc, respectively. The use of the SiGe process also allows the ADA4303-2 to achieve a noise figure (NF) of less than 4.5 dB. RF LAYOUT CONSIDERATIONS Appropriate impedance matching techniques are mandatory when designing a circuit board for the ADA4303-2. Improper characteristic impedances on traces can cause reflections that can lead to poor linearity. The characteristic impedance of the signal trace from each output should be 75 . CIRCUIT DESCRIPTION The ADA4303-2 consists of a low noise buffer amplifier followed by a resistive power divider. This arrangement provides 3 dB of gain relative to the RF signal present at the input of the device. The input and each output must be properly matched to a 75 environment for distortion and noise performance to match the data sheet specifications. In addition, to achieve the specified gain, a 1% 249 resistor should be installed to ground on each output. AC coupling capacitors of 0.01 F are recommended for the input and outputs. POWER SUPPLY The 5 V supply should be applied to each of the VCC pins and RF choke via a low impedance power bus. The power bus should be decoupled to ground using a 10 F tantalum capacitor and a 0.1 F ceramic chip capacitor located close to the ADA4303-2. In addition, the VCC pins should be decoupled to ground with a 0.1 F ceramic chip capacitor located as close to each of the pins as possible. A 1 H RF choke (Coilcraft chip inductor 0805LS-102X) is required to correctly bias internal nodes of the ADA4303-2. It should be connected between the 5 V supply and IL (Pin 11). VCC C1 0.1F C2 0.01F 1 2 VCC VIN IL C3 0.01F 10 ADA4303-2 GND VO1 VO2 GND GND 3 11 5 249 9 8 7 C4 0.01F 249 J3 6 06364-003 4 J2 NC J1 12 GND C6 0.1F L1 1.0H NC + VCC C5 10F GND NC = NO CONNECT Figure 17. ADA4303-2 Evaluation Board Schematic Rev. 0 | Page 8 of 12 ADA4303-2 OUTLINE DIMENSIONS 3.00 BSC SQ 0.60 MAX 0.45 PIN 1 INDICATOR 0.75 0.55 0.35 9 2.75 BSC SQ TOP VIEW 10 11 12 8 6 12 MAX SEATING PLANE 5 4 3 0.25 MIN 0.50 BSC 0.80 MAX 0.65 TYP 1.00 0.85 0.80 *1.45 1.30 SQ 1.15 2 7 EXPOSED PAD (BOTTOM VIEW) 1 PIN 1 INDICATOR 0.05 MAX 0.02 NOM 0.30 0.23 0.18 0.20 REF COPLANARITY 0.08 *COMPLIANT TO JEDEC STANDARDS MO-220-VEED-1 EXCEPT FOR EXPOSED PAD DIMENSION. Figure 18. 12-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 3 mm x 3 mm Body, Very Thin Quad (CP-12-1) Dimensions shown in millimeters ORDERING GUIDE Model ADA4303-2ACPZ-RL 1 ADA4303-2ACPZ-R71 ADA4303-2ACPZ-R21 ADA4303-2ACPZ-EB1 1 Temperature Range -40C to +85C -40C to +85C -40C to +85C Package Description 12-Lead LFCSP_VQ 12-Lead LFCSP_VQ 12-Lead LFCSP_VQ Evaluation Board Z = Pb-free part. Rev. 0 | Page 9 of 12 Package Option CP-12-1 CP-12-1 CP-12-1 Ordering Quantity 5000 1500 250 Branding H0V H0V H0V ADA4303-2 NOTES Rev. 0 | Page 10 of 12 ADA4303-2 NOTES Rev. 0 | Page 11 of 12 ADA4303-2 NOTES (c)2006 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D06364-0-10/06(0) Rev. 0 | Page 12 of 12