CLD-DS97 Rev 5 Product family data sheet Cree(R) XLamp(R) XP-L LEDs XP-L High Density LED XP-L High Intensity LED Product Description FEATURES Table of Contents XLamp(R) XP-L LEDs are available in two * Available in white, 70-CRI white, 80CRI Characteristics.............................................2 white, 85 CRI white and 90CRI white Flux Characteristics - XP-L High Density....3 * ANSIcompatible chromaticity bins Flux Characteristics - XP-L High Intensity..8 The XLamp XP-L High Density (HD) LED * Binned at 85 C Relative Spectral Power Distribution....... 12 is the highest performing discrete in * Maximum drive current: 3000 mA Relative Flux vs. Junction Temperature... 12 Cree's High Density (HD) class of LEDs, * Low thermal resistance: 2.2 C/W Electrical Characteristics.......................... 13 delivering the next generation of lumen * Wide viewing angle: 125 (XP-L High Relative Flux vs. Current........................... 13 versions: High Density and High Intensity. output and efficacy in the compact 3.45 mm x 3.45 mm XP footprint. * Cree's HD LEDs, optimized to deliver Density), 115 (XP-L High Intensity) Relative Chromaticity vs. Current............. 14 Unlimited floor life at Relative Chromaticity vs. Temperature.... 15 30 C/85% RH Typical Spatial Distribution....................... 16 maximum lumen output in a small form * Reflow solderable - JEDEC JSTD020C Thermal Design......................................... 16 factor, enable lighting manufacturers * Electrically neutral thermal path Performance Groups - Luminous Flux... 17 to improve the performance of any * RoHS and REACh compliant Performance Groups - Chromaticity....... 18 lighting design, create smaller and less * UL recognized component (E349212) Cree's Standard Chromaticity Regions (R) expensive systems, and develop new Plotted on the 1931 CIE Curve................. 21 lighting solutions that were previously Cree's Standard Cool White Kits Plotted not possible. on ANSI Standard Chromaticity www.cree.com/Xlamp Regions...................................................... 23 The XLamp XP-L High Intensity (HI) LED Cree's Standard Warm and Neutral is the first of Cree's new class of High White Kits Plotted on ANSI Standard Intensity (HI) LEDs optimized to deliver Chromaticity Regions............................... 24 maximum candela through secondary Cree's Standard Chromaticity Kits........... 26 optics. Built on Cree's breakthrough SC5 Bin and Order Code Formats.................... 27 TechnologyTM Platform, the XP-L HI LED Reflow Soldering Characteristics............. 28 delivers 120 percent more candela than Notes......................................................... 29 the XP-L HD LED through the same optic. Mechanical Dimensions........................... 31 The XP-L HI LED leverages the industry's Tape and Reel............................................ 34 highest single-die performance and a Packaging.................................................. 36 new innovative primary optic design that radically reduces the optical source size to deliver both lumens and intensity. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) XP-L LED Characteristics Characteristics Unit Thermal resistance, junction to solder point C/W 2.2 Viewing angle (FWHM) - XP-L High Density degrees 125 Viewing angle (FWHM) - XP-L High Intensity degrees 115 mV/C -2 Temperature coefficient of voltage ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 mA 3000 Reverse voltage V -5 Forward voltage (@ 1050 mA, 85 C) V LED junction temperature C DC forward current 2.95 3.25 150 Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 2 XLamp (R) XP-L LED Flux Characteristics - XP-L High Density (TJ = 85 C) The following table provides order codes for XLamp XP-L High Density LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree's Standard Chromaticity Kits section (page 26). Chromaticity Kit 51 53 50 E1 E2 CCT 6200 K 6000 K 6200 K 6500 K 5700 K Minimum Luminous Flux (lm) @ 1050 mA Code Flux (lm) @ 85 C Flux (lm) @ 25 C* Order Codes 65 CRI Typical 70 CRI Minimum V6 480 535 XPLAWT-00-0000-0000V6051 XPLAWT-00-0000-000BV6051 V5 460 513 XPLAWT-00-0000-0000V5051 XPLAWT-00-0000-000BV5051 V4 440 491 XPLAWT-00-0000-0000V4051 XPLAWT-00-0000-000BV4051 V3 420 468 XPLAWT-00-0000-0000V3051 XPLAWT-00-0000-000BV3051 V2 400 446 V6 480 535 XPLAWT-00-0000-0000V6053 XPLAWT-00-0000-000BV6053 XPLAWT-00-0000-000BV2051 V5 460 513 XPLAWT-00-0000-0000V5053 XPLAWT-00-0000-000BV5053 V4 440 491 XPLAWT-00-0000-0000V4053 XPLAWT-00-0000-000BV4053 V3 420 468 XPLAWT-00-0000-0000V3053 XPLAWT-00-0000-000BV3053 V2 400 446 XPLAWT-00-0000-000BV2053 V6 480 535 XPLAWT-00-0000-0000V6050 XPLAWT-00-0000-000BV6050 V5 460 513 XPLAWT-00-0000-0000V5050 XPLAWT-00-0000-000BV5050 V4 440 491 XPLAWT-00-0000-0000V4050 XPLAWT-00-0000-000BV4050 XPLAWT-00-0000-0000V3050 V3 420 468 V2 400 446 XPLAWT-00-0000-000BV3050 V6 480 535 XPLAWT-00-0000-0000V60E1 XPLAWT-00-0000-000BV60E1 V5 460 513 XPLAWT-00-0000-0000V50E1 XPLAWT-00-0000-000BV50E1 V4 440 491 XPLAWT-00-0000-0000V40E1 XPLAWT-00-0000-000BV40E1 V3 420 468 XPLAWT-00-0000-0000V30E1 XPLAWT-00-0000-000BV30E1 V2 400 446 XPLAWT-00-0000-000BV2050 XPLAWT-00-0000-000BV20E1 V6 480 535 XPLAWT-00-0000-0000V60E2 XPLAWT-00-0000-000BV60E2 V5 460 513 XPLAWT-00-0000-0000V50E2 XPLAWT-00-0000-000BV50E2 V4 440 491 XPLAWT-00-0000-0000V40E2 XPLAWT-00-0000-000BV40E2 V3 420 468 XPLAWT-00-0000-000BV30E2 V2 400 446 XPLAWT-00-0000-000BV20E2 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 3 XLamp (R) XP-L LED Flux Characteristics - XP-L High Density (TJ = 85 C) - Continued Chromaticity Kit E3 F4 E4 F5 E5 Z5 CCT 5000 K 4750 K 4500 K 4250 K 4000 K 4000 K Minimum Luminous Flux (lm) @ 1050 mA Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 70 CRI Minimum V6 480 535 XPLAWT-00-0000-000BV60E3 75 CRI Typical V5 460 513 XPLAWT-00-0000-000BV50E3 XPLAWT-00-0000-000LV50E3 V4 440 491 XPLAWT-00-0000-000BV40E3 XPLAWT-00-0000-000LV40E3 V3 420 468 XPLAWT-00-0000-000BV30E3 XPLAWT-00-0000-000LV30E3 XPLAWT-00-0000-000LV20E3 V2 400 446 XPLAWT-00-0000-000BV20E3 V6 480 535 XPLAWT-00-0000-000BV60F4 V5 460 513 XPLAWT-00-0000-000BV50F4 XPLAWT-00-0000-000LV50F4 V4 440 491 XPLAWT-00-0000-000BV40F4 XPLAWT-00-0000-000LV40F4 V3 420 468 XPLAWT-00-0000-000BV30F4 XPLAWT-00-0000-000LV30F4 XPLAWT-00-0000-000LV20F4 V2 400 446 XPLAWT-00-0000-000BV20F4 V6 480 535 XPLAWT-00-0000-000BV60E4 V5 460 513 XPLAWT-00-0000-000BV50E4 XPLAWT-00-0000-000LV50E4 V4 440 491 XPLAWT-00-0000-000BV40E4 XPLAWT-00-0000-000LV40E4 V3 420 468 XPLAWT-00-0000-000BV30E4 XPLAWT-00-0000-000LV30E4 XPLAWT-00-0000-000LV20E4 V2 400 446 XPLAWT-00-0000-000BV20E4 V6 480 535 XPLAWT-00-0000-000BV60F5 V5 460 513 XPLAWT-00-0000-000BV50F5 XPLAWT-00-0000-000LV50F5 V4 440 491 XPLAWT-00-0000-000BV40F5 XPLAWT-00-0000-000LV40F5 V3 420 468 XPLAWT-00-0000-000BV30F5 XPLAWT-00-0000-000LV30F5 V2 400 446 XPLAWT-00-0000-000BV20F5 XPLAWT-00-0000-000LV20F5 V6 480 535 XPLAWT-00-0000-000BV60E5 V5 460 513 XPLAWT-00-0000-000BV50E5 V4 440 491 XPLAWT-00-0000-000BV40E5 80 CRI Minimum XPLAWT-00-0000-000LV40E5 XPLAWT-00-0000-000HV40E5 V3 420 468 XPLAWT-00-0000-000BV30E5 XPLAWT-00-0000-000LV30E5 XPLAWT-00-0000-000HV30E5 V2 400 446 XPLAWT-00-0000-000BV20E5 XPLAWT-00-0000-000LV20E5 XPLAWT-00-0000-000HV20E5 XPLAWT-00-0000-000BU60E5 XPLAWT-00-0000-000LU60E5 U6 380 424 U5 360 401 XPLAWT-00-0000-000HU60E5 XPLAWT-00-0000-000HU50E5 V4 440 491 XPLAWT-00-0000-000BV40Z5 XPLAWT-00-0000-000LV40Z5 XPLAWT-00-0000-000HV40Z5 V3 420 468 XPLAWT-00-0000-000BV30Z5 XPLAWT-00-0000-000LV30Z5 XPLAWT-00-0000-000HV30Z5 V2 400 446 XPLAWT-00-0000-000BV20Z5 XPLAWT-00-0000-000LV20Z5 XPLAWT-00-0000-000HV20Z5 XPLAWT-00-0000-000BU60Z5 XPLAWT-00-0000-000LU60Z5 U6 380 424 U5 360 401 XPLAWT-00-0000-000HU60Z5 XPLAWT-00-0000-000HU50Z5 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 4 XLamp (R) XP-L LED Flux Characteristics - XP-L High Density (TJ = 85 C) - Continued Chromaticity Kit F6 Chromaticity Kit E6 Z6 F7 CCT CCT 3700 K Minimum Luminous Flux (lm) @ 1050 mA Code Flux (lm) @ 85 C Flux (lm) @ 25 C* V4 440 491 V3 420 468 XPLAWT-00-0000-000LV30F6 V2 400 446 XPLAWT-00-0000-000LV20F6 XPLAWT-00-0000-000HV20F6 U6 380 424 XPLAWT-00-0000-000LU60F6 XPLAWT-00-0000-000HU60F6 U5 360 401 XPLAWT-00-0000-000LU50F6 XPLAWT-00-0000-000HU50F6 70 CRI Minimum 75 CRI Typical XPLAWT-00-0000-000HV30F6 Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 80 CRI Typical 80 CRI Minimum V3 420 468 XPLAWT-00-0000000LV30E6 XPLAWT-00-0000000HV30E6 V2 400 446 XPLAWT-00-0000000LV20E6 XPLAWT-00-0000000HV20E6 U6 380 424 XPLAWT-00-0000000LU60E6 XPLAWT-00-0000000HU60E6 U5 360 401 XPLAWT-00-0000000LU50E6 XPLAWT-00-0000000HU50E6 V2 400 446 XPLAWT-00-0000000LV20Z6 XPLAWT-00-0000000HV20Z6 U6 380 424 XPLAWT-00-0000000LU60Z6 XPLAWT-00-0000000HU60Z6 U5 360 401 XPLAWT-00-0000000LU50Z6 XPLAWT-00-0000000HU50Z6 V2 400 446 XPLAWT-00-0000000LV20F7 XPLAWT-00-0000000HV20F7 U6 380 424 XPLAWT-00-0000000LU60F7 XPLAWT-00-0000000HU60F7 U5 360 401 XPLAWT-00-0000000LU50F7 XPLAWT-00-0000000HU50F7 U4 340 379 XPLAWT-00-0000000LU40F7 XPLAWT-00-0000000HU40F7 3250 K 80 CRI Minimum XPLAWT-00-0000-000HV40F6 Minimum Luminous Flux (lm) @ 1050 mA 3500 K 3500 K Order Codes 85 CRI Minimum 90 CRI Minimum Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 5 XLamp (R) XP-L LED Flux Characteristics - XP-L High Density (TJ = 85 C) - Continued Chromaticity Kit E7 Z7 F8 CCT 3000 K Minimum Luminous Flux (lm) @ 1050 mA Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 80 CRI Typical 80 CRI Minimum V2 400 446 XPLAWT-00-0000000LV20E7 XPLAWT-00-0000000HV20E7 U6 380 424 XPLAWT-00-0000000LU60E7 XPLAWT-00-0000000HU60E7 U5 360 401 XPLAWT-00-0000000LU50E7 XPLAWT-00-0000000HU50E7 U4 340 379 XPLAWT-00-0000000LU40E7 XPLAWT-00-0000000HU40E7 U3 320 U2 85 CRI Minimum 90 CRI Minimum 357 XPLAWT-00-0000000PU30E7 XPLAWT-00-0000000UU30E7 300 334 XPLAWT-00-0000000PU20E7 XPLAWT-00-0000000UU20E7 T6 280 312 XPLAWT-00-0000000PT60E7 XPLAWT-00-0000000UT60E7 U6 380 424 XPLAWT-00-0000000LU60Z7 XPLAWT-00-0000000HU60Z7 U5 360 401 XPLAWT-00-0000000LU50Z7 XPLAWT-00-0000000HU50Z7 U4 340 379 XPLAWT-00-0000000LU40Z7 XPLAWT-00-0000000HU40Z7 U3 320 357 XPLAWT-00-0000000PU30Z7 XPLAWT-00-0000000UU30Z7 U2 300 334 XPLAWT-00-0000000PU20Z7 XPLAWT-00-0000000UU20Z7 T6 280 312 XPLAWT-00-0000000PT60Z7 XPLAWT-00-0000000UT60Z7 V2 400 446 XPLAWT-00-0000000LV20F8 U6 380 424 XPLAWT-00-0000000LU60F8 XPLAWT-00-0000000HU60F8 U5 360 401 XPLAWT-00-0000000LU50F8 XPLAWT-00-0000000HU50F8 U4 340 379 XPLAWT-00-0000000LU40F8 XPLAWT-00-0000000HU40F8 U3 320 357 XPLAWT-00-0000000PU30F8 XPLAWT-00-0000000UU30F8 U2 300 334 XPLAWT-00-0000000PU20F8 XPLAWT-00-0000000UU20F8 T6 280 312 XPLAWT-00-0000000PT60F8 XPLAWT-00-0000000UT60F8 T5 260 290 XPLAWT-00-0000000PT50F8 XPLAWT-00-0000000UT50F8 3000 K 2850 K Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 6 XLamp (R) XP-L LED Flux Characteristics - XP-L High Density (TJ = 85 C) - Continued Chromaticity Kit E8 Z8 CCT Minimum Luminous Flux (lm) @ 1050 mA Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 80 CRI Typical V2 400 446 XPLAWT-00-0000000LV20E8 U6 380 424 XPLAWT-00-0000000LU60E8 XPLAWT-00-0000000HU60E8 U5 360 401 XPLAWT-00-0000000LU50E8 XPLAWT-00-0000000HU50E8 U4 340 379 XPLAWT-00-0000000LU40E8 XPLAWT-00-0000000HU40E8 U3 320 U2 85 CRI Minimum 90 CRI Minimum 357 XPLAWT-00-0000000PU30E8 XPLAWT-00-0000000UU30E8 300 334 XPLAWT-00-0000000PU20E8 XPLAWT-00-0000000UU20E8 T6 280 312 XPLAWT-00-0000000PT60E8 XPLAWT-00-0000000UT60E8 T5 260 290 XPLAWT-00-0000000PT50E8 XPLAWT-00-0000000UT50E8 U6 380 424 XPLAWT-00-0000000LU60Z8 U5 360 401 XPLAWT-00-0000000LU50Z8 XPLAWT-00-0000000HU50Z8 U4 340 379 XPLAWT-00-0000000LU40Z8 XPLAWT-00-0000000HU40Z8 U3 320 357 U2 300 334 XPLAWT-00-0000000PU20Z8 XPLAWT-00-0000000UU20Z8 T6 280 312 XPLAWT-00-0000000PT60Z8 XPLAWT-00-0000000UT60Z8 T5 260 290 XPLAWT-00-0000000PT50Z8 XPLAWT-00-0000000UT50Z8 2700 K 2700 K Order Codes 80 CRI Minimum Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 7 XLamp (R) XP-L LED Flux Characteristics - XP-L High Intensity (TJ = 85 C) The following table provides order codes for XLamp XP-L High Intensity LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree's Standard Chromaticity Kits section (page 26). Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Order Codes Kit CCT Code Flux (lm) @ 85 C Flux (lm) @ 25 C* V2 400 446 XPLAWT-H0-0000-0000V2051 XPLAWT-H0-0000-000BV2051 51 6200 K U6 380 424 XPLAWT-H0-0000-0000U6051 XPLAWT-H0-0000-000BU6051 53 50 E1 E2 6000 K 6200 K 6500 K 5700 K 65 CRI Typical 70 CRI Minimum U5 360 401 XPLAWT-H0-0000-0000U5051 XPLAWT-H0-0000-000BU5051 V2 400 446 XPLAWT-H0-0000-0000V2053 XPLAWT-H0-0000-000BV2053 U6 380 424 XPLAWT-H0-0000-0000U6053 XPLAWT-H0-0000-000BU6053 U5 360 401 XPLAWT-H0-0000-0000U5053 XPLAWT-H0-0000-000BU5053 V2 400 446 XPLAWT-H0-0000-0000V2050 XPLAWT-H0-0000-000BV2050 U6 380 424 XPLAWT-H0-0000-0000U6050 XPLAWT-H0-0000-000BU6050 U5 360 401 XPLAWT-H0-0000-0000U5050 XPLAWT-H0-0000-000BU5050 V2 400 446 XPLAWT-H0-0000-0000V20E1 XPLAWT-H0-0000-000BV20E1 U6 380 424 XPLAWT-H0-0000-0000U60E1 XPLAWT-H0-0000-000BU60E1 U5 360 401 XPLAWT-H0-0000-0000U50E1 XPLAWT-H0-0000-000BU50E1 V2 400 446 XPLAWT-H0-0000-0000V20E2 XPLAWT-H0-0000-000BV20E2 U6 380 424 XPLAWT-H0-0000-0000U60E2 XPLAWT-H0-0000-000BU60E2 U5 360 401 XPLAWT-H0-0000-0000U50E2 XPLAWT-H0-0000-000BU50E2 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 8 XLamp (R) XP-L LED Flux Characteristics - XP-L High Intensity (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Kit Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 70 CRI Minimum 75 CRI Typical V2 400 446 XPLAWT-H0-0000-000BV20E3 XPLAWT-H0-0000-000LV20E3 E3 F4 E4 F5 E5 F6 CCT 5000 K 4750 K 4500 K 4250 K 4000 K 3700 K Order Codes U6 380 424 XPLAWT-H0-0000-000BU60E3 XPLAWT-H0-0000-000LU60E3 U5 360 401 XPLAWT-H0-0000-000BU50E3 XPLAWT-H0-0000-000LU50E3 V2 400 446 XPLAWT-H0-0000-000BV20F4 XPLAWT-H0-0000-000LV20F4 U6 380 424 XPLAWT-H0-0000-000BU60F4 XPLAWT-H0-0000-000LU60F4 U5 360 401 XPLAWT-H0-0000-000BU50F4 XPLAWT-H0-0000-000LU50F4 V2 400 446 XPLAWT-H0-0000-000BV20E4 XPLAWT-H0-0000-000LV20E4 U6 380 424 XPLAWT-H0-0000-000BU60E4 XPLAWT-H0-0000-000LU60E4 U5 360 401 XPLAWT-H0-0000-000BU50E4 XPLAWT-H0-0000-000LU50E4 V2 400 446 XPLAWT-H0-0000-000BV20F5 XPLAWT-H0-0000-000LV20F5 U6 380 424 XPLAWT-H0-0000-000BU60F5 XPLAWT-H0-0000-000LU60F5 U5 360 401 XPLAWT-H0-0000-000BU50F5 XPLAWT-H0-0000-000LU50F5 V2 400 446 XPLAWT-H0-0000-000BV20E5 XPLAWT-H0-0000-000LV20E5 U6 380 424 XPLAWT-H0-0000-000BU60E5 XPLAWT-H0-0000-000LU60E5 80 CRI Minimum XPLAWT-H0-0000-000HU60E5 U5 360 401 XPLAWT-H0-0000-000BU50E5 XPLAWT-H0-0000-000LU50E5 XPLAWT-H0-0000-000HU50E5 U4 340 379 XPLAWT-H0-0000-000BU40E5 XPLAWT-H0-0000-000LU40E5 XPLAWT-H0-0000-000HU40E5 U5 360 401 XPLAWT-H0-0000-000LU50F6 XPLAWT-H0-0000-000HU50F6 U4 340 379 XPLAWT-H0-0000-000LU40F6 XPLAWT-H0-0000-000HU40F6 U3 320 357 XPLAWT-H0-0000-000LU30F6 XPLAWT-H0-0000-000HU30F6 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 9 XLamp (R) XP-L LED Flux Characteristics - XP-L High Intensity (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Kit Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 80 CRI Typical 80 CRI Minimum U5 360 401 XPLAWT-H0-0000000LU50E6 XPLAWT-H0-0000000HU50E6 U4 340 379 XPLAWT-H0-0000000LU40E6 XPLAWT-H0-0000000HU40E6 U3 320 357 XPLAWT-H0-0000000LU30E6 XPLAWT-H0-0000000HU30E6 U4 340 379 XPLAWT-H0-0000000LU40F7 XPLAWT-H0-0000000HU40F7 U3 320 357 XPLAWT-H0-0000000LU30F7 XPLAWT-H0-0000000HU30F7 U2 300 334 XPLAWT-H0-0000000LU20F7 XPLAWT-H0-0000000HU20F7 U4 340 379 XPLAWT-H0-0000000LU40E7 XPLAWT-H0-0000000HU40E7 U3 320 357 XPLAWT-H0-0000000LU30E7 XPLAWT-H0-0000000HU30E7 U2 300 334 XPLAWT-H0-0000000LU20E7 XPLAWT-H0-0000000HU20E7 T6 280 T5 E6 F7 E7 F8 CCT 3500 K 3250 K 85 CRI Minimum 90 CRI Minimum 312 XPLAWT-H0-0000000PT60E7 XPLAWT-H0-0000000UT60E7 260 290 XPLAWT-H0-0000000PT50E7 XPLAWT-H0-0000000UT50E7 T4 240 268 XPLAWT-H0-0000000PT40E7 XPLAWT-H0-0000000UT40E7 U4 340 379 XPLAWT-H0-0000000LU40F8 XPLAWT-H0-0000000HU40F8 U3 320 357 XPLAWT-H0-0000000LU30F8 XPLAWT-H0-0000000HU30F8 U2 300 334 XPLAWT-H0-0000000LU20F8 XPLAWT-H0-0000000HU20F8 T6 280 312 XPLAWT-H0-0000000PT60F8 T5 260 290 XPLAWT-H0-0000000PT50F8 XPLAWT-H0-0000000UT50F8 T4 240 268 XPLAWT-H0-0000000PT40F8 XPLAWT-H0-0000000UT40F8 T3 220 245 XPLAWT-H0-0000000PT30F8 3000 K 2850 K Order Codes Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 10 XLamp (R) XP-L LED Flux Characteristics - XP-L High Intensity (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Kit Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 80 CRI Typical U4 340 379 XPLAWT-H0-0000000LU40E8 U3 320 357 XPLAWT-H0-0000000LU30E8 XPLAWT-H0-0000000HU30E8 U2 300 334 XPLAWT-H0-0000000LU20E8 XPLAWT-H0-0000000HU20E8 T6 280 312 XPLAWT-H0-0000000PT60E8 T5 260 290 XPLAWT-H0-0000000PT50E8 XPLAWT-H0-0000000UT50E8 T4 240 268 XPLAWT-H0-0000000PT40E8 XPLAWT-H0-0000000UT40E8 T3 220 245 XPLAWT-H0-0000000PT30E8 E8 CCT 2700 K Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 29). * Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 11 XLamp (R) XP-L LED Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 60 5000 K - 8300 K CCT 3700 K - 5000 K CCT 2600 K - 3700 K CCT 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 1050 mA) 120 Relative Luminous Flux (%) 100 80 60 40 20 0 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 12 XLamp (R) XP-L LED Electrical Characteristics (Tj = 85C) Electrical Characteristics (TJ = 85 C) 3000 Forward Current (mA) 2500 2000 1500 1000 500 0 2.6 2.8 3.0 3.2 3.4 Forward Voltage (V) Relative Intensity vs. Current (Tj = 85C) Relative Flux vs. Current (TJ = 85 C) Relative Luminous Flux (%) 250 200 150 100 50 0 0 500 1000 1500 2000 2500 3000 Forward Current (mA) Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 13 XLamp (R) XP-L LED Relative Chromaticity Vs. Current, HD Relative Chromaticity vs. Current (Warm White) 0.020 0.016 XP-L High Density 0.012 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 500 1000 1500 2000 2500 3000 Current (mA) Relative Chromaticity Vs. Current, HI 0.020 0.016 XP-L High Intensity 0.012 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 500 1000 1500 2000 2500 3000 Current (mA) Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 14 XLamp (R) XP-L LED Relative Chromaticity Vs. Temperature, HD Relative Chromaticity vs. Temperature (Warm White) 0.020 0.016 XP-L High Density 0.012 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 Relative Chromaticity Vs. Temperature, HI 25 50 75 100 125 150 Tsp (C) 0.020 0.016 XP-L High Intensity 0.012 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 25 50 75 100 125 150 Tsp (C) Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 15 XLamp (R) XP-L LED Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 XP-L High Density XP-L High Intensity 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle () Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end Thermal Design product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life Cool White and optical characteristics. 3500 Maximum Current (mA) 3000 2500 2000 1500 Rj-a = 4C/W 1000 Rj-a = 7C/W Rj-a = 10C/W 500 Rj-a = 15C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 16 XLamp (R) XP-L LED Performance Groups - Luminous Flux XLamp XP-L LEDs are tested for luminous flux and placed into one of the following luminousflux groups: Group Code Minimum Luminous Flux (lm) @ 1050 mA Maximum Luminous Flux (lm) @ 1050 mA T3 220 240 T4 240 260 T5 260 280 T6 280 300 U2 300 320 U3 320 340 U4 340 360 U5 360 380 U6 380 400 V2 400 420 V3 420 440 V4 440 460 V5 460 480 V6 480 500 W2 500 520 W3 520 540 Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 17 XLamp (R) XP-L LED Performance Groups - Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 Region x y 0.2920 0.3060 x y 0.2984 0.3133 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042 0.2980 0.2880 0.2895 0.3135 0.2962 0.3220 0.3037 0.2937 0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042 0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113 0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993 0.3048 0.3207 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 0.3005 0.3415 0.3099 0.3509 0.3144 0.3186 0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261 0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120 0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369 0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245 0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180 0.3371 0.3490 0.3376 0.3616 0.3366 0.3369 0.3381 0.3762 0.3451 0.3554 0.3463 0.3687 0.3440 0.3428 0.3480 0.3840 0.3440 0.3427 0.3451 0.3554 0.3429 0.3307 0.3463 0.3687 0.3366 0.3369 0.3371 0.3490 0.3361 0.3245 0.3376 0.3616 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 0.3512 0.3465 0.3571 0.3907 0.3668 0.3957 0.3590 0.3521 0.3590 0.3521 0.3668 0.3957 0.3771 0.4034 0.3670 0.3578 0.3567 0.3389 0.3641 0.3804 0.3736 0.3874 0.3640 0.3440 0.3495 0.3339 0.3548 0.3736 0.3641 0.3804 0.3567 0.3389 0B 0S 1B 1S 2B 2S 3B 4B 4S Region 0C 0T 1C 1T 2C 2T 3R 4C 4T Region 0D 0U 1D 1U 2D 2U 3S 4D 4U Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 18 XLamp (R) XP-L LED Performance Groups - Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 Region x y 0.3686 0.3649 x y x y 0.3744 0.3685 0.3726 0.3612 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3702 0.3722 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3912 0.3917 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 5A2 5B2 5C2 5D2 6A2 6B2 6C2 6D2 7A2 Region 5A3 5B3 5C3 5D3 6A3 6B3 6C3 6D3 7A3 Region 5A4 5B4 5C4 5D4 6A4 6B4 6C4 6D4 7A4 Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 19 XLamp (R) XP-L LED Performance Groups - Chromaticity (continued) Region 7B1 7C1 7D1 8A1 8B1 8C1 8D1 x y 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 Region x y 0.4259 0.4073 x y x y 0.4322 0.4096 0.4281 0.4006 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4403 0.4049 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 0.4259 0.3853 0.4300 0.3939 0.4359 0.3960 0.4316 0.3873 0.4300 0.3939 0.4359 0.3960 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.4373 0.3893 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994 0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4465 0.4071 0.4513 0.4164 0.4573 0.4178 0.4523 0.4085 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 7B2 7C2 7D2 8A2 8B2 8C2 8D2 Region 7B3 7C3 7D3 8A3 8B3 8C3 8D3 Region 7B4 7C4 7D4 8A4 8B4 8C4 8D4 Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 20 XLamp (R) XP-L LED Cree's Standard Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 2C 1T 0.35 CCy 3B 2S 8000 K 0T 0.33 0S 0.32 0.31 2D 1C 0C 1D 0D 2U 2R 1A 0A 3R 2A 1B 0B 3A 2B 1S 0.34 ANSI C78.377A 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Neutral White 0.44 0.43 3500 K 6T 0.42 4000 K 0.41 4500 K 5T 0.40 5S 5000 K 0.39 CCy 6S 4T 5B3 5B2 4S 0.38 3T 3S 0.37 5A2 4B 3C 0.36 3B 3D 0.35 4D 4A 5A1 5B4 5D2 5A3 5A4 5C4 5C1 5D1 5D3 5D4 6B1 6A1 6A4 6D3 6D2 6A3 6A2 6C4 6C1 6B4 6D4 6D1 6U 6R 5U 5R 4U 3A 0.34 5B1 4C 6B2 5C3 5C2 6C3 6C2 6B3 ANSI C78.377A 4R 3U 3R 0.33 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 CCx Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 21 XLamp (R) XP-L LED Cree's Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued ANSI Neutral White and ANSI Warm White 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 0.41 6C2 6B3 0.40 6B2 5C3 0.39 5B3 5C4 5B4 0.38 5B1 4C 0.37 4D 3B 5D2 6D4 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8B1 7C4 8A3 8A2 8A4 8D1 8B3 8B2 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 6A2 7A2 6D3 6D2 6A3 5D3 5A3 5A2 4B 6B1 5C1 5B2 6C1 6B4 5C2 5000 K 7C1 7B4 7B1 6C4 7C2 7B3 7B2 6C3 4500 K 7C3 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 22 XLamp (R) XP-L LED Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 6500 K 0T 0C 0A 0S CCy 0.32 0.31 1R 0C 0D 0A 0U CCx CCx 0.40 0.40 5000 K 0.39 5000 K 0.39 0.38 5700 K 0.38 6500 K 0.36 2T 6500 K 8000 K 1U 0A 0R ANSI C78.377A 2R 1U 1R 0U 0.36 0.35 CCx 0.34 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 2U 0R 0.29 0.29 1D 1A 0D 0.30 0.29 0.28 0C 0B 0.31 1R 0U 0.30 0S 0.32 3R 2A 1B 0.33 0A ANSI C78.377A 2R 1A 0D 0T 0.33 2U 2D 1C 0.32 0B 0.31 1D 3A 2B 1S 0.31 0.32 2A 1B 0C 2C 8000 K 0.34 3B 2S 1T 3R 0.30 0S 2D 1C 0.29 0T 0.33 3A 2B 1S 2T E1 0.35 CCy 0.34 0.36 3B 2C 1T 3S 0.37 2S 0.35 5700 K 3S 50 0.37 CCy 0.36 0.30 0.29 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 0.29 0.29 1R 0R 0.29 0.28 1U 0U 0.30 0R ANSI C78.377A 2R 1A 0B 2U 1D 0.35 0.30 1U 3R 2A 1B 0.34 0.31 ANSI C78.377A 2R 1A 0D 2D 1C 0.33 0B 0T 3A 2B 1S 0.33 2U 1D 0.34 0.32 0S 0.32 3R 2A 1B 8000 K 2D 3B 2C 1T 3A 2B 1C 3S 2T 2S 0.35 0.31 0.33 0.36 3B 1T 1S 53 0.37 2C 8000 K 0.34 5700 K 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0.31 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 0A 2D 1C 1B 0B 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 23 XLamp (R) XP-L LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 0.36 E4 4B 3C 4D 3B 5B1 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6D2 6A3 5D3 6A2 6A4 6D1 7A4 7A1 6D4 7A3 7A2 6D3 7D1 8B2 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 8A4 8D1 8A1 7D4 8A3 8A2 7D3 7D2 8B1 7C4 7C1 7B4 7B1 6C4 6C1 6B4 5C4 6B1 5C1 5B4 4C 6B2 5C3 5C2 5B3 5B2 6C2 6B3 7C2 7B3 7B2 6C3 7C3 E8 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 F5 5000 K 0.39 F4 0.38 0.37 4B 3C 0.36 4D 3B 5B3 5C4 5C1 5B4 5D3 6A2 5B1 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6C2 6B3 6B4 6B1 6A3 6A4 7B2 6C3 6B2 5C3 5C2 5B2 4C F6 F7 6C1 6D2 6D1 7B1 6C4 6D3 6D4 7A2 7A1 7A4 F8 7A3 7D1 7C2 7B3 7B4 7C1 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 24 XLamp (R) XP-L LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 Z6 4000 K 0.41 Z5 4500 K 0.40 CCy Z7 3500 K 5C3 5000 K 0.39 5C2 5B3 0.38 4C 0.37 4B 3C 0.36 4D 3B 6B2 6B4 5C4 6B1 5C1 5B2 6C2 6B3 6A3 5B4 5D3 6A2 5D2 6A4 5A3 5D4 6A1 5A2 5D1 5A4 5A1 5B1 6C1 6D2 6D1 7B1 6C4 6D3 6D4 7A2 7A1 7A4 7B3 7B2 6C3 7B4 7A3 7D1 7C2 7C1 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 Z8 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 25 XLamp (R) XP-L LED Cree's Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 4000 K Z5 5A3, 5B4, 5C1, 5D2 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3500 K Z6 6A3, 6B4, 6C1, 6D2 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 3000 K Z7 7A3, 7B4, 7C1, 7D2 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2700 K Z8 8A3, 8B4, 8C1, 8D2 Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 26 XLamp (R) XP-L LED Bin and Order Code Formats XP-L bin codes and order codes are configured in the following manner: Order CodeBin Code Series XPL = XP-L Series XPL = XP-L Class 0 = High density H = High intensity Class 0 = High density H = High intensity CRI specification 0 = Cool White B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Luminous flux group CRI specification 0 = Cool White B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Chromaticity group SSSCCC-B-WWW-FFF-GN-AAAA SSSCCC-BD-HHHH-HHHNFFNNN Luminous flux group Internal code Internal code Chromaticity group Color AWT = White Color AWT = White Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 27 XLamp (R) XP-L LED Reflow Soldering Characteristics In testing, Cree has found XLamp XP-L LEDs to be compatible with JEDEC JSTD020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) IPC/JEDEC J-STD-020C Time Lead-Free Solder 1.2 C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 C Time Within 5 C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25 C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 28 XLamp (R) XP-L LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 29 XLamp (R) XP-L LED Notes - Continued UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 30 XLamp (R) XP-L LED 65 54 6 5 6 NOTICE NOTICE NOTICE CREE CONFIDENTIAL. PLOT INFORMATION CREE CONFIDENTIAL. THISTHIS PLOT ANDAND THETHE INFORMATION DENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN PROPRIETARY CONTAINED WITHIN ARE THETHE PROPRIETARY ANDAND WITHIN ARE THE PROPRIETARY ANDARE CONFIDENTIAL INFORMATION OF CREE, PLOT CONFIDENTIAL INFORMATION OF CREE, INC.INC. THISTHIS PLOT AL INFORMATION OF CREE, INC. THIS PLOT Mechanical Dimensions BEDISCLOSED COPIED, REPRODUCED OR DISCLOSED TO ANY MAYMAY NOTNOT BEOR COPIED, REPRODUCED TO ANY COPIED, REPRODUCED TO ANY OR DISCLOSED UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT UNAUTHORIZED PERSON THEWITHOUT WRITTEN CONSENT ZED PERSON THE WITHOUT WRITTEN CONSENT OF CREE OF CREE INC.INC. . 4 43 3 32 REV REVISO REV DESCRIPTION All measurements are .13 mm unless otherwise indicated. XP-L High Density D D XPLAWT-00-xxxx-xxxxxxxxx 2 REV 3.45 .2 mm BY DESCRIPTION 3.45mm .22.68 mm 3.45 .2 DATE APP'D .50 .58 3.30 3.30 3.30 2.68 2.68 2.30 2.30 2.30 .50 .58 .58 .50 .50 .50 .50 3.30 3.30 REF. REF. 3.30 REF. 3 R D 3.45 3.45 .2 mm .2 mm C C 3.30 3.30 3.30 REF. 3.30 3.30 REF. 6 5 4 2 1 R1.95R1.95 REVISONS R1.95 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION REV AREOPTICAL BY DATE APP'D DESCRIPTION OPTICAL OPTICAL CONTAINED WITHIN THE PROPRIETARY OPTICAL REFERENCEAND REFERENCE OPTICAL REFERENCE 1.30 1.30 CONFIDENTIAL INFORMATION OF CREE, INC.1.30 THIS PLOT REFERENCE REFERENCE 3.30 3.30 MAYTop NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY C Bottom View View Side View ALTERNATIVE UNAUTHORIZED PERSON THE WRITTEN CONSENT REF. REF.WITHOUT PRIMARY PRIMARY PRIMARY OF CREE INC. 3 3 ALT ALTERNAT ALTERNATIVE .50 .50 .50 .50 .50 Density .50 D views of the XP-L High Alternate bottom LED are shown in the diagrams below. .50 .50 .50 0 0 NATIVE 0 1 High Density REVISONS 2.68 3.45 .2 mm B D .64 2.30 ALTERNATIVE B 3.30 REF. 3.30 3.30 REF. REF. 3.30 3.30 B 3.30 3.30 3.30 REF. REF. 3.45 .2 mm C 1.30 1.30 .50 .58 .50 .25 .25 .25 3.30 3.30 3.30 3.30 .64 .64 AL .75 .75 .75 3.30 REF. C 3.30 1.01 1.01 ALL DIMENSIONS ALL DIMENSIONS ARE AR .1 1.01 ALL DIMENSIONS ARE .13MM UNLESS OTHERWISE NO 1.30 2.30 2.30 2.30 DATE BY 3.30 3.30 3.30 UNLESS OTHER UNLESS OTHERWIS UNLESS OTHERWISE DRAWN SPECIFIED 3.30 3.30 D. CRONIN3/26/14 A A3.30 DIMENSION DIMENSIONS ARE DIMENSIONS ARE IN CHECK DATE MILLIMETERS MILLIMETERS AND A MILLIMETERS AND AFTER FINISH. TOLERANCE UN TOLERANCE UNLES TOLERANCE UNLESS SPECIFIED: RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN .2 .XX .XX.25 .XX .25 DATE APPROVED PCB SOLDER PCB SOLDER PAD PADR1.95 RECOMMENDED PCB SOLDER RECOMMENDED PAD RECOMMENDED .1 .XXX .XXX .125 TITLE .XXX .125 (HATCHED AREA IS OPENING) (HATCHED AREA IS OPENING) (HATCHED AREA IS OPENING) X X .5 .5 ALTERNATIVE XTHIRD THIRD .5ANGLE ANGLE PROJECTION PROJECTION OUTL OPTICAL MATERIAL OPTICAL REFERENCE THIRD ANGLE PROJECTION FOR SHEET ME FOR SHEET METAL FOR SHEET ONLY 1.30 METAL PARTS 0 REFERENCE 1D .X SIZE .X 1.5 .X 1.5 ALTERNATIVE .XX .7 .XX .75 .XX .75 A ALTERNATIVE Bottom Bottom View Bottom View .XXX .XXXFINISH .25 .2 .XXX View .25 FINAL PROTECTIVE PRIMARY MARY X XC.5 .5 X .5 ARE .13MM UNLESS OTHERWISE NOTED SCALE 1.6 1.6 FINI 1.6 SURFACE SURFACE FINISH: SURFACE FINISH: 22.000 3.30 65 54 43 32 6 5 4 3 6 REF. DATE BY HERWISE DRAWN SPECIFIED 4600 Silicon Drive D. CRONIN3/26/14 Anode ONS ARE IN .50 Durham, N.C .50 27703 CHECK DATE S AND AFTER FINISH. Phone (919) 313-5300 UNLESS SPECIFIED: Fax (919) 313-5558 .50 .25 .64 APPROVED DATE A .64 TITLE .125 .5 OUTLINE DRAWING XPL B MATERIAL METAL PARTS ONLY 1.5 (R) REV. DRAWING NO. Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp(R) are registered trademarks and the Cree logo and SC5 SIZE 3.30 .75 B (R) .25 TechnologyTM are trademarks of Cree, Inc. UL2610-00040 and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not FINAL PROTECTIVE FINISH REF. C C .5 imply specific product and/or vendor endorsement, sponsorship or association. SCALE SHEET OF 1/1 1.6 INISH: 22.000 31 2 1 .25 .25 XLamp (R) XP-L LED 5 4 6 5 6 5 TICE NOTICE NOTICE TIAL. THIS AND THE INFORMATION E CONFIDENTIAL. THIS PLOT ANDPLOT THE INFORMATION CREEPLOT CONFIDENTIAL. THIS AND THE INFORMATION HIN ARE THE PROPRIETARY AND TAINED WITHIN ARE THE PROPRIETARY AND CONTAINED WITHIN ARE THE PROPRIETARY AND NFORMATION OF CREE, INC. THIS PLOT FIDENTIAL INFORMATION OF CREE, INC. THIS INC. PLOT CONFIDENTIAL INFORMATION OF CREE, THIS PLOT Mechanical Dimensions Continued PIED, REPRODUCED OR DISCLOSED TO ANY Y NOT MAY BE COPIED, REPRODUCED OR DISCLOSED TO ANY TO ANY NOT BE COPIED, REPRODUCED OR DISCLOSED PERSON THEWITHOUT WRITTEN CONSENT UTHORIZED PERSON THE WITHOUT WRITTEN CONSENTCONSENT UNAUTHORIZED PERSON THEWITHOUT WRITTEN CREE INC. OF CREE INC. 4 3 4 3 3 2 REV 2 REVISONS REVDESCRIPTION REV DES XP-L High Intensity XPLAWT-H0-xxxx-xxxxxxxxx D High Intensity 3.30 3.30 .50 3.45 3.45 2.30 3.45 .50 .50 3.30 .50 .50 2.30 2.30 .50 Anode 3.45 3.30 3.45 3.30 C TICAL ENCE OPTICAL REFERENCE OPTICAL OPTICAL REFERENCE REFERENCE OPTICAL OPTICAL REFERENCE1.0 REFERENCE Top View .50 .50 .50 1.0 .50 .50 .50 1.30 1.30 1.0 Bottom View Side View .50 .50 1.30 .50 .64 .64 .64 B 3.30 3.30 3.30 3.30 .25 3.30 .75 1.30 1.30 1.30 .25 .75 1.01 2.30 3.30 1.01 2.30 3.30 1.01 2.30 3.30 4 4 4 .25 .75 ALL DIMENSIONS ARE .13MM ALL DIMENSIONS ARE O .1 ALLUNLESS DIMENSIO DATE DRAWN BY DATE DRAWN BY DRA UNLESS OTHERWISE SPECIFIED OTHERWISE SPECIFIED UNLESS OTHERWISE SPEC D. CRONIN 3/13/15 D. CRONIN 3/13/1 DIMENSIONS UNLESS ARE IN D. CR DIMENSIONS ARE IN DIMENSIONS ARE IN CHECK DATE MILLIMETERS AND AFTER FINISH. 3.30 CHECK DATE CHEF MILLIMETERS AND AFTER FINISH. 3.30 MILLIMETERS AND AFTER 3.30 TOLERANCE UNLESS SPECIFIED: UNLESS SPECIFIED: TOLERANCE UNLESS SPEC .XX .25TOLERANCE APPROVED .XX .25DATE .XXAPPROVED .25 DATE APP RECOMMENDED STENCIL PATTERN RECOMMENDEDRECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN .XXX .125 PCB SOLDERPCB PADSOLDER RECOMMENDED PAD .XXX .125 .XXXTITLE .125 X .5 (HATCHED AREA(HATCHED IS OPENING) X .5 X .5 AREA IS OPENING) (HATCHED AREAANGLE IS OPENING) THIRD PROJECTION OUTLINE D MATERIAL THIRDFOR ANGLE PROJECTION THIRD ANGLE PROJECTION MATERIAL MAT SHEET METAL ONLY FORPARTS SHEET METAL PARTS ONLYPARTS FOR SHEET METAL .X 1.5 .X 1.5 .X 1.5 DRAW .XX .75 .XX PROTECTIVE .75 .XX SIZE .75 .XXX .25 FINAL 2 .XXX .25 .XXX FINAL FINISH .25 FINAL CPROTECTIV X .5 X .5 X SCALE .5 1.6 SURFACE FINISH: 1.6 22.000 SURFACE FINISH: 1.6 SURFACE FINISH: A 6 6 5 5 5 3 3 3 2 2 Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 32 C .50 OPTICAL REFERENCE XLamp (R) XP-L LED 3.45 3.30 OPTICAL Mechanical Dimensions - Continued REFERENCE XP-L High Density & High Intensity R1.53 1.30 .58 All measurements are .13 mm unless otherwise indicated. PRIMARY 3.50 3.30 .30 3.20 .50 .30 .72 .50 .72 .90 .25 3.50 3.30 3.20 .90 B A .25 .70 .50 1.30 1.50 Recommended Copper Layout Recommended Solder Pad RECOMMENDED SOLDER PAD (Solder Mask Pattern) (SOLDER RESIST PATTERN) RECOMMENDED COPPER LAYOUT .40 .96 Recommended Stencil Openings* RECOMMENDED STENCIL OPENINGS DRAWN UNLESS OTHERWISE SPECIFIED Notes: DIMENSIONS ARE IND. CRON CHECK MILLIMETERS AND AFTER FINISH ALL DIMENSIONS ARE thermal .13MMperformance. UNLESS OTHERWISE NOTED * Cree recommends using thermal pad kickouts to maximize component TOLERANCE UNLESS SPECIFIED .XX .25 APPROV * Cree recommends using white solder mask material to minimize system optical loss. .XXX .125 X .5 (R) ANGLE MATER * This stencil has been tested and optimized for the avoidance of voiding when using ALPHA(R)THIRD LUMET P30 PROJECTION MaxrelFOR solder paste. ForPARTS SHEET METAL ONLY .X your 1.5 other solder pastes, a "window pane" design for the thermal pad stencil may result in a lower voiding percentage. Contact local .XX .75 .XXX .25 FINAL PR Cree Field Applications Engineer for consultation regarding your specific application. X .5 6 5 4 3 1.6 SURFACE FINISH: Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 33 2 A XLamp (R) XP-L LED B Tape and Reel A All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 66 5 4 55 44 Except as noted, all dimensions in mm [inches] XP-L High Density NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND 6 CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT NOTICE MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION D UNAUTHORIZED UNAUTHORIZED PERSONWITHOUT WITHOUT THE THE WRITTEN CONSENT PERSON WRITTEN CONSENT CONTAINED WITHIN ARE THE PROPRIETARY AND OF CREE INC. OF CREE INC. CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT XPLAWT-00-xxxx-xxxxxxxxx 2.00 [.079] MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. DD 4.00 [.157] [.157] 4.00 Po Po O1.50 +.10 -.00 1.75 [.069] [.069] 1.75 E1 E1 CATHODESIDE SIDE CATHODE 1.75 [.069] E1 CATHODE SIDE C O1.50 5.50 [.217]F 5.50 [.217]F [.059] D1 MIN O1.50 O1.50 [.059] [.059] D1 D1 MIN MIN C CC ANODE SIDE 8.00 [.315] P ANODESIDE SIDE ANODE POCKET SIZE POCKET 3.60 mmSIZE [.142"] POCKET SIZE 3.60mm mm[.142"] [.142"] 3.60 3.00 mm [.118"] Ao 3.60 mm [.142"] 3.60mm mm[.142"] [.142"] 3.60 Ko-Ko [.142] 3.00 mm [.118"] 3.00 mm Ko3.60 -[.118"] 3.00 mm [.118"] 3.0 Bo - 10.25 [.404] E2 12.30 [.484] 12.00 [.472] 12.00 [.472] MAX 5.50 [.217]F NOMINAL NOMINAL W 10.25 10.25 [.404] [.404] E2 E2 12.30[.484] [.484] 12.30 O1.50 MAX MAX [.059] W W D1 8.00 [.315] P 8.00 [.315] [.315] 8.00 1.75.10 PP B 3.0 +.3 12.0 .0 3.60 [.142] Ao 12.00 [.472] NOMINAL .30 [.012] T 1.5.1 3.00 [.118] 8.0.1 Ko .30 [.012] T .30 [.012] [.012] .30 TT 2.5.1 3.00 [.118] Cathode Ko Side Anode Side B B 3.00 [.118] [.118] 3.00 3.0 Ko Ko BB 3.0 3.0 3.60 [.142] Ao Anode Side (denoted by + and circle) DATE UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED D. CRONIN 5/16/14 ARE IN DIMENSIONS DIMENSIONS ARE IN MILLIMETERS CHECK DATE AND AFTER FINISH. MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: .XX .25 .XX .25 DATE APPROVED .XXX .125 TITLE .XXX .125 X .5 ANGLE X THIRD .5 PROJECTION User Feed Direction A User Feed Direction D. CRONIN AA 6 5 5 4 Trailer Trailer 160mm (min) of 160 mm (min.) emptyof pockets empty pockets sealed with tape 55 sealed with tape (20 pockets min.) (20 pockets min.) 4 3 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION Loaded Pockets Loaded Pockets (1,000 Lamps) (500 Lamps) FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY .X.X 1.51.5 .XX .75.75 .XX .XXX .25.25 .XXX XX .5 .5 FINAL PROTECTIVE FINISH SURFACE FINISH: DATE DATE APPROVED APPROVED 3 MATERIAL MATERIAL 44 33 1.6 SCALE TITLE TITLE Leader C APPROVED DATE 4600 Silicon Drive Durham, N.C 27703 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558 Carrier Tape, XPL MATERIAL SIZE DRAWING NO. FINAL PROTECTIVE FINISH Carrier Tape, XPL 2402-00040 SCALE Fax (919) 313-5558 2 SHEET REV. DRAWING NO. C 4600 Silicon Drive 4600 Silicon Drive Durham, N.C 27703 REV. Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 2402-00040 Fax 1.000 (919) 313-5558 A 1.000 A A TITLE OF SHEET A 1 /1 A A OF 1 /1 1 1 CarrierTape, Tape,XPL XPL Carrier 2 Leader 400mm (min) of CC 400empty mm (min.) of with pockets 1.000 emptyatpockets with 1.000 least 100mm 22 at least 100 mm sealed by tape sealed by tape (50 empty pockets min.) (50 empty pockets min.) SIZE SIZE FINAL PROTECTIVE FINISH FINAL PROTECTIVE FINISH SCALE SCALE SURFACE FINISH: 1.61.6 SURFACE FINISH: 5/16/14 DATE START FOR SHEET METAL PARTS ONLY MATERIAL DATE DRAWN DATE DRAWN BYBY .X 1.5 .XX .75 CRONIN 5/16/14 D.D. CRONIN 5/16/14 .XXX SIZE .25 CHECK DATE CHECK DATE X .5 FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED .X ARE IN 1.5 DIMENSIONS DIMENSIONS ARE IN .XX .75 MILLIMETERS AND AFTER FINISH. MILLIMETERS AND .XXX AFTER FINISH. .25 TOLERANCE SPECIFIED: TOLERANCE UNLESS XUNLESS SPECIFIED: .5 .XX .25 .XX .25 1.6 SURFACE FINISH: .XXX .125 .XXX .125 XX .5 .5 DATE DRAWN BY CHECK START THIRD ANGLE PROJECTION 66 C CC MIN 3.60 [.142] [.142] 3.60 Ao END ENDAo 6 3.60 [.142] Bo 12.30 [.484] MAX W DRAWN BY A C 3.60 [.142] [.142] 3.60 3.0 Bo Bo 3.0 3.0 10.25 [.404] E2 3.60 mm [.142"] Bo ANODE SIDE 4.0.1 BB Bo Ao-Ao Ko Bo-Bo 12.00 [.472] NOMINAL 5.50 [.217]F B 3 O1.50 +.10 -.00 4.00 [.157] Po POCKET SIZE SECTION A-A Ao SCALE 23.60 : 1 mm [.142"] 4 1.75 [.069] O1.50 O1.50 DETAILE1B +.10 +.10 SCALE 2 :1 -.00 -.00 2.00 [.079] CATHODE P2 SIDE D 33 5 P2 High Density 4.00 [.157] 2.00 [.079] [.079] 2.00 Po P2 P2 3 REV. REV. DRAWING NO. DRAWING NO. 2402-00040 2402-00040 SHEET SHEET AA OFOF 1 1/1/1 11 User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 34 B XLamp (R) XP-L LED A Tape and Reel - Continued POCKET SIZE XP-L High Intensity SECTION A-AmmSIZE POCKET SIZE Ao - POCKET 3.70 [.146"] SCALE 2 : 1 XPLAWT-H0-xxxx-xxxxxxxxx High Intensity 4.00 [.157] Po 4.00 [.157] [.157] 4.00 Po Po 2.00 [.079] P2 2.00 [.079] [.079] 2.00 P2 P2 O 1.50 +.10 +.0039 -.00[.0591-.0000]Do DETAIL B +.10 +.0039 : 1 -.00[.0591-.0000]Do 1.50+.102+.0039 -.00[.0591-.0000]Do OOSCALE 1.50 Ao Bo -Ao 3.70 mm mm [.146"] [.146"] 3.70 Bo Ko-Bo 3.70 mm [.146"] [.146"] 1.20mm [.047"] POCKET SIZE 3.70 Ko -Ko 1.20 mm mm [.047"] [.047"] 1.20 Ao - 3.70 mm [.146"] 1.75 [.069] E1 1.75 [.069] 1.75 [.069] 2.00 [.079] E1 E1 +.10 +.0039 O 1.50 -.00[.0591-.0000]Do P2 CATHODE SIDE CATHODESIDE SIDE CATHODE 4.00 [.157] Po 5.50 [.217]F CATHODE SIDE 5.50 [.217]F [.217]F 5.50 O 1.50 [.059] 1.50 OOD1 1.50 MIN [.059] [.059] D1 D1 MIN MIN ANODE SIDE ANODE SIDE ANODE SIDE 8.00 [.315] P 8.00 [.315] [.315] 4.0.1 8.00 PP 1.75.10 ANODE SIDE 8.00 [.315] P 3.0 +.3 12.0 .0 10.25 [.404] E2 10.25 10.25 [.404] [.404] E2 E2 1.75 [.069] 12.00 [.472] E1 NOMINAL 12.00 [.472] [.472] 12.00 12.30 [.484] NOMINAL NOMINAL MAX 12.30W [.484] 12.30 [.484] MAX MAX 5.50 [.217]F W W O 1.50 [.059] D1 MIN 8.0.1 1.20 [.047] Ko 1.20 [.047] [.047] 1.20 Ko Ko 3.0 3.0 3.70 [.146] Ao 3.70 [.146] [.146] 3.70 Ao Ao 10.25 [.404] E2 Bo - 3.70 mm [.146"] Ko - 1.20 mm [.047"] 3.0 3.0 3.0 12.00 [.472] NOMINAL 3.70 [.146] Bo 3.70 [.146] [.146] 3.0 3.70 Bo Bo 3.70 [.146] Bo 12.30 [.484] MAX W 1.5.1 .30 [.012] T .30 [.012] [.012] .30 TT 2.5.1 Cathode Side Anode Side .30 [.012] T 1.20 [.047] Ko Anode Side 3.0 (denoted by + and circle) User Feed Direction END START 3.70 [.146] Ao Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 35 XLamp (R) XP-L LED Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo and SC5 TechnologyTM are trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 36 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: XPLAWT-00-0000-0000V4051 XPLAWT-00-0000-000HU50E7 XPLAWT-02-0000-000LV30Z5 XPLAWT-02-00000000V4053 XPLAWT-02-0000-000LU60E5 XPLAWT-02-0000-000BV30F5 XPLAWT-00-0000-000BV20F4 XPLAWT02-0000-000LV30E5 XPLAWT-00-0000-000HU50F6 XPLAWT-00-0000-000LV20Z5 XPLAWT-02-0000-000LU40Z8 XPLAWT-02-0000-000PU30F8 XPLAWT-00-0000-000UT50Z8 XPLAWT-02-0000-000HU60E5 XPLAWT-02-0000000UT50Z8 XPLAWT-02-0000-000LV20E6 XPLAWT-02-0000-000BV40E4 XPLAWT-00-0000-000BV40E4 XPLAWT00-0000-000LU60F6 XPLAWT-02-0000-000BV20E3 XPLAWT-02-0000-000UU20E8 XPLAWT-02-0000-000PT60F8 XPLAWT-00-0000-000HU60F7 XPLAWT-00-0000-000LV40F4 XPLAWT-02-0000-000LV20E3 XPLAWT-00-0000000LU60Z5 XPLAWT-00-0000-000LU50F6 XPLAWT-02-0000-000HV20E6 XPLAWT-00-0000-0000V5050 XPLAWT02-0000-000LV20F6 XPLAWT-02-0000-0000V3050 XPLAWT-02-0000-000HU40Z8 XPLAWT-02-0000-000PU20E7 XPLAWT-00-0000-0000V50E1 XPLAWT-00-0000-000LV20F4 XPLAWT-02-0000-000BV30E3 XPLAWT-00-0000000PU20Z7 XPLAWT-02-0000-0000V5050 XPLAWT-00-0000-000UU30E7 XPLAWT-02-0000-000UU30E7 XPLAWT00-0000-000LV30E5 XPLAWT-00-0000-000HV20E6 XPLAWT-00-0000-000LU40F7 XPLAWT-02-0000-000LU50F8 XPLAWT-02-0000-000HU60F6 XPLAWT-02-0000-000LU60F8 XPLAWT-02-0000-000PU20Z7 XPLAWT-00-0000000LU50Z6 XPLAWT-00-0000-000UT60F8 XPLAWT-00-0000-000LU60E5 XPLAWT-02-0000-0000V30E1 XPLAWT02-0000-0000V50E1 XPLAWT-00-0000-000LV20E3 XPLAWT-02-0000-000LU60E8 XPLAWT-02-0000-000HU50E8 XPLAWT-00-0000-000LU40Z8 XPLAWT-00-0000-000BV30E3 XPLAWT-00-0000-000PT50F8 XPLAWT-00-0000000BV40E3 XPLAWT-02-0000-000LU60Z7 XPLAWT-00-0000-000HU50Z6 XPLAWT-02-0000-000HU40E8 XPLAWT00-0000-000LV20E6 XPLAWT-00-0000-000HU40E8 XPLAWT-00-0000-000BV40F5 XPLAWT-00-0000-000HV30E5 XPLAWT-00-0000-000PT60E8 XPLAWT-00-0000-000UU20E7 XPLAWT-02-0000-000UU20E7 XPLAWT-00-0000000HU60Z6 XPLAWT-00-0000-000PT50E8 XPLAWT-02-0000-000LU50E7 XPLAWT-02-0000-000HU50Z8 XPLAWT02-0000-000PU30E8 XPLAWT-00-0000-000PU30E8 XPLAWT-00-0000-000UT50F8 XPLAWT-00-0000-000HU60Z5 XPLAWT-02-0000-0000V4051 XPLAWT-00-0000-000HU40Z7 XPLAWT-00-0000-000HU50E8 XPLAWT-00-0000000HU60F6 XPLAWT-00-0000-000PU20F8 XPLAWT-00-0000-0000V40E2 XPLAWT-00-0000-000LU50E8 XPLAWT00-0000-000HU60E5 XPLAWT-02-0000-000LU50Z8 XPLAWT-02-0000-000BU60Z5 XPLAWT-02-0000-000LV30E4 XPLAWT-02-0000-000LV20E5 XPLAWT-00-0000-000BV40F4 XPLAWT-02-0000-000HV20Z5 XPLAWT-02-0000000UU30F8 XPLAWT-00-0000-000LU50F8 XPLAWT-02-0000-000HU50E7 XPLAWT-00-0000-000LV30E4 XPLAWT00-0000-000LV20F6 XPLAWT-02-0000-000LU60E7 XPLAWT-00-0000-000BV20E5 XPLAWT-00-0000-000UT60E8 XPLAWT-02-0000-000UT50F8