DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
H
PETC-XX-XX-XX-01-X-RA-XX
POWER POSITIONS (PER END)
-01, -02, -04
RIGHT ANGLE
SIGNAL POSITIONS
-12
-40
PLATING SPECIFICATION
-S: SELECTIVE GOLD ON CONTACT/
MATTE TIN ON TAIL
-T: MATTE TIN
-L: LIGHT SELECTIVE GOLD ON CONTACT/
MATTE TIN ON TAIL
OPTION
-SD: SCREW DOWN
(SEE FIG 1, SHT 1)
-LC: LOCKING CLIP
(USE LC-11-TM)
(SEE FIG 2, SHT 2)
-01, -02, -04
POWER POSITIONS (PER END)
*
*
*
*
- SEE TABLE 1 FOR AVAILABLE COMBINATIONS
-01
LEAD STYLE
**
**
14.50 .571
REF
0.50
(TYP) REF
.020
5.72
(TYP)
.225
11.43 .450
(TYP)
2.54
(TYP)
.100
"B" (SEE TABLE 2)
22.86 .900
(9 SPACES @ 2.54 [.100])
2.54
(TYP)
.100
"D" (SEE TABLE 2)
3
MAX SWAY (TYP)
(EITHER DIRECTION)
"A"
"A"
"B""B"
PET-02-RA-SD-40
C
C
C
C
01
04
"C" (SEE TABLE 2)
3.81 .150
(TYP) REF
17.98 .708
REF
"A" REF (SEE TABLE 2)
23.50 .925
REF
DO NOT
SCALE FROM
THIS PRINT
"F"
"F"
6.60 .260
REF
1.17 .046
REF
0.64
(TYP) REF
.025
2.35
REF
.093
5.76
±0.20
.227
±.008
2.51
(TYP)
.099
SECTION "A"-"A"
SUB-T-1M34-01-XX
C
2.70
(TYP)
.106
SECTION "B"-"B"
C
6.60
(TYP)
.260
2.35
(TYP) REF
.093
0.64
SQ REF
.025
5.76
±0.20
.227
±.008
2.54
(TYP)
.100
2.54
(TYP)
.100
SECTION "F"-"F"
T-1S64-11-X
T-1S64-12-X
T-1S64-13-X
T-1S64-14-X
C
C
FIG 1
PETC-01-40-01-X-RA-SD SHOWN
MAX
- BLANK ONLY FOR EXISTING CUSTOMERS
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
0.3 [.01] 2
.XX:
0.13 [.005]
.XXX:
0.051 [.0020]
MATERIAL:
RIGHT ANGLE POWER TERMINAL
BY:
PETC-XX-XX-XX-01-X-RA-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CLAY W
1/12/2006
2
1
SHEET SCALE: 1:0.666667
INSULATOR: LCP
, COLOR: BLACK
TERMINAL: COPPER ALLOY
F:\DWG\MISC\MKTG\PETC-XX-XX-XX-01-X-RA-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.038[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: 2.22N [.5 LB].
4. PARTS TO BE PACKAGED IN TRAYS.
5. PARTS PLACED IN TRAY WITH PIN #1 FACING
THE RIGHT SIDE, DUE TO PIN NUMBERING ORDER.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
H
3.50 .138
2.75 .108
(MEASURE AT TIP OF PIN)
"C" (SEE TABLE 2)
3
MAX SWAY (TYP)
(EITHER DIRECTION)
PET-02-RA-LC-40
LC-11-TM
C
8.23 .324
REF
FIG 2
PETC-01-40-01-01-X-RA-LC SHOWN
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
0.64
(TYP) REF
.025
3
MAX SWAY (TYP)
(EITHER DIRECTION)
6.35
(TYP)
.250
"B" (SEE TABLE 2)
"A" REF (SEE TABLE 2)
"D" (SEE TABLE 2)
FIG. 3
PETC-02-40-02-01-X-RA-SD SHOWN
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
C
PET-04-RA-SD-40
"B" (SEE TABLE 2)
6.35
(TYP)
.250
"A" REF (SEE TABLE 2)
"D" (SEE TABLE 2)
FIG. 4
PETC-04-40-04-01-X-RA-SD SHOWN
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
C
PET-08-RA-SD-40
SHEET OF
RIGHT ANGLE POWER TERMINAL
BY:
PETC-XX-XX-XX-01-X-RA-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CLAY W
1/12/2006
2
2
SHEET SCALE: 1.5:1
REVISION H
F:\DWG\MISC\MKTG\PETC-XX-XX-XX-01-X-RA-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
