37793 - Desco - Datasheet.Directory

PROTEKTIVE PAK

13520 MONTE VISTAAVENUE, CHINO, CA 91710

PHONE (909) 627-2578, FAX (909) 363-7331

ProtektivePak.com

DRAWING NUMBER

37790 DATE:

September

2007

TUBE HANDLERS

Employee Owned

SPECIFICATIONS

Properties Typical Values Test Procedures/Method

Electrostatic Decay 0.01 seconds at 72°F and 11.8% R.H. FED-STD-101, Method 4046

Surface Resistance 10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 10E3 - 10E4

ohms/sq. for buried shielding layer ASTM D257

Surface Resistance, Low R.H. Cut-off 4% R.H. Rockwell International Test Report of December 20, 1991

High-Voltage Discharge Resistance Failure rate 0/5 (no oxide damage in five consecutive tests) Rockwell International Test Report of December 20, 1991

Static Shielding 99.9% attenuation at 10kV; 99.6% attenuation at 30kV EIA 541, appendix E, capacitive probe test

Charged Device Model (CDM) Safety RTG >10E7 ohms at 86% R.H. or less Rockwell International Test Report of December 20, 1991

Current-Carrying Hazard 10E3 mA at 110V; 10E3 mA at 220V ESD from A to Z

Corrosivity Contains 1-3 ppm reducible sulfur FED-STD-101, Method 3005 for reducible sulfur

Antistat Transfer No transfer Rockwell International Test Report of January 8, 1992

Water & Isopropyl Alcohol Extraction Surface resistance 10E8 - 10E9 ohms/square at 74°F Rockwell International Test Report of January 8, 1992

Tests for Antistat Permanence and 36% R.H.

Sloughing Test Negligible surface damage at 10 cycles and <5% of surface damage at 200 ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and

cycles in Taber Abrasion Test. No conductive particles abrased from surface 1000 grams load

Rockwell International Test Report of January 8, 1992

Recyclability Complete recyclability of package Rockwell International Test Report of January 8, 1992

Biodegradability Biodegradation in or on moist soil

Volume Conductivity Conductivity from wall to wall as well as across surface to assure permanence Rockwell International Test Report of January 8, 1992

of the antistatic property

Shelf Life Indefinite

Made in America

Features

• Economical and efficient way to store and transport DIP Tubes

and Rails

• Each cell has an extender tab which may be labeled to identify

the contents

• Tube Handler may be rotated on shelves to view the extender

tab either vertically or horizontally

• Cell identification labels included

• Shipped knocked-down; easy to assemble

• Made in America

------------------

-----------------

RoHS Compliance Statement

None of the following materials are

intentionally added in manufacturing

this product: lead, mercury, cadmium,

hexavalent chromium, polybrominated

biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE) as outlined in

the Directive 2002/95/EC Article 4.1.

See Protektive Pak Inc. letter on-line at

ProtektivePak.com.

See reverse side

for available sizes.