500 mW GLASS AXIAL-LEAD LOW NOISE
ZENER DIODES
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright © 2005
6-09-2005 REV D
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N4099 thru 1N4135-1, e3 and
1N4614 thru 1N4627-1, e3 DO-35
1N4099–1N4135-1, e3 &
1N4614–1N4627-1, e3 (DO-35)
135-1, e3 &
1N4614–1N4627-1, e3 (DO-35)
DESCRIPTION APPEARANCE
The popular 1N4099 thru 1N4135 and 1N4614 thru 1N4627 series of 0.5 wat
Zener Voltage Regulators provide a selection from 1.8 to 100 volts in standard
5% tolerances as well as tighter tolerances identified by different suffix letters
on the part number. These glass axial-leaded DO-35 Zeners are optionall
available with an internal-metallurgical-bond by adding a “-1” suffix and ma
also be provided as RoHS Compliant with an added e3 suffix. Microsemi also
offers numerous other Zener products to meet higher and lower powe
applications.
DO-35
(DO-204AH)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES APPLIC ATIONS / BENEFITS
• JEDEC registered 1N4099 thru 1N4135 and 1N4614
thru 1N4627 series
• Internal metallurgical bond o ption available by
adding a “-1” suffix
• Commercial Surface Mount also available in
separate data sheet as 1N4099UR to 1N4135UR,
and 1N4614UR to 1N4627UR in DO-213AA
package (consult factory for others)
• DO-7 glass body axial-leaded Zener equivalents are
also available
• Consult separate data sheets for the military JAN,
JANTX, and JANTXV qualified versions on the
Microsemi website
• RoHS Compliant devices a v ailable by adding
“e3” suffix
• Regulates voltage over a broad operating
current and temperature range
• Extensive selection from 1.8 to 100 V
• Standard voltage tolerances are plus/minus 5%
with no suffix
• Tight tolerances available in plus or minus 2%
or 1% with C or D suffix respectively
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method
1020
• Minimal capacitance (see Figure 3)
• Inherently radiation hard as described in
Microsemi MicroNote 050
MAXIMUM RAT ING S MECHANICAL AND PACKAGING
• Operating and Storage temperature: -65ºC to
+175ºC
• Thermal Resistance: 250 ºC/W junction to lead at
3/8 (10 mm) lead length from body, or 310ºC/W
junction to ambient when mounted on FR4 PC board
(1 oz Cu) with 4 mm2 copper pads and track width 1
mm, length 25 mm
• Steady-State Power: 0.5 watts at TL < 50oC 3/8 inch
(10 mm) from body or 0.48 W at TA < 25ºC when
mounted on FR4 PC board as described for thermal
resistance above (see Figure 2 for derating)
• Forward voltage @200 mA: 1.1 volts
• Solder Temperatures: 260 ºC for 10 s (max)
• CASE: Hermetically sealed axial-lead glass
DO-35 (DO-204AH) package
• TERMINALS: Tin-lead plated or RoHS compliant
annealed matte-tin plated solderable per MIL-
STD-750, method 2026
• POLARITY: Cathode indicated by band where
diode is to be operated with the banded end
positive with respect to the opposite end for Z ener
regulation
• MARKING: Part number
• TAPE & REEL option: Standard per EIA-296
(add “TR” suffix to part number)
• WEIGHT: 0.2 grams
• See package dimensions on l ast page