2843002702 - FAIR-RITE PRODUCTS - Datasheet.Directory

Multi- Aperture cores (2843002702)

Part Number: 2843002702

43 MULTI- APERTURE CORE

Explanation of Part Numbers:

– Digits 1 & 2 = Product Class

– Digits 3 & 4 = Material Grade

– Last digit 2 = Burnished

Multi- aperture cores are used in suppression applications and in balun (balance- unbalance) and other broadband

transformers. They are also employed in airbag designs to prevent accidental activation.

All multi- aperture cores are supplied burnished.

Our “Multi- Aperture Core Kit” (part number 0199000036) is available for prototype evaluation.

For any multi- aperture requirement not listed here, feel free to contact our customer service group for availability and

pricing.

Catalog Drawing

3D Model

Weight: 0.3 (g)

Chart Legend

+ Test frequency

Typical Impedance (Ω)

25 MHz 37

100 MHz+50

Multi- aperture cores in 73 and 43 materials are controlled for impedance only. The 61 NiZn material is controlled for both

impedance and AL value. The high frequency 67 material is controlled for AL value. Minimum impedance values are specified for

the + marked frequencies. The minimum impedance is typically the listed impedance less 20%.

Multi- aperture cores in 73 and 43 material are measured for impedance on the 4193A Vector Impedance Analyzer. The 61 and 67

multi- aperture cores are tested on the 4291A Impedance Analyzer. All impedance measurements are performed with a single turn

to both holes, using the shortest practical wire length.

The 61 and 67 material multi- hole beads are tested for AL value. The test frequency is 10 kHz at < 10 gauss. The test winding is

five turns wound through both holes.

Dim mm mm tol nominal inch inch misc.

A 7 ±0.25 0.276 _

B 3.1 ±0.25 0.122 _

C 4.2 -0.25 0.16 _

E 2.9 ±0.10 0.114 _

H 1.7 +0.20 0.071 _