GBU2502 THRU GBU2510 25A BRIDGE RECTIFIER . GBU : Outline Dimensions and Mark, Features Io 25A 200V~1000V VRRM Glass passivated chip High surge forward current capability Unitmm Applications General purpose 1 phase Bridge rectifier applications Limiting ValuesAbsolute Maximum Rating GBU25 Symbol Unit Item Storage Temperature Junction Temperature Repetitive Peak Reverse Voltage Average Rectified Output Current Conditions Tstg -40 ~+150 Tj +150 VRRM V 200 400 600 800 1000 Io A With heatsink Tc=98 50HZ sine wave, R-load Without heatsink Ta=25 Surge(Non-repetitive)Forward Current Dielectric Strength Mounting Torque 02 04 06 08 10 IFSM A Vdis kV TOR kg*cm 50HZ sine wave, 1 cycle, Ta=25 Terminals to caseAC 1 minute Recommend torque5kg*cm 25 3.5 300 2.5 8 Electrical CharacteristicsTa=25 Unless otherwise specified Item Peak Forward Voltage Peak Reverse Current Symbol Unit VFM V IRRM1 A RJ-A Thermal Resistance RJ-L RJ-C Test Condition IFM=12.5A, Pulse measurement, Rating of per diode VRM=VRRM , Pulse measurement, Rating of per diode Between junction and ambient, Without heatsink /W Between junction and lead, Without heatsink Between junction and case, With heatsink Max 1.1 10 22 4.2 5 Characteristics(Typical) 60 50 IFA PW 20 50 Ta=150 10 40 5 2 30 Ta=25 1 20 0.5 pulse test per one diode 0.2 0.1 0.4 10 sine wave Ta=150 0 0.5 0.6 0.7 0.8 0.9 1 1.1 0 1.2 2 4 6 8 10 12 IOA VFV P-IO Curve Forward Characteristics 300 4 sine wave IOA IFSM IFSM A 0 14 on glass-epoxi substrate 10ms 10ms 250 3 1cycle + 200 2 150 1 P.C.B. soldering land 5mm sine wave R load free in air - non-repetitive Ta=25 0 100 1 2 5 10 20 50 100 0 40 80 Number of Cycles 25 TC TC heatsink 20 15 sine wave,R load With heatsink - 10 80 90 160 Ta IO-Ta IO-Ta Curve Surge Forward Current Capability IOA 120 100 110 120 IO-TC Curve 130 140 150 160 TC DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.