Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series TMOV and iTMOV Varistor Series (R) (R) RoHS Description The Littelfuse TMOV(R) and iTMOV(R) thermally protected varistors represent a new development in integrated circuit protection. Both versions are comprised of radial leaded Metal Oxide Varistors (MOVs) with an integrated thermally activated element designed to open in the event of overheating due to the abnormal overvoltage, limited current, conditions outlined in UL1449. The TMOV(R) and iTMOV(R) varistor's integrated thermal element, in conjunction with appropriate enclosure design, helps facilitate SPD module compliance to UL1449 for both cord connected and permanently connected applications. Agency Approvals Agency Agency Approval Agency File Number UL1449 E320116 QC 42201-C001, QC 42201-A001, IEC 60950-1 (Annex Q) IECQ-C BSI 15.0009 IEC 61051-1, IEC 61051-2, IEC 60950-1 (Annex Q) 40021525 Additional Information Datasheet iTMOV Datasheet TMOV Resources iTMOV Resources TMOV The TMOV(R) and iTMOV(R) varistors offer quick thermal response due to the close proximity of the integrated thermal element to the MOV body. The integrated configuration also offers lower inductance than most discrete solutions resulting in improved clamping performance to fast overvoltage transients. The iTMOV(R) varistor differs from the TMOV(R) varistor by the inclusion of a third lead for the purpose of indicating that the MOV has been disconnected from the circuit. This lead facilitates connection to monitoring circuitry. Additionally TMOV(R) and iTMOV(R) varistors are wave solderable, thus simplifying end product assembly by reducing the the expense and rework associated with hand soldering operations. Features * RoHS compliant and Lead-free available * -55C to +85C operating temp range * Designed to facilitate compliance to UL1449 for SPD products * Three-lead version available for indication purposes * High peak surge current rating up to 10kA * Wave solderable * Standard lead form and spacing option Samples iTMOV Samples TMOV Applications * SPD Products * * AC Panel Protection Modules GFCI (Ground Fault Current Interupter) * * AC Line Power Supplies UPS (Uninterruptable Power Supply) * Surge Protected Strip Connectors * White Goods * Plug-in SPD * AC Power Meters * Inverters * Relocatable AC Power Taps * AC/DC Power Supplies (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series Absolute Maximum Ratings * For ratings of individual members of a series, see Device Ratings and Specifications chart Continuous Steady State Applied Voltage: AC Voltage Range (VM(AC)RMS) Transient: Peak Pulse Current (ITM) - For 8x20s Current Wave, single pulse Single-Pulse Energy Capability - For 2ms Current Wave Operating Ambient Temperature Range (TA) Storage Temperature Range (TSTG) Temperature Coefficient (V) of Clamping Voltage (VC) at Specified Test Current Hi-Pot Encapsulation (COATING Isolation Voltage Capability) Thermal Protection Isolation Voltage Capability (when operated) COATING Insulation Resistance Indicator Lead Rating (Lead-3 - iTMOV(R) varistor only): Continuous RMS current Surge Current, 8/20s TMOV(R) and iTMOV(R) Varistor Series Units 115 to 750 V 6,000 to 10,000 35 to 480 -55 to +85 -55 to +125 <0.01 2,500 600 1,000 A J C C %/C V V M 100 10,000 mA A CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Ratings & Specifications TMOV(R) Varistor Lead-free And RoHS Compliant Models iTMOV(R) Varistor Lead-free and RoHS Compliant Models Part Number Branding Part Number Branding TMOV14RP115E TMOV20RP115E TMOV14RP130E TMOV20RP130E TMOV14RP140E TMOV20RP140E TMOV14RP150E TMOV20RP150E TMOV14RP175E TMOV20RP175E TMOV14RP200E TMOV20RP200E TMOV14RP230E TMOV20RP230E TMOV14RP250E TMOV20RP250E TMOV14RP275E TMOV20RP275E TMOV14RP300E TMOV20RP300E TMOV14RP320E TMOV20RP320E TMOV14RP385E TMOV20RP385E TMOV14RP420E TMOV20RP420E TMOV14RP460E TMOV20RP460E TMOV14RP510E TMOV20RP510E TMOV14RP550E TMOV20RP550E P4T115E P2T115E P4T130E P2T130E P4T140E P2T140E P4T150E P2T150E P4T175E P2T175E P4T200E P2T200E P4T230E P2T230E P4T250E P2T250E P4T275E P2T275E P4T300E P2T300E P4T320E P2T320E P4T385E P2T385E P4T420E P2T420E P4T460E P2T460E P4T510E P2T510E P4T550E P2T550E TMOV14RP115M TMOV20RP115M TMOV14RP130M TMOV20RP130M TMOV14RP140M TMOV20RP140M TMOV14RP150M TMOV20RP150M TMOV14RP175M TMOV20RP175M TMOV14RP200M TMOV20RP200M TMOV14RP230M TMOV20RP230M TMOV14RP250M TMOV20RP250M TMOV14RP275M TMOV20RP275M TMOV14RP300M TMOV20RP300M TMOV14RP320M TMOV20RP320M TMOV14RP385M TMOV20RP385M TMOV14RP420M TMOV20RP420M TMOV14RP460M TMOV20RP460M TMOV14RP510M TMOV20RP510M TMOV14RP550M TMOV20RP550M P4T115M P2T115M P4T130M P2T130M P4T140M P2T140M P4T150M P2T150M P4T175M P2T175M P4T200M P2T200M P4T230M P2T230M P4T250M P2T250M P4T275M P2T275M P4T300M P2T300M P4T320M P2T320M P4T385M P2T385M P4T420M P2T420M P4T460M P2T460M P4T510M P2T510M P4T550M P2T550M (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Maximum Rating (85C) Continuous Transient Disc Diameter (mm) 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 14 20 AC Volts DC Volts VM(AC)RMS VM(DC) (V) 115 115 130 130 140 140 150 150 175 175 200 200 230 230 250 250 275 275 300 300 320 320 385 385 420 420 460 460 510 510 550 550 (V) 150 150 170 170 180 180 200 200 225 225 260 260 300 300 320 320 350 350 385 385 420 420 505 505 560 560 610 610 670 670 715 715 Specifications (25C) Varistor Maximum Typical Voltage at Clamping CapaciEnergy Peak Surge 1mA Test Voltage tance 2ms Current 8/20s Current 8/20s f = 1MHz ITM 1 x ITM 2 x VN(DC) VN(DC) WTM IPK C VC Pulse Pulse Min Max (J) (A) (A) (V) (V) (A) (pF) 35 6000 4500 162 198 300 50 1100 52 10000 6500 162 198 300 100 2400 50 6000 4500 184.5 225.5 340 50 1000 100 10000 6500 184.5 225.5 340 100 1900 55 6000 4500 198 242 360 50 900 110 10000 6500 198 242 360 100 1750 60 6000 4500 216 264 395 50 800 120 10000 6500 216 264 395 100 1600 70 6000 4500 243 297 455 50 700 135 10000 6500 243 297 455 100 1400 75 6000 4500 283 345 530 50 630 154 10000 6500 283 345 530 100 1250 80 6000 4500 324 396 595 50 550 160 10000 6500 324 396 595 100 1100 100 6000 4500 351 429 650 50 500 170 10000 6500 351 429 650 100 1000 110 6000 4500 387 473 710 50 450 190 10000 6500 387 473 710 100 900 125 6000 4500 423 517 775 50 400 250 10000 6500 423 517 775 100 800 136 6000 4500 459 561 840 50 380 270 10000 6500 459 561 840 100 750 150 6000 4500 558 682 1025 50 360 300 10000 6500 558 682 1025 100 700 160 6000 4500 612 748 1120 50 300 320 10000 6500 612 748 1120 100 600 180 6000 4500 675 825 1240 50 220 360 10000 6500 675 825 1240 100 200 185 6000 4500 738 902 1355 50 200 325 10000 6500 738 902 1355 100 350 190 6000 4500 819 1001 1500 50 180 360 10000 6500 819 1001 1500 100 300 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series Ratings & Specifications Maximum Rating (85C) Continuous Transient TMOV(R) Varistor Lead-free And RoHS Compliant Models iTMOV(R) Varistor Lead-free and RoHS Compliant Models Part Number Branding Part Number Branding TMOV14RP575E TMOV20RP575E TMOV14RP625E TMOV20RP625E TMOV14RP750E TMOV20RP750E P4T575E P2T575E P4T625E P2T625E P4T750E P2T750E TMOV14RP575M TMOV20RP575M TMOV14RP625M TMOV20RP625M TMOV14RP750M TMOV20RP750M P4T575M P2T575M P4T625M P2T625M P4T750M P2T750M Disc Diameter AC Volts VM(AC)RMS (mm) 14 20 14 20 14 20 Thermal Characteristics (V) 575 575 625 625 750 750 Specifications (25C) Typical Varistor Voltage Maximum Capaciat 1mA Test Clamping DC Energy Peak Surge tance Current Voltage 8/20s Volts 2ms Current 8/20s f = 1MHz ITM 1 x ITM 2 x VN(DC) VM(DC) WTM Max VC IPK C V Pulse Pulse Min N(DC) (V) (J) (A) (A) (V) (V) (A) (pF) 730 195 6000 4500 857 1047 1568 50 170 730 375 10000 6500 857 1047 1568 100 275 825 200 6000 4500 900 1100 1650 50 160 825 400 10000 6500 900 1100 1650 100 250 970 210 6000 4500 1080 1320 1980 50 140 970 480 10000 6500 1080 1320 1980 100 175 Current, Energy, Power Derating Curve 10 100 PERCENT OF RATED VALUE Typical 5A 2.5A 0.5A 0.125A 1 0.1 10 100 1000 * Figure 4: Typical time to open circuit under UL1449 Overvoltage Limited Current Test in conjunction Note : TheAbnormal TMOV(R) and iTMOV(R) varistors are intended, with appropriate enclosure design, to help facilitate SPD module compliance to UL 1449, 3rd Edition Section 39.4 (abnormal overvoltage limited current requirements). Under these extreme abnormal overvoltage conditions, some units will exhibit substantial heating, arcing and venting prior to opening. Modules should be designed to contain this possibility. Application testing is strongly recommended. 50 60 70 80 90 100 110 120 130 AMBIENT TEMPERATURE ( oC) For applications exceeding 85C ambient temperature, the peak surge current and energy ratings must be reduced as shown above. 10000 Maximum Clamping Voltage 750V 625V 575V 550V 510V 460V 420V 385V 320V 300V 275V Maximum Leakage Current Clamping Voltage (V) Clamping Voltage (V) 20 Figure 2 Maximum Clamping Voltage Maximum Leakage Current 40 Maximum Clamping Voltage for 20mm Parts Maximum Clamping Voltage for 14mm Parts 10000 60 0 -55 10000 Time(s) Figure 1 80 1000 100 0.000001 0.00001 0.0001 0.001 0.01 250V 230V 200V 175V 150V 140V 130V 115V 0.1 1 10 100 250V 230V 200V 175V 150V 140V 130V 115V 0.1 1 10 100 1000 10000 Peak Current (A) Peak Current (A) Figure 4 Figure 6: V-I Characteristic Curves for 14mm Types 1000 100 0.000001 0.00001 0.0001 0.001 0.01 1000 10000 Figure 3 625V 750V 575V 550V 510V 460V 420V 385V 320V 300V 275V Figure 7: V-I Characteristic Curves for 20mm Types (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series Repetitive Surge Capability for 20mm Parts Repetitive Surge Capability for 14mm Parts 10000 1 2 10000 15 1 102 15 10 10 10 1000 2 10 4 3 10 1000 5 10 6 10 Peak Current (A) Peak Current (A) 2 3 100 4 10 5 106 100 10 10 1 1 10 100 Figure 5 1000 10 10000 100 Figure 6 Impulse Duration (s) 1000 10000 Impulse Duration (s) NOTE: Average power dissipation of transients should not exceed 1.0W NOTE: Average power dissipation of transients should not exceed 0.6W Figure 8: Pulse Rating Curves for 14mm types Figure 9: Pulse Rating Curves for 20mm types Wave Solder Profile Because the TMOV(R) and iTMOV(R) varistors contain a thermal protection device, care must be taken when soldering the devices into place. Two soldering methods are possible. Firstly, hand soldering: It is recommended to heat-sink the leads of the device. Secondly, wave soldering: It is critically important that all preheat stage and the solder bath temperatures are rigidly controlled. Lead-free Profile Non Lead-free Profile 300 300 250 TEMPERATURE (C) TEMPERATURE (C) Maximum Wave 260C Maximum Wave 240C 250 200 150 100 200 150 100 50 50 0 0 0 0.5 1 Figure 7 1.5 2 2.5 3 3.5 TIME(MINUTES) Physical Specifications 4 Figure 8 0 0.5 1 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Environmental Specifications Operating/Storage Temperature -55C to +85C Humidity Aging +85C, 85% RH , 1000 hours +/-10% typical voltage change Thermal Shock Cured, flame retardant epoxy polymer meets UL94 V-0 requirements +85C to -55C 5 times +/-10% typical voltage change Solvent Resistance MIL-STD-202, Method 215 Marked with LF, voltage, UL/CSA logos, and date code Moisture Sensitivity Level 1, J-STD-020 Lead Material Copper clad steel wire Soldering Characteristics Solderability per MIL-STD-202, Method 208 Insulating Material Device Labeling (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series Lead Configurations TMOV(R) Varistor iTMOV(R) Varistor 2 Thermal Fuse Element Thermal Fuse Element 3 Monitor Lead MOV 3 Line Fuse 1 2 MOV 1 iTMOV Varistor Monitor LeadLED Note: MOVs are non-polarized passive elements To Protected Circuit Line R iTMOV(R) Varistor Application Examples Neutral (R) The application examples below show how the indicator lead on the iTMOV be1 used to indicate that the Figure 1. varistor Application can example thermal element has been opened. This signifies that the circuit is no longer protected from transients by the MOV. Line In this case, the LED is normally on, and is off when the thermal element opens. To Protected Circuit Line Line Fuse iTMOV Varistor LED Line To Protected Circuit R Line Fuse Neutral Application Example 2 LED Line Line Fuse AC OPTOCOUPLER Line AC OPTOCOUPLER Line Fault LED (Normallyoff) R Neutral Figure 3. Application example 3 Please note: Indicator circuits are provided as a guideline only. Verification of actual indicator circuitry is the responsibility of the end user. Component values selected must be appropriate for the specific AC line voltage service and application. To Protected Circuit TO STATUS ANNUNCIATOR LIGHT/ALARM Load Switch Relay (loss of protection) Line Fuse Neutral "Load Powered" neon lamp Figure 2. Application example 2 iTMOV Varistor Fault LED (Normallyoff) "Load Powered" neon lamp Figure 3. Application example 3 iTMOV Varistor Fault LED (Normallyoff) R To Protected Circuit Load Switch Relay R (loss of protection) Line Fuse Neutral Neutral iTMOV Varistor To Protected Circuit R Load Switch Relay (loss of protection) "Load Powered" neon lamp TO STATUS ANNUNCIATOR LIGHT/ALARM Line Fuse Neutral Line Line R This circuit utilizes an optocoupler to provide Neutral galvanic isolations between the iTMOV(R) varistor Figure 1. Application example 1 and the indicating or Varistor alarm circuitry. R iTMOV Figure 2. Application example 2 iTMOV Varistor This circuit illustrates the use of the monitoring lead of to ensure that equipment is only the iTMOV(R) varistor iTMOV Varistor R operated when overvoltage protectionACpresent. OPTOCOUPLER In normal operation the load switch relay solenoid is powered TO STATUS via the ANNUNCIATOR LIGHT/ALARM indicator lead of the iTMOV(R) varistor. In the event of the Neutral thermal element being activated, the relay will de-activate, cutting power to theexample protected circuit and the fault LED will Figure 2. Application 2 illuminate. Line Fuse To Protected Circuit Figure 1. Application example 1 iTMOV Varistor To Protected Circuit Application Example 3 Line Fuse To Protected Circuit Application Example 1 (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series Device Dimensions Curved Lead Forms TMOV(R) Varistor iTMOV(R) Varistor Straight Lead Forms TMOV Varistor iTMOV Varistor (R) (R) Dia D (outer crimp) (inner crimp) Dia D Dia D Dia D A A Monitor Lead L3 Seating L Plane L Dia c Dia b Dia b E E e Dimension Dia c e3 Dia b VRMS Voltage Model e1 e2 E e1 e1 e TMOV(R) Varistor 14mm Size e3 Dia b E e Monitor Lead L3 e e1 e2 iTMOV(R) Varistor 20mm Size 14mm Size 20mm Size Min. mm (in) Max. mm (in) Min. mm (in) Max. mm (in) Min. mm (in) Max. mm (in) Min. mm (in) Max. mm (in) ALL 17.0 (0.669) 22.0 (0.866) 23.0 (0.906) 28.0 (1.10) 17.0 (0.669) 22.0 (0.866) 23.0 (0.906) 28.0 (1.10) ALL -- 22.5 (0.886) -- 31.0 (1.221) -- 22.5 (0.886) -- 31.0 (1.221) Dia D ALL 13.5 (0.531) 17.0 (0.669) 19.0 (0.748) 23.0 (0.906) 13.5 (0.531) 17.0 (0.669) 19.0 (0.748) 23.0 (0.906) e ALL 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335) 115-175 1.5 (0.059) 4.0 (0.157) 1.5 (0.059) 4.0 (0.157) 1.5 (0.059) 4.0 (0.157) 1.5 (0.059) 4.0 (0.157) e1 200-275 2.0 (0.079) 4.5 (0.177) 2.0 (0.079) 4.5 (0.177) 2.0 (0.079) 4.5 (0.177) 2.0 (0.079) 4.5 (0.177) Bulk Pack 300-420 3.0 (0.118) 5.5 (0.217) 3.0 (0.118) 5.5 (0.217) 3.0 (0.118) 5.5 (0.217) 3.0 (0.118) 5.5 (0.217) 460-750 0 2.0 (0.079) 0 2.0 (0.079) 0 2.0 (0.079) 0 2.0 (0.079) A Straight Lead A Crimped Lead e1 Tape & Reel and In-Line Lead 115-420 0 2.0 (0.079) 0 2.0 (0.079) 0 2.0 (0.079) 0 2.0 (0.079) 460-550* 0 2.0 (0.079) 0 2.0 (0.079) 0 2.0 (0.079) 0 2.0 (0.079) e2 ALL n/a n/a n/a n/a 4.0 (0.157) 6.0 (0.236) 4.0 (0.157) 6.0 (0.236) e3 ALL n/a n/a n/a n/a 0 2.0 (0.079) 0 2.0 (0.079) E L L3 Dia b Dia c Outside Lead Only 115-175 -- 9.0 (0.354) -- 9.0 (0.354) -- 9.0 (0.354) -- 9.0 (0.354) 200-275 -- 9.5 (0.374) -- 9.5 (0.374) -- 9.5 (0.374) -- 9.5 (0.374) 300-460 -- 11.0 (0.433) -- 11.0 (0.433) -- 11.0 (0.433) -- 11.0 (0.433) 510-575 -- 12.0 (0.472) -- 12.0 (0.472) -- 12.0 (0.472) -- 12.0 (0.472) 625-750 -- 13.0 (0.512) -- 13.0 (0.512) -- 13.0 (0.512) -- 13.0 (0.512) ALL 25.4 (1.00) -- 25.4 (1.00) -- 25.4 (1.00) -- 25.4 (1.00) -- ALL n/a n/a n/a n/a 6.0 (0.236) -- 6.0 (0.236) -- 115-420 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 460-750 0.76 (0.030) 0.86 (0.034) 0.95 (0.037) 1.05 (0.041) 0.76 (0.030) 0.86 (0.034) 0.95 (0.037) 1.05 (0.041) ALL n/a n/a n/a n/a 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) NOTES: * Tape and Reel packaging option is available only for devices up to 420Vrms. (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series Tape and Reel Specification TMOV(R) VARISTOR WITH OUTER CRIMP iTMOV(R) VARISTOR WITH INNER CRIMP P P2 P E P P P2 E P P H H H H B1 B1 C SEATING PLANE H1 W0 W2 W1 H0 C SEATING PLANE H1 W0 W2 W1 H0 Ob Ob W W OD0 OD0 P1 P1 t F P0 TMOV(R) VARISTOR WITH STRAIGHT LEADS iTMOV(R) VARISTOR WITH STRAIGHT LEADS P P2 P E P P t F P0 P2 E P P H H H H H1 H1 Ob L W0 W2 W1 H W0 W2 W1 H Ob L W W OD0 OD0 P1 F P0 P1 t DESCRIPTION F P0 CRIMPED LEADS MODEL SIZE 14mm 20mm 22.5 Max 31 Max t STRAIGHT LEADS MODEL SIZE 14mm 20mm 22.0 Max 28.0 Max B1 Component Top to Seating Plane P Pitch of Component P0 Feed Hole Pitch 12.7 +/- 0.2 12.7 +/- 0.2 12.7 0.2 12.7 0.2 P1 Feed Hole Center to Pitch 8.95 +/- 0.7 8.95 +/- 0.7 8.95 0.7 8.95 0.7 P2 Hole Center to Component Center 12.7 +/- 0.7 12.7 +/- 0.7 12.7 0.7 12.7 0.7 F Lead to Lead Distance 7.5 +/- 0.8 7.5 +/- 0.8 7.5 0.8 7.5 0.8 h Component Alignment 2.0 Max 2.0 Max 2.0 Max 2.0 Max 18.0 +1.0/-0.5 18.0 +1.0/-0.5 18.0 +1.0/-0.5 18.0 +1.0/-0.5 12.0 +/- 0.3 12.0 +/- 0.3 12.0 0.3 12.0 0.3 W Tape Width W0 Hold Down Tape Width W1 Hole Position W2 Hold Down Tape Position H Height from Tape Centre to Component Base (non-crimped parts) H0 Seating Plane Height (crimped parts only) H1 Component Height 25.4 +/- 1.0 25.4 +/- 1.0 9.0 +0.75/-0.50 9.0 +0.75/-0.50 25.4 1.0 25.4 1.0 9.0 +0.75/-0.5 9.0 +0.75/-0.5 0.5 Max 0.5 Max 0.5 Max 0.5 Max -- -- 18.0 +2.0/-0 18.0 +2.0/-0 16.0 +/- 0.5 16.0 +/- 0.5 -- -- 40.0 Max 46.5 Max 40.0 Max 46.5 Max C Crimp Length (crimped parts only) 2.6 typ 2.6 typ -- -- D0 Feed Hole Diameter 4.0 +/- 0.2 4.0 +/- 0.2 4.0 0.2 4.0 0.2 t Total Tape Thickness 0.7 +/- 0.2 0.7 +/- 0.2 0.7 0.2 0.7 0.2 L Length of Clipped Lead 11.0 Max 11.0 Max 11.0 Max 11.0 Max p Component Alignment 3 Max. 1.00mm 3 Max 3 deg Max, 1.0mm Max 3 deg Max, 1.0mm Max NOTES: * Dimensions in mm * Reel capacity varies with voltage. * Leads are crimped and in-line. This excludes the monitor lead on iTMOV(R) varistor which are not crimped and not in-line. * To order tape and reel option please add suffix 'L2T7' to end of standard part number. * Tape and reel option is available for rated voltages up to 420V. Contact factory regarding availability of higher voltages. * Contact Littelfuse for additional details. (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV(R) and iTMOV(R) Varistor Series Part Numbering System Base Part Codes Option Codes1 (See ratings & specifications tables and notes below) TMOV 20 R P (See below) 150 E XXXXX DEVICE FAMILY Littelfuse Thermally Protected MOV NON-STANDARD LEAD FORM, PACKAGING and LEAD SPACING OPTIONS1: DISC DIAMETER (mm) 14 or 20mm L2B7: Lead Form: Crimped and In-Line2 Leads Packaging: Bulk Pack Lead Spacing3: 7.5mm CERAMIC SHAPE R: Round LEAD-FREE/RoHS COMPLIANT INDICATOR VM(AC)RMS 115V to 750V SERIES DESIGNATOR E: TMOV (2-Leaded, without indicator lead) M: iTMOV (3-Leaded, with indicator lead option) NOTES: 1 Use Base Part Code only to receive standard product: Lead Form: Straight Leads. Devices greater than 420Vrms are provided In-Line2. Packaging: Bulk Pack Lead Spacing: 7.5mm +/-1.0mm L2T7: Lead Form: Crimped and In-Line2 Leads Packaging: Tape and Reel4 Lead Spacing3: 7.5mm L3T7: Lead Form: Straight Leads and In-Line2 Leads Packing: Tape and Reel Lead Spacing: 7.5mm Option Codes: X2855: Nickel Barrier coated wire option -All standard parts use tinned copper clad steel wire. Nickel Barrier coated wire is available as an option, consisting of Copper wire with a flashing of Nickel followed by a top coating of Tin. To order append standard model BASE PART number with "X2855." Example: Standard Model Order As TMOV20RP115E TMOV20RP115EX2855 Other non-standard options may be available - please contact Littelfuse. 2 "In-Line" refers to straight row of leads at the tip where product is to contact the circuit board. Refer to "e1" in Device Dimensions section. 3 Lead Spacing refers to span between leads as "e" dimension in Device Dimensions section. 4 Due to device bulk, tape and reel packaging option is available only for devices up to 420Vrms. Pack Quantities Pack Quantities Rated Voltage 115-250 Bulk Pack Tape and Reel Model Size Model Size 14mm 20mm 14mm 20mm 600 400 500 400 275-550 500 300 400 300 575-750 400 200 n/a n/a NOTE: Tape and Reel available up to 420V only - please contact factory regarding availability of higher voltage parts. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17