Prototyping Products 8 FoF EN TN ft OPE SINGLE SIDED PIN (TYPE 10) For use with plain or copper-ciad boards. These pins have the facility for soldering discrete components on ane side and wire wrapping on the other. BE OW Ne he NS OO Nr be a ee hee aw i |] WIRE WRAP PINS Machine socketed triple height pressfit wire wrap pins with gold plated beryllium contacts. Typical insertion force 1,8N, withdrawal force 0.9N using a 0,43mm dia. polished stee! gauge. Recommended for drilled and PTH holes. e C7 ur US SHOULDER TERMINAL PIN (TYPE 3) Similar to 18-0222D but manufacturag phosphor bronze to BS 2873 PB 102, tin finish copper flash. {Tom Over TT ' 0,95 Type3 Material: Manufactured from phosphor bronze to BS 2870 PB 102 with tin finish over copper flash. Post size: 0,68 mm x 0,64 mm, diagonal 0,94 mm SINGLE SIDED PIN Ordering information Type Compatible hole dia. | Order code pierced drilled 10 1,00 1,05 18-0226F Supplied in packets of 500 DOUBLE SIDED PIN (TYPE 11) For use when wire wrapping is required both sides of board. _ Tt oho | 3 2055 | 2.36 Type 11 DOUBLE SIDED PIN Ordering information tible hole dia. Type - Compatible ole dla Order code pierced drilled 11 1,00 1,05 18-1657B Supplied in packets of 500 TEST POINT PINS (TYPE 12) These pins feature a turreted lug on the component side, guaranteeing a firm connection using a clip- on style test probe. 1,83 a Se y Type 12 TEST POINT PINS Ordering information Type Compatible hole dia. Order code pierced drilled 12 1,32 1,40 66-3532J Supplied in packets of 100 WIRE WRAP PINS Ordering information SHOULDER TERMINAL PIN = Ordering information Pack size Order cade Type Hole dia. Order code 100 68-42417H 3 1,00 18-0218B Supplied in packets of 1000 SOLDER TERMINAL PINS SHOULDER HALF PIN (TYPE 1) Designed for take-off points of PCBs where there is insufficient track space for more than 0,64 mm holes. 0,60 1,14 ie F 45 Type 1 SHOULDER HALF PIN Ordering information Type Hole dia. Order code 1 0,64 18-0221J Supplied in packets of 1000 SHOULDER TERMINAL PIN (TYPE 2) By inserting pin up to its shoulder these pins stand at a fixed height above the board surface. The separated profile offers good mechanical retention while electrical contact is made by soldering shoulder to copper track. Available in two sizes for hole size 1,02 and 1,32 mm. HALF PIN (TYPE 4) These pins are ideally suited to take off points o flying leads from a PCB. The shoulder is soldered to the copper track with the pin protruding on the component side of the board. Two sizes are available for 1,02 and 1,32 mm diameter holes. t LS 5 281 727 i 47, Hi) | 1,21/0,93 Type 4 HALF PIN Ordering information Type Hole dia. Dim.A Order code 4 1,32 1,21 18-0217G 1,00 0,93 18-0223K Supplied in packets of 1000 SHOULDERED HALF PIN (TYPE 5) The pin is similar to the other shouldered pins except that it is soldered to the wiring side of the board, where the main body of the pin protrudes. The top of the pin is flush with the component side of the board, allowing 1Cs or sockets to be mounted over it. Supplied in packets of 1000 2,01 q 5,66 * ~ L T 5 : SHOULDER TERMINAL PIN Ordering information 1,095 ype z a Hole Dimensions Order . SHOULDER TERMINAL PIN Ordering information da. | A |B | c flo le | code L raering | nent 1,00 | 97 | 56 | 1,14 ]1,0 10,4 | 18-0222D Type Hole dia. Order code 132 }11,9 | 67 | 14 |1,2 |0,5 | 18-0219H 5 1,00 18-3994L__ Supplied in packets of 1000 f _-_ - -