5 x 18 = 90 tray packaging packaging unit 48 pcs 18 6,3 3,2 2,7 14,8 5,8 max. 138 +0,3 Verpackt in Tray Verpackungseinheit 48 St. Variante 1 version 1 0,6 Leiterplatte powerless assembly pcb +0,2 31 -0,4 Ansaughaube nur bei Version 1 hood only on version 1 16 36 Pin 1 Bestuckung kraftlos 7 x 36 = 252 max. 325 Sonstige Angaben siehe Zeichnung 204628 / Additional indications according to drawing 204628 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 75 Stuck - Packaging unit: 75 pcs Abspulrichtung - Reel 24 Variante 2 21,2 Pin 1 Bestuckung mit Kraft assembly with force 56 13,8 version 2 12,6 0,3 off Direction 25 0,1 150 56,5 330 Mutter / nut Bolzen / bolt thread depth max. 3,7 mm thread depth max. 5,5 mm max. Einschraubtiefe 3,7 mm max. Einschraubtiefe 5,5 mm 3,7 Gewinde / thread M3 / #4-40 Layoutvorschlag: recommended layout: Gewinde / thread M3 / #4-40 +0,09 1 -0,06 2,74 Pin 1 B 0,05 (9x) 3,2 0,1 6,4 0,05 4 x 2,74 = 10,96 A 2,84 ohne / without 1,37 B 2,74 3 x 2,74 = 8,22 25 0,05 Beschriftung nach Bedruckungsvorschrift 174538 Part marking according to specification 174538 terminal area tin plating Anforderungsstufe: 2 class: 2 X #4-40 M3 204900 204905 204910 204899 204904 204909 Ident-Nr. Ident.-Nr. Ident.-Nr. Variante 1 Variante 1 Variante 2 part-no. tape &reel version 1 part-no. tray version 1 part-no. tray version 2 #4-40 M3 ohne without Mutter thread Bolzen Bemerkung bolt remark Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Anschlussbereich verzinnt A Fehlende Masse und Angaben siehe DIN 41652 / Missing information and dimensions according to DIN 41652 Sonstige Angaben siehe Fertigungsunterlagen / Additional indications according to the production documentation M 1:1 204898 204903 204908 204902 204907 204912 204901 204906 204911 0,05 Sonstige Angaben siehe Zeichnung 204625 / Additional indications according to drawing 204625 Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. TMC-P 09-THR-2,7-6,3-BA8 TMC-P 09-THR-2,7-6,3-type 8 144974 www.ERNI.com D 26.11.2009 Index Date Class TMCP I A3