H11L1M, H11L2M, H11L3M 6-Pin DIP Optocoupler Features Description High data rate, 1MHz typical (NRZ) The H11LXM series has a high speed integrated circuit detector optically coupled to a gallium-arsenide infrared emitting diode. The output incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse shaping. The detector circuit is optimized for simplicity of operation and utilizes an open collector output for maximum application flexibility. Free from latch up and oscilliation throughout voltage and temperature ranges. Microprocessor compatible drive Logic compatible output sinks 16mA at 0.4V maximum Guaranteed on/off threshold hysteresis Wide supply voltage capability, compatible with all popular logic systems Underwriters Laboratory (UL) recognized-- file #E90700, Volume 2 VDE recognized - File#102497 - Add option V (e.g., H11LIVM) Applications Logic to logic isolator Programmable current level sensor Line receiver--eliminate noise and transient problems A.C. to TTL conversion--square wave shaping Digital programming of power supplies Interfaces computers with peripherals Schematic ANODE 1 CATHODE 2 Package Outlines 6 VCC 5 GND Truth Table 3 (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 4 VO Input Output H L L H www.fairchildsemi.com H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler September 2009 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameters Value Units TOTAL DEVICE TSTG Storage Temperature -40 to +150 C TOPR Operating Temperature -40 to +85 C TSOL Lead Solder Temperature PD Total Device Power Dissipation @ 25C Derate Above 25C 260 for 10 sec C 250 mW 2.94 mW/C EMITTER IF Continuous Forward Current 60 mA VR Reverse Voltage 6 V Forward Current - Peak (1s pulse, 300pps) 3.0 A LED Power Dissipation 25C Ambient 120 mW 1.41 mW/C 150 mW 2.0 mW/C IF(pk) PD Derate Linearly From 25C DETECTOR PD Detector Power Dissipation @ 25C Derate Linearly from 25C VO V45 Allowed Range 0 to 16 V VCC V65 Allowed Range 3 to 16 V 50 mA IO I4 Output Current (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 2 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Absolute Maximum Ratings (TA = 25C unless otherwise specified.) Individual Component Characteristics Symbol Parameters Test Conditions Device Min. Typ. Max. Units 1.2 1.5 V EMITTER VF Input Forward Voltage IF = 10mA All IF = 0.3mA 0.75 1.0 IR Reverse Current VR = 3V All 10 A CJ Capacitance V = 0, f = 1.0MHz All 100 pF 15 V 5.0 mA 100 A DETECTOR VCC ICC(off) IOH Operating Voltage Range All Supply Current IF = 0, VCC = 5V All Output Current, High IF = 0, VCC = VO = 15V All Test Conditions Device 3 1.6 Transfer Characteristics Symbol Parameter Min. Typ. Max. Units DC CHARACTERISTICS ICC(on) Supply Current IF = 10mA, VCC = 5V All 1.6 5.0 mA VOL Output Voltage, low RL= 270,VCC = 5V, IF = IF(on) max. All 0.2 0.4 V IF(on) Turn-On Threshold Current(1) RL = 270, VCC = 5V H11L1M 1.6 mA H11L2M 10.0 H11L3M 5.0 IF(off) RL = 270, VCC = 5V All 0.3 1.0 RL = 270, VCC = 5V All 0.50 0.75 0.90 Turn-On time RL = 270, VCC = 5V, IF = IF(on), TA = 25C All 1.0 4 Fall Time RL = 270, VCC = 5V, IF = IF(on), TA= 25C All 0.1 Turn-Off Time RL= 270, VCC = 5V, IF = IF(on), TA= 25C All 1.2 Rise time RL = 270, VCC = 5V, IF = IF(on), TA = 25C All 0.1 s All 1.0 MHz Turn-Off Threshold Current IF(off)/IF(on) Hysteresis Ratio mA AC CHARACTERISTICS, Switching Speed ton tf toff tr Data Rate s s 4 s Isolation Characteristics Symbol Parameter Test Conditions VISO Input-Output Isolation Voltage t =1 sec. CISO Isolation Capacitance VI-O = 0V, f = 1MHz RISO Isolation Resistance Min. Typ. Max. 7500 VI-O = 500 VDC VPEAK 0.4 1011 Units 0.6 pF Note: 1. Maximum IF(ON) is the maximum current required to trigger the output. For example, a 1.6mA maximum trigger current would require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA. (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 3 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Electrical Characteristics (TA = 25C Unless otherwise specified.) As per IEC 60747-5-2, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For Rated Main Voltage < 150Vrms I-IV For Rated Main voltage < 300Vrms I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 VPR Input to Output Test Voltage, Method b, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5pC 1594 Vpeak Input to Output Test Voltage, Method a, VIORM x 1.5 = VPR, Type and Sample Test with tm = 60 sec, Partial Discharge < 5pC 1275 Vpeak VIORM Max. Working Insulation Voltage 850 Vpeak VIOTM Highest Allowable Over Voltage 6000 Vpeak External Creepage 7 mm External Clearance 7 mm Insulation Thickness 0.5 mm Insulation Resistance at Ts, VIO = 500V 109 RIO (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 4 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Safety and Insulation Ratings Figure 1. Transfer Characteristics Figure 2. Threshold Current vs. Supply Voltage VCC = 5V RL = 270 TA = 25C V OH 5 O V - OUTPUT VOLTAGE (V) IF - THRESHOLD CURRENT (NORMALIZED) 6 4 I F(OFF) I F(ON) 3 2 1 V OL 0 0 1 2 1.6 IF NORMALIZED TO: IF(ON) AT VCC = 5V 1.4 TA = 25oC 1.2 TURN ON THRESHOLD 1.0 TURN OFF THRESHOLD 0.8 0.6 0.4 0 3 2 Figure 3. Threshold Current vs. Supply Temperature 8 10 12 14 16 Figure 4. Output Voltage, Low vs. Load Current 1.6 2 VOL - OUTPUT VOLTAGE, LOW (V) IF(On) , IF(Off) - THRESHOLD CURRENT (NORMALIZED) 6 VCC - SUPPLY VOLTAGE (V) IF - INPUT CURRENT (mA) 1.4 1.2 1.0 0.8 NORMALIZED TO: VCC = 5V TA = 25oC 0.6 0.4 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 IF = I F(ON) V CC = 5V R L = 270 0.2 -50 -25 0 25 50 75 0.1 100 1 TA - TEMPERATURE ( oC) 10 100 IO - LOAD CURRENT (mA) Figure 5. Supply Current vs. Supply Voltage Figure 6. LED Forward Voltage vs. Forward Current 1.7 6 VF - FORWARD VOLTAGE (V) TA = 0 C 5 I C - SUPPLY CURRENT (mA) 4 I F = 5mA 25 C 70 C 4 3 2 TA = 0C 25 C 70 C 1 1.6 1.5 1.4 TA = 55C 1.3 TA = 25C 1.2 TA = 100C IF = 0mA 1.1 0 0 2 4 6 8 10 12 14 16 1.0 VCC - SUPPLY VOLTAGE (V) (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 1 10 100 IF - LED FORWARD CURRENT (mA) www.fairchildsemi.com 5 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Typical Performance Curves C I6 RE VIN 5V 5V IF 50% 0 1 H11L1 6 RL 270 4 VIN VO toff ton tr = tf = 0.01s Z = 50 2 5 10% VO 90% tf tr Figure 7. Switching Test Circuit and Waveforms (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 6 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Typical Performance Curves (Continued) Through Hole 0.4" Lead Spacing 8.13-8.89 6 4 8.13-8.89 6 4 1 3 6.10-6.60 6.10-6.60 Pin 1 1 3 Pin 1 5.08 (Max.) 0.25-0.36 7.62 (Typ.) 3.28-3.53 5.08 (Max.) 0.25-0.36 3.28-3.53 0.38 (Min.) 2.54-3.81 0.38 (Min.) 2.54-3.81 0.20-0.30 2.54 (Bsc) (0.86) 15 (Typ.) 2.54 (Bsc) (0.86) 0.41-0.51 1.02-1.78 0.20-0.30 0.41-0.51 0.76-1.14 10.16-10.80 1.02-1.78 0.76-1.14 Surface Mount (1.78) 8.13-8.89 6 4 (1.52) (2.54) (7.49) 6.10-6.60 8.43-9.90 (10.54) 1 3 (0.76) Pin 1 Rcommended Pad Layout 0.25-0.36 3.28-3.53 5.08 (Max.) 0.38 (Min.) 0.20-0.30 2.54 (Bsc) (0.86) 0.16-0.88 (8.13) 0.41-0.51 1.02-1.78 0.76-1.14 Note: All dimensions in mm. (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 7 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Package Dimensions Option Order Entry Identifier (Example) No option H11L1M S H11L1SM SR2 H11L1SR2M T H11L1TM 0.4" Lead Spacing V H11L1VM VDE 0884 TV H11L1TVM VDE 0884, 0.4" Lead Spacing SV H11L1SVM VDE 0884, Surface Mount SR2V H11L1SR2VM Description Standard Through Hole Device Surface Mount Lead Bend Surface Mount; Tape and Reel VDE 0884, Surface Mount, Tape and Reel Marking Information 1 V 3 H11L1 2 X YY Q 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `3' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code *Note - Parts that do not have the `V' option (see definition 3 above) that are marked with date code `325' or earlier are marked in portrait format. (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 8 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Ordering Information 12.0 0.1 4.5 0.20 2.0 0.05 O1.5 MIN 4.0 0.1 0.30 0.05 1.75 0.10 11.5 1.0 21.0 0.1 9.1 0.20 O1.5 0.1/-0 10.1 0.20 0.1 MAX 24.0 0.3 User Direction of Feed Note: All dimensions are in millimeters. Reflow Profile 300 260C 280 260 >245C = 42 Sec 240 220 200 180 C Time above 183C = 90 Sec 160 140 120 1.822C/Sec Ramp up rate 100 80 60 40 33 Sec 20 0 0 60 120 180 270 360 Time (s) (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 9 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler Tape Dimensions Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM* (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) (R) OPTOPLANAR (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 (c)2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.3 www.fairchildsemi.com 10 H11L1M, H11L2M, H11L3M -- 6-Pin DIP Optocoupler TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.