H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3
September 2009
H11L1M, H11L2M, H11L3M
6-Pin DIP Optocoupler
Features
■
High data rate, 1MHz typical (NRZ)
■
Free from latch up and oscilliation throughout voltage
and temperature ranges.
■
Microprocessor compatible drive
■
Logic compatible output sinks 16mA at 0.4V
maximum
■
Guaranteed on/off threshold hysteresis
■
Wide supply voltage capability, compatible with all
popular logic systems
■
Underwriters Laboratory (UL) recognized—
file #E90700, Volume 2
■
VDE recognized – File#102497 – Add option V
(e.g., H11LIVM)
Applications
■
Logic to logic isolator
■
Programmable current level sensor
■
Line receiver—eliminate noise and transient problems
■
A.C. to TTL conversion—square wave shaping
■
Digital programming of power supplies
■
Interfaces computers with peripherals
Description
The H11LXM series has a high speed integrated circuit
detector optically coupled to a gallium-arsenide infrared
emitting diode. The output incorporates a Schmitt
trigger, which provides hysteresis for noise immunity and
pulse shaping. The detector circuit is optimized for
simplicity of operation and utilizes an open collector
output for maximum application flexibility.
Schematic Package Outlines
1
2
6
5 GND
4VO
VCC
ANODE
CATHODE
3
Truth Table
Input Output
HL
LH
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 2
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified.)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol Parameters Value Units
TOTAL DEVICE
T
STG
Storage Temperature -40 to +150 °C
T
OPR
Operating Temperature -40 to +85 °C
T
SOL
Lead Solder Temperature 260 for 10 sec °C
P
D
Total Device Power Dissipation @ 25°C 250 mW
Derate Above 25°C 2.94 mW/°C
EMITTER
I
F
Continuous Forward Current 60 mA
V
R
Reverse Voltage 6 V
I
F
(pk) Forward Current – Peak (1µs pulse, 300pps) 3.0 A
P
D
LED Power Dissipation 25°C Ambient 120 mW
Derate Linearly From 25°C 1.41 mW/°C
DETECTOR
P
D
Detector Power Dissipation @ 25°C 150 mW
Derate Linearly from 25°C 2.0 mW/°C
V
O
V
45
Allowed Range 0 to 16 V
V
CC
V
65
Allowed Range 3 to 16 V
I
O
I
4
Output Current 50 mA
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 3
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
Electrical Characteristics
(T
A
= 25°C Unless otherwise specified.)
Individual Component Characteristics
Transfer Characteristics
Isolation Characteristics
Note:
1. Maximum I
F(ON)
is the maximum current required to trigger the output. For example, a 1.6mA maximum trigger current would
require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is
recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA.
Symbol
Parameters
Test Conditions Device Min. Typ. Max. Units
EMITTER
V
F
Input Forward Voltage I
F
= 10mA All 1.2 1.5 V
I
F
= 0.3mA 0.75 1.0
I
R
Reverse Current V
R
= 3V All 10 µA
C
J
Capacitance V = 0, f = 1.0MHz All 100 pF
DETECTOR
V
CC
Operating Voltage Range All 3 15 V
I
CC(off)
Supply Current I
F
= 0, V
CC
= 5V All 1.6 5.0 mA
I
OH
Output Current, High I
F
= 0, V
CC
= V
O
= 15V All 100 µA
Symbol
Parameter
Test Conditions Device Min. Typ. Max. Units
DC CHARACTERISTICS
I
CC(on)
Supply Current I
F
= 10mA, V
CC
= 5V All 1.6 5.0 mA
V
OL
Output Voltage, low R
L
= 270
Ω
,V
CC
= 5V,
I
F
= I
F(on)
max.
All 0.2 0.4 V
I
F(on)
Tu r n-On Threshold Current
(1)
R
L
= 270
Ω
, V
CC
= 5V H11L1M 1.6 mA
H11L2M 10.0
H11L3M 5.0
I
F(off)
Tu r n-Off Threshold Current R
L
= 270
Ω
, V
CC
= 5V All 0.3 1.0 mA
I
F(off)
/I
F(on)
Hysteresis Ratio R
L
= 270
Ω
, V
CC
= 5V All 0.50 0.75 0.90
AC CHARACTERISTICS, Switching Speed
t
on
Tu r n-On time R
L
= 270
Ω
, V
CC
= 5V,
I
F
= I
F(on)
, T
A
= 25°C
All 1.0 4 µs
t
f
Fall Time R
L
= 270
Ω
, V
CC
= 5V,
I
F
= I
F(on)
, T
A
= 25°C
All 0.1 µs
t
off
Tu r n-Off Time R
L
= 270
Ω
, V
CC
= 5V,
I
F
= I
F(on)
, T
A
= 25°C
All 1.2 4 µs
t
r
Rise time R
L
= 270
Ω
, V
CC
= 5V,
I
F
= I
F(on)
, T
A
= 25°C
All 0.1 µs
Data Rate All 1.0 MHz
Symbol
Parameter
Test Conditions Min. Typ. Max. Units
V
ISO
Input-Output Isolation Voltage t =1 sec. 7500 V
PEAK
C
ISO
Isolation Capacitance V
I-O
= 0V, f = 1MHz 0.4 0.6 pF
R
ISO
Isolation Resistance V
I-O
= ±500 VDC 10
11
Ω
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 4
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
Safety and Insulation Ratings
As per IEC 60747-5-2, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Symbol Parameter Min. Typ. Max. Unit
Installation Classifications per DIN VDE 0110/1.89
Table 1
For Rated Main Voltage < 150Vrms I-IV
For Rated Main voltage < 300Vrms I-IV
Climatic Classification 55/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
CTI Comparative Tracking Index 175
V
PR Input to Output Test Voltage, Method b,
VIORM x 1.875 = VPR, 100% Production Test
with tm = 1 sec, Partial Discharge < 5pC
1594 Vpeak
Input to Output Test Voltage, Method a,
VIORM x 1.5 = VPR, Type and Sample Test
with tm = 60 sec, Partial Discharge < 5pC
1275 Vpeak
VIORM Max. Working Insulation Voltage 850 Vpeak
VIOTM Highest Allowable Over Voltage 6000 Vpeak
External Creepage 7 mm
External Clearance 7 mm
Insulation Thickness 0.5 mm
RIO Insulation Resistance at Ts, VIO = 500V 109 Ω
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 5
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
Typical Performance Curves
Figure 2. Threshold Current vs. Supply Voltage
Figure 1. Transfer Characteristics
VCC – SUPPLY VOLTAGE (V)
0246810121416
IF – THRESHOLD CURRENT (NORMALIZED)
0.4
0.6
0.8
1.0
1.2
1.4
1.6
F NORMALIZED TO:
IF(ON) AT VCC = 5V
TA = 25oC
I
Figure 3. Threshold Current vs. Supply Temperature
TA – TEMPERATURE (oC)
-50 -25 0 25 50 75 100
IF(On) , IF(Off)
– THRESHOLD CURRENT (NORMALIZED)
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
NORMALIZED TO:
VCC = 5V
TA = 25oC
Figure 4. Output Voltage, Low vs. Load Current
IO – LOAD CURRENT (mA)
110100
V
OL
- OUTPUT VOLTAGE, LOW (V)
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
2
0.1
1
TURN ON THRESHOLD
TURN OFF THRESHOLD
IF = I F(ON)
VCC = 5V
RL = 270Ω
IF
– INPUT CURRENT (mA)
0123
V
O – OUTPUT VOLTAGE (V)
0
1
2
3
4
5
6
VOH
VOL
IF( OF F) IF(ON)
V
CC
= 5V
R
L
= 270Ω
T
A
= 25°C
Figure 5. Supply Current vs. Supply Voltage Figure 6. LED Forward Voltage vs. Forward Current
VCC
– SUPPLY VOLTAGE (V)
0246810121416
I
C
– SUPPLY CURRENT (mA)
0
1
2
3
4
5
6
IF = 5mA
TA
= 0
25
70
°C
°C
°C
IF = 0mA
TA = 0 70
25
IF – LED FORWARD CURRENT (mA)
VF – FORWARD VOLTAGE (V)
110100
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
TA = 25°C
TA = 55°C
TA = 100°C
°C°C°C
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 6
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
C
RERL
VIN 5V
VO
90%
ton
tr
tf
10%
50%
toff
IF
1
2
H11L1
VIN
tr = tf = 0.01µs
Z = 50
270Ω
I65V
VO
5
6
4
0
Figure 7. Switching Test Circuit and Waveforms
Typical Performance Curves (Continued)
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 7
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
Package Dimensions
8.13–8.89
6.10–6.60
Pin 1
64
13
0.25–0.36
5.08 (Max.)
3.28–3.53
0.38 (Min.) 2.54–3.81
2.54 (Bsc)
(0.86)
0.41–0.51
1.02–1.78
0.76–1.14
8.13–8.89
6.10–6.60
Pin 1
64
13
0.25–0.36
5.08 (Max.)
3.28–3.53
0.38 (Min.) 2.54–3.81
2.54 (Bsc)
(0.86)
0.41–0.51
1.02–1.78
0.76–1.14
7.62 (Typ.)
15° (Typ.)
0.20–0.30
0.20–0.30
10.16–10.80
Through Hole 0.4" Lead Spacing
Surface Mount
Rcommended Pad Layout
(1.78)
(2.54)
(1.52)
(7.49)
(10.54)
(0.76)
8.13–8.89
Note:
All dimensions in mm.
6.10–6.60
8.43–9.90
Pin 1
64
13
0.25–0.36
2.54 (Bsc)
(0.86)
0.41–0.51
1.02–1.78
0.76–1.14
0.38 (Min.)
3.28–3.53
5.08
(Max.) 0.20–0.30
0.16–0.88
(8.13)
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 8
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
Ordering Information
Marking Information
Option
Order Entry Identifier
(Example) Description
No option H11L1M Standard Through Hole Device
S H11L1SM Surface Mount Lead Bend
SR2 H11L1SR2M Surface Mount; Tape and Reel
T H11L1TM 0.4" Lead Spacing
V H11L1VM VDE 0884
TV H11L1TVM VDE 0884, 0.4" Lead Spacing
SV H11L1SVM VDE 0884, Surface Mount
SR2V H11L1SR2VM VDE 0884, Surface Mount, Tape and Reel
H11L1
1
2
6
43 5
*Note – Parts that do not have the ‘V’ option (see definition 3 above) that are
marked with date code ‘325’ or earlier are marked in portrait format.
Definitions
1Fairchild logo
2Device number
3VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4 One digit year code, e.g., ‘3’
5Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
V X YY
Q
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 9
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler
Tape Dimensions
Note:
All dimensions are in millimeters.
Reflow Profile
4.0 ± 0.1
Ø1.5 MIN
User Direction of Feed
2.0 ± 0.05
1.75 ± 0.10
11.5 ± 1.0
24.0 ± 0.3
12.0 ± 0.1
0.30 ± 0.05
21.0 ± 0.1
4.5 ± 0.20
0.1 MAX 10.1 ± 0.20
9.1 ± 0.20
Ø1.5 ± 0.1/-0
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
°C
Time (s)
0 60 180120 270
260°C
>245°C = 42 Sec
Time above
183°C = 90 Sec
360
1.822°C/Sec Ramp up rate
33 Sec
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
H11L1M, H11L2M, H11L3M Rev. 1.0.3 10
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,andis not
intended to be an exhaustive list of all such trademarks.
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™*
™*
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
®*
ThePower Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failedapplications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicalandproduct information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Preliminary Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40
First Production
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler