https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page1/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and
PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable
for DC applications.
Your advantages
Varistor-based device protection
Can be used without separate backup fuse thanks to integrated overcurrent protection
For 1-phase power supply units (AC/DC)
Pluggable
Optical status indicator via LED
With floating remote indication contact
Plugs can be checked with CHECKMASTER 2
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356939676
Weight per Piece (excluding packing) 100.000 g
Custom tariff number 85363030
Country of origin Germany
Technical data
Dimensions
Height 90 mm
Width 17.7 mm
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page2/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Technical data
Dimensions
Depth 74.5 mm (incl. DIN rail 7.5mm)
Horizontal pitch 1 Div.
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude ≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation) 5 % ... 95 %
Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation) 5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z)
General
EN type T3
Number of ports One
Mode of protection L-N
L-PE
N-PE
(L+) - (L-)
(L+/L-) - PE
Mounting type DIN rail: 35 mm
Color light grey RAL7035
traffic grey A RAL 7042
Housing material PA 6.6-FR 20% GF
PA 6.6-FR
Degree of pollution 2
Flammability rating according to UL 94 V-0
Type DIN rail module, two-section, divisible
Number of positions 2
Surge protection fault message Optical, remote indicator contact
Protective circuit
Nominal voltage UN24V AC(TN-S)
Nominal frequency fN50 Hz (60Hz)
Maximum continuous voltage UC34 V AC
34 VDC
Rated load current IL26 A (30°C)
Residual current IPE ≤ 5 µA
Nominal discharge current In (8/20) µs 1 kA
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page3/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Technical data
Protective circuit
Standby power consumption PC≤ 30 mVA (at UREF)
≤ 50 mVA (at UC)
Reference test voltage UREF 27 V AC
Combination wave UOC 2 kV
Voltage protection level Up (L-N) ≤ 0.25 kV
Voltage protection level Up (L-PE) ≤ 0.65 kV
Voltage protection level Up (N-PE) ≤ 0.65 kV
TOV behavior at UT (L-N) 50 V AC (5s / withstand mode)
50 V AC (120min / withstand mode)
TOV behavior at UT (L-PE) 50 V AC (5s / withstand mode)
50 V AC (120min / withstand mode)
Response time tA (L-N) ≤ 25 ns
Response time tA (L-PE) ≤ 100 ns
Response time tA (N-PE) ≤ 100 ns
Short-circuit current rating ISCCR 1.5 kA AC
1 kA DC
Max. backup fuse with branch wiring not required
Maximum backup fuse for through wiring 25 A (gG / B / C)
Indicator/remote signaling
Switching function N/C contact
Operating voltage 250 V AC
125 VDC (200 mA DC)
Operating current 3 A AC
1 A DC (30 V DC)
Connection method Screw connection
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section solid 0.2 mm² ... 4 mm²
Conductor cross section AWG 24 ... 12
Screw thread M3
Tightening torque 0.8 Nm
Stripping length 8 mm
Connection data
Connection method Screw connection
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section solid 0.2 mm² ... 4 mm²
Conductor cross section AWG 24 ... 12
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page4/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Technical data
Connection data
Screw thread M3
Tightening torque 0.8 Nm
Stripping length 8 mm
UL specifications
SPD Type 4CA
Maximum continuous operating voltage MCOV 34 V AC
34 VDC
Nominal voltage 24 VDC
Rated load current IL25 A
Mode of protection L-N
L-G
N-G
(L+) - (L-)
(L+) - G
(L-) - G
Power distribution system Single phase
Nominal frequency 50/60Hz
Measured limiting voltage MLV (L-N) 290 V
Measured limiting voltage MLV (L-G) 560 V
Measured limiting voltage MLV (N-G) 560 V
Measured limiting voltage MLV (L+) - (L-) 290 V
Measured limiting voltage MLV (L+) - G 560 V
Measured limiting voltage MLV (L-) - G 560 V
Nominal discharge current In1 kA
UL indicator/remote signaling
Tightening torque 5 lbf-in. ... 7 lbf-in.
Conductor cross section AWG 14 ... 12
UL connection data
Conductor cross section AWG 14 ... 12
Tightening torque 5 lbf-in. ... 7 lbf-in.
Standards and Regulations
Standards/specifications IEC61643-11 2011
EN61643-11 2012
Environmental Product Compliance
Lead 7439-92-1
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page5/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Technical data
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Product drawing
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page6/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Diagram
Nominal current depending on ambient temperature
Dimensional drawing
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page7/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0 27130800
eCl@ss 4.1 27130800
eCl@ss 5.0 27130800
eCl@ss 5.1 27130800
eCl@ss 6.0 27130800
eCl@ss 7.0 27130806
eCl@ss 8.0 27130806
eCl@ss 9.0 27130806
ETIM
ETIM 5.0 EC000942
ETIM 6.0 EC000942
ETIM 7.0 EC000942
UNSPSC
UNSPSC 13.2 39121620
Approvals
Approvals
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page8/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Approvals
Approvals
GL / CCA / KEMA-KEUR / IECEE CB Scheme / EAC / UL Recognized
Ex Approvals
cULus Recognized
Approval details
GL https://approvalfinder.dnvgl.com/ 14588-15 HH
CCA NTR-NL 7399
KEMA-KEUR http://www.dekra-certification.com 2173868.01
IECEE CB Scheme http://www.iecee.org/ NL-35777
EAC RU C-
DE.A*30.B01561
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330181
Accessories
Accessories
Device marking
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page9/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Accessories
Label-EML (20XE)R-0803452
Label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field
size: continuous x 20 mm
Label-EML (20XE)R YE-0803453
Label, Roll, yellow, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field
size: continuous x 20 mm
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
Marker pen
Marker pen-X-PEN 0,35-0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Spare parts
https://www.phoenixcontact.com/us/products/2905223
11/28/2019Page10/10
Type 3 surge protection device-PLT-SEC-T3-24-FM-2905223
Accessories
Type 3 surge protection plug-PLT-SEC-T3-24-P-2905232
Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 24 V nominal voltage.
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com