U74LVC1G08G-AL5-R - Unisonic Technologies Co., Ltd.

UNISONIC TECHNOLOGIES CO., LTD

U74LVC1G08 CMOS IC

www.unisonic.com.tw 1 of 5

2-INPUT AND

GATE

 DESCRIPTION

The U74LVC1G08 is a 2-input AND gate which provides the

Function Y=A*B.

This device has power-down protective circuit to prevent device

form destruction when it is powered down.

 FEATURES

* Inputs Accept Voltage up to 5.5V

* Low Power Current: ICC=10μA(Max)

*±24mA Output Drive(VCC=3.3V)

* Power Down Protection

 ORDERING INFORMATION

Ordering Number Package Packing

Lead Free Halogen Free

U74LVC1G08L-AE5-R U74LVC1G08G-AE5-R SOT-23-5 Tape Reel

U74LVC1G08L-AF5-R U74LVC1G08G-AF5-R SOT-25 Tape Reel

U74LVC1G08L-AL5-R U74LVC1G08G-AL5-R SOT-353 Tape Reel

 MARKING

U74LVC1G08 CMOS IC

UNISONIC TECHNOLOGIES CO., LTD 2 of 5

www.unisonic.com.tw QW-R502-223.E

 PIN CONFIGURATION

321

45

AB

GND

YVCC

 FUNCTION TABLE (each gate)

INPUT OUTPUT

A B Y

L L L

L H L

H L L

H H H

 LOGIC DIAGRAM (positive logic)

IEC logic symbol

U74LVC1G08 CMOS IC

UNISONIC TECHNOLOGIES CO., LTD 3 of 5

www.unisonic.com.tw QW-R502-223.E

 ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 1)

PARAMETER SYMBOL RATINGS UNIT

Supply Voltage VCC -0.5~6.5 V

Input Voltage VIN -0.5~6.5 V

Output Voltage active mode VOUT -0.5~VCC+0.5 V

power-down mode VOUT -0.5~6.5 V

Input Clamp Current (VIN<0) IIK -50 mA

Output Clamp Current (VOUT<0) IOK -50 mA

Output Current IOUT ±50 mA

VCC or GND Current ICC ±100 mA

Storage Temperature TSTG -65 ~ +150 °C

Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. Absolute maximum ratings are those values beyond which the device could be permanently damaged.

Absolute maximum ratings are stress ratings only and functional device operation is not implied.

 RECOMMENDED OPERATING CONDITIONS

PARAMETER SYMBOL MIN TYP MAX UNIT

Supply Voltage Operating VCC 1.65 5.5 V

Data retention only 1.5 V

Input Voltage VIN 0 5.5 V

Output Voltage VOUT 0 VCC V

Operating Temperature TA -40 85 °C

 STATIC CHARACTERISTIC S (TA=25℃)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT

High-Level Input Voltage VIH

VCC =1.65V~1.95V 0.65*VCC

V

VCC =2.3V~2.7V 1.7

VCC =3.0V~3.6V 2

VCC =4.5V~5.5V 0.7*VCC

Low-Level Input Voltage VIL

VCC =1.65V~1.95V

0.35*VCC

V

VCC =2.3V~2.7V 0.7

VCC =3.0V~3.6V 0.8

VCC =4.5V~5.5V

0.3*VCC

High-Level Output Voltage VOH

VCC =1.65V ~ 5.5V, IOH=-100μA VCC-0.1

V

VCC =1.65V, IOH=-4mA 1.2

VCC =2.3V, IOH=-8mA 1.9

VCC =3.0V, IOH=-16mA 2.4

VCC =3.0V, IOH=-24mA 2.3

VCC =4.5V, IOH=-32mA 3.8

Low-Level Output Voltage VOL

VCC =1.65V ~ 5.5V, IOL=100μA 0.1

V

VCC =1.65V, IOL=4mA 0.45

VCC =2.3V, IOL=8mA 0.3

VCC =3.0V, IOL=16mA 0.4

VCC =3.0V, IOL=24mA 0.55

VCC =4.5V, IOL=32mA 0.55

Input Leakage Current II

(

LEAK

)

V

CC =0V ~ 5.5V, VIN=5.5V or GND ±5 μA

Power OFF Leakage Current IOFF V

CC =0V, VIN or VOUT=5.5V ±10 μA

Quiescent Supply Current IQ VCC =1.65V~5.5V, VIN=5.5V or GND

IOUT=0 10 μA

Additional Quiescent Supply

Current ΔIQ VCC=3V~5.5V,One input at VCC-0.6V,

other inputs at VCC or GND 500 μA

Input Capacitance CIN V

CC =3.3V, VIN=VCC or GND 4 pF

U74LVC1G08 CMOS IC

UNISONIC TECHNOLOGIES CO., LTD 4 of 5

www.unisonic.com.tw QW-R502-223.E

 DYNAMIC CHARACTERISTICS (TA=25℃)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT

Propagation delay from

input (A or B) to output(Y) tPLH/tPHL

VCC=1.8V±0.15V, CL=15pF 1.5 7.2 ns

VCC=2.5V±0.2V, CL=15pF 0.7 4.4 ns

VCC=3.3V±0.3V, CL=15pF 0.8 3.6 ns

VCC=5V±0.5V, CL=15pF 0.8 3.4 ns

VCC=1.8V±0.15V, CL=30 or 50pF 2.4 8 ns

VCC=2.5V±0.2V, CL=30 or 50pF 1.1 5.5 ns

VCC=3.3V±0.3V, CL=30 or 50pF 1 4.5 ns

VCC=5V±0.5V, CL=30 or 50pF 1 4 ns

 OPERATING CHARACTERISTICS (TA=25℃)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT

Power Dissipation

Capacitance CPD

VCC=1.8V, f=10MHz 21 pF

VCC=2.5V, f=10MHz 24 pF

VCC=3.3V, f=10MHz 26 pF

VCC=5V, f=10MHz 31 pF

U74LVC1G08 CMOS IC

UNISONIC TECHNOLOGIES CO., LTD 5 of 5

www.unisonic.com.tw QW-R502-223.E

 TEST CIRCUIT AND WAVEFORMS

Note: CL includes probe and jig capacitance.

VCC V

IN t

R,/tF V

M V

LOAD C

L R

L V△

1.8V±0.15V VCC ≤2ns VCC/2 2* VCC 15pF 1MΩ 0.15V

2.5V±0.2V VCC ≤2ns VCC/2 2* VCC 15pF 1MΩ 0.15V

3.3V±0.3V 3 V ≤2.5ns 1.5V 6V 15pF 1MΩ 0.3V

5V±0.5V VCC ≤2.5ns VCC/2 2* VCC 15pF 1MΩ 0.3V

1.8V±0.15V VCC ≤2ns VCC/2 2* VCC 30pF 1KΩ 0.15V

2.5V±0.2V VCC ≤2ns VCC/2 2* VCC 30pF 500Ω 0.15V

3.3V±0.3V 3 V ≤2.5ns 1.5V 6V 50pF 500Ω 0.3V

5V±0.5V VCC ≤2.5ns VCC/2 2* VCC 50pF 500Ω 0.3V

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or

other parameters) listed in products specifications of any and all UTC products described or contained

herein. UTC products are not designed for use in life support appliances, devices or systems where

malfunction of these products can be reasonably expected to result in personal injury. Reproduction in

whole or in part is prohibited without the prior written consent of the copyright owner. The information

presented in this document does not form part of any quotation or contract, is believed to be accurate

and reliable and may be changed without notice.