NetKey (R) Category 6 Punchdown Jack Modules specifications Category 6/Class E, 8-position keystone jack module terminates unshielded twisted 4-pair, 22 - 26 AWG, 100 ohm cable. Punchdown tool properly terminates each conductor for optimum performance. Universal label is color-coded T568A and T568B wiring schemes. DATA SHEET NetKey (R) Network Components NetKey (R) Category 6 Jack Modules Module: Convenience pack of 25 modules: NK688M* NK688M*- Q NetKey Category 6 Patch Cords (R) Foot lengths: Meter lengths: technical information Category 6/Class E channel and component performance: Exceeds ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E channel requirements at swept frequencies up to 250 MHz FCC and ANSI compliance: Meets with ANSI/TIA-1096-A; contacts plated with 50 microinches of gold for superior performance IEC compliance: Meets IEC 60603-7 and IEC 60512-99-001 PoE compliance: Rated for 2500 cycles with IEEE 802.3af/802.3at and proposed 802.3bt type 3 and type 4 Safety compliance: cULus Listed; UL 1863 and CAN/CSA-C22.2 (UL File E129886) Operating temperature: -10C to 65C (14F to 149F) RoHS compliance: Compliant Exceeds ANSI/TIA-568-C.2 and ISO 11801 Category 6 component requirements at swept frequencies up to 250 MHz key features and benefits 100% performance tested Confidence that each jack module delivers the specified performance 110 style punchdown termination Utilizes industry standard termination style and includes a wire retention cap Modular Universal keystone jack modules snap in and out of all NetKey (R) Faceplates, Modular Patch Panels, and Surface Mount Boxes for fast moves, adds, and changes Individually serialized Marked with quality control number for traceability Convenience packaging (optional) 25 jacks packaged in one easy to open container, eliminating the time to open each individual package and reducing on-site waste; ideal for high volume installations applications Applications include: * Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet) * 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM * Token Ring 4/16 * Voice over internet protocol (VoIP) w w w . pa n d u it.c o m NK6PC3**Y NK6PC1M^Y NetKey (R) Modular Patch Panels 24-port, 1 RU: 48-port, 2 RU: NKPP24P NKPP48P Termination and Cable Prep Tools Punchdown tool: PDT110 Punchdown base: NKSPB JackRapid + Termination Tool: JR-PAN-2 Cable snipping tool: CWST Cable stripping tool: CJAST *To designate a color, add suffix IW (Off White), EI (Electric Ivory), IG (Int'l Gray), WH (White), BL (Black), OR (Orange), RD (Red), BU (Blue), GR (Green) or YL (Yellow). **For standard lengths other than 3 feet (5, 7,10, 14 or 20) change the length designation in part number to the desired length. For standard cable colors other than Off White, add suffix BU (Blue), GR (Green), RD (red) or YL (Yellow) before the Y at the end of the part number. For example, the part number for a blue 5 foot patch cord is NK6PC5BUY. ^For standard lengths other than 1 meter (2, 3, 4 or 5) change the length designation in part number to the desired length. For standard cable colors other than Off White, add suffix BU (Blue), GR (Green), RD (Red) or YL (Yellow) before the Y at the end of the part number. For example, the part number for a blue 5 meter patch cord is NK6PC5MBUY. Terminates the NetKey (R) Keystone Punchdown Jack Module and NetKey (R) Patch Panel. Terminates the NetKey (R) Keystone Punchdown Jack Module. Fluke JackRapid Termination Tool available through distribution. To locate the local office, visit www.flukenetworks.com/contact. +JackRapid is a trademark of Fluke Networks. NetKey (R) Category 6 Punchdown Jack Modules Test Results Test Method Measurement Typical Test Results Vibration IEC 512-6d Circuit Resistance (mOhms) < 40 Durability IEC 512-6a Mating/Un-mating IEC 512-6b Normal Mechanical Test - Shock Load (grams) IEC 512-6c Termination Cycles Contact Disturbance (microsecond) Circuit Resistance (mOhms) Mating Force (N) Un-mating Force (N) Number of Cycles IEC 352 Mating Cycles IEC 60603-7 Electrical Test Test Method Low Level Circuit Resistance Dielectric Withstand Voltage Insulation Resistance Mechanical Test Measurement Typical Test Results 1000 V, 1 minute Passed Measurement Typical Test Results Circuit Resistance (mOhms) < 40 IEC 512-3a Resistance (mOhms) IEC 512-9b Circuit Resistance (mOhms) Thermal Shock IEC 512-11d Circuit Resistance (mOhms) Flowing Mixed Gas Corrosion IEC 512-11g Humidity IEC 512-11c Climatic Sequence IEC 512-11a < 20 < 20 > 20 > 2500 Resistance (mOhms) Test Method Temperature Life <5 < 20 Number of Plug Insertions IEC 512-2a IEC 512-4a > 100 Circuit Resistance (mOhms) Circuit Resistance (mOhms) < 20 > 500 < 40 < 40 < 40 < 40 0.875 [22.23] 1.16 [29.50] 0.645 [16.38] Dimensions are in inches [Dimensions in brackets are metric] WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 (c)2016 Panduit Corp. ALL RIGHTS RESERVED. NKDS28--WW-ENG 2016-09-26