SF1188C * * * * * RF Filter for Family Radio Service Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-mount Case No Matching Required Complies with Directive 2002/95/EC (RoHS) 465.00 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Maximum DC Voltage on any Non-ground Terminal 30 VDC -40 to +85 C Storage Temperature Range in Tape and Reel Suitable for Lead-free Soldering - Maximum Soldering Profile 260 C for 30 s SM5050-8 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min Typ Max Units 465.000 Passband: MHz 1 Insertion Loss, fC 2.0 MHz IL 2.0 Amplitude Ripple, fC 2.0 MHz 1.0 4.0 dB 2.0 dBP-P Rejection Referenced to 0 dB: (fC - 100 MHz) to (fC -45 MHz) 50 1, 2 (fC + 45 MHz) to (fC +100 MHz) dB 50 TA Operating Temperature Range 1 -10 +50 Differential Input / Output Impedance Match No External L-C required for 50 match Case Style SM5050-8 5 X 5 mm Nominal Footprint Lid Symbolization (Y=year, WW=week S=shift) C 452 YWWS Electrical Connections Connection Terminals Input 2 Output 6 Case Ground 50 pin 2 pin 6 SAW Filter All others 50 TOP VIEW pins 1, 3, 4, 5, 7, 8 RF IC CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. www.RFM.com E-mail: info@rfm.com (c)2008-2010 by RF Monolithics, Inc. 3. 4. 5. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Page 1 of 4 SF1188C - 6/14/10 Response VSWR Smith Chart www.RFM.com E-mail: info@rfm.com (c)2008-2010 by RF Monolithics, Inc. Page 2 of 4 SF1188C - 6/14/10 SM5050-8 Surface-Mount 8-Terminal Ceramic Case 5.0 X 5.0 mm Nominal Footprint Case Dimensions Dimension A B C D E F G H I J K L M N O P Q L J M Min 4.80 4.80 1.30 1.98 1.07 0.50 2.39 P H mm Nom 5.00 5.00 1.50 2.08 1.17 0.64 2.54 1.27 0.76 1.55 2.79 0.76 2.36 1.55 2.79 2.79 2.79 Max 5.20 5.20 1.70 2.18 1.27 0.70 2.69 Min 0.189 0.189 0.050 0.078 0.042 0.020 0.094 Inches Nom 0.197 0.197 0.060 0.082 0.046 0.025 0.100 0.050 0.030 0.061 0.110 0.030 0.093 0.061 0.110 0.110 0.110 Max 0.205 0.205 0.067 0.086 0.050 0.028 0.106 Case Materials I Materials Q N K O Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free PCB Footprint TOP VIEW BOTTOM VIEW A E C B 8 8 1 7 D 7 1 2 6 6 2 3 5 5 3 4 G 4 F www.RFM.com E-mail: info@rfm.com (c)2008-2010 by RF Monolithics, Inc. Page 3 of 4 SF1188C - 6/14/10 "B" REF. 100 REF. Tape and Reel Specifications "B" Nominal Size Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 5.3 mm 5.3 mm 2.0 mm 8.0 mm 12.0 mm PIN #1 USER DIRECTION OF FEED www.RFM.com E-mail: info@rfm.com (c)2008-2010 by RF Monolithics, Inc. Page 4 of 4 SF1188C - 6/14/10