anor TUNNEL DIODE DETECTOR MODULES Tne. The detectors listed are standard products. There are many possible variations, which can be selected as options. Package configurations can be changed if desired. Performance characteristics may be modified to meet special requirements (e.g. the sensitivity might be moved higher or lower with a corresponding effect on VSWR). RF bypass capacitance values can be selected on some models. Contact the factory for special needs. Features: Exceptional Temperature Stability e _ Low Video Resistance (112Q typical) e Flat Output vs. Frequency Over Broadband Performance e Very Fast Pulse Response e No Bias Required e _ Flexible Design Options Applications: e Transmitter Monitoring e Missile Guidance Systems Input to Low-Noise Amplifiers Broadband Or Narrowband ECM Receivers e Power and Signal Monitors e Doppler Radar and Beacon Receivers Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators Minimum (2) Flatness Standard (5) Frequency Sensitivity vs Typical (3) Video Standard Optional Range Part (1) K Frequency TSS Typical (4) Capacitance Case Case (GHz) Number (mV/mW) (+/-dB) (dBm) VSWR (pF) Styles Styles 0.005 - 0.5 ACTM1078N 800 0.2 -50 2.0:1 1000 M12 M35 0.05 - 0.5 ACTM1155N 600 j 0.3 AQ 2.5:1 470 M35 M12 0.01 - 0.75 ACTM1080N 800 0.3 -50 2.5: 1000 M12 M35 01-1 ACTM1037N 900 0.2 -51 23:1 270 M12 M34 0.5-1.3 ACTM1089N 900 0.2 -51 2.2: 9 M12 M34,M35,M47,M51 0.01-2 ACTM1069N 400 0.3 49 1.5:1 1000 Mi2 M35 0.1-2 ACTM1071N 900 0.3 -51 2.0:1 75 M12 M35 0.5-2 ACTM1001N 900 0.25 51 1.971 75 Mi2 M34,M47 1-2 ACTM1013N 850 0.2 51 1.9:1 20 M12 M34,M35,M47,M51 0.1-4 ACTM1073N 800 0.25 -50 2.011, 15 M12 - 0.5-4 ACTM1054N 800 0.35 -51 2.0:1 39 M12 M34,M35,M47,M51 2-4 ACTM1002N 850 : 0.35 -51 2.0:1 39 M12 M34,M35,M47,M51 0.1-6 ACTM1017N. 700 0.35 -50 2.2: 75 M12 2-6 ACTM1006N 900 0.4 91 25:1 20 M12 : M51 2-8 ACTM1007N 750 0.5 -50 2.5:1 20 M12 M51 4-8 ACTM1003N sBO0 0.35 51 1.951, 20 M12 M51 8-12 ACTM1012N 650 0.4 -50 2.0:1 12 M12 M51 0.5-18 ACTM1020N 600 1.25 49 33:1 20 M12 _ 2-18 ACTM1009N 650 1.0 -50 3.0:1 20 M12 6-18 ACTM1058N 700 1.0 -49 25:1 ag M12 M51 8-18 ACTM1066N 700 0.9 -49 2.5:1 9 M12 1-20 ACTM1144N 600 1.3 49 3.0:1 20 M12 M51 NOTES 1) Standard output polarity is negative. If positive output is required, substitute P for N in part number. 2) Diode values can be changed to alter the level of sensitivity. As sensitivity is increased, VSWR will degrade. VSWR will improve as sensitivity is lowered. Flatness and TSS will also be influenced by these changes. If your applications require something special, please contact the factory. 3) Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with respect to noise. It is measured using a video amplifier with a 20MHz bandwidth and a 3dB noise figure. 4) VSWR measured at or below -20dBm input power level. 5) Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations. Contact the factory if value other than those shown are needed. 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.comAdvanced Components tne. ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -65C to +100C Storage Temp: -65C to +100C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD 202F, M213, Cond B Altitude: MIL-STD 202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD 202F, M107, Cond A Temperature Cycle: MIL-STD 202F, M105C, Cond D Maximum Input Power: +14dBm (This allows for 3dB margin from possible burnout at +17dBm) 0.120 0.080 tb 0.330 4 | _ g0.012 | : TYP. INPUT SCREENING : Standard Screening: Internal Visual per MIL-STD 883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Optional High-Rel Screening (Ref MIL-PRF 38534): Internal Visual per MIL-STD 883, Method 2017 Stabilization Bake per MIL-STD 883, Method 1008 Temperature Cycle per MIL-STD 883, Method 1010 Constant Acceleration per MIL-STD 883, Method 2001 Burn-in per MIL-STD 883, Method 1015 Leak Test per MIL-STD 883, Method 1014 0.050 (3) PLcs. 0.246 +.003 0.150 ln 0.129 4 SS i 0.058 ] TYP. CASE STYLE M12 0.280+.005 : COLORED DOT 0.079+.002 INEST @0.096+.003 THRU 0.160 it 0.080 14 {+001 0.020 MAX. ou (ORCAD (2) PLes. 0.004 x 0.020 MIN. (2) PLCS. 0.205+.003 = 0.126 +.004 0.062.002 | CASE STYLE M51 Part Number Ordering Information: 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460 0.400 MAX. 0.210 0.180 6 SQ. MAX. "] 0.015+.003 { Typ. =n } 1 CSTE 2 3 4 fo 0.080 MAX @0.500+.002 rt 0.450+.002 0.200 0.1854.015 4 _ LL 0.018+.002 (4) PLCS. RF IN 0.300+.005 0.050 MAX. VIDEO OUT 0.0314.003 on CASE STYLE M34 Example: ACTM1002NM1220 ACTM1002: Tunnel Module Detector, 2 - 4GHz N: Negative output polarity M12: Package type 8 7 6 5 NC Le lo @ Ly in External Visual per MIL-STD 883, Method 2009 IT) + a [PIN [FUNCTION [4 [we [SE Desr= ==) CASE STYLE M47 @0.360+.002 r @0.300+.002 7 0.160 0.1854.015 0.018+.002 J LL (4) PLCS. GND RF IN ey I Ss / osaasces x 0.031+.003 45+3 TYP. CASE STYLE M35 0.200+.005 TYP. NIC 20: 20pF custom video capacitance (omit for standard value) TM-0303B -0214 sales@advanced-control.com www.advanced-control.com