ALUMINUM ELECTROLYTIC CAPACITORS BT High Temperature Range, For +125C Use series Highly dependable reliability withstanding load life of 2000 to 10000 hours at +125C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). BW High Temperature BT Specifications Performance Characteristics Item Category Temperature Range - 40 to +125C (10 to 250V), - 25 to +125C (350 to 450V) Rated Voltage Range 10 to 450V Rated Capacitance Range 1 to 4700F Capacitance Tolerance 20% at 120Hz, 20C Rated Voltage (V) Leakage Current 160 to 450 10 to 100 < 1000 : I = 0.1CV+40 (A) max. (1 minute's) CV = CV > 1000 : I = 0.04CV+100 (A) max. (1 minute's) After 1 minute's application of rated voltage, leakage current Leakage current is not more than 0.03CV or 4 (A), whichever is greater. Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 100 0.08 160 to 250 350 to 450 120Hz, 20C 0.20 0.24 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio Z- 40C / Z+20C ZT / Z20 (MAX.) Stability at Low Temperature 10 3 4 16 2 4 The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for less than 50V (D = > 12.5 : 8 : 2000 hours, D = 10 : 5000 hours, D = 10000 hours), 63 to 100V (D = 8 : 2000 hours, D = > 12.5 : 5000 hours), more than 10 : 3000 hours, D = 160V (2000 hours) at 125C, the peak voltage shall not exceed the rated voltage. Endurance 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 160 to 250 350 to 450 3 6 6 - Capacitance change Within 30% of the initial capacitance value (10 to 100V) Within 20% of the initial capacitance value (160 to 450V) Dissipation Factor 300% or less than the initial specified value (10 to 100V) 200% or less than the initial specified value (160 to 450V) Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 125C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Printed with white color letter on blue sleeve. Marking Type numbering system (Example : 10V 220F) Radial Lead Type Sleeve (P.E.T) or Sleeve (polyolefin) d 1 2 3 4 5 6 7 8 9 10 11 12 UB T 1 A 2 2 1 MPD 8 D+ P 0.5 MAX. Configuration Capacitance tolerance (20%) Rated capacitance (220F) Rated voltage (10V) Pressure relief vent Series name L + 2 MAX. 15 MIN 4 MIN polyolefin sleeve product is also available upon request. (mm) D 8 10 12.5 16 18 Type Configuration Standard type D Pb-free leadwire Pb-free PET sleeve Semi-standard type Pb-free leadwire Pb-free Polyolefin sleeve 0.8 0.8 1.0 1.0 1.0 8 * 10 PD8 PD P 3.5 5.0 5.0 7.5 7.5 12.5 to 18 HD8 HD d 0.6 0.6 0.6 0.8 0.8 In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. * Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100B-1 ALUMINUM ELECTROLYTIC CAPACITORS BT series Dimensions V (Code) Item Co Cap.. (F) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 de 10 (1A) Case size D x L (mm) Item Co Cap.. (F) 4.7 10 22 33 47 100 220 330 470 Impedance Rated ripple () MAX. (mArms) 010 2R2 3R3 4R7 100 220 330 470 101 8 x 11.5 221 331 10 x 12.5 471 10 x 12.5 102 10 x 20 222 12.5 x 25 332 16 x 25 472 16 x 31.5 V(Code) de 16 (1C) 0.26 0.15 0.10 0.057 0.033 0.024 0.020 Case size D x L (mm) 63 (1J) Case size D x L (mm) 0.32 0.15 0.10 0.075 0.042 0.024 0.020 0.018 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 25 16 x 31.5 18 x 31.5 340 620 680 945 1490 2300 2710 3270 80 (1K) Impedance Rated ripple () MAX. (mArms) 4R7 100 8 x 11.5 220 330 8 x 11.5 470 10 x 12.5 101 10 x 16 221 12.5 x 20 331 12.5 x 25 471 12.5 x 31.5 Case size D x L (mm) Impedance Rated ripple () MAX. (mArms) 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 18 x 31.5 340 620 680 1100 1750 2300 2710 25 (1E) 2.00 1.50 0.59 0.41 0.16 0.12 0.097 130 150 530 690 1050 1290 1460 Case size D x L (mm) 1.50 0.80 0.80 0.39 0.18 0.16 0.11 Impedance Rated ripple () MAX. (mArms) 0.13 0.10 0.075 0.057 0.033 0.020 0.017 500 680 945 1100 1750 2710 3310 Case size D x L (mm) 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 18 x 35.5 50 (1H) Impedance Rated ripple () MAX. (mArms) 0.15 0.094 0.075 0.058 0.031 0.025 620 790 950 1330 2010 2790 Case size D x L (mm) 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 12.5 x 25 16 x 31.5 Impedance Rated ripple () MAX. (mArms) 35 50 60 85 180 250 300 440 555 930 1330 1650 2430 2.00 1.80 1.50 1.15 0.75 0.50 0.45 0.35 0.18 0.098 0.070 0.055 0.031 100 (2A) Case size D x L (mm) Impedance Rated ripple () MAX. (mArms) 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 31.5 16 x 25 35 (1V) 8 x 11.5 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 150 480 480 790 1240 1390 1500 Impedance Rated ripple () MAX. (mArms) 2.00 1.50 0.80 0.80 0.55 0.25 0.11 0.079 130 150 480 480 630 990 1500 1790 Rated ripple current (mArms) at 125C 100kHz Impedance () MAX. at 20C 100kHz Frequency coefficient of rated ripple current V Frequency 120Hz 300Hz 1kHz 10kHz or more 1000 > CV 0.50 0.64 0.83 1.00 1000 0.67 0.79 0.91 1.00 CV 10 to 100 V(Code) 160 (2C) Item Case size D x L (mm) Cap. Code 4.7 10 22 33 47 68 100 150 CV 4R7 100 220 330 470 680 101 151 200 (2D) Rated ripple (mArms) 10 x 20 10 x 25 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 115 154 187 245 329 434 Case size D x L (mm) 250 (2E) Rated ripple (mArms) 10 x 20 10 x 25 12.5 x 20 12.5 x 25 16 x 20 16 x 25 178 126 157 204 250 329 350 (2V) Case size D x L (mm) Rated ripple (mArms) 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 178 128 171 225 292 400 (2G) 450 (2W) Case size D x L (mm) Rated ripple (mArms) Case size D x L (mm) Rated ripple (mArms) 10 x 20 10 x 25 12.5 x 25 16 x 25 16 x 31.5 153 185 139 189 243 10 x 20 10 x 25 12.5 x 31.5 16 x 25 16 x 31.5 153 186 142 189 243 Case size D x L (mm) Rated ripple (mArms) 10 x 25 12.5 x 20 16 x 25 16 x 31.5 158 186 154 203 Rated ripple current (mArms) at 125C 120Hz Frequency coefficient of rated ripple current V 160 to 450 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz 100kHz or more 4.7 to 330 0.75 1.00 1.25 1.50 1.75 1.80 .47 to 150 0.80 1.00 1.15 1.30 1.40 1.50 Cap. (F) Wider range of rating. CAT.8100B-1