Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
www.conwin.com
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
www.conwin.com
Low Voltage
LVMOS
Clock Oscillator
Description:
The Connor Winfield 5xxx Series are
5.0x7.0mm Surface Mount, LVCMOS, Fixed
Frequency Crystal Controlled Oscillator (XO)
designed for applications requiring tight
frequency stability, wide temperature range and
low jitter. Operating at 1.8V, 2.5V or 2.8V supply
voltage, the 5xxx Series provides a LVCMOS
Output with a Tri-state enable / disable function.
The surface mount package is designed for
high-density mounting and is optimum for mass
production.
Operating Specifications
Parameter Minimum Nominal Maximum Units Notes
Output Frequency (Fo) 1.0 - 170 MHz
Total Frequency Tolerance (See Ordering Information for full part number)
Model 5x1x -25 - 25 ppm 1
Model 5x2x -50 - 50 ppm 1
Model 5x3x -100 - 100 ppm 1
Operating Temperature Range
Model 51xx -10 - 70 °C
Model 52xx -40 - 85 °C
Supply Voltage (Vcc)
Model 5xx1 1.710 1.8 1.890 Vdc
Model 5xx2 2.375 2.5 2.625 Vdc
Model 5xx6 2.660 2.8 2.940 Vdc
Supply Current (Icc) - 15 30 mA
Jitter:
Period Jitter - 3.0 5.0 ps RMS
Integrated Phase Jitter - 0.5 1.0 ps RMS
(BW = 12 KHz to 20 MHz)
Start-Up Time - - 10 ms
Absolute Maximum Ratings
Parameter Minimum Nominal Maximum Units Notes
Storage Temperature -55 - 125 °C
Supply Voltage (Vcc) -0.5 - 5.0 Vdc
Input Voltage -0.5 - Vcc + 0.5 Vdc
Features:
Model 5xxx - Series
5.0 x7.0mm Surface Mount Package
1.8V, 2.5V or 2.8V Operation
LVCMOS Output
Frequency Stabilities Available:
+/-25ppm, +/-50ppm or +/-100ppm
Temperature Ranges Available:
-10 to 70°C or -40 to 85°C,
Low Jitter <1.0 ps RMS
Tri-State Enable/Disable
Tape and Reel Packaging
RoHS Compliant / Lead Free
Bulletin SM138
Page 1 of 2
Revision 00
Date 12 Oct 2011
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Input Characteristics
Parameter Minimum Nominal Maximum Units Notes
Enable Input Voltage - (High) -(Vih) 70%Vcc - - Vdc 2
Disable Input Voltage - (Low) - (Vil) - - 30%Vcc Vdc 2
CW 1140
5112
156.25 MHZ
LVCMOS Output Characteristics
Parameter Minimum Nominal Maximum Units Notes
Load - 15 - pF
Voltage High (Voh) 90%Vcc - - Vdc
Low (Vol) - - 10%Vcc Vdc
Duty Cycle at 50% Level 45 50 55 %
Rise / Fall Time: 10% to 90%
1 to 10 MHz - - 10 ns
>10 to 50 MHz - - 7 ns
>50 MHz - - 5 ns
Type
LVCMOS
Low Voltage
Clock Series
5x7 mm
Temperature
Range
1 =-10 to 70°C
2 = -40 to 85°C
Frequency
Stability
1 = ±25 ppm
2 = ±50 ppm
3 = ±100 ppm
Output Frequency
Frequency Format
-xxx.xM Min
-xxx.xxxxxxM Max
*Amount of numbers
after the decimal
point. M = MHz
5 1 1 - 156.25M
Supply Voltage
1 = 1.8 Vdc
2 = 2.5 Vdc
6 = 2.8 Vdc
2
Ordering Information
Example: Part Number
5112-156.25M = 5x7mm package, LVCMOS Output,
-10 to 70, +/-25 ppm, 2.5 Vdc, E/D Pad 1, Output Frequency 156.25 MHz
Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851- 4722
Fax: 630- 851- 5040
www.conwin.com
Bulletin SM138
Page 2 of 2
Revision 00
Date 12 Oct 2011
Dimensional Tolerance: ±.02” (.508mm)
±.005” (.127mm)
Suggested Pad Layout
Output Waveform
Tape and Reel Dimensions
Environmental Characteristics
Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A.
Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
Soldering Process; RoHS compliant lead free. See soldering profile on page 2.
Pad Connections
Function: Output
Low: Disabled (High Impedance)
High or Open: Enabled
Solder Profile
120°C
150°C
180°C
260°C
0
220°C
Up to 120 s
Typical
10 s
60 to 90 s
Typical
Temperature 260°C
Meets IPC/JEDEC J-STD-020C
Enable / Disable Function
0.200
(5.08mm)
0.100
(2.54mm)
0.079
(2.0mm)
0.165
(4.2mm)
0.070
(1.78mm)
Bypass
Capacitor
0.01uF
Ground
Top
View
4
56
321
90%
50%
10%
CW 1140
5112
156.25M
.059
(1.50mm)
0.275
(7.0mm)
0.197
(5.0mm)
0.102
(2.6mm)
0.055
(1.4mm)
Dimensional Tolerance
+/-0.008 (+/-0.2mm)
POWER
SUPPLY
INPUT for E/D
OSC
.01uf
PROBE
OSCILLOSCOPE
FREQ
COUNTER
CL
12
3
4
A
V
Vcc
Package Characteristics
Package Hermetically sealed ceramic package and metal cover
Package Outline
Test Circuit
1: Enable / Disable
2: Ground
3: Output Q
4: Supply Voltage (Vcc)
Notes:
1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and
vibration and 20 years aging.
2. When the oscillator is disabled the output is at high impedance. Output is enabled with no connection on E/D pad.
