Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Surface Mount
NPCAPTM-PXGSeries
・Super low ESR, high ripple current capability
・Rated voltage range : 16 to 25Vdc, Capacitance range : 10 to 1,000μF
・Case size : φ5×4.5L toφ10×12.2L
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS2 Compliant
・Halogen Free
◆SPECIFICATIONS
Items Characteristics
Category
Temperature Range -55 to +105℃
Rated Voltage Range
16 to 25Vdc
Capacitance Tolerance
±20% (M) (at 20℃, 120Hz)
Surge Voltage Rated voltage×1.15 (at 105℃)
Leakage Current
*Note
Shall not exceed values shown in STANDARD RATINGS. (at 20℃ after 2 minutes)
Dissipation Factor
(tanδ)0.12 max. (at 20℃, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z(-25℃)/Z(+20℃)≦1.15
Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours
(E46,F45 : 3,000 hours) at 105℃.
Appearance No significant damage
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦150% of the initial specified value
ESR ≦150% of the initial specified value
Leakage current ≦The initial specified value
Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at
60℃, 90 to 95% RH for 1,000 hours (E46,F45 : 500 hours).
Appearance No significant damage
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦150% of the initial specified value
ESR ≦150% of the initial specified value
Leakage current ≦The initial specified value
Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds
through a protective resistor(R=1kΩ)and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦150% of the initial specified value
ESR ≦150% of the initial specified value
Leakage current ≦The initial specified value
Soldering Heat The following specifications shall be satisfied when the solder temperature is reduced back to 20°
C to measure dip resistance after
soldering has been performed under the recommended soldering conditions.
Appearance No significant damage
Capacitance value Within the specified tolerance range
D.F. (tanδ)≦The initial specified value
ESR ≦The initial specified value
Leakage current ≦The initial specified value (Voltage treatment)
Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
◆DIMENSIONS [mm]
0.3max.
W
P
Size Code
E46
F45
φ
D
5
6.3
L
4.5
4.4
A
5.3
6.6
B
5.3
6.6
C
5.9
7.2
W
0.5 to 0.8
0.5 to 0.8
P
1.4
1.9
●Terminal Code : A
φD
±
0.5
B
±
0.2
C
±
0.2
A
±
0.2
E61 5 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4
F61
JA0
6.3
6.3
10
10
5.8
10.0
6.6
10.3
10.3
6.6
10.3
10.3
7.2
11.0
11.0
0.5 to 0.8
0.7 to 1.1
1.9
4.5
4.5
JC0 10 12.2 10.3 10.3 11.0 0.7 to 1.1 4.5
J80 0.7 to 1.1
HA0 8 10.0 8.3
8.3
8.3 9.0 0.7 to 1.1 3.1
H80 8 7.7
7.7
8.3 9.0 0.7 to 1.1 3.1
H70 8 6.7 8.3 8.3 9.0 0.7 to 1.1 3.1
F80 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
L
±
0.3 (Note)
Note : L+0.1/-0.2 for E46 and F45
L
±
0.5 for HA0, JA0 and JC0
Downsized
PXG
PXE
◆MARKING
EX) 25V47µF
G
14A
47
25
V
CAT. No. E1001T
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
アルミ_英_02.indd 38 2019/04/02 14:38:39
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Surface Mount
NPCAPTM-PXGSeries
◆PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Taping code
Terminal code
Voltage code (ex. 16V:160, 20V:200)
Series code
Category
A P X G A R A GM
1 3 42 6 7 8 9 10 13125 18171611 1514
Capacitance code (ex. 47µF:470, 100µF:101)
Please refer to "Product code guide (conductive polymer type)"
◆STANDARD RATINGS
WV
(Vdc)
Cap
(µF)
Size
code
Leakage current
(µA max./after 2min.)
ESR
(mΩ max./20℃, 100k to 300kHz)
Rated ripple current
(mArms/105℃, 100kHz) Part No.
16
39 E46 312 50 1,860 APXG160ARA390ME46G
68 F45 544 40 2,450 APXG160ARA680MF45G
100 E61 320 27 3,000 APXG160ARA101ME61G
180 F61 576 22 3,300 APXG160ARA181MF61G
220 F80 704 22 3,300 APXG160ARA221MF80G
270 H70 864 22 3,300 APXG160ARA271MH70G
330 H70 1,050 22 3,300 APXG160ARA331MH70G
330 H80 1,050 21 3,400 APXG160ARA331MH80G
330 HA0 1,050 21 3,400 APXG160ARA331MHA0G
560 HA0 1,790 18 3,900 APXG160ARA561MHA0G
560 J80 1,790 20 3,800 APXG160ARA561MJ80G
820 JA0 2,620 16 4,200 APXG160ARA821MJA0G
820 JC0 2,620 12 5,400 APXG160ARA821MJC0G
1,000 JA0 3,200 18 4,100 APXG160ARA102MJA0G
1,000 JC0 3,200 12 5,400 APXG160ARA102MJC0G
20
27 E46 270 55 1,770 APXG200ARA270ME46G
47 E61 188 30 2,800 APXG200ARA470ME61G
47 F45 470 42 2,400 APXG200ARA470MF45G
56 E61 224 30 2,800 APXG200ARA560ME61G
120 F61 480 25 3,200 APXG200ARA121MF61G
150 F80 600 25 3,200 APXG200ARA151MF80G
180 H70 720 25 3,200 APXG200ARA181MH70G
220 H80 880 23 3,300 APXG200ARA221MH80G
220 HA0 880 23 3,400 APXG200ARA221MHA0G
390 HA0 1,560 20 3,700 APXG200ARA391MHA0G
390 J80 1,560 22 3,650 APXG200ARA391MJ80G
560 JA0 2,240 18 4,100 APXG200ARA561MJA0G
25
10 E46 125 60 1,700 APXG250ARA100ME46G
22 E61 110 40 2,450 APXG250ARA220ME61G
22 F45 275 45 2,350 APXG250ARA220MF45G
27 E61 135 40 2,450 APXG250ARA270ME61G
39 F61 195 30 2,800 APXG250ARA390MF61G
47 F61 235 30 2,800 APXG250ARA470MF61G
56 F61 280 30 2,800 APXG250ARA560MF61G
56 F80 280 28 2,800 APXG250ARA560MF80G
68 H70 340 28 3,000 APXG250ARA680MH70G
82 H80 410 26 3,100 APXG250ARA820MH80G
100 HA0 500 24 3,300 APXG250ARA101MHA0G
120 HA0 600 22 3,500 APXG250ARA121MHA0G
150 J80 750 25 3,400 APXG250ARA151MJ80G
220 JA0 1,100 20 3,800 APXG250ARA221MJA0G
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency
（Hz）120 1k 10k 50k 100k to 500k
SMD type 0.05 0.30 0.55 0.70 1.00
CAT. No. E1001T
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
アルミ_英_02.indd 39 2019/04/02 14:38:40