ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) Dual Channel Quad Channel FEATURES A 1 8 E C 2 7 C * Current transfer ratio at IF = 10 mA C 3 6 C * Isolation rated voltage 4420 VRMS A 4 5 E A 1 16 E C 2 15 C * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 C 3 14 C A 4 13 E A 5 12 E C 6 11 C C 7 10 C A 8 9 E AGENCY APPROVALS * UL1577, file no. E52744, double protection * cUL tested to CSA 22.2 bulletin 5A * CSA 93751 i179015-3 * BSI EN 60950, BSI EN 60065 V D E * DIN EN 60747-5-5 (VDE 0884-5) available with option 1 i179012-1 * FIMKO DESCRIPTION The ILD1, ILD2, ILD5, ILQ1, ILQ2 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the drive while maintaining a high degree of electrical isolation between input and output. The ILD1, ILD2, ILD5, ILQ1, ILQ2 are especially designed for driving medium-speed logic and can be used to eliminate troublesome ground loop and noise problems. Also these couplers can be used to replace relays and transformers in many digital interface applications such as CTR modulation. The ILD1, ILD2, ILD5 have two isolated channels in a single DIP package and the ILQ1, ILQ2 have four isolated channels per package. ORDERING INFORMATION I L x # - PART NUMBER X 0 # # PACKAGE OPTION DIP-# Option 6 7.62 mm 10.16 mm Option 7 Option 9 T TAPE AND REEL x = D (dual) or Q (quad) > 0.7 mm DUAL CHANNEL AGENCY CERTIFIED/PACKAGE UL, CSA, BSI, FIMKO > 0.1 mm QUAD CHANNEL CTR (%) 20 to 300 100 to 500 50 to 400 20 to 300 ILD1 ILD2 ILD5 - - - ILD2-X006 - - - SMD-8, option 7 ILD1-X007T (1) ILD2-X007T (1) - - - SMD-8, option 9 ILD1-X009T (1) ILD2-X009T (1) ILD5-X009T (1) - - DIP-16 - - - ILQ1 ILQ2 DIP-16, 400 mil, option 6 - - - ILQ1-X006 ILQ2-X006 SMD-16, option 7 - - - ILQ1-X007 ILQ2-X007T (1) SMD-16, option 9 - - - ILQ1-X009T (1) ILQ2-X009T (1) DIP-8 DIP-8, 400 mil, option 6 Rev. 1.9, 06-Feb-18 100 to 500 Document Number: 83646 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors DUAL CHANNEL AGENCY CERTIFIED/PACKAGE QUAD CHANNEL CTR (%) VDE, UL, CSA, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 DIP-8 ILD1-X001 ILD2-X001 ILD5-X001 - - - ILD2-X016 - - - SMD-8, option 7 - ILD2-X017 - - - SMD-8, option 9 ILD1-X019T - - - - DIP-16 - - - - ILQ2-X001 DIP-16, 400 mil, option 6 - - - - ILQ2-X016 SMD-16, option 7 - - - - ILQ2-X017T (1) DIP-8, 400 mil, option 6 Notes * Additional options may be possible, please contact sales office (1) Also available in tubes; do not put T on end ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Surge current IFSM 2.5 A Power dissipation Pdiss 100 mW 1.3 mW/C Derate linearly from 25 C OUTPUT Collector emitter reverse voltage Collector current t < 1 ms Power dissipation ILD1 VCEO 50 V ILQ1 VCEO 50 V ILD2 VCEO 70 V ILQ2 VCEO 70 V ILD5 VCEO 70 V IC 50 mA IC 400 mA Pdiss 200 mW 2.6 mW/C Derate lineary from 25 C COUPLER Package power dissipation Ptot Derate linearly from 25 C 250 mW 3.3 mW/C Storage temperature Tstg -40 to +150 C Operating temperature Tamb -40 to +100 C Junction temperature Tj 100 C Tsld 260 C Soldering temperature (1) 2 mm from case bottom Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for throught hole devices (DIP) Rev. 1.9, 06-Feb-18 Document Number: 83646 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Forward voltage IF = 60 mA VF - 1.25 1.65 V Reverse current VR = 6 V IR - 0.01 10 A INPUT Capacitance VR = 0 V, f = 1 MHz CO - 25 - pF TthJL - 750 - K/W VCE = 5 V, f = 1 MHz CCE - 6.8 - pF VVCE = 10 V ICEO - 5 50 nA IC = 1 mA, IB = 20 A VCESAT - 0.25 0.4 V Thermal resistance, junction to lead OUTPUT Collector emitter capacitance Collector emitter leakage current Saturation voltage, collector emitter DC forward current gain VCE = 10 V, IB = 20 A hFE 200 650 1800 DC forward current gain saturated VCE = 0.4 V, IB = 20 A hFEsat 120 400 600 Rthjl - 500 - K/W CIO - 0.8 - pF Thermal resistance, junction to lead COUPLER Capacitance (input to output) VIO = 0 V, f = 1 MHz Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION IF =10 mA, VCE = 0.4 V IC/IF (collector emitter saturated) IF =10 mA, VCE = 10 V PART SYMBOL MIN. TYP. MAX. UNIT % ILD1 CTRCEsat - 75 - ILQ1 CTRCEsat - 75 - % ILD2 CTRCEsat - 170 - % ILQ2 CTRCEsat - 170 - % ILD5 CTRCEsat - 100 - % ILD1 CTRCE 20 80 300 % ILQ1 CTRCE 20 80 300 % ILD2 CTRCE 100 200 500 % ILQ2 CTRCE 100 200 500 % ILD5 CTRCE 50 130 400 % VIOTM 450 t1, t2 t3 , t4 ttest tstres 400 Phototransistor PSO (mW) 350 300 = 1 s to 10 s =1s = 10 s = 12 s Vpd 250 VIOWM VIORM 200 IR-diode ISI (mA) 150 100 50 0 0 0 25 50 75 100 125 150 TSI - Safety Temperature (C) t3 ttest t4 175 13930 t1 tTr = 60 s t2 t stres t Fig. 1 - Derating Diagram Rev. 1.9, 06-Feb-18 Fig. 2 - Test Pulse Diagram for Sample Test according to DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5 Document Number: 83646 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Current Delay Rise time Storage Fall time Propagation H to L Propagation L to H Rev. 1.9, 06-Feb-18 VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP ILD1 IF - 20 - mA ILQ1 IF - 20 - mA ILD2 IF - 5 - mA ILQ2 IF - 5 - mA ILD5 IF - 10 - mA ILD1 tD - 0.8 - s ILQ1 tD - 0.8 - s ILD2 tD - 1.7 - s ILQ2 tD - 1.7 - s ILD5 tD - 1.7 - s ILD1 tr - 1.9 - s ILQ1 tr - 1.9 - s ILD2 tr - 2.6 - s ILQ2 tr - 2.6 - s ILD5 tr - 2.6 - s ILD1 ts - 0.2 - s ILQ1 ts - 0.2 - s ILD2 ts - 0.4 - s ILQ2 ts - 0.4 - s ILD5 ts - 0.4 - s ILD1 tf - 1.4 - s ILQ1 tf - 1.4 - s ILD2 tf - 2.2 - s ILQ2 tf - 2.2 - s ILD5 tf - 2.2 - s ILD1 tPHL - 0.7 - s ILQ1 tPHL - 0.7 - s ILD2 tPHL - 1.2 - s ILQ2 tPHL - 1.2 - s ILD5 tPHL - 1.1 - s ILD1 tPLH - 1.4 - s ILQ1 tPLH - 1.4 - s ILD2 tPLH - 2.3 - s ILQ2 tPLH - 2.3 - s ILD5 tPLH - 2.5 - s Document Number: 83646 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT SATURATED Current Delay Rise time Storage Fall time Propagation H to L Propagation L to H VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V ILD1 IF - 20 - mA ILQ1 IF - 20 - mA ILD2 IF - 5 - mA ILQ2 IF - 5 - mA ILD5 IF - 10 - mA ILD1 tD - 0.8 - s ILQ1 tD - 0.8 - s ILD2 tD - 1 - s ILQ2 tD - 1 - s ILD5 tD - 1.7 - s ILD1 tr - 1.2 - s ILQ1 tr - 1.2 - s ILD2 tr - 2 - s ILQ2 tr - 2 - s ILD5 tr - 7 - s ILD1 ts - 7.4 - s ILQ1 ts - 7.4 - s ILD2 ts - 5.4 - s ILQ2 ts - 5.4 - s ILD5 ts - 4.6 - s ILD1 tf - 7.6 - s ILQ1 tf - 7.6 - s ILD2 tf - 13.5 - s ILQ2 tf - 13.5 - s ILD5 tf - 20 - s ILD1 tPHL - 1.6 - s ILQ1 tPHL - 1.6 - s ILD2 tPHL - 5.4 - s ILQ2 tPHL - 5.4 - s ILD5 tPHL - 2.6 - s ILD1 tPLH - 8.6 - s ILQ1 tPLH - 8.6 - s ILD2 tPLH - 7.4 - s ILQ2 tPLH - 7.4 - s ILD5 tPLH - 7.2 - s COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 C, unless otherwise specified) SYMBOL MIN. TYP. MAX. UNIT Common mode rejection, output high VCM = 50 VP-P, RL = 1 k IF = 0 mA PARAMETER CMH - 5000 - V/s Common mode rejection, output low CML - 5000 - V/s CCM - 0.01 - pF Common mode coupling capacitance Rev. 1.9, 06-Feb-18 TEST CONDITION VCM = 50 VP-P, RL = 1 k IF = 10 mA Document Number: 83646 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL VALUE According to IEC 68 part 1 UNIT 40/100/21 Comparative tracking index CTI 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Output safety power PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 C 7 mm 7 mm 0.4 mm Maximum rated withstanding isolation voltage t = 1 min Isolation resistance Creepage distance Clearance distance Insulation thickness DTI Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VCC = 5 V VCC = 5 V f = 10 KHz, DF = 50 % RL I F = 10 mA VO f = 10 kHz, DF = 50 % VO IF = 10 mA RL = 75 iild1_03 iild1_01 Fig. 3 - Non-Saturated Switching Schematic Fig. 5 - Saturated Switching Schematic IF IF tD t PHL VO VO tPLH tS tR t PLH VTH = 1.5 V 50 % t PHL iild1_02 tD tR Fig. 4 - Non-Saturated Switching Timing Rev. 1.9, 06-Feb-18 tS tF tF iild1_04 Fig. 6 - Saturated Switching Timing Document Number: 83646 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors 1.5 1.3 TA = - 55 C 1.2 TA = 25 C 1.1 1.0 0.9 TA = 100 C 0.8 1 iild1_05 10 CTRce(sat) V = 0.4 V CE T = 70 C A NCTR 0.5 NCTR(SAT) 100 I F - Forward Current (mA) 0.1 iild1_08 Fig. 7 - Normalized Non-Saturated and Saturated CTR vs. LED Current 100 1.5 VCE = 10 V, IF = 10 mA, TA = 25 C NCTR - Normalized CTR Normalized to: VCE = 10 V,IF = 10 mA CTRce(sat)VCE = 0.4 V NCTR 0.5 NCTR (SAT) 0.0 0.1 1 iild1_06 10 CTRce(sat) VCE = 0.4 V 1.0 TA = 85 C NCTR 0.5 NCTR(SAT) 0.0 0.1 100 I F - LED Current (mA) 1 iild1_09 Fig. 8 - Normalized Non-Saturated and Saturated CTR vs. LED Current 10 100 IF - LED Current (mA) Fig. 11 - Normalized Non-Saturated and Saturated CTR vs. LED Current 35 1.5 Normalized to: ICE - Collector Current (mA) CTRNF - Normalized CTR Factor 10 Normalized to: TA = 25 C VCE =10V, IF = 10 mA,TA = 25 C CTRce(sat) VCE = 0.4 V 1.0 1 IF - LED Current (mA) Fig. 10 - Normalized Non-Saturated and Saturated CTR vs. LED Current 1.5 1.0 A 1.0 0.0 0.7 0.1 CTRNF - Normalized CTR Factor Normalized to: V = 10 V, I = 10 mA CE F T = 25 C CTR - Normalized CTR Factor VF - Forward Voltage (V) 1.4 TA = 50 C NCTR 0.5 NCTR (SAT) 0.0 0.1 iild1_07 25 50 C 20 15 70 C 25 C 85 C 10 5 0 1 10 0 100 I F - LED Current (mA) Fig. 9 - Normalized Non-Saturated and Saturated CTR vs. LED Current Rev. 1.9, 06-Feb-18 30 iild1_10 10 20 30 40 50 60 I - LED Current (mA) F Fig. 12 - Collector Emitter Current vs. Temperature and LED Current Document Number: 83646 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com tpLH - Propagation Low-High (s) 105 I CEO - Collector Emitter (nA) 104 103 102 Vce = 10 V 101 Typical 100 10- 1 10- 2 - 20 iild1_11 0 20 40 60 80 1000 100 2.0 1.5 tpLH 1 0.1 1 10 1.0 100 R L - Collector Load Resistor (k) iild1_12 Fig. 13 - Collector Emitter Leakage Current vs.Temperature tpHL 10 100 TA - Ambient Temperature (C) 2.5 TA = 25 C, IF = 10 mA Vcc = 5 V, Vth = 1.5 V tpHL - Propagation High-Low (s) Vishay Semiconductors Fig. 14 - Propagation Delay vs. Collector Load Resistor PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 0.165 ISO method A 9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 0.70 0.19 0.51 0.05 3.045 0.255 3 to 9 2.54 typ. 0.25 0.05 Rev. 1.9, 06-Feb-18 i178006 Document Number: 83646 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Pin one ID 8 7 6 5 4 3 2 1 6.48 6.81 9 10 11 12 13 14 15 16 ISO method A 19.77 20.07 0.76 1.14 0.79 7.62 typ. 3.30 3.81 10 typ. 4 0.51 0.89 0.46 0.56 2.54 typ. 3 to 9 1.27 i178007 2.79 3.30 0.20 0.30 Option 6 Option 7 Option 9 10.36 9.96 7.62 typ. 9.53 10.03 7.8 7.4 5.84 6.35 7.62 ref. 0.7 4.6 4.1 0.102 0.249 8 min. 0.25 typ. 0.51 1.02 0.35 0.25 8.4 min. 15 max. 8 min. 10.16 10.92 10.3 max. 0.030 (0.76) 0.100 (2.54) R 0.010 (0.25) 0.070 (1.78) 0.315 (8.00) min. 0.060 (1.52) 0.435 (11.05) 0.030 (0.76) 0.100 (2.54) R 0.010 (0.25) 0.070 (1.78) 0.315 (8.00) min. 0.060 (1.52) 0.435 (11.05) 18450-9 PACKAGE MARKING (example) ILD2 V YWW H 68 ILQ2 V YWW H 68 Notes * Only option 1 and 7 reflected in the package marking * The VDE logo is only marked on option 1 parts * Tape and reel suffix (T) is not part of the package marking Rev. 1.9, 06-Feb-18 Document Number: 83646 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: ILD1 ILD2 ILD2-X007T ILD2-X009 ILD5 ILQ1 ILQ2 ILQ2-X009 ILQ5 ILD1-X001 ILD1-X007 ILD1-X007T ILD1X009 ILD1-X009T ILD1-X019T ILD1211T ILD1213T ILD1217T ILD2-X001 ILD2-X006 ILD2-X007 ILD2-X009T ILD2-X016 ILD2-X017 ILD5-X001 ILD5-X009T ILQ1-X006 ILQ1-X007 ILQ1-X009 ILQ2-X001 ILQ2-X006 ILQ2X007 ILQ2-X007T ILQ2-X009T ILQ2-X016 ILQ2-X017 ILQ2-X017T ILQ5-X009 ILQ5-X009T ILD5-X009 ILQ1X009T ILD207-X001T