6CWQ03FNTR - International Rectifier

6.73 (0.2 6)

6.35 (0.25)

5.46 (0.21)

5.21 (0.20)

1.27 (0.0 5)

0.88 (0.03)

5.97 (0.2 3)

1 - Anode

2 - Cathode

3 - Anode

4 - Cathode

1.64 (0.0 2)

1.52 (0.06)

1.15 (0.04)

1.14 (0.04)

0.76 (0.03)

2.28 (0.09)

0.89 (0.03)

0.64 (0.02)

4.57 (0.18)

123

6.22 (0.24)

2.38 (0.09)

2.19 (0.08)

6.45 (0.2 4)

5.68 (0.22)

10.42 (0.41)

9.40 (0.37)

0.46 (0.0 2)

0.58 (0.0 2)

1.14 (0.04)

0.89 (0.0 3)

0.51 (0.0 2)

MIN.

0.58 (0.0 2)

0.46 (0.02)

MINIMUM RECOMMENDED FOO TPRINT

5.97 (0.2 4)

10.67 (0.4 2)

1.65 (0.06)

6.48 (0.26)

2.54 (0.10)

2.28 (0.0 9)

SCHOTTKY RECTIFIER 7 Amp

6CWQ03FN

www.irf.com 1

Bulletin PD-20560 rev. F 03/03

Major Ratings and Characteristics

IF(AV) Rectangular 7 A

waveform

VRRM 30 V

IFSM @ tp = 5 µs sine 535 A

VF@ 3 Apk, TJ = 125°C 0.35 V

(per leg)

TJrange - 40 to 150 °C

Characteristics 6CWQ03FN Units

Description/ Features

The 6CWQ03FN surface mount, center tap, Schottky rectifier

series has been designed for applications requiring low

forward drop and small foot prints on PC board. Typical

applications are in disk drives, switching power supplies,

converters, free-wheeling diodes, battery charging, and

reverse battery protection.

Popular D-PAK outline

Center tap configuration

Small foot print, surface mountable

Low forward voltage drop

High frequency operation

Guard ring for enhanced ruggedness and long term

reliability

D-Pak (TO-252AA)

Conform to JEDEC outline D-Pak (Similar to TO-252AA)

Dimensions in millimeters and (inches)

Anode

node

Base

Common

Cathode

Common

Cathode

6CWQ03FN

Bulletin PD-20560 rev. F 03/03

www.irf.com

VFM Max. Forward Voltage Drop 0.45 V @ 3A

(Per Leg) * See Fig. 1 (1) 0.52 V @ 6A

0.35 V @ 3A

0.46 V @ 6A

IRM Max. Reverse Leakage Current 2 mA TJ = 25 °C

(Per Leg) * See Fig. 2 (1) 50 mA T J = 125 °C

VF(TO) Threshold Voltage 0.22 V TJ = TJ max.

rtForward Slope Resistance 32.86 mΩ

CTTyp. Junction Capacitance (Per Leg) 29 0 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C

LSTypical Series Inductance (Per Leg) 5.0 nH Measured lead to lead 5mm from package body

dv/dt Max. Voltage Rate of Change 10000 V/µs (Rated VR)

TJMax. Junction Temperature Range (*) -40 to 150 °C

Tstg Max. Storage Temperature Range -40 to 150 °C

RthJC Max. Thermal Resistance(Per Leg) 4.70 °C/W DC operation * See Fig. 4

Junction to Case (Per Device) 2.35

wt Approximate Weight 0.3 (0.01) g (oz.)

Case Style D-Pak Similar to TO-252AA

Thermal-Mechanical Specifications

TJ = 25 °C

TJ = 125 °C

Electrical Specifications

(1) Pulse Width < 300µs, Duty Cycle <2%

VR = rated VR

Part number 6CWQ03FN

VRMax. DC Reverse Voltage (V)

VRWM Max. Working Peak Reverse Voltage (V)

Voltage Ratings

Parameters 6CWQ... Units Conditions

IF(AV) Max. Average Forward (Per Leg) 3.5 A 50% duty cycle @ TC = 134°C, rectangular wave form

Current * See Fig. 5 (Per Device) 7

IFSM Max. Peak One Cycle Non-Repetitive 535 5µs Sine or 3µs Rect. pulse

Surge Current (Per Leg) * See Fig. 7 90 10ms Sine or 6ms Rect. pulse

EAS Non-Repet. Avalan. Energy (Per Leg) 8 mJ TJ = 25 °C, IAS = 2 Amps, L =4 mH

IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1 µsec

(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical

Absolute Maximum Ratings

Following any rated

load condition and with

rated VRRM applied

Parameters 6CWQ... Units Conditions

< thermal runaway condition for a diode on its own heatsink

(*) dPtot 1

dTj Rth( j-a)

6CWQ03FN

Bulletin PD-20560 rev. F 03/03

www.irf.com

Fig. 2 - Typical Values Of Reverse Current

Vs. Reverse Voltage (Per Leg)

Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage (Per Leg)

Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)

Fig. 1 - Max. Forward Voltage Drop Characteristics

(Per Leg)

0.001

0.01

0.1

100

5 1015202530

125°C

100°C

75°C

50°C

25°C

Rever se Current - I (mA)

T = 150°C

Reverse Voltage - V (V)

0.1

0.00001 0.0001 0.001 0.01 0.1 1

thJC

t , Rectan gular Pu lse Du ration (Seconds)

Single Pulse

(Therm al Re sistance )

Thermal Impedance Z (° C /W)

D = 0.75

D = 0.50

D = 0.33

D = 0.25

D = 0.20

thJC C

Notes:

1. Duty factor D = t / t

2. Peak T = P x Z + T

100

0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2

In stan tan eou s Forward Curr ent - I (A)

For ward Voltage Drop - V (V)

T = 150°C

T = 125°C

T = 25° C

100

1000

0 5 10 15 20 25 30 35

Ju nction Capaci tance - C (pF)

Reverse Vol tage - V (V)

T = 2 5°C

6CWQ03FN

Bulletin PD-20560 rev. F 03/03

www.irf.com

Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)

Fig. 5 - Max. Allowable Case Temperature

Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics

(Per Leg)

(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;

Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);

PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR

100

1000

10 100 1000 10000

FSM

Non-Repetitive Surge Current - I (A)

Square Wave Pulse Duration - t (microsec)

At Any Rated Load Condi ti on

And With Rated V Applied

Following Surge

RRM

110

120

130

140

150

012345

Al lowabl e Case Temperatur e - (° C)

F(AV)

see note (2)

Aver age Forwar d Current - I (A)

Square wave (D = 0.50)

80 % Rated V applied

0.5

1.5

012345

Average Power Loss - (Watts)

F(AV)

RMS Lim it

D = 0.2 0

D = 0.2 5

D = 0.3 3

D = 0.5 0

D = 0.7 5

Aver age Forward Current - I (A)

6CWQ03FN

Bulletin PD-20560 rev. F 03/03

www.irf.com

Tape & Reel Information

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

12.1 (0.48)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

11.9 (0.47)

1.85 (0.07)

TO-252AA Tape & Reel

When ordering, indicate the part

number, part orientation, and the

quantity. Quantities are in multiples

of 2,000 pieces per reel for TR and

multiples of 3,000 pieces per reel

for both TRL and TRR.

13 (0.52) DIA.

DIA. MAX.

375 (14.17) 50 (1.97) DIA.

22.4 (0.88)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

6.8 (0.26)

7.0 (0.28)

TRR

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

8.1 (0.32)

1.85 (0.07)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

7.9 (0.31)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

10.4 (0.41)

10.6 (0.42)

DIA.

TRL

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

8.1 (0.32)

1.85 (0.07)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

7.9 (0.31)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

10.4 (0.41)

10.6 (0.42)

DIA.

Marking Information

EXAMPLE: THIS IS A 6CWQ03FN

5K3A

712A

INTERNATIONAL

RECTIFIER LOGO PART NUMBER

ASSEMBLY

LOT CODE

4 (K)

1 (A) 3 (A)

6CWQ03FN

2 (K)

DATE CODE (YWWA)

Y = YEAR

WW = WEEK

A = LINE

6CWQ03FN

Bulletin PD-20560 rev. F 03/03

www.irf.com

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 03/03

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.

Qualification Standards can be found on IR's Web site.