HECR Series Avionicap?Series HECR / Avionicap?Series Minature Metallized Polycarbonate - Hermetically Sealed For hostile environments where pcb density and system miniaturization are required. Effective replacement for conventional tubular axial leaded capacitors FEATURES For Hostile environments where pcb density and system miniaturization are required. Effective replacement for conventional tubular axial leaded capacitors SPECIFICATION SUMMARY Capacitance Range 0.001F to 1.0F Capacitance is measured at 25C and at or referred to a frequency of 1KHz. Capacitance Tolerance K=?0%, J=?0%, G=?0%, F=?0% Operating Temperature Range From -55C to 125C Enclosure/ Construction Hermetically sealed ceramic case with tinned metal end caps. Voltage Rating DC working voltage ratings at +85C, 50VDC, 100VDC, 150VDC, 200VDC and 300VDC. Voltage derating of 1.25% per degree C is necessary to +125C. Quality Control Capacitors are tested 100% for: ?Capacitance tolerance ?Dissipation Factor ?Dielectric withstanding voltage ?Insulation Resistance ?Seal per Method 112 of MIL-STD-202 HECR-test condition A M39022/11 - also tested to condition C, procedure llla. Complete process and inspection data is maintained on file and is available on special request. Environmental Parameter Vibration Immersion Shock Humidity Thermal Shock Condition Method Reference MIL-STD-202 CHARACTERISTICS Insulation Resistance Temparature(C) 25C Megaohms x 100,000 Microfarads 85C 7,000 125C 700 Insulation Resistance Capacitance Change Temparature(C) -55C Percentage Change -2.5 (typical) +25C 0 +85C ?.0 +125C ?.0 Capacitance Change Dissipation Factor When measured at 1KHz, the dissipation factor will not exceed 0.2% form +25?to 125C Dielectric Strength Capacitors will withstand a DC potential of 200% rated voltage for two (2) minutes without damage or breakdown. Test voltage is applied and discharged through a resistance of 1 OHM per volt minimum, and at 25C. Electrical Data VDC Value in MFD 50 Type - - 1 .0012 - - 1 .0015 - - 1 .0018 - - 1 .0022 - - 2 .0027 - - 2 .0033 - - 3 .0039 - - 3 .0047 - - 3 .0056 - 1 3 .0068 - 1 3 .0082 - 1 3 .010 1 2 3 .012 1 2 4 .015 1 2 4 .018 1 - 5 .022 1 - 5 .027 1 - 5 .033 2 3 6 CHR21:50VDC CHR22:100VDC CHR24:200VDC .039 2 3 6 CHR23:150VDC CHR25:300VDC .047 2 3 - .056 - 3 - .068 3 4 - .082 3 4 - .10 3 5 - .12 3 5 - .15 3 6 - 102 H Capacitance The first two digits are significant, the third represents the number of zeros to follow to express capacitance in picofarads Voltage B=50VDC D=100VDC E=150VDC F=200VDC H=300VDC K Tolerance K=10% J=5% G=2% F=1% Note: To Specify an insulated version,add the letter "S" to the end of part number, for example:HECR102HKS MIL-C-39022/11 PART NUMBER SYSTEM M39022/11 Military Specification B 333 Voltage B=50VDC D=100VDC E=150VDC F=200VDC H=300VDC Capacitance Expressed in picofarads, the first two digits are significant the third represents the number of zeros (e.g., 333 equals 33,000 pF = .033 mF F Capacitance Tolerance K=10% J=5% G=2% F=1% M Failure Rate Note: Insulated case parts should be specified as such on purchase order. MIL-C-39022/11 Styles: 150 .001 Electronic Concept, Inc. Part Number System HECR 100 Case Sizes Case No. T +.030 -.010 H +.030 -.010 L +.030 -.020 LS .015 1 .110 .210 .240 .200 2 .170 .270 .240 .200 3 .170 .270 .340 .300 4 .190 .380 .340 .300 5 .190 .380 .450 .400 6 .220 Mechanical Data .500 .450 .400 .18 4 6 - .22 4 6 - .27 4 - - .33 5 - - .39 5 - - .47 6 - - .56 6 - - .68 6 - - .82 - - - 1.00 - - - Revolutionary and safety technology How To Order TYPE HECR Metallized Polycarbonate - Hermetically Sealed CAPACITANCE IN PICOFARADS The first digits are significant, the third digit represents the number of zeros to follow to express capacitance in picofarads 102 VOLTAGE H TOLERANCE K A=30VDC, B=50VDC, D=100VDC, E=150VDC, F=200VDC, H=300VDC K=?0% J=?% G=2% F=1% Marking And DateCode All capacitors are marked with HECR part number and date code, Those supplied to MIL-C-39022/11 are marked in accordance with the military specification. The first two digits of the date code represent the year, the second two digits the week, i.e., 9452 id the 52nd week of 1994, 9502 is the 2nd week of 1995. Quality Assurance Emphasis is placed on quality assurance. The functions of raw material inspection, manufacturing process inspection and final product inspection are constantly being monitored by our Quality Control Department. Complete procedures are described in our quality control manual. E.C.I. will continue to advance the state-of-the-art by utilizing and combining leading edge technology, ultra-miniature capacitor designs and established reliability procedures. SALES OFFICES United States Europe Eastern: New Jersey 732-542-7880 Ireland Electronic Concepts LTD IDA Estate, Oughterad Co. Galway, Ireland tel: +353-91-552385,552432 fax: +353-91-552387 email: sales@ecicaps.ie website:www.electronicconcepts.ie Central: Illinois 630-668-8747 email: sales@ecicaps.com website:www.ecicaps.com P/N 161011150 Rev.8