HECRSeries
Avionicap?Series
HECR / Avionicap?Series Minature Metallized Polycarbonate - Hermetically
Sealed
For hostile environments where pcb density
and system miniaturization are required.
Effective replacement for conventional
tubular axial leaded capacitors
FEATURES
For Hostile environments where pcb
density and system miniaturization are
required.
Effective replacement for conventional
tubular axial leaded capacitors
SPECIFICATION SUMMARY
Capacitance Range
0.001µF to 1.0µF Capacitance is measured at 25°C and at or
referred to a frequency of 1KHz.
Capacitance Tolerance
K=?0%, J=?0%, G=?0%, F=?0%
Operating Temperature Range
From -55ºC to 125ºC
Enclosure/ Construction
Hermetically sealed ceramic case with tinned metal end caps.
Voltage Rating
DC working voltage ratings at +85ºC, 50VDC, 100VDC,
150VDC, 200VDC and 300VDC. Voltage derating of 1.25% per
degree C is necessary to +125°C.
Quality Control
Capacitors are tested 100% for:
?Capacitance tolerance
?Dissipation Factor
?Dielectric withstanding voltage
?Insulation Resistance
?Seal per Method 112 of MIL-STD-202
HECR-test condition A
M39022/11 - also tested to condition C, procedure llla.
Complete process and inspection data is maintained on file and
is available on special request.
Environmental
Parameter Condition Method
Vibration
Immersion
Shock
Humidity
Thermal Shock
Reference MIL-STD-202
CHARACTERISTICS
Insulation Resistance
Temparature(°C) 25°C 85°C 125°C
Megaohms x
Microfarads
100,000 7,000 700
Insulation Resistance
Dielectric Strength
Capacitors will withstand a DC potential of 200% rated
voltage for two (2) minutes without damage or
breakdown.
Test voltage is applied and discharged through a
resistance of 1 OHM per volt minimum, and at 25°C.
Capacitance Change
Temparature(°C) -55°C +25°C +85°C +125°C
Percentage Change
(typical)
-2.5 0 ?.0 ?.0
Capacitance Change
Dissipation Factor
When measured at 1KHz, the dissipation factor will not exceed
0.2% form +25?to 125°C
Electrical Data
Electronic Concept, Inc. Part Number System
HECR 102 H K
Type Capacitance
The first two digits are
significant, the third
represents the number of
zeros to follow to express
capacitance in picofarads
Voltage
B=50VDC
D=100VDC
E=150VDC
F=200VDC
H=300VDC
Tolerance
K=±10%
J=±5%
G=±2%
F=±1%
Note: To Specify an insulated version,add the letter "S" to the end of part number,
for example:HECR102HKS
MIL-C-39022/11 PART NUMBER SYSTEM
M39022/11 B 333 F M
Military
Specification
Voltage
B=50VDC
D=100VDC
E=150VDC
F=200VDC
H=300VDC
Capacitance
Expressed in
picofarads, the
first two digits
are significant
the third
represents the
number of
zeros (e.g., 333
equals 33,000
pF = .033 mF
Capacitance
Tolerance
K=±10%
J=±5%
G=±2%
F=±1%
Failure Rate
Note:Insulated case parts should be specified as such on purchase order.
MIL-C-39022/11 Styles: CHR21:50VDC CHR22:100VDC CHR24:200VDC
CHR23:150VDC CHR25:300VDC
Case Sizes
Case
No.
T
+.030
-.010
H
+.030
-.010
L
+.030
-.020
LS
±.015
1 .110 .210 .240 .200
2 .170 .270 .240 .200
Value
in
MFD
VDC
50 100 150
.001 - - 1
.0012 - - 1
.0015 - - 1
.0018 - - 1
.0022 - - 2
.0027 - - 2
.0033 - - 3
.0039 - - 3
.0047 - - 3
.0056 - 1 3
.0068 - 1 3
.0082 - 1 3
.010 1 2 3
.012 1 2 4
.015 1 2 4
.018 1 - 5
.022 1 - 5
.027 1 - 5
.033 2 3 6
.039 2 3 6
.047 2 3 -
.056 - 3 -
.068 3 4 -
.082 3 4 -
.10 3 5 -
.12 3 5 -
.15 3 6 -
3 .170 .270 .340 .300
4 .190 .380 .340 .300
5 .190 .380 .450 .400
6 .220 .500 .450 .400
.18 4 6 -
.22 4 6 -
.27 4 - -
.33 5 - -
.39 5 - -
.47 6 - -
.56 6 - -
.68 6 - -
.82 - - -
1.00 - - -
Mechanical Data
Revolutionary and safety technology
How To Order
TYPE
Metallized Polycarbonate - Hermetically Sealed HECR
CAPACITANCE IN PICOFARADS
The first digits are significant, the third digit represents the number of zeros to
follow to express capacitance in picofarads
102
VOLTAGE
A=30VDC, B=50VDC, D=100VDC, E=150VDC, F=200VDC, H=300VDC H
TOLERANCE
K=?0% J=?% G=2% F=1% K
Marking And DateCode
All capacitors are marked with HECR part number and date code, Those supplied to MIL-C-39022/11 are marked in accordance with
the military specification. The first two digits of the date code represent the year, the second two digits the week, i.e., 9452 id the 52nd
week of 1994, 9502 is the 2nd week of 1995.
Quality Assurance
Emphasis is placed on quality assurance. The functions of raw material inspection, manufacturing process inspection and final
product inspection are constantly being monitored by our Quality Control Department. Complete procedures are described in our
quality control manual. E.C.I. will continue to advance the state-of-the-art by utilizing and combining leading edge technology,
ultra-miniature capacitor designs and established reliability procedures.
SALES OFFICES
United States Europe
Eastern:
New Jersey 732-542-7880
Central:
Illinois 630-668-8747
email: sales@ecicaps.com
website:www.ecicaps.com
P/N 161011150 Rev.8
Ireland
Electronic Concepts LTD
IDA Estate, Oughterad
Co. Galway, Ireland
tel: +353-91-552385,552432
fax: +353-91-552387
email: sales@ecicaps.ie
website:www.electronicconcepts.ie
