HCPL0731R2 - ON SEMICONDUCTOR - Datasheet.Directory

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers

will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor

product management systems do not have the ability to manage part nomenclature that utilizes an underscore

(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain

device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated

device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please

email any questions regarding the system integration to Fairchild_questions@onsemi.com.

Is Now Part of

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number

of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right

to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and speciﬁcally disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON

Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON

Semiconductor data sheets and/or speciﬁcations can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s

technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA

Class 3 medical devices or medical devices with a same or similar classiﬁcation in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended

or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its ofﬁcers, employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor

is an Equal Opportunity/Afﬁrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1

April 2009

HCPL0700, HCPL0701, HCPL0730, HCPL0731

Low Input Current High Gain Split Darlington Optocouplers

Single Channel: HCPL0700, HCPL0701, Dual Channel: HCPL0730, HCPL0731

Features

■

Low input current: 0.5mA

■

Superior CTR: 2000%

■

Superior CMR – 10 kV/µs

■

CTR guaranteed 0°C to 70°C

■

U.L. Recognized (ﬁle# E90700)

■

VDE 0884 recognized (ﬁle# 136616)

– approval pending for HCPL0730/0731

■

BSI recognized (ﬁle# 8661, 8662)

– HCPL0700/0701 only

Applications

■

Digital logic ground isolation

■

Telephone ring detector

■

EIA-RS-232C line receiver

■

High common mode noise line receiver

■

µP bus isolation

■

Current loop receiver

Description

The HCPL0700, HCPL0701, HCPL0730 and HCPL0731

optocouplers consist of an AlGaAs LED optically coupled

to a high gain split darlington photodetector housed in a

compact 8-pin small outline package. The HCPL0730

and HCPL0731 devices have two channels per package

for optimum mounting density.

The split darlington conﬁguration separating the input

photodiode and the ﬁrst stage gain from the output tran-

sistor permits lower output saturation voltage and higher

speed operation than possible with conventional darling-

ton phototransistor optocoupler.

The combination of a very low input current of 0.5mA

and a high current transfer ratio of 2000% makes this

family particularly useful for input interface to MOS,

CMOS, LSTTL and EIA RS232C, while output compati-

bility is ensured to CMOS as well as high fan-out TTL

requirements.

Schematics

1

2

3

4 5

6

7

8

+

_

VF

VCC

VB

VO

GND

HCPL0700 / HCPL0701

N/C

1

2

3

4 5

6

7

8

+

_

VF1

VCC

V01

V02

GND

HCPL0730 / HCPL0731

VF2

_

+

Truth Table

LED VO

ON LOW

OFF HIGH

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 2

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Absolute Maximum Ratings

(T

A

= 25°C unless otherwise speciﬁed)

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be

operable above the recommended operating conditions and stressing the parts to these levels is not recommended.

In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.

The absolute maximum ratings are stress ratings only.

Symbol Parameter Value Units

T

STG

Storage Temperature -40 to +125 °C

T

OPR

Operating Temperature -40 to +85 °C

Reﬂow Temperature Proﬁle (Refer to page 12)

EMITTER

I

F

(avg) DC/Average Forward Input Current 20 mA

I

F

(pk) Peak Forward Input Current (50% duty cycle, 1 ms P.W.) 40 mA

I

F

(trans) Peak Transient Input Current - (

≤

1 µs P.W., 300 pps) 1.0 A

V

R

Reverse Input Voltage 5 V

P

D

Input Power Dissipation 35 mW

DETECTOR

I

O

(avg) Average Output Current (Pin 6) 60 mA

V

EBR

Emitter-Base Reverse Voltage HCPL0700/HCPL0701 0.5 V

V

CC

,

V

O

Supply Voltage, Output Voltage HCPL0700/HCPL0730 -0.5 to 7 V

HCPL0701/HCPL0731 -0.5 to 18

P

D

Output power dissipation 100 mW

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 3

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Electrical Characteristics

(T

A

= 0 to 70°C unless otherwise speciﬁed)

Individual Component Characteristics

Transfer Characteristics

Isolation Characteristics

*All typicals at T

A

= 25°C

Symbol Parameter Test Conditions Device Min. Typ.* Max Unit

EMITTER

V

F

Input Forward

Voltage

I

F

= 1.6mA T

A

= 25°C HCPL0700/01 1.0 1.25 1.7 V

HCPL0730/31 1.35

All 1.75

BV

R

Input Reverse

Breakdown Voltage

T

A

=25°C, I

R

= 10µA All 5.0

DETECTOR

I

OH

Logic High Output

Current

I

F

= 0mA, V

O

= V

CC

= 18V HCPL0701/31 0.01 100 µA

I

F

= 0mA, V

O

= V

CC

= 7V HCPL0700/30 0.01 250

I

CCL

Logic Low Supply

Current

I

F

= 1.6mA, V

O

= Open, V

CC

= 18V HCPL0700/01 0.4 1.5 mA

I

F1

= I

F2

= 1.6mA, V

CC

= 7V HCPL0730 0.8 3

V

O1

= V

O2

= Open, V

CC

= 18V HCPL0731 1

I

CCH

Logic High

Supply Current

I

F

= 0mA, V

O

= Open, V

CC

= 18V HCPL0700/01 10 µA

I

F1

= I

F2

= 0, V

CC

= 7V HCPL0730 0.001 20

V

O1

= V

O2

= Open, V

CC

= 18V HCPL0731 0.01

Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit

CTR

COUPLED

I

F

= 0.5mA, V

O

= 0.4 V, V

CC

= 4.5V HCPL0701/31 400 5000 %

Current Transfer

Ratio (Note 1, 2)

I

F

= 1.6mA,

V

O

= 0.4 V,

V

CC

= 4.5V

HCPL0700 300 2600

HCPL0701 500 2600

HCPL0730 300 5000

HCPL0731 500 5000

V

OL

Logic Low Output

Voltage

I

F

= 0.5mA, I

O

= 2mA, V

CC

= 4.5V HCPL0701

HCPL0731

0.4 V

I

F

= 1.6mA, I

O

= 8mA, V

CC

= 4.5V 0.4

I

F

= 5mA, I

O

= 15mA, V

CC

= 4.5V 0.4

I

F

= 12mA, I

O

= 24mA, V

CC

= 4.5V 0.4

I

F

= 1.6mA, I

O

= 4.8mA, V

CC

= 4.5V HCPL0700/0730 0.4

Symbol Characteristics Test Conditions Min. Typ.* Max. Unit

I

I-O

Input-Output

Insulation Leakage Current

Relative humidity = 45%,

T

A

= 25°C, t = 5 s,

V

I-O

= 3000 VDC (Note 4)

1.0 µA

V

ISO

Withstand Insulation Test

Voltage

R

H

≤

50%, T

A

= 25°C,

I

I-O

≤

2µA, t = 1 min.

(Note 4, 5)

2500 V

RMS

R

I-O

Resistance (Input to Output) V

I-O

= 500 VDC (Note 4) 10

12

Ω

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 4

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Electrical Characteristics

(T

A

= 0 to 70°C unless otherwise speciﬁed)

Switching Characteristics

(V

CC

= 5V)

*All typicals at T

A

= 25°C

Notes:

1. Current Transfer Ratio is defined as a ratio of output collector current, I

O

, to the forward LED input current, I

F

,

times 100%.

2. Pin 7 open. Use of a resistor between pins 5 and 7 will decrease gain and delay time.

3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dV

CM

/dt on the

leading edge of the common mode pulse signal, V

CM

, to assure that the output will remain in a logic high state

(i.e., V

O

> 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVCM/dt

on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state

(i.e., VO<0.8 V).

4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted

together.

5. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.

Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit

TPHL Propagation Delay

Time to Logic Low

(Note 2) (Fig. 14)

RL = 4.7kΩ, IF = 0.5mA HCPL0701 30 µs

HCPL0731 120

TA = 25°C HCPL0701 3 25

HCPL0731 5 100

RL = 270 Ω, IF = 12mA HCPL0701 2

HCPL0731 3

TA = 25°C HCPL0701 0.3 1

HCPL0731 0.4 2

RL = 2.2 kΩ, IF = 1.6mA HCPL0700 15

HCPL0730/0731 25

TA = 25°C HCPL0700 1 10

HCPL0730/0731 2 20

TPLH Propagation Delay

Time to Logic High

(Note 2) (Fig. 14)

RL = 4.7 kΩ, IF = 0.5mA HCPL0701/31 90 µs

TA = 25°C HCPL0701/31 12 60

RL = 270 Ω, IF = 12mA HCPL0701 10

HCPL0731 15

TA = 25°C HCPL0701 1.6 7

HCPL0731 1.6 10

RL = 2.2 kΩ, IF = 1.6mA HCPL0700/30/31 50

TA = 25°C HCPL0700/30/31 7 35

|CMH| Common Mode

Transient

Immunity at

Logic High

IF = 0mA, |VCM| = 10 VP-P,

TA = 25°C, RL = 2.2kΩ

(Note 3) (Fig. 15)

ALL 1,000 10,000 V/µs

|CML| Common Mode

Transient

Immunity at

Logic Low

IF = 1.6mA, |VCM| = 10 VP-P,

TA = 25°C, RL = 2.2 kΩ

(Note 3) (Fig. 15)

ALL 1,000 10,000 V/µs

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 5

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Typical Performance Curves

Fig. 1 Propagation Delay vs. Temperature

(HCPL0700, HCPL0701)

TA - TEMPERATURE (˚C)

-60 -40 -20 0 20 40 60 80 100

t

p

- PROPAGATION DELAY (µs)

0

5

10

15

20

25

30

35

t

p

- PROPAGATION DELAY (µs)

Fig. 3 Propagation Delay vs. Temperature

(HCPL0700, HCPL0701)

-60 -40 -20 0 20 40 60 80 100

0

1

2

3

4

tPHL

tPLH

IF = 12 mA

VCC = 5 V

RL = 270 Ω

1/f = 50 µs

TA - TEMPERATURE (˚C)

Fig. 4 Logic High Output Current vs. Temperature

(HCPL0700, HCPL0701)

-40 -20 0 20 40 60 80 100

I

OH

- LOGIC HIGH OUTPUT CURRENT (nA)

0.01

0.1

1

10

100

1000 VCC = VO = 5.5 V

TA - TEMPERATURE (˚C)

t

p

- PROPAGATION DELAY (µs)

Fig. 5 Propagation Delay vs. Input Forward Currrent

(HCPL0730, HCPL0731)

012345678910

0

4

8

12

16

20

TA - TEMPERATURE (˚C)

Fig. 2 Propagation Delay vs. Temperature

(HCPL0700, HCPL0701)

-60 -40 -20 0 20 40 60 80 100

t

p

- PROPAGATION DELAY (µs)

0

2

4

6

8

10

12

14

16

18

20

tPHL

tPLH

IF = 1.6 mA

VCC = 5 V

RL = 2.2 kΩ

1/f = 50 µs

tPLH

tPHL

Fig. 6 Output Current vs. Input Forward Current

(HCPL0700, HCPL0701)

IF - INPUT FORWARD CURRENT (mA)

0.01 0.1 1 10

I

O

- OUTPUT CURRENT (mA)

0.01

0.1

1

10

100

TA = 70˚C

TA = 25˚C

TA = 0˚C

TA = -40˚C

TA = 85˚C

VCC

= 5V

VO = 0.4V

TA = 25

VCC = 5V

tPLH

RL = 4.7kΩ

tPHL

RL = 2.2kΩ or 4.7kΩ

tPLH

RL = 2.2kΩ

VCC = 5 V

IF = 0.5 mA

RL = 4.7 kΩ

1/f = 50 µs

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 6

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Typical Performance Curves (Continued)

Fig. 7 Input Forward Current vs. Forward Voltage

(HCPL0700, HCPL0701) Fig. 8 Input Forward Current vs. Forward Voltage

(HCPL0730, HCPL0731)

VF - FORWARD VOLTAGE (V)

1.1 1.2 1.3 1.4 1.5 1.6

I

F

- FORWARD CURRENT (mA)

0.001

0.01

0.1

1

10

100

T

A

= 85˚C

T

A

= 70˚C

T

A

= 25˚C

T

A

= 0˚C

T

A

= -40˚C

IF - INPUT FORWARD CURRENT (mA)

0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6

I

CCL

- LOGIC LOW SUPPLY CURRENT (mA)

I

CC

(PER CHANNEL) - SUPPLY CURRENT (mA)

0.0

0.1

0.2

0.3

0.4

0.5

V

CC

= 18V

V

CC

= 5V

Logic Low Supply Current vs.

Input Forward Current

Fig. 9 Logic Low Supply Current vs. Input Forward Current

(HCPL0700, HCPL0701)

Fig. 10 Supply Current vs. Input Forward Current

(HCPL0730, HCPL0731)

Fig. 11 DC Transfer Characteristics

(HCPL0700, HCPL0701) Fig. 12 DC Transfer Characteristics

(HCPL0730, HCPL0731)

012

0 0

20

40

60

80

I

F

= 5.0mA

I

F

= 4.5mA

I

F

= 4.0mA

I

F

= 3.5mA

I

F

= 3.0mA

I

F

= 2.5mA

V

CC

= 5V

T

A

= 25˚C

I

F

= 0.5mA

I

F

= 1.0mA

I

F

= 1.5mA

I

F

= 2.0mA

T

A

= 85°C

T

A

= 70°C

T

A

= 25°C

T

A

=

0

°C

T

A

= -40°C

VF - FORWARD VOLTAGE (V)

1.11.00.9 1.2 1.3 1.4 1.5 1.6 1.7

I

F

- FORWARD CURRENT (mA)

0.001

0.01

0.1

1

10

100

T

A

= 25°C

V

CC

= 18V

V

CC

= 7V

1010.1

0.01

0.1

1.0

10

IF - INPUT FORWARD CURRENT (mA)

1mA

3.5mA

3mA

I

F

= 5mA

T

A

= 25°C

V

CC

= 5V

2mA

2.5mA

1.5mA

0.5mA

4mA

I

F

= 4.5mA

0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

40

60

80

100

120

140

VO - OUTPUT VOLTAGE (V) VO - OUTPUT VOLTAGE (V)

I

O

- OUTPUT CURRENT (mA)

I

O

- OUTPUT CURRENT (mA)

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 7

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Typical Performance Curves (Continued)

Fig. 13 Current Transfer Ratio vs. Input Forward Current

(HCPL0700, HCPL0701)

IF - INPUT FORWARD CURRENT (mA)

0.1 1 10

CTR - CURRENT TRANSFER RATIO (%)

0

500

1000

1500

2000

2500

3000

3500

TA

= 85°C

TA

= 70°C

TA

= 25°C

TA

= 0°C

TA

= -40°C

VCC = 5V

VO = 0.4V

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 8

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Test Circuits

Fig. 15 Common Mode Immunity T

e

st

C

ircui

t

T

Fi

g

. 14 Switchin

g

T

i

m

e

T

est Circuit

TT

PLH

OL

V

O

V

O

5

V

1.

5

V

F

I

1.

5

V

T

PHL

T

4

5

N

o

i

se

1

2

S

hiel

d

8

7

6

+

5

V

O

V

CC

V

01

V

02

G

N

D

V

F1

-

+

F2

V

F

I

+

1

0%

D

U

TY

C

Y

C

L

E

I

/

f < 1

00

µ

S

F

I

M

O

NIT

OR

L

0

.1

µ

F

P

u

l

se

G

enerato

r

tr =

5

n

s

Z = 50

O

V

3

I Monitor

F

4

I/ < 100

µ

s

tr =

5

n

s

G

enerato

r

P

u

l

se

Z = 50

f

O

V

F

V

I

V

F

2

1

V

O

V

O

6

5

G

N

D

7

8

V

O

B

V

B

L

R

CC

V

C

+

5

V

0

.1

µ

F

C = 15 pF*

L

Test

C

ircuit for H

C

PL-

0

7

30

and H

C

PL-

0

7

31

Test

C

ircuit for H

C

PL-

0

7

00

and H

C

PL-

0

7

01

Test

C

ircuit for H

C

PL-

0

7

30

and H

C

PL-

0

7

31

Test

C

ircuit for H

C

PL-

0

7

00

and H

C

PL-

0

7

01

m

R

Rm

S

hiel

d

N

o

i

se

-

C = 15 pF*

Pulse

G

e

n

CM

V

C

V

FF

V

B

A

+

-

+

5

V

O

V

-

I

F

3

4

F

V

F

2

1

S

hiel

d

N

o

i

se

6

O

5

G

N

D

7

8

V

O

B

V

B

CC

V

C

L

R

Switch at A : I = 0 mA

F

Switch at B : I = 1.6 mA

F

t

r

V

O

V

OL

V

5

V

0

V

1

0%

1

0%

90%

CM

V 10 V

CMC

G

ND

+

-

F2

V

F1

-

+

5

V

CC

V

L

V

02

V

R

01

V

O

V

CM

V

A

B

Pulse

G

e

n

F

I

+

-

+

0.1

µ

F

f

t

FF

V

F

90%

1

3

4

2

S

hiel

d

N

o

i

se

8

6

5

7

0

.1

µ

F

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 9

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Ordering Information

Marking Information

Option Part Number Example Description

V HCPL0700V VDE 0884

R2 HCPL0700R2 Tape and reel (2500 units per reel)

R2V HCPL0700R2V VDE 0884, Tape and reel (2500 units per reel)

1

2

6

43 5

Deﬁnitions

1 Fairchild logo

2 Device number

3VDE mark (Note: Only appears on parts ordered with VDE

option – See order entry table)

4 One digit year code, e.g., ‘3’

5 Two digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

700

SYYXV

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 10

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Carrier Tape Speciﬁcation

4.0 ± 0.10

Ø1.5 MIN

User Direction of Feed

2.0 ± 0.05

1.75 ± 0.10

5.5 ± 0.05

12.0 ± 0.3

8.0 ± 0.10

0.30 MAX

8.3 ± 0.10

3.50 ± 0.20

Dimensions in mm

0.1 MAX 6.40 ± 0.20

5.20 ± 0.20

Ø1.5 ± 0.1

HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 11

HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers

Reﬂow Proﬁle

Proﬁle Freature Pb-Free Assembly Proﬁle

Temperature Min. (Tsmin) 150°C

Temperature Max. (Tsmax) 200°C

Time (tS) from (Tsmin to Tsmax) 60–120 seconds

Ramp-up Rate (tL to tP)3°C/second max.

Liquidous Temperature (TL)217°C

Time (tL) Maintained Above (TL)60–150 seconds

Peak Body Package Temperature 260°C +0°C / –5°C

Time (tP) within 5°C of 260°C 30 seconds

Ramp-down Rate (TP to TL)6°C/second max.

Time 25°C to Peak Temperature 8 minutes max.

Time (seconds)

Temperature (°C)

Time 25°C to Peak

260

240

220

200

180

160

140

120

100

80

60

40

20

0

TL

ts

tL

tP

TP

Tsmax

Tsmin

120

Preheat Area

Max. Ramp-up Rate = 3°C/S

Max. Ramp-down Rate = 6°C/S

240 360

www.onsemi.com

1

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

www.onsemi.com

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative