To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
April 2009
HCPL0700, HCPL0701, HCPL0730, HCPL0731
Low Input Current High Gain Split Darlington Optocouplers
Single Channel: HCPL0700, HCPL0701, Dual Channel: HCPL0730, HCPL0731
Features
■
Low input current: 0.5mA
■
Superior CTR: 2000%
■
Superior CMR – 10 kV/µs
■
CTR guaranteed 0°C to 70°C
■
U.L. Recognized (file# E90700)
■
VDE 0884 recognized (file# 136616)
– approval pending for HCPL0730/0731
■
BSI recognized (file# 8661, 8662)
– HCPL0700/0701 only
Applications
■
Digital logic ground isolation
■
Telephone ring detector
■
EIA-RS-232C line receiver
■
High common mode noise line receiver
■
µP bus isolation
■
Current loop receiver
Description
The HCPL0700, HCPL0701, HCPL0730 and HCPL0731
optocouplers consist of an AlGaAs LED optically coupled
to a high gain split darlington photodetector housed in a
compact 8-pin small outline package. The HCPL0730
and HCPL0731 devices have two channels per package
for optimum mounting density.
The split darlington configuration separating the input
photodiode and the first stage gain from the output tran-
sistor permits lower output saturation voltage and higher
speed operation than possible with conventional darling-
ton phototransistor optocoupler.
The combination of a very low input current of 0.5mA
and a high current transfer ratio of 2000% makes this
family particularly useful for input interface to MOS,
CMOS, LSTTL and EIA RS232C, while output compati-
bility is ensured to CMOS as well as high fan-out TTL
requirements.
Schematics
1
2
3
4 5
6
7
8
+
_
VF
VCC
VB
VO
GND
HCPL0700 / HCPL0701
N/C
N/C
1
2
3
4 5
6
7
8
+
_
VF1
VCC
V01
V02
GND
HCPL0730 / HCPL0731
VF2
_
+
Truth Table
LED VO
ON LOW
OFF HIGH
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 2
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol Parameter Value Units
T
STG
Storage Temperature -40 to +125 °C
T
OPR
Operating Temperature -40 to +85 °C
Reflow Temperature Profile (Refer to page 12)
EMITTER
I
F
(avg) DC/Average Forward Input Current 20 mA
I
F
(pk) Peak Forward Input Current (50% duty cycle, 1 ms P.W.) 40 mA
I
F
(trans) Peak Transient Input Current - (
≤
1 µs P.W., 300 pps) 1.0 A
V
R
Reverse Input Voltage 5 V
P
D
Input Power Dissipation 35 mW
DETECTOR
I
O
(avg) Average Output Current (Pin 6) 60 mA
V
EBR
Emitter-Base Reverse Voltage HCPL0700/HCPL0701 0.5 V
V
CC
,
V
O
Supply Voltage, Output Voltage HCPL0700/HCPL0730 -0.5 to 7 V
HCPL0701/HCPL0731 -0.5 to 18
P
D
Output power dissipation 100 mW
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 3
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics
(T
A
= 0 to 70°C unless otherwise specified)
Individual Component Characteristics
Transfer Characteristics
Isolation Characteristics
*All typicals at T
A
= 25°C
Symbol Parameter Test Conditions Device Min. Typ.* Max Unit
EMITTER
V
F
Input Forward
Voltage
I
F
= 1.6mA T
A
= 25°C HCPL0700/01 1.0 1.25 1.7 V
HCPL0730/31 1.35
All 1.75
BV
R
Input Reverse
Breakdown Voltage
T
A
=25°C, I
R
= 10µA All 5.0
DETECTOR
I
OH
Logic High Output
Current
I
F
= 0mA, V
O
= V
CC
= 18V HCPL0701/31 0.01 100 µA
I
F
= 0mA, V
O
= V
CC
= 7V HCPL0700/30 0.01 250
I
CCL
Logic Low Supply
Current
I
F
= 1.6mA, V
O
= Open, V
CC
= 18V HCPL0700/01 0.4 1.5 mA
I
F1
= I
F2
= 1.6mA, V
CC
= 7V HCPL0730 0.8 3
V
O1
= V
O2
= Open, V
CC
= 18V HCPL0731 1
I
CCH
Logic High
Supply Current
I
F
= 0mA, V
O
= Open, V
CC
= 18V HCPL0700/01 10 µA
I
F1
= I
F2
= 0, V
CC
= 7V HCPL0730 0.001 20
V
O1
= V
O2
= Open, V
CC
= 18V HCPL0731 0.01
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
CTR
COUPLED
I
F
= 0.5mA, V
O
= 0.4 V, V
CC
= 4.5V HCPL0701/31 400 5000 %
Current Transfer
Ratio (Note 1, 2)
I
F
= 1.6mA,
V
O
= 0.4 V,
V
CC
= 4.5V
HCPL0700 300 2600
HCPL0701 500 2600
HCPL0730 300 5000
HCPL0731 500 5000
V
OL
Logic Low Output
Voltage
I
F
= 0.5mA, I
O
= 2mA, V
CC
= 4.5V HCPL0701
HCPL0731
0.4 V
I
F
= 1.6mA, I
O
= 8mA, V
CC
= 4.5V 0.4
I
F
= 5mA, I
O
= 15mA, V
CC
= 4.5V 0.4
I
F
= 12mA, I
O
= 24mA, V
CC
= 4.5V 0.4
I
F
= 1.6mA, I
O
= 4.8mA, V
CC
= 4.5V HCPL0700/0730 0.4
Symbol Characteristics Test Conditions Min. Typ.* Max. Unit
I
I-O
Input-Output
Insulation Leakage Current
Relative humidity = 45%,
T
A
= 25°C, t = 5 s,
V
I-O
= 3000 VDC (Note 4)
1.0 µA
V
ISO
Withstand Insulation Test
Voltage
R
H
≤
50%, T
A
= 25°C,
I
I-O
≤
2µA, t = 1 min.
(Note 4, 5)
2500 V
RMS
R
I-O
Resistance (Input to Output) V
I-O
= 500 VDC (Note 4) 10
12
Ω
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 4
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics
(T
A
= 0 to 70°C unless otherwise specified)
Switching Characteristics
(V
CC
= 5V)
*All typicals at T
A
= 25°C
Notes:
1. Current Transfer Ratio is defined as a ratio of output collector current, I
O
, to the forward LED input current, I
F
,
times 100%.
2. Pin 7 open. Use of a resistor between pins 5 and 7 will decrease gain and delay time.
3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dV
CM
/dt on the
leading edge of the common mode pulse signal, V
CM
, to assure that the output will remain in a logic high state
(i.e., V
O
> 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVCM/dt
on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state
(i.e., VO<0.8 V).
4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
5. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
TPHL Propagation Delay
Time to Logic Low
(Note 2) (Fig. 14)
RL = 4.7kΩ, IF = 0.5mA HCPL0701 30 µs
HCPL0731 120
TA = 25°C HCPL0701 3 25
HCPL0731 5 100
RL = 270 Ω, IF = 12mA HCPL0701 2
HCPL0731 3
TA = 25°C HCPL0701 0.3 1
HCPL0731 0.4 2
RL = 2.2 kΩ, IF = 1.6mA HCPL0700 15
HCPL0730/0731 25
TA = 25°C HCPL0700 1 10
HCPL0730/0731 2 20
TPLH Propagation Delay
Time to Logic High
(Note 2) (Fig. 14)
RL = 4.7 kΩ, IF = 0.5mA HCPL0701/31 90 µs
TA = 25°C HCPL0701/31 12 60
RL = 270 Ω, IF = 12mA HCPL0701 10
HCPL0731 15
TA = 25°C HCPL0701 1.6 7
HCPL0731 1.6 10
RL = 2.2 kΩ, IF = 1.6mA HCPL0700/30/31 50
TA = 25°C HCPL0700/30/31 7 35
|CMH| Common Mode
Transient
Immunity at
Logic High
IF = 0mA, |VCM| = 10 VP-P,
TA = 25°C, RL = 2.2kΩ
(Note 3) (Fig. 15)
ALL 1,000 10,000 V/µs
|CML| Common Mode
Transient
Immunity at
Logic Low
IF = 1.6mA, |VCM| = 10 VP-P,
TA = 25°C, RL = 2.2 kΩ
(Note 3) (Fig. 15)
ALL 1,000 10,000 V/µs
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 5
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves
Fig. 1 Propagation Delay vs. Temperature
(HCPL0700, HCPL0701)
TA - TEMPERATURE (˚C)
TA - TEMPERATURE (˚C)
-60 -40 -20 0 20 40 60 80 100
t
p
- PROPAGATION DELAY (µs)
0
5
10
15
20
25
30
35
t
p
- PROPAGATION DELAY (µs)
Fig. 3 Propagation Delay vs. Temperature
(HCPL0700, HCPL0701)
-60 -40 -20 0 20 40 60 80 100
0
1
2
3
4
tPHL
tPLH
IF = 12 mA
VCC = 5 V
RL = 270 Ω
1/f = 50 µs
TA - TEMPERATURE (˚C)
Fig. 4 Logic High Output Current vs. Temperature
(HCPL0700, HCPL0701)
-40 -20 0 20 40 60 80 100
I
OH
- LOGIC HIGH OUTPUT CURRENT (nA)
0.01
0.1
1
10
100
1000 VCC = VO = 5.5 V
TA - TEMPERATURE (˚C)
t
p
- PROPAGATION DELAY (µs)
Fig. 5 Propagation Delay vs. Input Forward Currrent
(HCPL0730, HCPL0731)
012345678910
0
4
8
12
16
20
TA - TEMPERATURE (˚C)
Fig. 2 Propagation Delay vs. Temperature
(HCPL0700, HCPL0701)
-60 -40 -20 0 20 40 60 80 100
t
p
- PROPAGATION DELAY (µs)
0
2
4
6
8
10
12
14
16
18
20
tPHL
tPLH
IF = 1.6 mA
VCC = 5 V
RL = 2.2 kΩ
1/f = 50 µs
tPLH
tPHL
Fig. 6 Output Current vs. Input Forward Current
(HCPL0700, HCPL0701)
IF - INPUT FORWARD CURRENT (mA)
0.01 0.1 1 10
I
O
- OUTPUT CURRENT (mA)
0.01
0.1
1
10
100
TA = 70˚C
TA = 25˚C
TA = 0˚C
TA = -40˚C
TA = 85˚C
VCC
= 5V
VO = 0.4V
TA = 25
VCC = 5V
tPLH
RL = 4.7kΩ
tPHL
RL = 2.2kΩ or 4.7kΩ
tPLH
RL = 2.2kΩ
VCC = 5 V
IF = 0.5 mA
RL = 4.7 kΩ
1/f = 50 µs
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 6
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 7 Input Forward Current vs. Forward Voltage
(HCPL0700, HCPL0701) Fig. 8 Input Forward Current vs. Forward Voltage
(HCPL0730, HCPL0731)
VF - FORWARD VOLTAGE (V)
1.1 1.2 1.3 1.4 1.5 1.6
I
F
- FORWARD CURRENT (mA)
0.001
0.01
0.1
1
10
100
T
A
= 85˚C
T
A
= 70˚C
T
A
= 25˚C
T
A
= 0˚C
T
A
= -40˚C
IF - INPUT FORWARD CURRENT (mA)
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
I
CCL
- LOGIC LOW SUPPLY CURRENT (mA)
I
CC
(PER CHANNEL) - SUPPLY CURRENT (mA)
0.0
0.1
0.2
0.3
0.4
0.5
V
CC
= 18V
V
CC
= 5V
Logic Low Supply Current vs.
Input Forward Current
Fig. 9 Logic Low Supply Current vs. Input Forward Current
(HCPL0700, HCPL0701)
Fig. 10 Supply Current vs. Input Forward Current
(HCPL0730, HCPL0731)
Fig. 11 DC Transfer Characteristics
(HCPL0700, HCPL0701) Fig. 12 DC Transfer Characteristics
(HCPL0730, HCPL0731)
012
0 0
20
20
40
60
80
I
F
= 5.0mA
I
F
= 4.5mA
I
F
= 4.0mA
I
F
= 3.5mA
I
F
= 3.0mA
I
F
= 2.5mA
V
CC
= 5V
T
A
= 25˚C
I
F
= 0.5mA
I
F
= 1.0mA
I
F
= 1.5mA
I
F
= 2.0mA
T
A
= 85°C
T
A
= 70°C
T
A
= 25°C
T
A
=
0
°C
T
A
= -40°C
VF - FORWARD VOLTAGE (V)
1.11.00.9 1.2 1.3 1.4 1.5 1.6 1.7
I
F
- FORWARD CURRENT (mA)
0.001
0.01
0.1
1
10
100
T
A
= 25°C
V
CC
= 18V
V
CC
= 7V
1010.1
0.01
0.1
1.0
10
IF - INPUT FORWARD CURRENT (mA)
1mA
3.5mA
3mA
I
F
= 5mA
T
A
= 25°C
V
CC
= 5V
2mA
2.5mA
1.5mA
0.5mA
4mA
I
F
= 4.5mA
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
40
60
80
100
120
140
VO - OUTPUT VOLTAGE (V) VO - OUTPUT VOLTAGE (V)
I
O
- OUTPUT CURRENT (mA)
I
O
- OUTPUT CURRENT (mA)
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 7
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 13 Current Transfer Ratio vs. Input Forward Current
(HCPL0700, HCPL0701)
IF - INPUT FORWARD CURRENT (mA)
0.1 1 10
CTR - CURRENT TRANSFER RATIO (%)
0
500
1000
1500
2000
2500
3000
3500
TA
= 85°C
TA
= 70°C
TA
= 25°C
TA
= 0°C
TA
= -40°C
VCC = 5V
VO = 0.4V
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 8
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Test Circuits
Fig. 15 Common Mode Immunity T
e
st
C
ircui
t
T
T
Fi
g
. 14 Switchin
g
T
i
m
e
T
est Circuit
TT
PLH
OL
V
O
V
O
5
V
1.
5
V
F
I
1.
5
V
T
PHL
T
4
5
N
o
i
se
1
2
S
hiel
d
8
7
6
+
5
V
O
V
V
CC
V
01
V
02
G
N
D
V
F1
-
+
F2
V
F
I
+
1
0%
D
U
TY
C
Y
C
L
E
I
/
f < 1
00
µ
S
F
I
M
O
NIT
OR
L
0
.1
µ
F
P
u
l
se
G
enerato
r
tr =
5
n
s
Z = 50
O
V
3
I Monitor
F
4
I/ < 100
µ
s
tr =
5
n
s
G
enerato
r
P
u
l
se
Z = 50
f
O
V
F
V
V
I
V
F
2
1
V
O
V
V
O
6
5
G
N
D
7
8
V
O
B
V
B
L
R
CC
V
C
+
5
V
0
.1
µ
F
C = 15 pF*
L
Test
C
ircuit for H
C
PL-
0
7
30
and H
C
PL-
0
7
31
Test
C
ircuit for H
C
PL-
0
7
00
and H
C
PL-
0
7
01
Test
C
ircuit for H
C
PL-
0
7
30
and H
C
PL-
0
7
31
Test
C
ircuit for H
C
PL-
0
7
00
and H
C
PL-
0
7
01
m
R
Rm
S
hiel
d
N
o
i
se
-
C = 15 pF*
Pulse
G
e
n
CM
V
C
V
FF
V
V
B
A
+
-
+
5
V
O
V
-
I
F
3
4
F
V
F
2
1
S
hiel
d
N
o
i
se
6
O
5
G
N
D
7
8
V
O
B
V
B
CC
V
C
L
R
Switch at A : I = 0 mA
F
Switch at B : I = 1.6 mA
F
t
r
V
O
O
V
OL
V
5
V
0
V
1
0%
1
0%
90%
CM
V 10 V
CMC
G
ND
+
-
F2
V
V
F1
-
+
5
V
CC
V
L
V
02
V
R
01
V
O
V
CM
V
V
A
B
Pulse
G
e
n
F
I
+
-
+
0.1
µ
F
f
t
FF
V
F
90%
1
3
4
2
S
hiel
d
N
o
i
se
8
6
5
7
0
.1
µ
F
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 9
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Ordering Information
Marking Information
Option Part Number Example Description
V HCPL0700V VDE 0884
R2 HCPL0700R2 Tape and reel (2500 units per reel)
R2V HCPL0700R2V VDE 0884, Tape and reel (2500 units per reel)
1
2
6
43 5
Definitions
1 Fairchild logo
2 Device number
3VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4 One digit year code, e.g., ‘3’
5 Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
700
SYYXV
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 10
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Carrier Tape Specification
4.0 ± 0.10
Ø1.5 MIN
User Direction of Feed
2.0 ± 0.05
1.75 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
8.0 ± 0.10
0.30 MAX
8.3 ± 0.10
3.50 ± 0.20
Dimensions in mm
0.1 MAX 6.40 ± 0.20
5.20 ± 0.20
Ø1.5 ± 0.1
©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1 11
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Reflow Profile
Profile Freature Pb-Free Assembly Profile
Temperature Min. (Tsmin) 150°C
Temperature Max. (Tsmax) 200°C
Time (tS) from (Tsmin to Tsmax) 60–120 seconds
Ramp-up Rate (tL to tP)3°C/second max.
Liquidous Temperature (TL)217°C
Time (tL) Maintained Above (TL)60–150 seconds
Peak Body Package Temperature 260°C +0°C / –5°C
Time (tP) within 5°C of 260°C 30 seconds
Ramp-down Rate (TP to TL)6°C/second max.
Time 25°C to Peak Temperature 8 minutes max.
Time (seconds)
Temperature (°C)
Time 25°C to Peak
260
240
220
200
180
160
140
120
100
80
60
40
20
0
TL
ts
tL
tP
TP
Tsmax
Tsmin
120
Preheat Area
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
240 360
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
