To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
tm
April 2007
FDG8842CZ Complementary PowerTrench® MOSFET
©2007 Fairchild Semiconductor Corporation
FDG8842CZ Rev.B
www.fairchildsemi.com
1
FDG8842CZ
Complementary PowerTrench® MOSFET
Q1:30V,0.75A,0.4Ω; Q2:25V,0.41A,1.1Ω
Features
Q1: N-Channel
Max rDS(on) = 0.4Ω at VGS = 4.5V, ID = 0.75A
Max rDS(on) = 0.5Ω at VGS = 2.7V, ID = 0.67A
Q2: P-Channel
Max rDS(on) = 1.1Ω at VGS = –4.5V, ID = –0.41A
Max rDS(on) = 1.5Ω at VGS = –2.7V, ID = –0.25A
Very low level gate drive requirements allowing direct
operation in 3V circuits(VGS(th) <1.5V)
Very small package outline SC70-6
RoHS Compliant
General Description
These N & P-Channel logic level enhancement mode field effect
transistors are produced using Fairchild’s proprietary, high cell
density, DMOS technology. This very high density process is
especially tailored to minimize on-state resistance. This
device has been designed especially for low voltage applica-
tions as a replacement for bipolar digital transistors and small
signal MOSFETs. Since bias resistors are not required, this dual
digital FET can replace several different digital transistors, with
different bias resistor values.
MOSFET Maximum Ratings TA = 25°C unless otherwise noted
Thermal Characteristics
Package Marking and Ordering Information
Symbol Parameter Q1 Q2 Units
VDS Drain to Source Voltage 30 –25 V
VGS Gate to Source Voltage ±12 –8 V
ID
Drain Current -Continuous 0.75 –0.41 A
-Pulsed 2.2 –1.2
PD
Power Dissipation for Single Operation (Note 1a)
(Note 1b)
0.36 W
0.30
TJ, TSTG Operating and Storage Junction Temperature Range –55 to +150 °C
RθJA Thermal Resistance, Junction to Ambient Single operation (Note 1a) 350 °C/W
RθJA Thermal Resistance, Junction to Ambient Single operation (Note 1b) 415
Device Marking Device Reel Size Tape Width Quantity
.42 FDG8842CZ 7” 8mm 3000 units
S1
G1
D2
D1
G2
S2
S1
S2
G2
D1
D2
G1
Pin 1
SC70-6
Q1
Q2
FDG8842CZ Complementary PowerTrench® MOSFET
www.fairchildsemi.com
2
©2007 Fairchild Semiconductor Corporation
FDG8842CZ Rev.B
Electrical Characteristics TJ = 25°C unless otherwise noted
Symbol Parameter Test Conditions Type Min Typ Max Units
Off Characteristics
BVDSS
Drain to Source Breakdown
Voltage
ID = 250μA, VGS = 0V
ID = –250μA, VGS = 0V
Q1
Q2
30
–25 V
ΔBVDSS
ΔTJ
Breakdown Voltage Temperature
Coefficient
ID = 250μA, referenced to 25°C
ID = –250μA, referenced to 25°C
Q1
Q2 25
–21 mV/°C
IDSS Zero Gate Voltage Drain Current VDS = 24V, VGS = 0V
VDS = –20V, VGS = 0V
Q1
Q2
1
–1 μA
IGSS Gate to Source Leakage Current VGS = ±12V, VDS= 0V
VGS = –8V, VDS= 0V
Q1
Q2 ±10
–100
μA
nA
On Characteristics
VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250μA
VGS = VDS, ID = –250μA
Q1
Q2
0.65
–0.65
1.0
–0.8
1.5
–1.5 V
ΔVGS(th)
ΔTJ
Gate to Source Threshold Voltage
Temperature Coefficient
ID = 250μA, referenced to 25°C
ID = –250μA, referenced to 25°C
Q1
Q2
–3.0
1.8 mV/°C
rDS(on)
Static Drain to Source On
Resistance
VGS = 4.5V, ID = 0.75A
VGS = 2.7V, ID = 0.67A
VGS = 4.5V, ID = 0.75A ,TJ = 125°C
Q1
0.25
0.29
0.36
0.4
0.5
0.6 Ω
VGS = –4.5V, ID = –0.41A
VGS = –2.7V, ID = 0.25A
VGS = –4.5V, ID = –0.41A ,TJ = 125°C
Q2
0.87
1.20
1.22
1.1
1.5
1.9
gFS Forward Transconductance VDS = 5V, ID = 0.75A
VDS = –5V, ID = –0.41A
Q1
Q2
3
8S
Dynamic Characteristics
Ciss Input Capacitance Q1
VDS = 10V, VGS = 0V, f= 1MHZ
Q2
VDS = –10V, VGS = 0V, f= 1MHZ
Q1
Q2 90
70
120
100 pF
Coss Output Capacitance Q1
Q2
20
30
30
40 pF
Crss Reverse Transfer Capacitance Q1
Q2
15
15
25
25 pF
Switching Characteristics
td(on) Turn-On Delay Time Q1
VDD = 5V, ID = 0.5A,
VGS = 4.5V,RGEN = 6Ω
Q2
VDD = –5V, ID = –0.5A,
VGS = –4.5V,RGEN = 6Ω
Q1
Q2 4
6
10
12 ns
trRise Time Q1
Q2 1
16
10
29 ns
td(off) Turn-Off Delay Time Q1
Q2 9
35
18
56 ns
tfFall Time Q1
Q2 1
40
10
64 ns
QgTotal Gate Charge Q1
VGS =4.5V, VDD = 5V, ID = 0.75A
Q2
VGS = –4.5V, VDD = –5V, ID = –0.41A
Q1
Q2
1.03
1.20
1.44
1.68 nC
Qgs Gate to Source Charge Q1
Q2 0.29
0.31 nC
Qgd Gate to Drain “Miller” Charge Q1
Q2 0.17
0.22 nC
(note 2)
FDG8842CZ Complementary PowerTrench® MOSFET
www.fairchildsemi.com
3
©2007 Fairchild Semiconductor Corporation
FDG8842CZ Rev.B
Electrical Characteristics TJ = 25°C unless otherwise noted
Drain-Source Diode Characteristics and Maximum Ratings
Symbol Parameter Test Conditions Type Min Typ Max Units
ISMaximum Continuous Drain-Source Diode Forward Current Q1
Q2
0.3
–0.3 A
VSD Source to Drain Diode Forward Voltage VGS = 0V, IS = 0.3A (Note 2)
VGS = 0V, IS = –0.3A (Note 2)
Q1
Q2 0.76
–0.84
1.2
–1.2 V
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins.
RθJC is guaranteed by design while RθJA is determined by the user's board design.
2. Pulse Test: Pulse Width < 300μs, Duty cycle < 2.0%.
a. 350°C/W when mounted on a
1 in2 pad of 2 oz copper . b. 415°C/W when mounted on a minimum pad
of 2 oz copper.
Scale 1:1 on letter size paper.
FDG8842CZ Complementary PowerTrench® MOSFET
www.fairchildsemi.com
4
©2007 Fairchild Semiconductor Corporation
FDG8842CZ Rev.B
Typical Characteristics (Q1 N-Channel)TJ = 25°C unless otherwise noted
Figure 1.
0.0 0.5 1.0 1.5 2.0
0.00
0.44
0.88
1.32
1.76
2.20
VGS = 1.5V
VGS = 2.0V
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
VGS = 2.7V
VGS =1.8V
VGS = 4.5V
ID, DRAIN CURRENT (A)
VDS, DRAIN TO SOURCE VOLTAGE (V)
On-Region Characteristics Figure 2.
0.00 0.44 0.88 1.32 1.76 2.20
0.6
1.0
1.4
1.8
2.2
2.6
VGS = 4.5V
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
ID, DRAIN CURRENT(A)
VGS = 2.7V
VGS = 2.0V
VGS = 1.8V
VGS = 3.5V
N o r m a l i z e d O n - R e s i s t a n c e
vs Drain Current and Gate Voltage
F i g u r e 3 . N o r m a l i z e d O n - R e s i s t a n c e
-50 -25 0 25 50 75 100 125 150
0.6
0.8
1.0
1.2
1.4
1.6
ID = 0.75A
VGS = 4.5V
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
TJ, JUNCTION TEMPERATURE (oC)
vs Junction Temperature
Figure 4.
12345
0.2
0.4
0.6
0.8
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
TJ = 125oC
TJ = 25oC
ID =0.38A
rDS(on), DRAIN TO
SOURCE ON-RESISTANCE (Ω)
VGS, GATE TO SOURCE VOLTAGE (V)
O n -R es i st a nc e vs G at e to
Source Voltage
Figure 5. Transfer Characteristics
0.0 0.5 1.0 1.5 2.0 2.5
0.00
0.44
0.88
1.32
1.76
2.20
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
TJ = -55oC
TJ = 25oC
TJ = 150oC
ID, DRAIN CURRENT (A)
VGS, GATE TO SOURCE VOLTAGE (V)
VDD = 5V
Figure 6.
0.2 0.4 0.6 0.8 1.0 1.2
0.001
0.01
0.1
1
2
TJ = -55oC
TJ = 25oC
TJ = 150oC
VGS = 0V
IS, REVERSE DRAIN CURRENT (A)
VSD, BODY DIODE FORWARD VOLTAGE (V)
S ou r ce t o D r ai n Di o de
Forward Voltage vs Source Current
FDG8842CZ Complementary PowerTrench® MOSFET
www.fairchildsemi.com
5
©2007 Fairchild Semiconductor Corporation
FDG8842CZ Rev.B
Figure 7.
0.00.20.40.60.81.01.21.4
0
1
2
3
4
5
VDD = 10V
VDD = 15V
VGS, GATE TO SOURCE VOLTAGE(V)
Qg, GATE CHARGE(nC)
VDD = 5V
ID = 0.22A
Gate Charge Characteristics Figure 8.
0.1 1 10
1
10
100
200
f = 1MHz
VGS = 0V
CAPACITANCE (pF)
VDS, DRAIN TO SOURCE VOLTAGE (V)
Crss
Coss
Ciss
30
C a p a c i t a n c e v s D r a i n
to Source Voltage
Figure 9.
0.1 1 10 100
0.01
0.1
1
0.005
4
100μs
1ms
1s
DC
100ms
10ms
SINGLE PULSE
TJ = MAX RATED
RθJA = 415OC/W
TA = 25OC
ID, DRAIN CURRENT (A)
VDS, DRAIN to SOURCE VOLTAGE (V)
rDS(on)
LIMITED
F or w ar d Bi a s S af e
Operating Area
Figure 10.
0.0001 0.001 0.01 0.1 1 10 100 1000
0.1
1
10
RθJA = 415OC/W
SINGLE PULSE
TA = 25OC
50
P(PK), PEAK TRANSIENT POWER (W)
t, PULSE WIDTH (s)
Single Pulse Maximum Power
Dissipation
Figure 11. Transient Thermal Response Curve
0.0001 0.001 0.01 0.1 1 10 100 1000
0.01
0.1
1
RθJA = 415oC/W
DUTY CYCLE-DESCENDING ORDER
NORMALIZED THERMAL
IMPEDANCE, ZθJA
t, RECTANGULAR PULSE DURATION (s)
D = 0.5
0.2
0.1
0.05
0.02
0.01
SINGLE PULSE
PDM
t1
t2
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + TA
Typical Characteristics (Q1 N-Channel)TJ = 25°C unless otherwise noted
FDG8842CZ Complementary PowerTrench® MOSFET
www.fairchildsemi.com
6
©2007 Fairchild Semiconductor Corporation
FDG8842CZ Rev.B
Typical Characteristics (Q2 P-Channel)
01234
0.0
0.3
0.6
0.9
1.2
VGS = -2.0V
VGS = -4.5V
VGS = -2.7V
VGS = -1.5V
VGS = -2.5V
VGS = -3.5V
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
-ID, DRAIN CURRENT (A)
-VDS, DRAIN TO SOURCE VOLTAGE (V)
Figure 13. On Region Characteristics
0.0 0.3 0.6 0.9 1.2
0
1
2
3
4
5
VGS = -3.5V
VGS = -4.5V
VGS = -1.5V
VGS = -2.5V
VGS = -2.0V
VGS = -2.7V
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
-ID, DRAIN CURRENT(A)
Figure 14. Normalized on-Resistance vs Drain
Current and Gate Voltage
Figure 15. Normalized On Resistance
vs Junction Temperature
-50 -25 0 25 50 75 100 125 150
0.6
0.8
1.0
1.2
1.4
1.6
ID = -0.41A
VGS = -4.5V
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
TJ, JUNCTION TEMPERATURE (oC)
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0
1
2
3
4
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
TJ = 125oC
TJ = 25oC
ID =-0.22A
rDS(on), DRAIN TO
SOURCE ON-RESISTANCE (Ω)
-VGS, GATE TO SOURCE VOLTAGE (V)
Figure 16. On-Resistance vs Gate to
Source Voltage
Figure 17. Transfer Characteristics
0.5 1.0 1.5 2.0 2.5
0.0
0.2
0.4
0.6
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
TJ = -55oC
TJ = 25oC
TJ = 150oC
-ID, DRAIN CURRENT (A)
-VGS, GATE TO SOURCE VOLTAGE (V)
VDS = -5V
Figure 18. Source to Drain Diode
Forward Voltage vs Source Current
0.2 0.4 0.6 0.8 1.0 1.2
0.001
0.01
0.1
1
3
TJ = -55oC
TJ = 25oC
TJ = 150oC
VGS = 0V
-IS, REVERSE DRAIN CURRENT (A)
-VSD, BODY DIODE FORWARD VOLTAGE (V)
TJ = 25°C unless otherwise noted
Typical Characteristics(Q2 P-Channel) TJ = 25°C unless otherwise noted
Figure 19. Gate Charge Characteristics
0.0 0.4 0.8 1.2 1.6
0
1
2
3
4
5
VDD = -10V
VDD = -15V
-VGS, GATE TO SOURCE VOLTAGE(V)
Qg, GATE CHARGE(nC)
VDD = -5V
ID = -0.41A
0.1 1 10
1
10
100
200
f = 1MHz
VGS = 0V
CAPACITANCE (pF)
-VDS, DRAIN TO SOURCE VOLTAGE (V)
Crss
Coss
Ciss
25
Figure 20. Capacitance vs Drain
to Source Voltage
F i g u r e 2 1 . F o r w a r d B i a s S a f e
Operating Area
110
0.01
0.1
1
0.3 50
3
1ms
1s
DC
100ms
10ms
SINGLE PULSE
TJ = MAX RATED
RθJA = 415oC/W
TA = 25oC
-ID, DRAIN CURRENT (A)
-VDS, DRAIN to SOURCE VOLTAGE (V)
rDS(on)
LIMITED
Figure 22. Single Pulse Maximum Power
Dissipation
0.001 0.01 0.1 1 10 100 1000
0.1
1
10
P(PK), PEAK TRANSIENT POWER (W)
TA = 25OC
RθJA = 415OC/W
SINGLE PULSE
20
t, PULSE WIDTH (s)
Figure 23. Transient Thermal Response Curve
10-3 10-2 10-1 100101102103
0.01
0.1
1
RθJA = 415oC/W
DUTY CYCLE-DESCENDING ORDER
NORMALIZED THERMAL
IMPEDANCE, ZθJA
t, RECTANGULAR PULSE DURATION (s)
D = 0.5
0.2
0.1
0.05
0.02
0.01
SINGLE PULSE
PDM
t1
t2
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + TA
FDG8842CZ Complementary PowerTrench® MOSFET
www.fairchildsemi.com
7
©2007 Fairchild Semiconductor Corporation
FDG8842CZ Rev.B
FDG8842CZ Complementary PowerTrench® MOSFET
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO
IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE
OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE
RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS,
SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT
THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body or (b)
support or sustain life, and (c) whose failure to perform when
properly used in accordance with instructions for use provided in
the labeling, can be reasonably expected to result in a significant
injury of the user.
2. A critical component in any component of a life support,
device, or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
ACEx®
Across the board. Around the world™
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT
CTL™
Current Transfer Logic™
DOME™
E2CMOS™
EcoSPARK®
EnSigna™
FACT Quiet Series™
FACT®
FAST®
FASTr™
FPS™
FRFET®
GlobalOptoisolator
GTO
i-Lo
ImpliedDisconnect™
IntelliMAX™
ISOPLANAR™
MICROCOUPLER™
MicroPak™
MICROWIRE™
Motion-SPM™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR®
PACMAN™
PDP-SPM™
POP™
Power220®
Power247®
PowerEdge™
PowerSaver™
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
ScalarPump™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyWire™
TruTranslation™
µSerDes™
UHC®
UniFET™
VCX™
Wire™
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for product
development. Specifications may change in any manner
without notice.
Preliminary First Production This datasheet contains preliminary data; supplementary data will
be published at a later date. Fairchild Semiconductor reserves the
right to make changes at any time without notice to improve
design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at any time
without notice to improve design.
Obsolete Not In Production This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor.The datasheet is printed
for reference information only.
Rev. I26
tm
tm
HiSeC
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC