Document Number: 83651 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com
Rev. 1.9, 24-May-11 1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, Dual Channel
ILD610
Vishay Semiconductors
DESCRIPTION
The ILD610 series is a dual channel optocoupler series for
high density applications. Each channel consists of an
optically coupled pair with a gallium arsenide infrared LED
and silicon NPN phototransistor. Signal information,
including a DC level, can be transmitted by the device while
maintaining a high degree of electrical isolation between
input and output. The ILD610 series is the dual version of
SFH610 series and uses a repetitive pin-out configuration
instead of the more common alternating pin-out used in
most dual couplers.
FEATURES
• Dual version of SFH610 series
• Isolation test voltage, 5300 VRMS
•V
CEsat 0.25 ( 0.4) V at IF = 10 mA, IC = 2.5 mA
•V
CEO = 70 V
• Compliant to RoHS Directive 2002/95/EC and
in accordance to WEEE 2002/96/EC
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• DIN EN 60747-5-5 (VDE 0884)/DIN EN 60747-5-5 pending
• CSA 93751
• BSI IEC 60950; IEC 60065
Note
• Additional options may be possible, please contact sales office.
8
7
6
5
E
C
E
C
A
C
A
C
1
2
3
4
i179073_7
ORDERING INFORMATION
ILD610-#X00#T
PART NUMBER CTR
BIN
PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, CSA, BSI 40 to 80 63 to 125 100 to 200 160 to 320
DIP-8 ILD610-1 - ILD610-3 -
DIP-8, 400 mil, option 6 - - ILD610-3X006 -
SMD-8, option 7 - ILD610-2X007T - -
SMD-8, option 9 - - ILD610-3X009 ILD610-4X009
> 0.1 mm
10.16 mm
> 0.7 mm
7.62 mm
DIP-#
Option 7
Option 6
Option 9
www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83651
2Rev. 1.9, 24-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ILD610
Vishay Semiconductors Optocoupler, Phototransistor Output, Dual
Channel
Note
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage VR6.0 V
Surge forward current t 1.0 ms IFSM 1.5 A
Power dissipation Pdiss 100 mW
Derate linearly from 25 °C 1.3 mW/°C
Forward continuous current IF60 mA
OUTPUT
Collector emitter voltage VCE 70 V
Collector current IC50 mA
t 1.0 ms IC100 mA
Power dissipation Pdiss 150 mW
Derate linearly from 25 °C 2.0 mW/°C
COUPLER
Isolation test voltage t = 1.0 s VISO 5300 VRMS
Isolation resistance VIO = 500 V, Tamb = 25 °C RIO 1012
VIO = 500 V, Tamb = 100 °C RIO 1011
Storage temperature Tstg - 55 to + 150 °C
Operating temperature Tamb - 55 to + 100 °C
Junction temperature Tj100 °C
Lead soldering time at 260 °C 10 s
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 60 mA VF1.25 1.65 V
Reverse current VR = 6.0 V IR0.01 10 μA
Capacitance VR = 0 V, f = 1.0 MHz CO25 pF
OUTPUT
Collector emitter breakdown
voltage IC = 10 mA, IE = 10 μA BVCEO 70 90 V
BVCEO 6.0 7.0 V
Collector emitter dark current VCE = 10 V ICEO 2.0 50 nA
Collector emitter capacitance VCE = 5.0 V, f = 1.0 MHz CCE 7.0 pF
Collector emitter leakage
current VCE = 10 V
ILD610-1 ICEO 2.0 50 nA
ILD610-2 ICEO 2.0 50 nA
ILD610-3 ICEO 5.0 100 nA
ILD610-4 ICEO 5.0 100 nA
COUPLER
Collector emitter saturation
voltage IF = 10 mA, IC = 2.5 mA VCEsat 0.25 0.40 V
Coupling capacitance CC0.35 pF
Document Number: 83651 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com
Rev. 1.9, 24-May-11 3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ILD610
Optocoupler, Phototransistor Output, Dual
Channel Vishay Semiconductors
Note
(1) CTR will match within a ratio of 1.7:1
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
CTR (1)
IF = 10 mA, VCE = 5.0 V
ILD610-1 CTR 40 80 %
ILD610-2 CTR 63 125 %
ILD610-3 CTR 100 200 %
ILD610-4 CTR 160 320 %
IF = 1.0 mA, VCE = 5.0 V
ILD610-1 CTR 13 %
ILD610-2 CTR 22 %
ILD610-3 CTR 34 %
ILD610-4 CTR 56 %
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
NON-SATURATED
Rise time VCC = 5.0 V, RL = 75 ,
IF = 10 mA
ILD610-1
tr
2.0
μs
ILD610-2 2.5
ILD610-3 2.9
ILD610-4 3.3
Fall time VCC = 5.0 V, RL = 75 ,
IF = 10 mA
ILD610-1
tf
2.0
μs
ILD610-2 2.6
ILD610-3 3.1
ILD610-4 3.5
Turn-on time VCC = 5.0 V, RL = 75 ,
IF = 10 mA
ILD610-1
ton
3.0
μs
ILD610-2 3.2
ILD610-3 3.6
ILD610-4 4.1
Turn-off time VCC = 5.0 V, RL = 75 ,
IF = 10 mA
ILD610-1
toff
2.9
μs
ILD610-2 3.4
ILD610-3 3.7
ILD610-4 4.1
SATURATED
Rise time
VCC = 5.0 V, RL = 1.0 k, IF = 20 mA ILD610-1
tr
2.0
μs
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-2 2.8
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-3 2.8
VCC = 5.0 V, RL = 1.0 k, IF = 5 mA ILD610-4 4.6
Fall time
VCC = 5.0 V, RL = 1.0 k, IF = 20 mA ILD610-1
tf
11
μs
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-2 14
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-3 14
VCC = 5.0 V, RL = 1.0 k, IF = 5 mA ILD610-4 15
Turn-on time
VCC = 5.0 V, RL = 1.0 k, IF = 20 mA ILD610-1
ton
3.0
μs
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-2 4.3
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-3 4.3
VCC = 5.0 V, RL = 1.0 k, IF = 5 mA ILD610-4 6.0
Turn-off time
VCC = 5.0 V, RL = 1.0 k, IF = 20 mA ILD610-1
toff
18
μs
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-2 25
VCC = 5.0 V, RL = 1.0 k, IF = 10 mA ILD610-3 25
VCC = 5.0 V, RL = 1.0 k, IF = 5 mA ILD610-4 25
www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83651
4Rev. 1.9, 24-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ILD610
Vishay Semiconductors Optocoupler, Phototransistor Output, Dual
Channel
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward Voltage vs. Forward Current
Fig. 2 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Fig. 3 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Fig. 4 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Fig. 5 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Fig. 6 - Collector Emitter Current vs. Temperature and LED Current
iilct6_01
IF
- Forward Current (mA)
1001010.1
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
VF - Forward Voltage (V)
T
amb
= 25 °C
T
amb
= 85 °C
T
amb
= - 55 °C
iilct6_02
1001010.1
0.0
0.5
1.0
1.5
NCTR(SAT)
NCTR
I
F
- LED Current (mA)
NCTR - Normalized CTR
Normalized to:
VCE = 10 V, IF= 10 mA
T
amb = 25 °C
CTRCE(sat) VCE = 0.4 V
iilct6_03
1001010.1
0.0
0.5
1.0
1.5
NCTR(SAT)
NCTR
I
F
- LED Current (mA)
NCTR - Normalized CTR
Normalized to:
VCE = 10 V, IF= 10 mA,T
A= 25 °C
T
A= 50 °C
CTRCE(sat) VCE = 0.4 V
iilct6_04
1001010.1
0.0
0.5
1.0
1.5
I
F
- LED Current (mA)
NCTR(SAT)
NCTR
Normalized to:
VCE = 10 V, IF= 10 mA
Tamb = 25 °C
CTRCE(sat) VCE = 0.4 V
Tamb = 70 °C
NCTR - Normalized CTR
iilct6_05
0.1 1 10 100
1.5
1.0
0.5
0.0
I
F
- LED Current (mA)
NCTR - Normalized CTR
NCTR(SAT)
NCTR
Normalized to:
V
CE
= 10 V, I
F
= 10 mA, T
amb
= 25 °C
CTR
CE(sat)
V
CE
= 0.4 V
T
amb
= 85 °C
iilct6_06
60503020100
0
5
10
15
20
25
30
35
50 °C
70 °C
85 °C
I
F
- LED Current (mA)
I
CE
- Collector Current (mA)
25 °C
40
Document Number: 83651 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com
Rev. 1.9, 24-May-11 5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ILD610
Optocoupler, Phototransistor Output, Dual
Channel Vishay Semiconductors
Fig. 7 - Collector Emitter Leakage Current vs.Temperature
Fig. 8 - Propagation Delay vs. Collector Load Resistor
Fig. 9 - Switching Timing
Fig. 10 - Non-Saturated Switching Schematic
Fig. 11 - Saturated Switching Time Test Waveform
iilct6_07
1008060
40200- 20
10
10
10
10
10
10
10
10
- 2
- 1
0
1
2
3
4
5
T
amb
- Ambient Temperature (°C)
I
CEO
- Collector Emitter (nA)
Vce = 10 V
Typical
iilct6_08
RL- Collector Load Resistor (kΩ)
1001010.1
1
10
100
1000
1.0
1.5
2.0
2.5
t
pLH
t
pHL
tpLH - Propagation (µs)
tpHL - Propagation Delay (µs)
T
amb
= 25 °C, I
F
= 10 mA
V
CC
= 5 V, V
th
= 1.5 V
iild610_10
VO
VCC = 5 V
RL
f = 10 kHz,
DF = 50 %
IF= 10 mA
t
off
t
r
10 %
50 %
90 %
t
s
t
pdoff
t
pdon
t
on
t
r
t
d
Output
Input
10 %
50 %
90 %
iild610_11
www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83651
6Rev. 1.9, 24-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ILD610
Vishay Semiconductors Optocoupler, Phototransistor Output, Dual
Channel
PACKAGE DIMENSIONS in millimeters
PACKAGE MARKING
Notes
• Only option 1 and 7 reflected in the package marking
• Tape and reel suffix (T) is not part of the package marking
i178006
Pin one ID
6.645 ± 0.165
9.77 ± 0.14
0.95 ± 0.19
4° typ.
2.54 typ.
10°
3° to 9°
7.62 typ.
0.51 ± 0.05
0.25 ± 0.05
3.045 ± 0.255
3.555 ± 0.255
0.70 ± 0.19
6.095 ± 0.255
4321
0.79
1.27
567 8 ISO method A
18450-6
8 min.
0.51
1.02
7.62 ref.
9.53
10.03
0.25 typ.
0.102
0.249
15° max.
Option 9
0.35
0.25
10.16
10.92
7.8
7.4
10.36
9.96
Option 6
8 min.
7.62 typ.
4.6
4.1
8.4 min.
10.3 max.
0.7
Option 7
2.54 R 0.25
1.78
0.76
1.52
8 min.
11.05
2.54 R 0.25
1.78
0.76
1.52
8 min.
11.05
ILD610
V WWY H 68
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
ILD610-2 ILD610-2X007T ILD610-3X001 ILD610-4 ILD610-1 ILD610-3X006 ILD610-3