To our custo mers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corpor ation took over all the business of both
companies. Therefore, althoug h the old com pany name remains in this docum ent, it is a valid
Renesas Electronics document. W e appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Ren esas E lectronics assumes no liability whatsoever for any da mages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified acco rding to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, et c.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electro nic app liances; machine tool s; p ersonal electron ic equipment; and indu strial robots .
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equ i pment; submersible repeaters; nu clear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
interven tion (e.g. excision, et c.), and any oth er applications or purposes that pose a direct th reat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific chara cterist ics such as the o ccurren ce of failure at a certai n rate an d malfunct ion s under certai n u se cond ition s. Further,
Renesas Electronics pr oducts are not subject to radiation resi stance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for det ai ls as to enviro nmental matters such as the en vi ronmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as us ed in this document means Renesas Electronics Corporation and also includes its majo ri ty-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
REJ03G0456-0300 Rev.3.00 Nov 30, 2007
Page 1 of 7
BCR12CM-12LB
Triac
Medium Power Use
(The product guaranteed maximum junction temperature of 150°C)
REJ03G0456-0300
Rev.3.00
Nov 30, 2007
Features
• IT (RMS) : 12 A
• VDRM : 600 V
• IFGTI, IRGTI, IRGT III : 30 mA (20 mA)Note6
• Non-Insulated Type
• Planar Passivation Type
Outline
2, 4
1
3
1. T
1
Terminal
2. T
2
Terminal
3. Gate Terminal
4. T
2
Terminal
123
4
RENESAS Package code: PRSS0004AA-A
(Package name: TO-220)
Applications
Contactless AC switch, light dimmer, electronic flasher unit, control of household equipment such as TV sets, stereo
systems, refrigerator, washing machine, infrared kotatsu, carpet, electric fan, and solenoid driver, small motor control,
copying machine, electric tool, electric heater control, and other general purpose control applications
Warning
1. Refer to the recommended circuit value s around the triac before using.
2. Be sure to exchange the specification before using. Otherwise, g eneral triacs with the maximum
junction temperature of 125°C will be supplied.
Maximum Ratings
Voltage class
Parameter Symbol
12 Unit
Repetitive peak off-state voltageNote1 V
DRM 600 V
Non-repetitive peak off-state voltageNote1 V
DSM 720 V
BCR12CM-12LB (The product guaranteed maximum junction temperature of 150°C)
REJ03G0456-0300 Rev.3.00 Nov 30, 2007
Page 2 of 7
Parameter Symbol Ratings Unit Conditions
RMS on-state current IT (RMS) 12 A
Commercial frequency, sine full wave
360° conduction, Tc = 123°CNote3
Surge on-state current ITSM 120 A
60Hz sinewave 1 full cycle, peak value,
non-repetitive
I2t for fusing I2t 60 A2s Value corresponding to 1 cycle of half
wave 60Hz, surge on-state current
Peak gate power dissipation PGM 5 W
Average gate power dissipation PG (AV) 0.5 W
Peak gate voltage VGM 10 V
Peak gate current IGM 2 A
Junction temperature Tj – 40 to +150 °C
Storage temperature Tstg – 40 to +150 °C
Weight — 2.0 g Typical value
Notes: 1. Gate open.
Electrical Characteristics
Parameter Symbol Min. Typ. Max. Unit Test conditions
Repetitive peak off-state current IDRM — — 2.0 mA Tj = 150°C, VDRM applied
On-state voltage VTM — — 1.6 V
Tc = 25°C, ITM = 20 A,
Instantaneous measurement
Ι V
FGTΙ — — 1.5 V
ΙΙ V
RGTΙ — — 1.5 V
Gate trigger voltageNote2
ΙΙΙ V
RGTΙΙΙ — — 1.5 V
Tj = 25°C, VD = 6 V, RL = 6 Ω,
RG = 330 Ω
Ι I
FGTΙ — — 30Note6 mA
ΙΙ I
RGTΙ — — 30Note6 mA
Gate trigger currentNote2
ΙΙΙ I
RGTΙΙΙ — — 30Note6 mA
Tj = 25°C, VD = 6 V, RL = 6 Ω,
RG = 330 Ω
Gate non-trigger voltage VGD 0.2/0.1 — — V Tj = 125°C / 150°C,
VD = 1/2 VDRM
Thermal resistance Rth (j-c) — — 1.8 °C/W Junction to caseNote3 Note4
Critical-rate of rise of off-state
commutating voltageNote5 (dv/dt)c 10/1 — — V/µs Tj = 125°C/150°C
Notes: 2. Measurement using the gate trigger charact eristics measurement circuit.
3. Case temperature is measured at the T2 tab 1.5 mm away from the molded case.
4. The contact thermal resistance Rth (c-f) in case of greasing is 1.0°C/W.
5. Test conditions of the critical-rate of rise of off-state commutating voltage is sho wn in the table below.
6. High sensitivity (IGT ≤ 20 mA) is also available. (IGT item: 1)
Test conditions Commutating voltage and current waveforms
(inductive load)
1. Junction temperature
Tj = 125°C/150°C
2. Rate of decay of on-state commutating current
(di/dt)c = – 6.0 A/ms
3. Peak off-state voltage
VD = 400 V
Supply Voltage
Time
Time
Time
Main Current
Main Voltage
(di/dt)c
V
D
(dv/dt)c
BCR12CM-12LB (The product guaranteed maximum junction temperature of 150°C)
REJ03G0456-0300 Rev.3.00 Nov 30, 2007
Page 3 of 7
Performance Curves
Maximum On-State Characteristics
On-State Voltage (V)
On-State Current (A)
Rated Surge On-State Current
Conduction Time (Cycles at 60Hz)
Surge On-State Current (A)
Gate Characteristics (I, II and III)
Gate Current (mA)
Gate Voltage (V)
Gate Trigger Voltage vs.
Junction Temperature
Junction Temperature (°C)
Gate Trigger Voltage (Tj = t°C)
Gate Trigger Voltage (Tj = 25°C)
×
100 (%)
Gate Trigger Current vs.
Junction Temperature
Junction Temperature (°C)
Gate Trigger Current (Tj = t°C)
Gate Trigger Current (Tj = 25°C)
× 100 (%)
Maximum Transient Thermal Impedance
Characteristics (Junction to case)
Conduction Time (Cycles at 60Hz)
Transient Thermal Impedance (°C/W)
10
0
2510
1
80
40
37 10
2
425374
120
160
200
60
20
100
140
180
0
0.5 1.5 2.5 3.51.0 2 3.0 4.0
10
2
7
5
3
2
10
1
7
5
3
2
10
0
7
5
10
1
10
3
7
5
3
2
10
2
7
5
3
2
4
4
10
1
10
3
7
5
3
2
10
2
7
5
3
2
4
4
2.2
2.4
0
2.0
1.8
1.6
1.4
1.2
0.6
0.4
0.2
0.8
2310
–1
5710
0
23 5710
1
23 5710
2
2310
2
5710
3
1.0
2
10
0
2310
1
5710
2
23 5710
3
23 5710
4
5
3
2
10
1
7
5
3
2
7
5
3
2
10
–1
–60 –20 20 60 100 140–40 0 40 80 120 160
–20–60 20 60 100 140–40 0 40 80 120 160
Tj = 150°C
V
GM
= 10V
P
GM
= 5W
I
GM
= 2A
V
GD
= 0.1V
V
GT
= 1.5V
I
FGT I
, I
RGT III
I
RGT I
P
G(AV)
=
0.5W
Typical Example
I
RGT I
, I
RGT III
I
FGT I
Typical Example
Tj = 25°C
BCR12CM-12LB (The product guaranteed maximum junction temperature of 150°C)
REJ03G0456-0300 Rev.3.00 Nov 30, 2007
Page 4 of 7
On-State Power Dissipation (W)
RMS On-State Current (A)
Maximum On-State Power Dissipation
RMS On-State Current (A)
Case Temperature (°C)
Allowable Case Temperature vs.
RMS On-State Current
RMS On-State Current (A)
Ambient Temperature (°C)
Allowable Ambient Temperature vs.
RMS On-State Current
Junction Temperature (°C)
Repetitive Peak Off-State Current (Tj = t°C)
Repetitive Peak Off-State Current (Tj = 25°C) × 100 (%)
Repetitive Peak Off-State Current vs.
Junction Temperature
Holding Current vs.
Junction Temperature
Junction Temperature (°C)
Holding Current (Tj = t°C)
Holding Current (Tj = 25°C) × 100 (%)
32
24
20
12
4
01682
046101214
8
16
28
160
120
100
60
20
01682
046101214
40
80
140
RMS On-State Current (A)
Ambient Temperature (°C)
Allowable Ambient Temperature vs.
RMS On-State Current
160
120
100
60
20
00
40
80
140
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
160
120
100
60
20
01682
04 6 10 12 14
40
80
140
10
5
7
5
3
2
10
4
7
5
3
2
10
3
7
5
3
2
10
2
–60 –20 20 60 100 140–40 0 40 80 120 160
10
3
7
5
3
2
10
2
7
5
3
2
4
4
10
1
–60 –20 20 60 100 140–40 0 40 80 120 160
360° Conduction
Resistive,
inductive loads
Curves apply regardless
of conduction angle
360° Conduction
Resistive,
inductive loads
Curves apply
regardless of
conduction angle
Resistive, inductive loads
Natural convection
All fins are black painted
aluminum and greased
60 × 60 × t2.3
100 × 100 × t2.3
120 × 120 × t2.3
Typical Example Typical Example
Natural convection
No Fins
Curves apply regardless
of conduction angle
Resistive, inductive loads
BCR12CM-12LB (The product guaranteed maximum junction temperature of 150°C)
REJ03G0456-0300 Rev.3.00 Nov 30, 2007
Page 5 of 7
Breakover Voltage vs.
Junction Temperature
Junction Temperature (°C)
Breakover Voltage (Tj = t°C)
Breakover Voltage (Tj = 25°C) × 100 (%)
Latching Current (mA)
Latching Current vs.
Junction Temperature
Junction Temperature (°C)
160–40 0 40 80 120
10
3
7
5
3
2
10
2
7
5
3
2
10
1
7
5
3
2
10
0
160
100
80
40
20
0
140
60
120
–60 –20 20 60 100 140–40 0 40 80 120 160
Rate of Rise of Off-State Voltage (V/µs)
Breakover Voltage (dv/dt = xV/µs)
Breakover Voltage (dv/dt = 1V/µs) × 100 (%)
Breakover Voltage vs.
Rate of Rise of Off-State Voltage (Tj=150°C)
Commutation Characteristics (Tj=150°C)
Critical Rate of Rise of Off-State
Commutating Voltage (V/µs)
Rate of Decay of On-State
Commutating Current (A/ms)
Rate of Rise of Off-State Voltage (V/µs)
Breakover Voltage (dv/dt = xV/µs)
Breakover Voltage (dv/dt = 1V/µs) × 100 (%)
Breakover Voltage vs.
Rate of Rise of Off-State Voltage (Tj=125°C)
Commutation Characteristics (Tj=125°C)
Critical Rate of Rise of Off-State
Commutating Voltage (V/µs)
Rate of Decay of On-State
Commutating Current (A/ms)
2310
1
5710
2
23 5710
3
23 5710
4
120
0
20
40
60
80
100
140
160
2310
1
5710
2
23 5710
3
23 5710
4
120
0
20
40
60
80
100
140
160
10
2
2310
0
5710
1
23 5710
2
7
5
10
1
7
3
2
7
5
10
0
3
2
10
2
2310
0
5710
1
23 5710
2
7
5
10
1
7
3
2
7
5
10
0
3
2
Distribution
T
2
+, G–
Typical Example
T
2
+, G+
T
2
–, G–Typical Example
Typical Example
III Quadrant
I Quadrant
Typical Example
Tj = 125°C
Typical Example
Tj = 150°C
III Quadrant
I Quadrant
Typical Example
Tj = 125°C
I
T
= 4A
τ = 500µs
V
D
= 200V
f = 3Hz
Main Voltage
Main CurrentI
T
(di/dt)c
τ
V
D
Time
Time
(dv/dt)c
I Quadrant
III Quadrant
Minimum
Characteristics
Value
Main Voltage
Main CurrentI
T
(di/dt)c
τ
V
D
Time
Time
(dv/dt)c
Typical Example
Tj = 150°C
I
T
= 4A
τ = 500µs
V
D
= 200V
f = 3Hz
III Quadrant
I Quadrant
Minimum
Characteristics
Value
BCR12CM-12LB (The product guaranteed maximum junction temperature of 150°C)
REJ03G0456-0300 Rev.3.00 Nov 30, 2007
Page 6 of 7
C1 = 0.1 to 0.47µF
R1 = 47 to 100Ω
C0 = 0.1µF
R0 = 100Ω
Gate Trigger Characteristics Test Circuits Recommended Circuit Values Around The Triac
Test Procedure I
Test Procedure III
Test Procedure II
Gate Trigger Current (tw)
Gate Trigger Current (DC) × 100 (%)
Gate Current Pulse Width (µs)
Gate Trigger Current vs.
Gate Current Pulse Width
10
1
10
3
7
5
3
2
10
0
23 5710
1
10
2
7
5
3
2
23 5710
2
4
4
44
C
1
C
0
R
0
R
1
6Ω
6Ω
6Ω
6V 6V
6V
330Ω330Ω
330Ω
A
V
A
V
A
V
Typical Example
I
RGT III
I
RGT I
I
FGT I
Load
BCR12CM-12LB (The product guaranteed maximum junction temperature of 150°C)
REJ03G0456-0300 Rev.3.00 Nov 30, 2007
Page 7 of 7
Package Dimensions
SC-46 2.0g
MASS[Typ.]
PRSS0004AA-A
RENESAS CodeJEITA Package Code Previous Code
Unit: mm
10.5Max 4.5
1.3
2.542.54
0.8
1.0
φ3.6
2.60.5
4.5Max
12.5Min 16Max
3.8Max
7.0
3.2
Package Name
TO-220
Order Code
Lead form Standard packing Quantity Standard order code Standard order
code example
Straight type Vinyl sack 100 Type name BCR12CM-12LB
Lead form Plastic Magazine (Tube) 50 Type name – Lead forming code BCR12CM-12LB-A8
Note : Please confirm the specification about the s hipping in detail.
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
RENESAS SALES OFFICES
© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2
