1 Contents 1. Product Outline---------------------- 3 2. Absolute Maximum Rating-------------- 3 3. Characteristics --------------------- 4 4. Chromaticity Diagram----------------- 5 5. Typical Characteristic Graph ----------- 6 6. Outline Drawing And Dimension -------- 9 7. Package Structure ------------------ 10 8. Reliability Test Items And Conditions ---- 11 9. Solder Conditions ------------------ 12 10. Taping Dimension ----------------- 13 11. Reel Packing Structure ------------- 14 12. Label Structure ------------------- 15 13. Lot Number --------------------- 15 14. Aluminium Packing Bag ---------- 16 15. Precaution For use ----------------- 17 16. Hazard Substance Analysis ----------- 18 17. Revision History -------------------- 21 2 Product Outline 1) Feature 1. Plastic Molded L/Frame type ( 7.0mm * 7.0mm * t 4.8mm) 1) 2. Beam Angle ( : 55 0 ) 3. High Power / Brightness Chip & Long Time Reliability 2) Applications -. Automotive Interior lamp, Illumination etc. Absolute Maximum Rating -. Operation Forward Current ....................... 700 -. Peak Pulsed Forward Current ................... 800 (Duty 1/10 Pulse Width 10msec) -. Reverse Voltage .................................... 5V -. -. -. -. 2) Thermal Resistance(Rth) .................................... 8 /W LED Junction Temperature ( Tj ) ........ 125 Operating Temperature Range ( Topr ) ........ - 35 85 Storage Temperature Range ( Tstg ) ........... - 40 110 Remarks) 1) Beam Angle is the off axis angle from LED centerline where the luminous intensity is the half of the peak value. 2) Proper thermal managements should be considered into a circuit design. 3 1) Characteristics ( Tj : 25OC ) Electrical Characteristcs Item Rank Symbol Min. Typ. Max. Unit Conditions Forward Voltage S0 VF 3.2 - 4.5 V IF=700 Reverse Voltage - VR 0.5 - 2.0 V IR=10 Chromaticity Coordinate Rank Q R Q0 CCx CCy CCT [K] Condition QA 0.3011 0.3128 0.3178 0.3096 0.3407 0.2864 0.2918 0.3502 6,500~7,000 QB 0.3178 R0 0.325 0.32 0.3096 0.2918 0.2981 0.36 0.3502 6,000~6,500 IF=700 0.3250 0.3428 0.3471 0.3200 0.2981 0.3138 0.3818 0.3600 5,000~6,000 Luminous Flux Rank Symbol F2 C5 G2 v H2 Remarks) 1) Tolerance : VF : 0.1V, Min. Max. 100 120 120 140 140 160 Unit Conditions lm IF=700 v : 10%, CCx CCy : 0.02 * Luminous Flux measuring equipment : CAS140 B 4 Chromaticity Diagram 0.45 CCy 0.43 0.41 0.39 R0 0.37 Q0 0.35 0.33 QB QA 0.31 0.29 0.27 0.25 0.25 0.30 0.35 0.40 CCx Approved Rank VF CIE lm S0 QA, QB F2, G2, H2 5 Typical Characteristics Graph 6 Typical Characteristics Graph 7 Typical Characteristics Graph 8 Outline Drawing and Dimension Circuit Unit:mm Solder Pattern for Surface Mount Cathode Cathode - Heat sink Anode Anode + Remarks) Make sure the heat sink is electrically connected to the Anode. Heat sink is to be soldered, If not, use the heat conductive adhesive 9 Package Structure No Item Material FRAME Copper Frame(Silver plated) PACKAGE Heat-resistant Polymer LED CHIP SiC WIRE Gold Wire RESIN Silicone Resin (with phosphor) ZENER DIODE Si LENS Silicone Resin 10 Reliability Test Items and Conditions 1) Test Items Test Hours/Cycles Sample No 1) 1,000 h 22 If=Max DC1) 1,000 h 22 1) 1,000 h 22 If=Max DC1) 1,000 h 22 High Temperature Storage 110 1,000 h 11 Low Temperature Storage -40 1,000 h 11 Thermal Shock -40 / 120, each 30 min 200 cycles 22 Temperature humidity Cycle On/Off test -40 / 85 , each 20 min, 100 min transfer Power On/off each 5 min, DC 350 100 cycles 22 Reflow (Pb-Free) Peak 2605 for 10sec 3 times 11 3 times ( 5) 5 Test Item Test Conditions Room Temperature life test 25, If=Max DC High Temperature humidity life test 85 , 85 % RH, High Temperature life test 85 , If=Max DC Low Temperature life test -40, ESD(HBM) - R1:10M , R2:1.5K , C:100pF 1) Max. DC current depending on maximum current derating curve. 2) Criteria for Judging the Damage Item Symbol Test Condition Forward Voltage VF Luminous Flux v * USL : Upper Standard Level Limit Min Max IF = 700 - U.S.L.*1.2 IF = 700 L.S.L.*0.5 - LSL : Lower Standard Level 11 Solder Conditions Reflow Frequency : 2 times max. Peak Temp. : 2605, MAX Max.. 10sec 10sec Time above 200 220 : Max. Max. 40sec 60sec Preheating: 150~180 Max. 60sec Max. Temp. Gradient in Cooling : -5/sec 2) For Manual Soldering Not more than 5 seconds @MAX300, under soldering iron. 12 Taping Dimension Unit : mm 1. Carrier Tape Cathode Anode 2. Reel Symbol Dimension(mm) A 330 B 1 80 1 C 25 0.5 W1 13 0.3 W2 29.5 1 (1) Quantity : 1,000 Pcs / 13" Reel. (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be 0.2 (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package 13 Reel Packing Structure LEVEL 1) Reel 2a S0QAG2 SLHNNWH531T0S0QRC5 S0QAG2 XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII xxxxxxxxxx / xxxx / xxxxpcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII 2) Aluminum Vinyl Bag S0QAG2 SLHNNWH531T0S0QRC5 S0QAG2 XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII xxxxxxxxxx / xxxx / xxxxpcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII . 3) Inner Box Material : Paper(SW3B(B)) TYPE SIZE(mm) 13inch 335 45 335 S0QAG2 SLHNNWH531T0S0QRC5 S0QAG2 XXXX HP LED IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII xxxxxxxxxx / xxxx / xxxxpcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII . 14 4) Carton Box Material : Paper(SW3B(B)) TYPE SIZE(mm) 13inch 350 350 350 S0QAG2 SLHNNWH531T0S0QRC5 S0QAG2 XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII HP LED xxxxxxxxxx / xxxx / xxxxpcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII . [BOX Label] Label Structure S0QAG2 SLHNNWH531T0S0QRC5 S0QAG2 XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII xxxxxxxxxx / xxxx / xxxxpcs (S0): VF Rank (QA): Chromaticity Coordinate Rank(CCT) (G2): Luminous Flux IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Lot Number The Lot number is composed of the following characters / I / 1000PCS : Production Site (S:SEMCO, G:Gosin China) : L (LED) : Product State (A:Normality, B: Bulk, C:First Production, R:reproduction, S:Sample) : Year (Q:2006, R:2007, S:2008...) : Month (1 ~ 9, A, B, C) : Day (1 ~ 9, A, B ~ V) : SEMCo. Product number (1 ~ 999) : Reel Number (1 ~ 999) 15 S0QAG2 SLHNNWH531T0S0QRC5 S0QAG2 XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII xxxxxxxxxx / xxxx / xxxxpcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII . Silical gel & Humidity Indicator Card in Aluminum Vinyl Bag 16 Precaution for Use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from SEMCO, they should be packed by a sealed container with nitrogen gas injected. (Shelf life of sealed bags : 12 months, temp. 0~40, 20~70%RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 168 hours (7 days) at an assembly line with a condition of no more than 30/60%RH, b. Stored at <10% RH. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading is >60% at 235. 8) Devices must be baked for 24hours at 655, if baking is required. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 17 Hazard Substance Analysis 18 19 20 Revision History (Model:SLHNNWH531T0S0QRC5) Date Revision History 2008. 08. 19 Initial Approval Author Drawn Approved K.T. Kim S.J. Hong 21