SQ. (TYP)
NOTES
1. Derate power dissipation linearly 1.67 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as
cleaning agents.
4. Soldering iron tip 1/16”(1.6mm) from housing.
FEATURES
• No contact switching
• 5mm wide slot
• 0.5 mm aperture width
• Opaque black plastic housing
• Locating knobs on housing base
for accurate mounting
• Transistor Output
SCHEMATIC
NOTES:
1. Dimensions for all drawings are in inches (millimeters).
2. Tolerance of ± .010 (.25) on all non-nominal dimensions
unless otherwise specified.
PACKAGE DIMENSIONS
PHOTOTRANSISTOR OPTICAL
INTERRUPTER SWITCH
Parameter Symbol Rating Units
Operating Temperature TOPR -55 to +100 °C
Storage Temperature TSTG -55 to +100 °C
Soldering Temperature (Iron)(2,3,4) TSOL-I 240 for 5 sec °C
Soldering Temperature (Flow)(2,3) TSOL-F 260 for 10 sec °C
EMITTER
Continuous Forward Current IF 60 mA
Reverse Voltage VR 6 V
Power Dissipation(1) PD 150 mW
SENSOR
Collector-Emitter Voltage VCEO 30 V
Emitter-Collector Voltage VECO 4.5 V
Collector Current IC 20 mA
Power Dissipation(1) PD 150 mW
ABSOLUTE MAXIMUM RATINGS (TA= 25°C unless otherwise specified)
2001 Fairchild Semiconductor Corporation
DS300257 1/3/02 1 OF 4 www.fairchildsemi.com
QVE00832