© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-2 E-Mail: sales@glenair.com
MWEB Series EdgeBoard Connectors
Industry-Standard, Approved for Airborne Computers
MWEB EdgeBoard connectors meet the requirements of
MIL-DTL-55302/120 thru /123. Available with 128 or 184
contacts.
Rugged Aluminum Shell and TwistPin Contacts
MWEB connectors share the same design and
construction as the Glenair Micro-D M83513 connector.
Backplane, Daughtercard and Wired
Vertical mount thru-hole motherboard connectors
and straddle mount daughtercard connectors are
complemented by right angle thru-hole and pre-wired I/O
versions.
Rugged Mil Spec Performance in a High-Density Backplane
Connector System: The MWEB EdgeBoard
Featuring a width of only ¼ inch (6.4 mm.),
MWEB Series connectors provide high-
density in a rugged metal shell connector.
Contacts are rated at 3 amps, and the DWV
voltage rating is 300 volts AC RMS at 70,000
feet altitude. The two row, .050 inch (1.54
mm.) spacing is made possible by using
TwistPin reverse gender contacts. Insert-
molded LCP insulators are resistant to heat
and chemicals. Contacts are beryllium copper
with fi fty microinches of gold plating. Shells
are machined aluminum alloy. Hexagonal
polarizing keys allow up to 36 keying options.
PC Board
Contact Tail
.019” (0.49) Diameter Copper
Wire, Solder Dipped
Contact Tail
.019” (0.49) Diameter Copper
Wire, Gold Plated
Rigid Epoxy Potting
Compound
Rigid Epoxy Potting
Compound
Liquid Crystal Polymer
Dielectric
Liquid Crystal Polymer
Dielectric
Micro
Socket
Contact
TwistPin
Contact
Aluminum Shell, Electroless
Nickel Plated
Aluminum Shell, Electroless
Nickel Plated
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-3 E-Mail: sales@glenair.com
N
MWEB-128P BACKPLANE THRU-HOLE CONNECTOR
Part Number MWEB2L-128P5W4-.375
MWEB Series EdgeBoard Connectors
MWEB-128P Vertical Mount Backplane Connector
3.950 ± .015
(100.33 ± 0.38)
.050 (1.27) TYP.
3.700 (93.98)
3.318 ± .003
(84.28 ± 0.08)
.191
.265 (6.73)
MAX.
PIN # B1
PIN # A1
PIN # A64
PIN # B64 .050 (1.27)
.277/.263
(7.04/6.68) .40 (10.1)
± .010 (0.25)
.190/.180
(4.83/4.57)
B EVEN
A EVEN B ODD
A ODD
.300/.250
(7.62/6.35)
.375/.325
(9.52/8.26) .075
(1.91)
Ø .017/.021
(0.43/0.53)
Ø .091/.098
(2.31/2.49)
DIA 2 PLACES
B1
B64
A64 A1
3.700 (93.98)
.275 (6.99)
.0375 (0.96)
.075 (1.91)
.075 (1.91)
.075
(1.91)
63 EQUAL SPACES
AT .050 (1.27)
(TYP)
A5 A3 A1
A2
A4
B5
B4 B2
B3 B1
2X Ø .096 (2.44) 128 X
Ø .040 PTH
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-4 E-Mail: sales@glenair.com
MWEB-128S STRADDLE MOUNT CARDEDGE CONNECTOR
Part Number MWEB2L-128S4BS3
MWEB Series EdgeBoard Connectors
MWEB-128S Straddle Mount Cardedge Connector
3.950 ± .015
(100.33 ± 0.38)
3.700 (93.98)
3.41 ± .010
(86.61 ± 0.25)
.191
.265 (6.73)
MAX.
PIN # A1
PIN # B1
PIN # B64
PIN # A64 .050 (1.27) TYP. .050 (1.27)
.260/.240
(6.60/6.10)
FOR 1/16"
THICK PC
BOARD
.070
(1.78)
.030 (0.76)
MAX
.100 (2.54) MIN
SOLDER
.200 ± .020
(5.08 ± .51) MIN
.091/.098
(2.31/2.49)
DIA 2 PLACES
3.700 (93.98)
.275 (6.99)
63 EQUAL SPACES
AT .050 (1.27)
(TYP)
.020/.032 (0.51/0.81)
PATTERN SHOWN IS THE SAME
ON BOTH SIDES OF PC BOARD
.250 (6.35) MIN .128 (3.25) MAX
.250
(6.3)
.091/.098
(2.31/2.49)
DIA 2 PLACES
.465 (11.81)
MAX
.190 (4.83)
DIA 2 PLACES
.035 (0.89)
.098/.091(2.49/2.31)
DIA C’BORE .187 2
PLACES
.190 (4.83)
DIA 2 PLACES
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-5 E-Mail: sales@glenair.com
N
MWEB Series EdgeBoard Connectors
MWEB-128S Right Angle Board Connector
PC Board
Contact Tail
.019” (0.49) Diameter Copper
Wire, Solder Dipped
Rigid Epoxy Potting
Compound
Liquid Crystal Polymer
Dielectric
Liquid Crystal
Polymer Tray,
Epoxy Filled
Micro
Socket
Contact
Aluminum Shell, Electroless
Nickel Plated
MWEB2L-128SBR- .125
Base Part Number
PC Tail Length
.090
.125
.190
.250 3.950 ± .015
(100.33 ± 0.38)
3.700 (93.98)
3.41 ± .010
(86.61 ± 0.25)
.191
.265 (6.73)
MAX.
PIN # B64
PIN # A64
PIN # A1
PIN # B1
.050 (1.27) TYP.
.050 (1.27)
.25
(6.3)
.091/.098
(2.31/2.49)
DIA 2 PLACES
B1
A1
A64
A64
.40 (10.2)
.775 (19.69) MAX
.30 (7.6)
.180 ± .005
4.57 ± 0.13)
TAIL LENGTH
± .015 (0.38)
Ø.098/.091(2.49/2.31)
DIA C’BORE .190
(4.83) 2 PLACES
.091/.098
(2.31/2.49)
DIA 2 PLACES
3.700 (93.98)
.275 (6.99)
.075 (1.91)
.075 (1.91)
.075 (1.91)
63 EQUAL SPACES
AT .050 (1.27)
(TYP)
CONNECTOR MATING FACE THIS SIDE
B64 B4 B2
B5 B3 B1
A4 A2
A3 A1
B63
A64
A63
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
MWEB-128S RIGHT ANGLE PCB CONNECTOR
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-6 E-Mail: sales@glenair.com
MWEB-184P BACKPLANE THRU-HOLE CONNECTOR
Part Number MWEB2L-184NP5W4-.375
MWEB Series EdgeBoard Connectors
MWEB-184P Vertical Mount Backplane Connector
.277/.263
(7.04/6.68)
.400 (10.1)
± .010 (0.25)
.190/.180
(4.83/4.57)
.300/.250
(7.62/6.35)
.375/.325
(9.52/8.26) .075
(1.91)
.017/.021
(0.43/0.53)
2.775 (70.49)
5.550 (140.97)
.275 (6.99)
.0375 (0.96)
.091/.098
(2.31/2.49)
DIA 3 PLACES
.250
(6.35) .250
(6.35)
.075
(1.91)
.075 (1.91)
.075 (1.91) TYP
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
A1
A3
A2
A4
B3 B1
B2
B4
A45
A46
A47
A92
B92
A48
B47
B48
B45
B46
184 X Ø.040 (1.02) PTH
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
5.800 ± .015
(147.32 ± 0.38)
5.550 (140.97)
5.222/5.214
(132.64/63.86)
2.775 ± .005
(70.49 ± 0.13)
.091/.098
(2.31/2.49)
DIA 3 PLACES
.191
.265 (6.73)
MAX.
PIN # B1
PIN # A1
PIN # A92
PIN # B92 .050 (1.27)
.050 (1.27)
TYP.
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-7 E-Mail: sales@glenair.com
N
MWEB-184S STRADDLE MOUNT CARDEDGE CONNECTOR
Part Number MWEB2L-184NS4BS3
MWEB Series EdgeBoard Connectors
MWEB-184S Straddle Mount Cardedge Connector
2.775 ± .005
(70.49 ± 0.13)
.277/.263
(7.04/6.68)
.091/.098
(2.31/2.49)
DIA 3 PLACES
.465 (11.81)
MAX
.190 (4.83)
DIA 3 PLACES
.260/.240
(6.60/6.10)
.070
(1.78) FOR 1/16"
THICK PC
BOARD
.030 (0.76)
MAX
.100 (2.54) MIN
SOLDER
.200 ± .020
(5.08 ± .51) MIN
.091/.098
(2.31/2.49)
DIA 3 PLACES 2.775 (70.49)
5.550 (140.97)
.275 (6.99)
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
.020/.032 (0.51/0.81)
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
.250 (6.35) MIN
.275
(6.99) .275
(6.99)
.128 (3.25) MAX
PATTERN SHOWN IS THE SAME
ON BOTH SIDES OF PC BOARD
5.800 ± .015
(147.32 ± 0.38)
5.550 (140.97)
5.33 (135.38)
MAX
.191
.265
(6.73)
MAX.
PIN # A1
PIN # B1
PIN # B92
PIN # A92 .050 (1.27)
TYP.
.050 (1.27)
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-8 E-Mail: sales@glenair.com
MWEB Series EdgeBoard Connectors
MWEB-184S Right Angle Board Connector
PC Board
Contact Tail
.019” (0.49) Diameter Copper
Wire, Solder Dipped
Rigid Epoxy Potting
Compound
Liquid Crystal Polymer
Dielectric
Liquid Crystal
Polymer Tray,
Epoxy Filled
Micro
Socket
Contact
Aluminum Shell, Electroless
Nickel Plated
MWEB2L-184NSBR- .125
Base Part Number
PC Tail Length
.090
.125
.190
.250
5.800 ± .015
(147.32 ± 0.38)
5.550 (140.97)
5.33 (135.38)
MAX
.191
.265 (6.73) MAX.
PIN # B92
PIN # A92
PIN # A1
PIN # B1
.050 (1.27) TYP.
.050 (1.27)
2.775 ± .005
(70.49 ± 0.13)
.091/.098
(2.31/2.49)
DIA 3 PLACES
.25
(6.3)
.40 (10.2)
.775 (19.69) MAX
.30 (7.6)
.180 ± .005
4.57 ± 0.13)
B92
B47
B46
A47
A46
A1 A2
B1
B2
2.775 (70.49)
5.550 (140.97)
.275 (6.99)
.091/.098
(2.31/2.49)
DIA 3 PLACES
.075 (1.91)
.075 (1.91) TYP
.075 (1.91) TYP
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
.250
(6.35)
.250
(6.35)
184 X Ø.040
(1.02) PTH
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
B1
B2
B46
B48
B47
A48
A47
B92
B91
A92
A91
B45
A46
A45
B3
A3
A2
A1
MWEB-184S RIGHT ANGLE PCB CONNECTOR
TAIL LENGTH
± .015 (0.38)
.098/.091(2.49/2.31)
DIA C’BORE .190
(4.83) 3 PLACES
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-9 E-Mail: sales@glenair.com
N
MWEB Series EdgeBoard Connectors
MWEB Pre-Wired and Solder Cup Connectors
MWEB EdgeBoard Connectors For Input/Output Wire-
To-Board Applications
With 128 or 184 contacts, these narrow profi le factory-
terminated MWEB connectors provide a space-saving
I/O wire to board solution. Connector width of .25 inch
(6.4 mm.) allows for high-density card slots.
HOW TO ORDER MWEB PIGTAIL CONNECTORS
Series Layout
Contact
Type
Wire Gage
(AWG) Wire Type Wire Color
Wire
Length
Inches Hardware Option
MWEB2L 128
184N
P – Pin
S – Socket
4 – #24
6 – #26
8 – #28
0 – #30
KM22759/11
600 Vrms Tefl on® (TFE)
JM22759/33®
600 Vrms Modifi ed Cross-
Linked Tefzel (ETFE)
1White
2Yellow
7Ten Color
Repeating
18
Total Length
In Inches. “18”
Specifi es 18
Inches.
NNo hardware
JJackscrews
PJackposts
Sample Part Number
MWEB2L – 128 P – 6 K 7 24 N
HOW TO ORDER MWEB SOLDER CUP CONNECTORS
Series Layout Contact Type Termination Type Hardware Option
MWEB2L 128
184N
P– Pin
S– Socket
S – Solder Cup NNo hardware
JJackscrews
PJackposts
Sample Part Number
MWEB2L 128 P S N
High Performance TwistPin Contacts
Suitable for airborne avionics processors and mission-
critical computers, these pre-wired connectors
feature interfacial seals and backpotting for improved
environmental protection. Or, choose solder cup
connectors for integration into wire harnesses.
© 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com N-10 E-Mail: sales@glenair.com
MWEB Series EdgeBoard Connectors
MWEB Hardware Kits
MWEB HARDWARE KITS
MWEB Jackscrew and Jackpost Kits
Stainless steel jackscrew kits are stainless steel and install
with roll pins. Insert the stud through the fl ange from the
mating side, then install the knurled head from the other side
and attach to stud with a roll pin. Each kit contains two studs,
two heads and two retainer pins.
Jackscrew Part Number (xx)
Jackpost Part Number (xx)
MWEB Polarizing Keys
These stainless steel pol keys meet the requirements of
MIL-C-55302/124-01. (6) keying positions per end equals (36)
total positions. Install with roll pins, supplied. Half-hex keys
are tapped for optional #2-56 screw installation. Kit consists
of (2) keys and (4) retainer pins.
Part Number 080-00-00-810
Jackscrew Kit
RECEPTACLE SHELL
PLUG SHELL
RETAINING PINS
(4) SUPPLIED
HEX KEY
(2) SUPPLIED
#2-56 UNC-2A SCREW
CUSTOMER FURNISHED